From 6ead32f737f39e3d82e1484a9d31f07ed2daeadb Mon Sep 17 00:00:00 2001 From: Alexandru Avadanii Date: Fri, 24 Nov 2017 20:28:01 +0100 Subject: Add pre-{install,purge} support for base image Extend and its invocation from with support for modifying foundation node VMs base image prior to using it with: - additional APT GPG keys; - additional APT repos; - packages to pre-install; - packages to pre-remove; - (non-configurable) cloud init datasource via NoCloud only, so VCP VMs won't wait for metadata service; While at it, re-use the resulting image as a base for another round of pre-patching (same operations as above are supported) to provide a base image for VCP VMs. Add AArch64-specific configuration based on new mechanisms: - pre-install linux-image-generic-hwe-16.04-edge (and headers) for foundation node and VCP (common) image (also requires new repo and its key); - pre-install cloud-init for VCP image (it should already be installed, but script needs non-empty config for VCP to create the VCP image and transfer it over to Salt Master); NOTE: cloud-init is required on VCP VMs for DHCP on 1st iface. JIRA: FUEL-309 Change-Id: I7dcaf0ffd9c57009133c6d339496ec831ab14375 Signed-off-by: Alexandru Avadanii --- .gitignore | 1 + ci/deploy.sh | 23 +++- mcp/config/scenario/defaults-aarch64.yaml | 18 +++ .../cluster/all-mcp-ocata-common/aarch64/init.yml | 2 +- mcp/scripts/lib.sh | 137 ++++++++++++++++++++- mcp/scripts/salt.sh | 12 ++ 6 files changed, 185 insertions(+), 8 deletions(-) diff --git a/.gitignore b/.gitignore index 4e90f3248..38b444007 100644 --- a/.gitignore +++ b/.gitignore @@ -13,3 +13,4 @@ **/mcp/scripts/mcp.rsa* **/mcp/scripts/user-data.sh **/mcp/scripts/net_mcpcontrol.xml +**/mcp/scripts/*.img diff --git a/ci/deploy.sh b/ci/deploy.sh index b13e18e7e..427850fda 100755 --- a/ci/deploy.sh +++ b/ci/deploy.sh @@ -15,6 +15,7 @@ do_exit () { local RC=$? clean + cleanup_mounts if [ ${RC} -eq 0 ]; then notify "\n[OK] MCP: Openstack installation finished succesfully!\n\n" 2 else @@ -158,6 +159,7 @@ NO_DEPLOY_ENVIRONMENT=${NO_DEPLOY_ENVIRONMENT:-0} ERASE_ENV=${ERASE_ENV:-0} source "${DEPLOY_DIR}/globals.sh" +source "${DEPLOY_DIR}/lib.sh" # # END of variables to customize @@ -340,7 +342,6 @@ fi # Get required infra deployment data set +x -source lib.sh eval "$(parse_yaml "${SCENARIO_DIR}/defaults-$(uname -i).yaml")" eval "$(parse_yaml "${SCENARIO_DIR}/${DEPLOY_TYPE}/${DEPLOY_SCENARIO}.yaml")" eval "$(parse_yaml "${LOCAL_PDF_RECLASS}")" @@ -358,6 +359,23 @@ for node in "${virtual_nodes[@]}"; do done virtual_nodes_data=${virtual_nodes_data%|} +# Serialize repos, packages to (pre-)install/remove for: +# - foundation node VM base image (virtual: all VMs, baremetal: cfg01|mas01) +# - virtualized control plane VM base image (only when VCP is used) +base_image_flavors=common +if [[ "${cluster_states[*]}" =~ virtual_control ]]; then + base_image_flavors+=" control" +fi +for sc in ${base_image_flavors}; do + for va in apt_keys apt_repos pkg_install pkg_remove; do + key=virtual_${sc}_${va} + eval "${key}=\${${key}[@]// /|}" + eval "${key}=\${${key}// /,}" + virtual_repos_pkgs+="${!key}^" + done +done +virtual_repos_pkgs=${virtual_repos_pkgs%^} + # Expand reclass and virsh network templates for tp in "${RECLASS_CLUSTER_DIR}/all-mcp-ocata-common/opnfv/"*.template \ net_*.template; do @@ -413,7 +431,8 @@ elif [ ${USE_EXISTING_INFRA} -gt 0 ]; then check_connection else generate_ssh_key - prepare_vms "${base_image}" "${STORAGE_DIR}" "${virtual_nodes[@]}" + prepare_vms "${base_image}" "${STORAGE_DIR}" "${virtual_repos_pkgs}" \ + "${virtual_nodes[@]}" create_networks "${OPNFV_BRIDGES[@]}" create_vms "${STORAGE_DIR}" "${virtual_nodes_data}" "${OPNFV_BRIDGES[@]}" update_mcpcontrol_network diff --git a/mcp/config/scenario/defaults-aarch64.yaml b/mcp/config/scenario/defaults-aarch64.yaml index 24a4037b4..d9898191e 100644 --- a/mcp/config/scenario/defaults-aarch64.yaml +++ b/mcp/config/scenario/defaults-aarch64.yaml @@ -11,3 +11,21 @@ virtual: default: vcpus: 6 ram: 4096 + common: + apt: + keys: + - https://linux.enea.com/mcp-repos/ocata/xenial/archive-mcpocata.key + repos: + # deb [arch=] + - armband_openstack 1100 deb [arch=arm64] http://linux.enea.com/mcp-repos/ocata/xenial ocata main + - armband_mk_openstack 1100 deb [arch=arm64] http://linux.enea.com/apt-mk/xenial nightly ocata + # NOTE(armband): Empty repo, keep commented out as reference + # - armband_mcp_extra 1100 deb [arch=arm64] http://linux.enea.com/apt-mk/xenial nightly extra + pkg: + install: + - linux-image-generic-hwe-16.04-edge + - linux-headers-generic-hwe-16.04-edge + control: + pkg: + install: + - cloud-init diff --git a/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml b/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml index b5b78ec08..0350afa3d 100644 --- a/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml +++ b/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml @@ -8,7 +8,7 @@ --- parameters: _param: - salt_control_xenial_image: https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-arm64-uefi1.img + salt_control_xenial_image: salt://salt/files/control/images/base_image_opnfv_fuel_vcp.img # VMs spawned on Foundation Node / Jump Host net ifaces (max 4) opnfv_fn_vm_primary_interface: enp1s0 diff --git a/mcp/scripts/lib.sh b/mcp/scripts/lib.sh index c6d5d26ce..654f45e1f 100644 --- a/mcp/scripts/lib.sh +++ b/mcp/scripts/lib.sh @@ -1,4 +1,5 @@ #!/bin/bash -e +# shellcheck disable=SC2155,SC1001 ############################################################################## # Copyright (c) 2017 Mirantis Inc., Enea AB and others. # All rights reserved. This program and the accompanying materials @@ -11,7 +12,6 @@ # function generate_ssh_key { - # shellcheck disable=SC2155 local mcp_ssh_key=$(basename "${SSH_KEY}") local user=${USER} if [ -n "${SUDO_USER}" ] && [ "${SUDO_USER}" != 'root' ]; then @@ -35,6 +35,110 @@ function get_base_image { wget -P "${image_dir}" -N "${base_image}" } +function mount_image { + local image=$1 + local image_dir=$2 + OPNFV_MNT_DIR="${image_dir}/ubuntu" + + sudo modprobe nbd loop + # Find free nbd, loop devices + for dev in '/sys/class/block/nbd'*; do + if [ "$(cat "${dev}/size")" = '0' ]; then + OPNFV_NBD_DEV=/dev/$(basename "${dev}") + break + fi + done + OPNFV_LOOP_DEV=$(losetup -f) + export OPNFV_MNT_DIR OPNFV_LOOP_DEV + [ -n "${OPNFV_NBD_DEV}" ] && [ -n "${OPNFV_LOOP_DEV}" ] || exit 1 + sudo qemu-nbd --connect="${OPNFV_NBD_DEV}" --aio=native --cache=none \ + "${image_dir}/${image}" + sleep 5 # /dev/nbdNp1 takes some time to come up + # grub-update does not like /dev/nbd*, so use a loop device to work around it + # Hardcode partition index to 1, unlikely to change for Ubuntu UCA image + sudo losetup "${OPNFV_LOOP_DEV}" "${OPNFV_NBD_DEV}p1" + mkdir -p "${OPNFV_MNT_DIR}" + sudo mount "${OPNFV_LOOP_DEV}" "${OPNFV_MNT_DIR}" + sudo mount -t proc proc "${OPNFV_MNT_DIR}/proc" + sudo mount -t sysfs sys "${OPNFV_MNT_DIR}/sys" + sudo mount -o bind /dev "${OPNFV_MNT_DIR}/dev" + sudo mkdir -p "${OPNFV_MNT_DIR}/run/resolvconf" + sudo cp /etc/resolv.conf "${OPNFV_MNT_DIR}/run/resolvconf" + echo "GRUB_DISABLE_OS_PROBER=true" | \ + sudo tee -a "${OPNFV_MNT_DIR}/etc/default/grub" +} + +function apt_repos_pkgs_image { + local apt_key_urls=(${1//,/ }) + local all_repos=(${2//,/ }) + local pkgs_i=(${3//,/ }) + local pkgs_r=(${4//,/ }) + [ -n "${OPNFV_MNT_DIR}" ] || exit 1 + + # APT keys + if [ "${#apt_key_urls[@]}" -gt 0 ]; then + for apt_key in "${apt_key_urls[@]}"; do + sudo chroot "${OPNFV_MNT_DIR}" /bin/bash -c \ + "wget -qO - '${apt_key}' | apt-key add -" + done + fi + # Additional repositories + for repo_line in "${all_repos[@]}"; do + # ||deb|[arch=]||| + local repo=(${repo_line//|/ }) + [ "${#repo[@]}" -gt 5 ] || continue + # NOTE: Names and formatting are compatible with Salt linux.system.repo + cat <<-EOF | sudo tee "${OPNFV_MNT_DIR}/etc/apt/preferences.d/${repo[0]}" + + Package: * + Pin: release a=${repo[-2]} + Pin-Priority: ${repo[1]} + + EOF + echo "${repo[@]:2}" | sudo tee \ + "${OPNFV_MNT_DIR}/etc/apt/sources.list.d/${repo[0]}.list" + done + # Install packages + if [ "${#pkgs_i[@]}" -gt 0 ]; then + sudo DEBIAN_FRONTEND="noninteractive" \ + chroot "${OPNFV_MNT_DIR}" apt-get update + sudo DEBIAN_FRONTEND="noninteractive" FLASH_KERNEL_SKIP="true" \ + chroot "${OPNFV_MNT_DIR}" apt-get install -y "${pkgs_i[@]}" + fi + # Remove packages + if [ "${#pkgs_r[@]}" -gt 0 ]; then + sudo DEBIAN_FRONTEND="noninteractive" FLASH_KERNEL_SKIP="true" \ + chroot "${OPNFV_MNT_DIR}" apt-get purge -y "${pkgs_r[@]}" + fi + # Disable cloud-init metadata service datasource + sudo mkdir -p "${OPNFV_MNT_DIR}/etc/cloud/cloud.cfg.d" + echo "datasource_list: [ NoCloud, None ]" | sudo tee \ + "${OPNFV_MNT_DIR}/etc/cloud/cloud.cfg.d/95_real_datasources.cfg" +} + +function cleanup_mounts { + # Remove any mounts, loop and/or nbd devs created while patching base image + if [ -n "${OPNFV_MNT_DIR}" ] && [ -d "${OPNFV_MNT_DIR}" ]; then + if [ -f "${OPNFV_MNT_DIR}/boot/grub/grub.cfg" ]; then + # Grub thinks it's running from a live CD + sudo sed -i -e 's/^\s*set root=.*$//g' -e 's/^\s*loopback.*$//g' \ + "${OPNFV_MNT_DIR}/boot/grub/grub.cfg" + fi + sudo rm -f "${OPNFV_MNT_DIR}/run/resolvconf/resolv.conf" + sync + if mountpoint -q "${OPNFV_MNT_DIR}"; then + sudo umount -l "${OPNFV_MNT_DIR}" || true + fi + fi + if [ -n "${OPNFV_LOOP_DEV}" ] && \ + losetup "${OPNFV_LOOP_DEV}" 1>&2 > /dev/null; then + sudo losetup -d "${OPNFV_LOOP_DEV}" + fi + if [ -n "${OPNFV_NBD_DEV}" ]; then + sudo qemu-nbd -d "${OPNFV_NBD_DEV}" || true + fi +} + function cleanup_uefi { # Clean up Ubuntu boot entry if cfg01, kvm nodes online from previous deploy # shellcheck disable=SC2086 @@ -60,22 +164,45 @@ function cleanup_vms { function prepare_vms { local base_image=$1; shift local image_dir=$1; shift + local repos_pkgs_str=$1; shift # ^-sep list of repos, pkgs to install/rm local vnodes=("$@") + local image=base_image_opnfv_fuel.img cleanup_uefi cleanup_vms get_base_image "${base_image}" "${image_dir}" + + rm -f "${image_dir}/${image%.*}"* + if [[ ! "${repos_pkgs_str}" =~ ^\^+$ ]]; then + IFS='^' read -r -a repos_pkgs <<< "${repos_pkgs_str}" + cp "${image_dir}/${base_image/*\/}" "${image_dir}/${image}" + mount_image "${image}" "${image_dir}" + apt_repos_pkgs_image "${repos_pkgs[@]:0:4}" + cleanup_mounts + else + ln -sf "${image_dir}/${base_image/*\/}" "${image_dir}/${image}" + fi + + # CWD should be # shellcheck disable=SC2016 envsubst '${SALT_MASTER},${CLUSTER_DOMAIN}' < \ user-data.template > user-data.sh + # Create config ISO and resize OS disk image for each foundation node VM for node in "${vnodes[@]}"; do - # create/prepare images ./create-config-drive.sh -k "$(basename "${SSH_KEY}").pub" -u user-data.sh \ -h "${node}" "${image_dir}/mcp_${node}.iso" - cp "${image_dir}/${base_image/*\/}" "${image_dir}/mcp_${node}.qcow2" + cp "${image_dir}/${image}" "${image_dir}/mcp_${node}.qcow2" qemu-img resize "${image_dir}/mcp_${node}.qcow2" 100G done + + # VCP VMs base image specific changes + if [[ ! "${repos_pkgs_str}" =~ \^{3}$ ]] && [ -n "${repos_pkgs[*]:4}" ]; then + mount_image "${image}" "${image_dir}" + apt_repos_pkgs_image "${repos_pkgs[@]:4:4}" + cleanup_mounts + ln -sf "${image_dir}/${image}" "${image_dir}/${image%.*}_vcp.img" + fi } function create_networks { @@ -100,6 +227,8 @@ function create_networks { function create_vms { local image_dir=$1; shift + # vnode data should be serialized with the following format: + # ',,|,,[...]' IFS='|' read -r -a vnodes <<< "$1"; shift local vnode_networks=("$@") @@ -139,9 +268,7 @@ function create_vms { function update_mcpcontrol_network { # set static ip address for salt master node, MaaS node - # shellcheck disable=SC2155 local cmac=$(virsh domiflist cfg01 2>&1| awk '/mcpcontrol/ {print $5; exit}') - # shellcheck disable=SC2155 local amac=$(virsh domiflist mas01 2>&1| awk '/mcpcontrol/ {print $5; exit}') virsh net-update "mcpcontrol" add ip-dhcp-host \ "" --live diff --git a/mcp/scripts/salt.sh b/mcp/scripts/salt.sh index ab096f3ee..b719aa8ae 100755 --- a/mcp/scripts/salt.sh +++ b/mcp/scripts/salt.sh @@ -18,6 +18,8 @@ OPNFV_TMP_DIR="/home/${SALT_MASTER_USER}/opnfv" OPNFV_GIT_DIR="/root/opnfv" OPNFV_FUEL_DIR="/root/fuel" OPNFV_RDIR="reclass/classes/cluster/all-mcp-ocata-common" +OPNFV_VCP_IMG="mcp/scripts/base_image_opnfv_fuel_vcp.img" +OPNFV_VCP_DIR="/srv/salt/env/prd/salt/files/control/images" LOCAL_GIT_DIR="${F_GIT_ROOT%${F_GIT_SUBD}}" LOCAL_PDF_RECLASS=$1 NODE_MASK='*' @@ -34,6 +36,11 @@ if [ -n "${LOCAL_PDF_RECLASS}" ] && [ -f "${LOCAL_PDF_RECLASS}" ]; then rsync -e "ssh ${SSH_OPTS}" "${LOCAL_PDF_RECLASS}" \ "${remote_tmp}${F_GIT_SUBD}/mcp/${OPNFV_RDIR}/opnfv/" fi +local_vcp_img=$(dirname "${LOCAL_PDF_RECLASS}")/$(basename "${OPNFV_VCP_IMG}") +if [ -e "${local_vcp_img}" ]; then + rsync -L -e "ssh ${SSH_OPTS}" "${local_vcp_img}" \ + "${remote_tmp}${F_GIT_SUBD}/${OPNFV_VCP_IMG}" +fi # ssh to cfg01 # shellcheck disable=SC2086,2087 @@ -95,4 +102,9 @@ ssh ${SSH_OPTS} "${SSH_SALT}" bash -s -e << SALT_INSTALL_END salt -C "${NODE_MASK} and not cfg01*" pkg.upgrade refresh=False salt -C "${NODE_MASK} or cfg01*" state.sls ntp + + if [ -f "${OPNFV_FUEL_DIR}/${OPNFV_VCP_IMG}" ]; then + mkdir -p "${OPNFV_VCP_DIR}" + mv "${OPNFV_FUEL_DIR}/${OPNFV_VCP_IMG}" "${OPNFV_VCP_DIR}/" + fi SALT_INSTALL_END -- cgit 1.2.3-korg