summaryrefslogtreecommitdiffstats
path: root/mcp
AgeCommit message (Collapse)AuthorFilesLines
2018-02-06lib.sh: modprobe br_netfilter, don't bail on errAlexandru Avadanii1-4/+7
Some sysadmins or distro defaults might blacklist br_netfilter, or it might not be loaded at deploy start, account for these corner cases too. JIRA: FUEL-334 Change-Id: I3ca6cb3848df8d2af1625ff4e3816efe8b320886 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[baremetal] Rename all to drop baremetal prefixAlexandru Avadanii79-238/+238
A few things differ between baremetal and virtual nodes: - provisioning method; - network setup; Since now we support completely dynamic network config based on PDF + IDF, as well as dynamic provisioning of VMs on jumpserver (as virtual cluster nodes), respectively MaaS-driven baremetal provisioning, let's drop the 'baremetal-' prefix from cluster model names and prepare for unified scenarios. Note that some limitations still apply, e.g. virtual nodes are spawned only on jumpserver (localhost) for now. JIRA: FUEL-310 Change-Id: If20077ac37c6f15961468abc58db7e16f2c29260 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[virtual] PDF-based network defs for cluster nodesAlexandru Avadanii15-318/+220
Decouple virtual cluster nodes (ctl, gtw etc.) from opnfv_fn_* vars in favor of parsing PDF/IDF. This is the first step towards unifying baremetal and virtual network definition templates, as well as allowing virtual nodes to run on a remote hypervisor (and eventually with a different arch). opnfv_fn_* vars will still be used for infra VMs spawned on FN (cfg01 and optionally mas01). Adopt new 'net_map.j2' from Pharos submodule for new templates (virt), as well as old ones (baremetal). JIRA: FUEL-322 Change-Id: I150c2416566bbe42ea11cd00f12a8a7bf96776c2 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[virtual] Parameterize cluster model based on PDFAlexandru Avadanii16-80/+58
- 10.1.0.0/24 (internal): * 10.1.0.101 -> opnfv_openstack_compute_node01_tenant_address * 10.1.0.124 -> opnfv_openstack_gateway_node01_tenant_address - 172.16.10.0/24 (mgmt): * 172.16.10.11 -> opnfv_openstack_control_node01_address * 172.16.10.100 -> opnfv_infra_config_address * 172.16.10.101 -> opnfv_openstack_compute_node01_control_address * 172.16.10.111 -> opnfv_opendaylight_server_node01_single_address * 172.16.10.124 -> opnfv_openstack_gateway_node01_address - 10.16.0.0/24 (public): * 10.16.0.11 -> opnfv_openstack_control_node01_external_address * 10.16.0.101 -> opnfv_openstack_compute_node01_external_address * 10.16.0.124 -> opnfv_openstack_gateway_node01_external_address To re-use DPDK config baremetal template, move: - cluster.baremetal-mcp-pike-ovs-dpdk-ha.infra.config_pdf + cluster.all-mcp-arch-common.infra.config_dpdk_pdf Drop unused 'ceilometer_graphite_publisher_host' (172.16.10.107). JIRA: FUEL-322 Change-Id: I3aef3415bd696a7ae5b566af12af4733a50c2135 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[virtual] Change IP addrs to align with baremetalAlexandru Avadanii7-24/+24
To be able to re-use pod_config.yaml parameters generated based on PDF for both baremetal and virtual scenarios without forking it, we first need to align the IP addresses used in virtual deployments. Currently hard set values will be parameterized in an ulterior change. - 10.1.0.0/24 (internal): * 105 -> 101 (cmp01); 106 -> 102 (cmp02); * 110 -> 124 (gtw01); - 172.16.10.0/24 (mgmt): * 101 -> 11 (ctl01); * 105 -> 101 (cmp01); 106 -> 102 (cmp02); * 110 -> 124 (gtw01); - 10.16.0.0/24 (public): * 101 -> 11 (ctl01); * 105 -> 101 (cmp01); 106 -> 102 (cmp02); * 110 -> 124 (gtw01); JIRA: FUEL-322 Change-Id: I5d5def4e92c3462f1a34f73dde65ef7a262a5d62 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[virtual] Split 'pxebr' from 'mcpcontrol' netAlexandru Avadanii8-16/+66
- add new virsh managed network 'pxebr' (to mimic baremetal behavior on virtual PODs, this will be the equivalent of PXE/admin network); - connect 'pxebr' to 3rd interface for cfg01, mas01 for all deploys (used to be baremetal-specific), replacing 'internal'; - keep 'mcpcontrol' connected only to 'cfg01' (+ 'mas01' if present) for initial infrastructure bring-up (1st interface); - switch all virtual cluster nodes to 'pxebr' (1st interface); - use 'pxebr' for all Salt cluster nodes traffic, 'mcpcontrol' only for mas01<=>cfg01 Salt traffic; - convert <user-data.template> to jinja2 and expand it based on PDF instead of using `envsubst`; - split <user-data.sh.j2> into two versions, one for each network used for Salt traffic; - ci/deploy.sh: Read scenario data before template parsing for cluster domain variable, needed in virsh network def; - leave docs diagram refresh to later after all possible deploy types have settled; - limit keyserver proxy usage to nodes where the configured http proxy matches the first nameserver (true for all MaaS-provisioned nodes), so we can re-use the same pillar for FN VMs and baremetal nodes; - add PXE/admin IP on cfg01's 3rd interface and switch other vnodes `salt_master_host` to point to it; JIRA: FUEL-322 Change-Id: Ie4f7aedddf2ef81046f1127b377d88dce79f0fda Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[FN VM] Reboot VMs on jump, wait for all onlineAlexandru Avadanii5-14/+35
- apply `linux` state on cfg01 first, so PXE/admin IP is added and FN VM minions are available; - add barrier and wait for all FN VMs to register with cfg01; - use batch-mode execution while applying `linux.network` on FN VMs; - retry all states executed via <salt.sh> on FN VMs; JIRA: FUEL-310 Change-Id: I72e1c565370072500df1d486fe76e6315f583c75 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[PDF] Switch to generate_config, unify templatesAlexandru Avadanii9-39/+83
- move bash template handling (previously expanded via `envsubst`) to lib.sh; - move j2 template handling to lib.sh; - move virsh network templates to 'mcp/scripts/virsh_net' subdir; - switch virsh network templates from `envsubst` expansion to j2 and leverage generate_config.py, similar to PDF Fuel installer adapter; - add relevant runtime env vars (e.g. SALT_MASTER, MAAS_IP) on the fly to PDF, to consume them in templates like params coming from PDF; - parameterize virsh network definitions based on PDF (mgmt, public); JIRA: FUEL-322 Change-Id: Ib94e78fc4f25797b9354a0552e884104da5d0003 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05deploy.sh: Move notify() to globals.shAlexandru Avadanii1-0/+28
Extend `notify` to 4 variants: - notify_i = inline (no newline) colored output; - notify = `notify_i` + trailing '\n'; - notify_n = `notify` + extra '\n' before and after; - notify_e = `notify` + stderr output + exit; This allows us to remove '\n' and cleanup the code a bit. While at it, fix some 'NOTE' messages going to stderr instead of stdout. Change-Id: I682e3344ae9e307c4a68ab31c7766bc91b12ee58 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[vPDF] Use local-virtual1, unify pkg requirementsAlexandru Avadanii2-16/+16
Until PDF/IDF land in Pharos for all our virtual PODs, use a common vPDF we already provide as an example to mimic the old hardcoded behavior while leveraging PDF/IDF parameterization. As a consequence, python requirements previously only needed for baremetal should now also be installed for virtual deploys too. JIRA: FUEL-322 Change-Id: Ied1c907275285a9086450a15491ae516a0db1be2 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[vPDF] Add experimental vPOD lab configAlexandru Avadanii2-0/+206
JIRA: FUEL-322 Change-Id: I1482badbbbf66b4855faf6daf486520fc71e09b0 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[baremetal] Retire example pod_config.yamlAlexandru Avadanii1-111/+0
It is easier to just generate the `pod_config.yaml` file than to maintain it, so let's remove it. While at it, link sample PDF/IDF inside pharos git submodule, so we don't have to pass a different lab-config URI to use the sample. To generate pod_config.yml for the sample PDF/IDF: $ ./ci/deploy.sh -l local -p pod1 -s os-odl-nofeature-ha -d $ cat mcp/deploy/images/pod_config.yml JIRA: FUEL-322 Change-Id: If5898f92ef54bebc31d57f9632959e9093a89250 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-05[PDF] pod1: Refresh PDF, IDF examplesAlexandru Avadanii2-65/+66
Sync latest changes from pharos git repo for our sample PDF/IDF: - move net_config from PDF to IDF; - minor cleanup; JIRA: FUEL-322 Change-Id: If6865ac61a4942a1dd5daf7081fd8faa67e0e7bf Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-03Merge "[baremetal] Fix: wrong nic name idf index"Alexandru Avadanii2-2/+2
2018-02-02[baremetal] Fix: wrong nic name idf indexGuillermo Herrero2-2/+2
This was only affecting pod deployments with different board models, under the current limited support: - 3 KVMs will be same model and have the same NIC names - 2 Compute nodes will be the same model and have same NIC names For the computes nodes, br-mesh NIC name was wrong due to incorrect idf mapping Change-Id: I9685b35cb23b03be9fc0e6fe16c0712a9ad70e19 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2018-02-02Merge "deploy.sh: Disable net.bridge.bridge-nf-call"Michael Polenchuk1-0/+9
2018-02-02Revert "[FN VMs] remove graphics"Alexandru Avadanii13-35/+55
RHEL family virtualization tools reserve 02:00 PCI slot for VGA, even if 'nographics' is specified when creating the VM (in case the user wants to later hook a video card, which usually *requires* PCI slot2). Debian systems do not follow this rule (tested with libvirt 1.x, 2.x, 3.x), hence 1st NIC lands on PCI slot 2 (and get eth name 'ens2'). To align the behavior across all possible jumpserver distros, bring back the virtio video. This reverts commit 738f6c3b68d1179de1ff790f9e72c25f10874da4. Change-Id: Ifd855c12e04aec1ff0ab047b13f8081365741889 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-01deploy.sh: Disable net.bridge.bridge-nf-callAlexandru Avadanii1-0/+9
JIRA: FUEL-334 Change-Id: I6d2499053dcfb7f99593fcd5c948b569bdcb9c9b Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-02-01[baremetal] Allow MaaS timeouts to be set via IDFAlexandru Avadanii3-10/+2
Bump Pharos git submodule to pick up support for MaaS timeout parameterization, as well as new IDF for lf-pod2. Drop arch-specific MaaS timeouts, as they are now configurable on a per-POD basis. Sample usage (via IDF): idf: fuel: maas: # MaaS timeouts (in minutes) timeout_comissioning: 10 timeout_deploying: 15 Change-Id: I8fafa336b0bc64d705f6c2e40fc3dfb85672fb15 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-31Turn off Retpoline and KPTI protectionMichael Polenchuk6-28/+79
Based on Canonical research (https://goo.gl/QJykMa) there is low-risk of attack for private clouds environments, therefore turn off the related kernel patches & regain performance back. Change-Id: I661fa127241e327b07d21a29d58d584997607123 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-31Merge "[patch] Group APT calls for salt formula install"Michael Polenchuk2-2/+71
2018-01-31Merge "[VCP] Catch 'no response' when adding ssh auth key"Michael Polenchuk1-1/+1
2018-01-31[VCP] Catch 'no response' when adding ssh auth keyAlexandru Avadanii1-1/+1
On rare occassions, one or more minions might fail to respond in due time, so catch 'no reponse' using `wait_for`. Change-Id: I8e6b0dc44a39e79c2874ff9a657e152620ba3f13 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-30[patch] Group APT calls for salt formula installAlexandru Avadanii2-2/+71
When installing salt-formula-* on cfg01, we used to call APT for each package. Instead, handle them all at once. While at it, stop using colored output on terminals that don't support it (e.g. 'vt220' used by OPNFV Jenkins). Change-Id: Ib8f2cee9638c43cdf648487bf05b07cd49802d3e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-30Update reclass system modelMichael Polenchuk2-4/+5
Get the latest reclass system model to be in sync with salt formulas code. Adjust keystone v3 admin endpoint patch. Change-Id: Ia7ce6187b875cc9e18af2784ef1eb5df1c145c7d Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-29[patch] Point neutron opendaylight configs to pikeMichael Polenchuk1-12/+12
Change-Id: I3fae38da88b170b84ea926abf93da8b178e9ca8a Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-29Merge "[FN VMs] remove graphics"Alexandru Avadanii13-55/+35
2018-01-29Merge "[cfg01] apt.conf.d: Dpkg::Use-Pty: 0"Michael Polenchuk2-0/+9
2018-01-29[FN VMs] remove graphicsAlexandru Avadanii13-55/+35
Since VCP VMs (created via salt formula) do not have a video controller defined in their domain XMLs, network devices end on different PCI slots and hence have different names assigned (ens2+ vs foundation node VMs, which start with ens3). To align network interface names for VMs on jumpserver vs kvm nodes, and reduce confusion, remove the video controller from FN VMs. This allows some cleanup: - drop extra AArch64 args from virt-install; - unify 'opnfv_vcp_vm_*' and 'opnfv_fn_vm_*' variables; Change-Id: I0d108b00914b3eaaa03b67c652174f8ed4573118 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-28[cfg01] apt.conf.d: Dpkg::Use-Pty: 0Alexandru Avadanii2-0/+9
This will silence all 'Reading database ...' noise during Salt formula installation. Change-Id: I734d727194e276443db1e1581f40ec494562196e Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-26Merge "lib.sh: Reduce useless wget dot reporting"Alexandru Avadanii1-1/+1
2018-01-26[ovs/dpdk] Configure vxlan for baremetal scenarioMichael Polenchuk7-11/+55
* switch ovs/dpdk scenario from vlan to vxlan mode * force br-ex interface to mitigate race with incorrect state * remove dpdk packages list (already in upstream) Change-Id: Ib827cef2d67879fd2a86d286ca2118b22493274d Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-25lib.sh: Reduce useless wget dot reportingAlexandru Avadanii1-1/+1
Downloading the base image (usually a few hundred MB) outputs a lot of useless dots to show progress. Switch to 1M per dot (from 1K). Change-Id: I8c525cad0b46e8ba3a7f6da4dd7f8277a49df91f Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-25[baremetal] Fix openstack_compute_pdf yaml errAlexandru Avadanii1-2/+2
Fixes: 7c79115 Change-Id: I62f52382b297b1aa9cfc37f74f04a00872ead1ef Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-25Merge "Add support for different public network netmask"Alexandru Avadanii7-16/+34
2018-01-25Merge "[lab-config] Use Pharos submodule by default"Alexandru Avadanii8-121/+45
2018-01-25Merge "Horizon: Fix and reload missing css in Pike"Alexandru Avadanii2-0/+20
2018-01-24[lab-config] Use Pharos submodule by defaultAlexandru Avadanii8-121/+45
- switch from securedlab to pharos as lab-config structure; - accomodate the move net_config from PDF to IDF in j2 templates; Change-Id: Ib04e4fb384568a6efd9e78a080857b663521ae88 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-23Rectify ODL repository apt keyMichael Polenchuk2-16/+24
Change-Id: Iaa917be9f8f86c328ce4d503923a0d7cca680434 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-23Horizon: Fix and reload missing css in Piketing wu2-0/+20
The horizon in Pike release is broken due to missing the static content. This workaround is to: - create a missing symbolic link. The link is defined as an alias in the apache configuraion - collecting and compressing static assets - add single "Default" theme as AVAILABLE_THEMES - restart apache2 service - apply the workaround to Salt states 'openstack_ha' and 'openstack_noha' JIRA: FUEL-324 Change-Id: Idd70165f1be8d31967a3ab518323e6f3e8406624 Signed-off-by: ting wu <ting.wu@enea.com>
2018-01-22[baremetal] Fix ocata referenceAlexandru Avadanii3-2/+2
Previous cherry-pick failed to rename 'ocata' to 'pike'. JIRA: FUEL-317 Change-Id: Ic1a1145e0652f2a7d15980399232631cf3fc5080 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-22[baremetal] Add upstream (lab) proxy supportAlexandru Avadanii3-0/+26
If upstream proxy is defined in IDF, propagate it to pillar data: - linux:system:proxy:keyserver:http(s) for cfg01, mas01; - maas:region:upstream_proxy for mas01; Sample IDF config: idf: fuel: network: upstream_proxy: address: 10.0.2.2 port: 3128 JIRA: FUEL-317 Change-Id: I12be815e1b4564227fb09c20ce06cd71e7d433b6 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-22Add support for different public network netmaskGuillermo Herrero7-16/+34
- Remove hardcoded /24 mask - Use PDF as source for public network, with reclass params: opnfv_net_public, _mask, _gw, _pool_start, _pool_end JIRA: FUEL-315 Change-Id: Idf3a4ed8f63f58fa90d9c1dcb7751ef3b1c9bd36 Signed-off-by: Guillermo Herrero <guillermo.herrero@enea.com>
2018-01-22Merge "reclass: apt_mk_version: stable"Michael Polenchuk3-3/+3
2018-01-22Merge "[baremetal] Fix cmp proto dhcp on PXE/admin"Michael Polenchuk2-0/+8
2018-01-22[patch] system.repo: Add keyserver proxy supportAlexandru Avadanii6-8/+122
Instead of defining a http proxy for all salt-minion traffic, which also includes some Openstack API accesses we can't filter (no_proxy is not yet supported), add & leverage support for proxy configuration during APT keyserver access / key download. JIRA: FUEL-331 Change-Id: I9470807633596c610cfafb141b139ddda2ff096b Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-21[baremetal] Fix cmp proto dhcp on PXE/adminAlexandru Avadanii2-0/+8
Although we properly filter the PXE/admin interface in the common openstack_compute_pdf.yml.j2 template and use DHCP instead of manual setup, we failed to do the same in scenario-specific overrides (ODL, OVS), so we end up with 'proto: manual' on PXE/admin on cmp nodes. The fix is trivial and reuses the mechanism in the common class in scenario-specific templates (if interface is PXE/admin, use 'DHCP' instead of 'manual'). This solves the issue of broken connectivity to Salt master after cmp reboot. Change-Id: I1953d03343190acb2efcab4412a3d37e130b0ea9 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-21reclass: apt_mk_version: stableAlexandru Avadanii3-3/+3
Although previous commit d1b6119 changed the first reference of apt-mk repos to 'stable' from 'nightly', it missed the cluster model. This fixes redeploys with `-f`, which fail due to conflicts between already installed 'stable' packages and 'nightly' ones. Fixes: d1b6119 Change-Id: I854bac86feaaa61da0b68d158e270eec1ee0ccb7 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2018-01-19Get back to the GA kernelMichael Polenchuk2-3/+1
- openvswitch 2.8 officially supports kernel versions from 3.10 to 4.12 - ODL baremetal scenario is acting up with floating/public SNAT flow under hwe edge kernel 4.13 Change-Id: I099d528b3b1c2ea34f8f856cd60f809f90defea6 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2018-01-15Setup mongodb master primarilyMichael Polenchuk2-4/+4
Initiate mongodb master at first to avoid race conditaion with unwanted master election which causes cluster setup failure. Change-Id: I6d2f75f3f002849cac3a5f52a7dcfb4646b7822a Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>