summaryrefslogtreecommitdiffstats
path: root/deploy
AgeCommit message (Collapse)AuthorFilesLines
2016-08-24deploy: Delete old Fuel env if presentAlexandru Avadanii1-0/+15
In order to clean up old partitioning and boot entries on target nodes, before removing the Fuel Master, try ssh-ing into it and removing all environments/nodes. This is especially important for EFI systems, where old boot entries are left behind without a proper env delete, leading to target nodes failing to PXE boot on Fuel Master re-install. This change assumes that: - all Fuel Master information is unchanged between old and new deploy (fuel IP, password etc.); - Fuel Master is up and running, in a sane state (target nodes are also online), when deploy starts; Closes: ARMBAND-51 Change-Id: I7b61124ea9182ce2d599adcdedef03e0d8d67ed6 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-08-23Fix ovs scenario configurationMichal Skalski2-4/+4
Due the incorrect indentation install_dpdk option was not set to true. JIRA: OVSNFV-37 Change-Id: Ida3b0d1e72ce8322905ff399af89b43cac878299 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-08-18Tune up virtual envsMichael Polenchuk2-1/+36
* increase the memory/cpu of controller for noha case * reduce the memory of computes Change-Id: Iea9351bb846823fae64a662e92f894eca2f6cecb Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com>
2016-08-17Add config information as well to default labNikolas Hermanns2-1/+46
It is possible that some one changes the config of the vms from a virtual environment. This is already shown in the elx lab. To make everyone aware of this we push it to the default lab as well. Change-Id: I4e9012b3237838b98321472bb16037aa0aeacfdc Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2016-08-17deploy: Allow DEA to override bootstrap configAlexandru Avadanii2-3/+20
This commit does not change the current behavior in OPNFV, the preconfigured fuel_bootstrap_cli.yaml from OPNFV ISO is still used to replace the default settings / fuel-menu bootstrap cfg. The only addition is the possibility to override the preconfigured fuel_bootstrap_cli.yaml info using DEA. JIRA: FUEL-155 Change-Id: I4e66b789fdf0a5b1af512a3efc84fedb72ce3b05 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-08-17deploy-config: honor interfaces and transformationsJosep Puigdemont1-0/+23
Currently all scenarios assume interfaces and transformations are the same for all nodes in the POD, however some PODs may contain nodes that have different hardware, or where the interfaces are configured differently. In this patch we honor the original interfaces and transformations if they are present in the dea-override.yaml file. The way to add this information in the dea-override is by having a "nodes:" section with this information, ie: nodes: - id: 1 interfaces: interfaces_1 transformations: transformations_1 - id: 2 interfaces: interfaces_2 transformations: transformations_2 - id: 3 interfaces: interfaces_1 transformations: transformations_1 The node IDs is used to find out this information. Change-Id: If6ff8ca28b42e043d1bdf91142a4a56ae36e4304 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>
2016-08-17Merge "Use virtio driver for fuel-master NIC"Michal Skalski1-1/+1
2016-08-17Change log file permissionsPeter Barabas1-1/+1
Don't make it executable; don't make it world-writable. Change-Id: I5d117b39e70fff2c1cb5e62d017efe0387b9b5f4 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-08-17Use virtio driver for fuel-master NICMichal Skalski1-1/+1
Using e1000 driver on fuel master may lead to temporarily loss of communication [1]. We can use two approaches here: * use virtio driver * install e1000-kmod package virtio driver should be sufficient for our purposes, we don't use bonding on fuel master. e1000-kmod package is available on fuel master and provide e1000 kernel module which does not introduce additional problems. This package is not installed by default but for this purpose MASTER_NODE_EXTRA_PACKAGES cmdline option can be set during fuel master installation. [1] http://docs.openstack.org/developer/fuel-docs/userdocs/release-notes/fuel_known_issues.html Change-Id: I3fc1fed5f0b9c780cd9174205a3c31dae92a180e Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-08-12Merge "Filter out non-cluster nodes"Michal Skalski1-2/+2
2016-08-12Allign odl-sfc scenarios with new plugin versionMichal Skalski3-105/+23
ODL Boron use different set of sfc features. JIRA: FUEL-169 Change-Id: I38c1e518ffbf625a68f879779c01e4abfdb1d672 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-08-12Filter out non-cluster nodesMichael Polenchuk1-2/+2
In order to avoid fetching up non-cluster nodes filter them out by option of id. JIRA: FUEL-183 Signed-off-by: Michael Polenchuk <mpolenchuk@mirantis.com> Change-Id: If0d0a1480d648167f1bcf726f0d6d345d2e00711
2016-08-12Merge "KVM scenario updates"Michal Skalski1-7/+5
2016-08-12KVM scenario updatesJulien1-7/+5
1. Install CEPH_OSD on 2 compute nodes 2. Delete default 'net_segment_type: tun' definition, for it is already defined in dea_base.yaml, and it can be updated by lab dea files 3. Update osd_pool_size from 1 to 2 4. Michal indicates that https://review.openstack.org/#/c/342717/ set the limitation : Restrict usage of controller and osd role on single host Change-Id: I4907482391588fc21ecf60603b1c599413cbc531 Signed-off-by: Julien-zte <zhang.jun3g@zte.com.cn>
2016-08-11Merge "Fix merge_dicts logic for the case of two nonempty lists"Michal Skalski1-9/+11
2016-08-11Pass host cpu flags to compute guestsMichal Skalski1-0/+3
Both kvm and ovs plugins require specific cpu flags. Host-model mode will pass most of the host cpu flags to guest. If a hypervisor is not able to use the exact CPU model, libvirt automatically falls back to a closest model. JIRA: FUEL-157 Change-Id: I77ce625e118b6de51cbcdb58e4be5a6dcaecf384 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-08-10Merge "Revert "Pass host cpu flags to compute guests""Michal Skalski1-3/+0
2016-08-10Revert "Pass host cpu flags to compute guests"Michal Skalski1-3/+0
This reverts commit 34da00c2baa6abc69a812aae4c30a82ebae561bd. Change-Id: I495fa1f71ac30e259ca63e90ca8b38dd2300d469 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-08-10Merge "Provide access to mgmt network from host level"Michal Skalski4-24/+25
2016-08-10Fix merge_dicts logic for the case of two nonempty listsFedor Zhadaev1-9/+11
JIRA: FUEL-170 Change-Id: I5abae6fc950cdabe064b5402d9555cedf81cfc23 Signed-off-by: Fedor Zhadaev <fzhadaev@mirantis.com>
2016-08-10Pass host cpu flags to compute guestsMichal Skalski1-0/+3
Both kvm and ovs plugins require specific cpu flags. Host-model mode will pass most of the host cpu flags to guest. JIRA: FUEL-157 Change-Id: Iff620a4b4f5948e54f6f8db01411d6659f08ec00 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-08-10Provide access to mgmt network from host levelMichal Skalski4-24/+25
Functest framework is trying to access internal endpoints from host level which currently is not possible in virtual deployments. Move mgmt network to untagged interface and setup IP address from mgmt subnet on the linux bridge where mgmt traffic is traversing. There will be corresponding changes in securedlab repository. JIRA: FUEL-167 Change-Id: I29b8ebb23a64e39a4e56b27639a87ce2386b9774 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-08-04Fix OVS scenarios to use fuel-plugin-ovsFedor Zhadaev3-352/+78
* Use fuel-nshovs instead deprecated fuel-nfvovs * Modified scenario to enable DPDK via Fuel * Removed hard dependency from specific POD * Add ability to merge networks lists JIRA: FUEL-156 JIRA: FUEL-162 Change-Id: Ie609ff140f1de96e54df37dd9b1881afec792317 Depends-On: Ic6072d938e09a40516c32cdde6223d0a21e57403 Signed-off-by: Fedor Zhadaev <fzhadaev@mirantis.com>
2016-08-03Fix config for no-ha kvm scenarioMichal Skalski1-4/+4
JIRA: FUEL-157 Change-Id: I09e595902b2c467b5522b7b37a772f7ab35c8cea Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-08-02Merge "Add functionality to generate a base DEA file"Michal Skalski2-5/+55
2016-08-02Merge "Make it possible to include files in templates"Michal Skalski2-0/+110
2016-08-02Merge "Refactor deploy-config.py"Michal Skalski1-96/+147
2016-08-02Add functionality to generate a base DEA filePeter Barabas2-5/+55
- Add template file for base DEA Change-Id: I8055087b992fdc9850852bad9fa07a4e4fde0085 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-08-01Make it possible to include files in templatesPeter Barabas2-0/+110
Change-Id: I45c42ac65cfbe6562f0035df3375a2231148e22e Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-08-01Refactor deploy-config.pyPeter Barabas1-96/+147
- fix vertical whitespace - more consistent function naming - clean up file writes - break up some long lines - typo fixes - remove duplicate spaces - unify print's Change-Id: I5517747ef9f2e39ade7fb553ae2b1547fdf7b9e1 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-07-27Fix configuration for kvm scenarioMichal Skalski2-4/+38
JIRA: FUEL-157 Change-Id: I5baafd4395a2d298a24cccda042d5b43824ae7a0 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-07-26Merge "Fix default value for plugin metadata"Michal Skalski1-5/+2
2016-07-26Merge "Add ability to override node attributes"Michal Skalski1-2/+52
2016-07-22Add templating support for generating config filesPeter Barabas2-0/+446
- Remove unneeded method - Write result to a file and not STDOUT - Add documentation - Remove trailing whitespace - Documentation corrections Change-Id: I7532222d3512380c4f1129bd05dc2ba37b409dc2 Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-07-22Add ability to override node attributesFedor Zhadaev1-2/+52
Fixes https://jira.opnfv.org/browse/FUEL-152 Change-Id: I444bf3aef54ffd53c53431e2795b11b10545f55f Signed-off-by: Fedor Zhadaev <fzhadaev@mirantis.com>
2016-07-20Fix default value for plugin metadataFedor Zhadaev1-5/+2
Fix typo which result in error while getting default metadata in case if it's not overridden in scenario. Fixes https://jira.opnfv.org/browse/FUEL-151 Change-Id: Ibf40f846919155e27da5dc1f778f72afee79ff12 Signed-off-by: Fedor Zhadaev <fzhadaev@mirantis.com>
2016-07-12Aligning machine type over Ubuntu and CentosStefan K. Berg12-12/+12
We have previously used "pc-1.0" as the qemu-kvm machine definition for virtual Fuel deploys. On Ubuntu this points to: pc-1.0 Standard PC (i440FX + PIIX, 1996) On CentOS 7 this machine definition does not exist, but there's a match in "pc": pc RHEL 7.0.0 PC (i440FX + PIIX, 1996) (alias of pc-i440fx-rhel7.0.0 So, finally, pc is also in Ubuntu: pc Ubuntu 14.04 PC (i440FX + PIIX, 1996) (alias of pc-i440fx-trusty) This change is about exploring whether moving to "pc" will make the auto deploy work on both platforms with the "pc" machine type. What still needs to be done in CentOS is to create a symlink from /usr/libexec/qemu-kvm and /usr/bin/kvm though. Change-Id: I1cce52a21075950cb59b75709b12d724d759e3e6 Signed-off-by: Stefan K. Berg <stefan.k.berg@ericsson.com>
2016-07-08Merge "deploy: ISO rebuild: use -joliet-long names."Michal Skalski1-0/+1
2016-07-08Merge changes from topic 'multiple-nics-for-fuel-vm'Michal Skalski2-11/+21
* changes: deploy: add support for multiple bridges virtual_fuel: prepare class to allow multiple bridges
2016-07-08deploy: ISO rebuild: use -joliet-long names.Alexandru Avadanii1-0/+1
Armband adds similar files, which tend to have long names and only differ in suffixes (e.g. DEBs for amd64 vs arm64). Previous change [1] fixed ISO build errors, but failed to address the deploy.py ISO rebuild (which modifies and recreates the ISO, calling mkisofs, which complains about clashing file indexes). This works around ISO rebuild error(s) like: "genisoimage: Error: ./ubuntu/pool/main/g/golang-gogoprotobuf/golang-gogoprotobuf\ -dev_0.0~git20150828.0.6cab0cc-1~u14.04+mos1_arm64.deb and ./ubuntu/pool/main/g/golang-gogoprotobuf/golang-gogoprotobuf\ -dev_0.0~git20150828.0.6cab0cc-1~u14.04+mos1_amd64.deb have the same Joliet name" [1] https://gerrit.opnfv.org/gerrit/#/c/14973/ Change-Id: If58a18ba46343a52ce6e9a0a6a0482c1a3079451 Signed-off-by: Alexandru Avadanii <Alexandru.Avadanii@enea.com>
2016-07-04Plugin version is requiredMichal Skalski5-9/+19
Plugin version is required when plugin configuration is overwritten. Change-Id: I93af002ed5e994c90b9134f8c020a3822e81e42c Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-07-04Modify the indent in fuel-odl_0.9.0.yaml.wu.zhihui1-142/+142
Change-Id: I15bb84c35c075037df23746b75b108e2d7b90ede Signed-off-by: wu.zhihui <wu.zhihui1@zte.com.cn>
2016-07-01[BGPVPN] Uplift plugin to MitakaNikolas Hermanns3-15/+37
Change-Id: I9db366806ec97b44b0e537ee2d4beb3c8a968b92 Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2016-07-01Fix module versions for scenariosMichal Skalski6-7/+7
Change-Id: Ia5a5d008af717f9b2d0e7495bd2180cdad4075e8 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-06-30Use ODL Boron for SFCMichal Skalski5-578/+40
SFC scenario requires OpenDaylight Boron. ODL plugin will be built with both Beryllium and Boron. It will be possible to choose deployment with Boron instead of default Beryllium. Change-Id: I1abd22ddca16e710430accd40ad8359be1bd7132 Signed-off-by: Michal Skalski <mskalski@mirantis.com>
2016-06-30Uplift fuel and nshovs plugins configsNikolas Hermanns2-0/+194
Change-Id: I86cdef9d3e3337d1b16b9154c940f73b0a3d8567 Signed-off-by: Nikolas Hermanns <nikolas.hermanns@ericsson.com>
2016-06-26Add timeout for SCP operationsPeter Barabas1-2/+7
The default timeout for SCP is 5 seconds, which is not enough in some cases. Change-Id: If44669a96ea4b5ce33441eeea36b8cf66a1cdc4a Signed-off-by: Peter Barabas <peter.barabas@ericsson.com>
2016-06-20Override parameter attempts in Class Zte_Adapter.wu.zhihui1-2/+2
Give more attempts for zte hardware. Change-Id: I0906b6fe9e046ddd6436e5246494b89c812a40a2 Signed-off-by: wu.zhihui <wu.zhihui1@zte.com.cn>
2016-06-17add onos nofeature scenarion mapwuwb19893-0/+223
Change-Id: I5c7d9b712c66860bfbe923396e12641c17d439b5 Signed-off-by: wuwb1989 <wuwenbin2@huawei.com>
2016-06-17deploy: add support for multiple bridgesJosep Puigdemont2-4/+9
deploy.py: Some Fuel VMs may need more than one network interface. To be able to provide that, we now allow the user to specify the "-b" paramter (bridge) multiple times, creating a new NIC for each one of them. The NICs are created in the same order as they are given in the command line. There is no change in behavior from earlier versions, pxebr will still be the default bridge if none is specified in the command line. deploy.sh: To reflect the new capabilities of deploy.py, we introduce the possibility to specify -B more than once in deploy.sh, and honor that when calling deploy.py. We also make it possible to specify a comma separated list of bridges, as in: -B br1,br2. Change-Id: I1a0100f2cfe755ec6adfeedafb391c2357f46f51 Signed-off-by: Josep Puigdemont <josep.puigdemont@enea.com>