#!/bin/bash # cleanup_opendaylight() - Remove residual data files, anything left over # from previous runs that a clean run would need to clean up function cleanup_opendaylight { # Wipe out the data, journal and snapshots directories ... grumble grumble grumble rm -rf $ODL_DIR/$ODL_NAME/{data,journal,snapshots} # Remove existing logfiles if [[ -n "$LOGDIR" ]]; then rm -f "$LOGDIR/$ODL_KARAF_LOG_BASE*" fi if [[ -n "$SCREEN_LOGDIR" ]]; then rm -f "$SCREEN_LOGDIR/$ODL_KARAF_LOG_BASE*" fi rm -f "$DEST/logs/$ODL_KARAF_LOG_BASE*" move_interface_addresses "outof_bridge" unbind_opendaylight_controller } # configure_opendaylight() - Set config files, create data dirs, etc function configure_opendaylight { echo "Configuring OpenDaylight" # The logging config file in ODL local ODL_LOGGING_CONFIG=${ODL_DIR}/${ODL_NAME}/etc/org.ops4j.pax.logging.cfg # Add netvirt feature in Karaf, if it's not already there local ODLFEATUREMATCH=$(cat $ODL_DIR/$ODL_NAME/etc/org.apache.karaf.features.cfg | \ grep featuresBoot= | grep $ODL_NETVIRT_KARAF_FEATURE) if [ "$ODLFEATUREMATCH" == "" ]; then sed -i "/^featuresBoot=/ s/$/,$ODL_NETVIRT_KARAF_FEATURE/" \ $ODL_DIR/$ODL_NAME/etc/org.apache.karaf.features.cfg fi if [[ "$ODL_RELEASE" =~ "helium" ]]; then # Move Tomcat to $ODL_PORT local _ODLPORT=$(cat $ODL_DIR/$ODL_NAME/configuration/tomcat-server.xml | \ grep $ODL_PORT) if [ "$_ODLPORT" == "" ]; then sed -i "/\> $ODL_DIR/$ODL_NAME/etc/custom.properties fi # Configure L3 GW MAC if it's not there local L3GW_MAC=$(cat $ODL_DIR/$ODL_NAME/etc/custom.properties | \ grep ^ovsdb.l3gateway.mac) if [[ -z "$L3GW_MAC" && -n "$ODL_L3GW_MAC" ]]; then echo "ovsdb.l3gateway.mac=$ODL_L3GW_MAC" >> $ODL_DIR/$ODL_NAME/etc/custom.properties fi fi # Remove existing logfiles local ODL_LOGDIR=$DEST/logs if [[ -n "$LOGDIR" ]]; then ODL_LOGDIR=$LOGDIR fi rm -f "$ODL_LOGDIR/$ODL_KARAF_LOG_BASE*" # Log karaf output to a file _LF=$ODL_LOGDIR/$ODL_KARAF_LOG_NAME LF=$(echo $_LF | sed 's/\//\\\//g') # Soft link for easy consumption sudo mkdir -p "$ODL_LOGDIR" ln -sf $_LF "$ODL_LOGDIR/screen-karaf.log" if [[ -n $SCREEN_LOGDIR ]]; then ln -sf $_LF "$SCREEN_LOGDIR/screen-karaf.log" fi # Change the karaf logfile # disable log rotation by setting max fiel size large enough sed -i -e "/^log4j\.appender\.out\.file/ s/.*/log4j\.appender\.out\.file\=$LF/" \ -e "/^log4j\.appender\.out\.maxFileSize/ s/.*/log4j\.appender\.out\.maxFileSize\=1024GB/" \ $ODL_DIR/$ODL_NAME/etc/org.ops4j.pax.logging.cfg # Configure DEBUG logs for network virtualization in odl, if the user wants it if [ "${ODL_NETVIRT_DEBUG_LOGS}" == "True" ]; then local OVSDB_DEBUG_LOGS=$(cat $ODL_LOGGING_CONFIG | grep ^log4j.logger.org.opendaylight.ovsdb) if [ "${OVSDB_DEBUG_LOGS}" == "" ]; then echo 'log4j.logger.org.opendaylight.ovsdb = TRACE, out' >> $ODL_LOGGING_CONFIG echo 'log4j.logger.org.opendaylight.ovsdb.lib = INFO, out' >> $ODL_LOGGING_CONFIG echo 'log4j.logger.org.opendaylight.ovsdb.openstack.netvirt.impl.NeutronL3Adapter = DEBUG, out' >> $ODL_LOGGING_CONFIG echo 'log4j.logger.org.opendaylight.ovsdb.openstack.netvirt.impl.TenantNetworkManagerImpl = DEBUG, out' >> $ODL_LOGGING_CONFIG echo 'log4j.logger.org.opendaylight.ovsdb.openstack.netvirt.providers.openflow13.services.arp.GatewayMacResolverService = DEBUG, out' >> $ODL_LOGGING_CONFIG echo 'log4j.logger.org.opendaylight.ovsdb.plugin.md.OvsdbInventoryManager = INFO, out' >> $ODL_LOGGING_CONFIG fi if [[ "$ODL_RELEASE" =~ "helium" ]]; then local ODL_NEUTRON_DEBUG_LOGS=$(cat $ODL_LOGGING_CONFIG | \ grep ^log4j.logger.org.opendaylight.controller.networkconfig.neutron) if [ "${ODL_NEUTRON_DEBUG_LOGS}" == "" ]; then echo 'log4j.logger.org.opendaylight.controller.networkconfig.neutron = TRACE, out' >> $ODL_LOGGING_CONFIG fi else local ODL_NEUTRON_DEBUG_LOGS=$(cat $ODL_LOGGING_CONFIG | \ grep ^log4j.logger.org.opendaylight.neutron) if [ "${ODL_NEUTRON_DEBUG_LOGS}" == "" ]; then echo 'log4j.logger.org.opendaylight.neutron = TRACE, out' >> $ODL_LOGGING_CONFIG fi fi fi } # configure_neutron_opendaylight() - Set Neutron config files according to ODL settings function configure_neutron_odl { echo "Configuring ML2 for OpenDaylight" populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl url=$ODL_ENDPOINT populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl username=$ODL_USERNAME populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl password=$ODL_PASSWORD populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl port_binding_controller=$ODL_PORT_BINDING_CONTROLLER # When it's not set, the default value is set by networking-odl if [[ -n "$ODL_HOSTCONF_URI" ]]; then populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl odl_hostconf_uri=$ODL_HOSTCONF_URI fi } function configure_neutron_odl_lightweight_testing { echo "Configuring lightweight testing for OpenDaylight" populate_ml2_config /$Q_PLUGIN_CONF_FILE ml2_odl enable_lightweight_testing=True } # init_opendaylight() - Initialize databases, etc. function init_opendaylight { # clean up from previous (possibly aborted) runs # create required data files : } # install_opendaylight() - Collect source and prepare function install_opendaylight { echo "Installing OpenDaylight and dependent packages" if [[ "$ODL_USING_EXISTING_JAVA" != "True" ]] then if ! setup_java "${ODL_REQUIRED_JAVA_VERSION:-7}"; then exit 1 fi fi install_opendaylight_neutron_thin_ml2_driver # Download OpenDaylight cd $ODL_DIR if [[ "$OFFLINE" != "True" ]]; then wget -N $ODL_URL/$ODL_PKG fi unzip -u -o $ODL_PKG } # install_opendaylight_neutron_thin_ml2_driver() - Install the ML2 driver function install_opendaylight_neutron_thin_ml2_driver { echo "Installing the Networking-ODL driver for OpenDaylight" setup_develop $NETWORKING_ODL_DIR } # install_opendaylight_compute() - Make sure OVS is installed function install_opendaylight_compute { if [[ "$SKIP_OVS_INSTALL" = "True" ]]; then echo "Skipping OVS installation." else # packages are the same as for Neutron OVS agent _neutron_ovs_base_install_agent_packages fi } # start_opendaylight() - Start running processes, including screen function start_opendaylight { echo "Starting OpenDaylight" # Wipe out the data and journal directories ... grumble grumble grumble rm -rf $ODL_DIR/$ODL_NAME/{data,journal} # The following variables are needed by the running karaf process. # See the "bin/setenv" file in the OpenDaylight distribution for # their individual meaning. setup_java_env export JAVA_MIN_MEM=$ODL_JAVA_MIN_MEM export JAVA_MAX_MEM=$ODL_JAVA_MAX_MEM export JAVA_MAX_PERM_MEM=$ODL_JAVA_MAX_PERM_MEM run_process odl-server "$ODL_DIR/$ODL_NAME/bin/start" if [ -n "$ODL_BOOT_WAIT_URL" ]; then echo "Waiting for Opendaylight to start via $ODL_BOOT_WAIT_URL ..." # Probe ODL restconf for netvirt until it is operational local testcmd="curl -o /dev/null --fail --silent --head -u \ ${ODL_USERNAME}:${ODL_PASSWORD} http://${ODL_MGR_IP}:${ODL_PORT}/${ODL_BOOT_WAIT_URL}" test_with_retry "$testcmd" "Opendaylight did not start after $ODL_BOOT_WAIT" \ $ODL_BOOT_WAIT $ODL_RETRY_SLEEP_INTERVAL else echo "Waiting for Opendaylight to start ..." # Sleep a bit to let OpenDaylight finish starting up sleep $ODL_BOOT_WAIT fi } # stop_opendaylight() - Stop running processes (non-screen) function stop_opendaylight { # Stop the karaf container $ODL_DIR/$ODL_NAME/bin/stop stop_process odl-server } # cleanup_opendaylight_compute() - Remove all OVS ports, bridges and disconnects # controller from switch function cleanup_opendaylight_compute { # Remove the patch ports for port in $(sudo ovs-vsctl show | grep Port | awk '{print $2}' | cut -d '"' -f 2 | grep patch); do sudo ovs-vsctl del-port ${port} done # remove all OVS ports that look like Neutron created ports for port in $(sudo ovs-vsctl list port | grep -o -e tap[0-9a-f\-]* -e q[rg]-[0-9a-f\-]*); do sudo ovs-vsctl del-port ${port} done # Remove all the vxlan ports for port in $(sudo ovs-vsctl list port | grep name | grep vxlan | awk '{print $3}' | cut -d '"' -f 2); do sudo ovs-vsctl del-port ${port} done # Disconnect controller from switch unbind_opendaylight_controller # remove all OVS bridges created by ODL for bridge in $(sudo ovs-vsctl list-br | grep -o -e ${OVS_BR} -e ${PUBLIC_BRIDGE}); do sudo ovs-vsctl del-br ${bridge} done } # bind_opendaylight_controller() - set control manager to OVS function bind_opendaylight_controller { echo_summary "Initializing OpenDaylight" ODL_LOCAL_IP=${ODL_LOCAL_IP:-$HOST_IP} ODL_MGR_PORT=${ODL_MGR_PORT:-6640} ODL_OVS_MANAGERS=${ODL_OVS_MANAGERS:-$ODL_MGR_IP} read ovstbl <<< $(sudo ovs-vsctl get Open_vSwitch . _uuid) local ODL_MANAGERS_PARAM=() for manager in $(echo $ODL_OVS_MANAGERS | tr "," "\n"); do # ovsdbd doesn't understand localhost. replace it to numerical ip address ODL_MANAGERS_PARAM=( "${ODL_MANAGERS_PARAM[@]}" "tcp:${manager/localhost/127.0.0.1}:$ODL_MGR_PORT" ) done # don't overwrite the already existing managers local ODL_MANAGERS_OLD=$(sudo ovs-vsctl get-manager) local ODL_MANAGERS=$(echo $ODL_MANAGERS_OLD ${ODL_MANAGERS_PARAM[@]} | tr ' ' '\n' | sort | uniq | tr '\n' ' ') sudo ovs-vsctl set-manager ${ODL_MANAGERS} if [[ -n "$ODL_PROVIDER_MAPPINGS" ]]; then sudo ovs-vsctl set Open_vSwitch $ovstbl \ other_config:provider_mappings=$ODL_PROVIDER_MAPPINGS fi sudo ovs-vsctl set Open_vSwitch $ovstbl other_config:local_ip=$ODL_LOCAL_IP } # unbind_opendaylight_controller() - disconnect controller from switch and clear bridges function unbind_opendaylight_controller { sudo ovs-vsctl del-manager BRIDGES=$(sudo ovs-vsctl list-br) for bridge in $BRIDGES ; do sudo ovs-vsctl del-controller $bridge done } # configure_opendaylight_l3() - configure bridges for OpenDaylight L3 forwarding function configure_opendaylight_l3 { wait_for_active_bridge $PUBLIC_BRIDGE $ODL_RETRY_SLEEP_INTERVAL $ODL_BOOT_WAIT # Note: as of Lithium-SR3 and Beryllium releases, ODL will add the OVS port(s) # to the external bridge via the ODL_PROVIDER_MAPPINGS method. Being so, # the usage of PUBLIC_INTERFACE is no longer necessary in ODL devstack. # DEPRECATED: Add public interface to public bridge, if needed if [[ -n "$PUBLIC_INTERFACE" && "$PUBLIC_INTERFACE" != "br100" ]]; then deprecated "Adding $PUBLIC_INTERFACE to $PUBLIC_BRIDGE." deprecated "Use ODL_PROVIDER_MAPPINGS instead of PUBLIC_INTERFACE." sudo ovs-vsctl --no-wait -- --may-exist add-port $PUBLIC_BRIDGE $PUBLIC_INTERFACE sudo ip link set $PUBLIC_INTERFACE up fi move_interface_addresses "into_bridge" }