.. This work is licensed under a Creative Commons Attribution 4.0 International License. .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, Huawei Technologies Co.,Ltd and others. ========================================== Conducting CVP Testing with Dovetail ========================================== Overview ------------------------------ The Dovetail testing framework for CVP consists of two major parts: the testing client that executes all test cases in a lab (vendor self-testing or a third party lab), and the server system that is hosted by the CVP administrator to store and view test results based on a web API. The following diagram illustrates this overall framework. .. image:: ../../../images/dovetail_online_mode.png :align: center :scale: 50% Within the tester's lab, the Test Host is the machine where Dovetail executes all automated test cases. As it hosts the test harness, the Test Host must not be part of the System Under Test (SUT) itself. The above diagram assumes that the tester's Test Host is situated in a DMZ which has internal network access to the SUT and external access to the OPNFV server via the public Internet. This arrangement may not be supported in some labs. Dovetail also supports an offline mode of testing that is illustrated in the next diagram. .. image:: ../../../images/dovetail_offline_mode.png :align: center :scale: 50% In the offline mode, the Test Host only needs to have access to the SUT via the internal network, but does not need to connect to the public Internet. This user guide will highlight differences between the online and offline modes of the Test Host. While it is possible to run the Test Host as a virtual machine, this user guide assumes it is a physical machine for simplicity. The rest of this guide will describe how to install the Dovetail tool as a Docker container image, go over the steps of running the CVP test suite, and then discuss how to view test results and make sense of them. Readers interested in using Dovetail for its functionalities beyond CVP testing, e.g. for in-house or extended testing, should consult the Dovetail developer's guide for additional information. Installing Dovetail -------------------- In this section, we describe the procedure to install Dovetail client tool on the Test Host. The Test Host must have network access to the management network with access rights to the Virtual Infrastructure Manager's API. Checking the Test Host Readiness ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The Test Host must have network access to the Virtual Infrastructure Manager's API hosted in the SUT so that the Dovetail tool can exercise the API from the Test Host. It must also have ``ssh`` access to the Linux operating system of the compute nodes in the SUT. The ``ssh`` mechanism is used by some test cases to generate test events in the compute nodes. You can find out which test cases use this mechanism in the test specification document. We have tested the Dovetail tool on the following host operating systems. Other versions or distribution of Linux may also work, but community support may be more available on these versions. - Ubuntu 16.04.2 LTS (Xenial) or 14.04 LTS (Trusty) - CentOS-7-1611 - Red Hat Enterprise Linux 7.3 - Fedora 24 or 25 Server Non-Linux operating systems, such as Windows, Mac OS, have not been tested and are not supported. If online mode is used, the tester should also validate that the Test Host can reach the public Internet. For example, .. code-block:: bash $ ping www.opnfv.org PING www.opnfv.org (50.56.49.117): 56 data bytes 64 bytes from 50.56.49.117: icmp_seq=0 ttl=48 time=52.952 ms 64 bytes from 50.56.49.117: icmp_seq=1 ttl=48 time=53.805 ms 64 bytes from 50.56.49.117: icmp_seq=2 ttl=48 time=53.349 ms ... Or, if the lab environment does not allow ping, try validating it using HTTPS instead. .. code-block:: bash $ curl https://www.opnfv.org ... Configuring the Test Host Environment ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The Test Host needs a few environment variables set correctly in order to access the Openstack API required to drive the Dovetail tests. For convenience and as a convention, we will also create a home directory for storing all Dovetail related config files and results files: .. code-block:: bash $ mkdir -p /home/dovetail $ export DOVETAIL_HOME=/home/dovetail Here we set dovetail home directory to be ``/home/dovetail`` for an example. Then create a directory named ``pre_config`` in this directory to store all Dovetail related config files: .. code-block:: bash $ mkdir -p ${DOVETAIL_HOME}/pre_config At this point, you will need to consult your SUT (Openstack) administrator to correctly set the configurations in a file named ``env_config.sh``. The Openstack settings need to be configured such that the Dovetail client has all the necessary credentials and privileges to execute all test operations. If the SUT uses terms somewhat differently from the standard Openstack naming, you will need to adjust this file accordingly. Create and edit the file ``${DOVETAIL_HOME}/pre_config/env_config.sh`` so that all parameters are set correctly to match your SUT. Here is an example of what this file should contain. .. code-block:: bash $ cat ${DOVETAIL_HOME}/pre_config/env_config.sh # Project-level authentication scope (name or ID), recommend admin project. export OS_PROJECT_NAME=admin # For identity v2, it uses OS_TENANT_NAME rather than OS_PROJECT_NAME. export OS_TENANT_NAME=admin # Authentication username, belongs to the project above, recommend admin user. export OS_USERNAME=admin # Authentication password. Use your own password export OS_PASSWORD=xxxxxxxx # Authentication URL, one of the endpoints of keystone service. If this is v3 version, # there need some extra variables as follows. export OS_AUTH_URL='http://xxx.xxx.xxx.xxx:5000/v3' # Default is 2.0. If use keystone v3 API, this should be set as 3. export OS_IDENTITY_API_VERSION=3 # Domain name or ID containing the user above. # Command to check the domain: openstack user show export OS_USER_DOMAIN_NAME=default # Domain name or ID containing the project above. # Command to check the domain: openstack project show export OS_PROJECT_DOMAIN_NAME=default # Home directory for dovetail that you have created before. export DOVETAIL_HOME=/home/dovetail # Special environment parameters for https. # If using https + cacert, the path of cacert file should be provided. # The cacert file should be put at $DOVETAIL_HOME/pre_config. export OS_CACERT=$DOVETAIL_HOME/pre_config/cacert.pem # If using https + no cacert, should add OS_INSECURE environment parameter. export OS_INSECURE=True Export all these variables into environment by, .. code-block:: bash $ source ${DOVETAIL_HOME}/pre_config/env_config.sh If OpenStack client is installed, you can validate that the OpenStack environmental settings are correct by, .. code-block:: bash $ openstack service list If the SUT uses https but have no cacert, you can validate the OpenStack environmental settings by, .. code-block:: bash $ openstack --insecure service list If your SUT uses hosts file to translate hostnames into the IP of OS_AUTH_URL, then you need to provide these hosts info in file ``$DOVETAIL_HOME/pre_config/hosts.yaml``. Create and edit file ``$DOVETAIL_HOME/pre_config/hosts.yaml``. Here is an example of what this file should contain. .. code-block:: bash $ cat ${DOVETAIL_HOME}/pre_config/hosts.yaml --- hosts_info: - image.xx.xx.xx.com:172.xxx.xxx.xxx - compute.xx.xx.xx.com:172.xxx.xxx.xxx - : Installing Prerequisite on the Test Host ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The main prerequisite software for Dovetail are Python and Docker. In the CVP test suite for the Danube release, Dovetail requires Python 2.7. Python 3.x is not supported at this time. Use the following steps to check if the right version of python is already installed, and if not, install it. .. code-block:: bash $ python --version Python 2.7.6 If your Test Host does not have Python installed, or the version is not 2.7, you should consult Python installation guides corresponding to the operating system in your Test Host on how to install Python 2.7. Dovetail does not work with Docker versions prior to 1.12.3. We have validated Dovetail with Docker 17.03 CE. Other versions of Docker later than 1.12.3 may also work, but community support may be more available on Docker 17.03 CE. .. code-block:: bash $ sudo docker version Client: Version: 17.03.1-ce API version: 1.27 Go version: go1.7.5 Git commit: c6d412e Built: Mon Mar 27 17:10:36 2017 OS/Arch: linux/amd64 Server: Version: 17.03.1-ce API version: 1.27 (minimum version 1.12) Go version: go1.7.5 Git commit: c6d412e Built: Mon Mar 27 17:10:36 2017 OS/Arch: linux/amd64 Experimental: false If your Test Host does not have Docker installed, or Docker is older than 1.12.3, or you have Docker version other than 17.03 CE and wish to change, you will need to install, upgrade, or re-install in order to run Dovetail. The Docker installation process can be more complex, you should refer to the official Docker installation guide that is relevant to your Test Host's operating system. The above installation steps assume that the Test Host is in the online mode. For offline testing, use the following offline installation steps instead. In order to install or upgrade Python offline, you may download packaged Python 2.7 for your Test Host's operating system on a connected host, copy the packge to the Test Host, then install from that local copy. In order to install Docker offline, download Docker static binaries and copy the tar file to the Test Host, such as for Ubuntu14.04, you may follow the following link to install, .. code-block:: bash https://github.com/meetyg/docker-offline-install Installing Dovetail on the Test Host ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The Dovetail project maintains a Docker image that has Dovetail test tools preinstalled. This Docker image is tagged with versions. Before pulling the Dovetail image, check the OPNFV's CVP web page first to determine the right tag for CVP testing. If the Test Host is online, you can directly pull Dovetail Docker image and download ubuntu and cirros images. .. code-block:: bash $ sudo wget -nc http://artifacts.opnfv.org/sdnvpn/ubuntu-16.04-server-cloudimg-amd64-disk1.img -P ${DOVETAIL_HOME}/pre_config $ sudo wget -nc http://download.cirros-cloud.net/0.3.5/cirros-0.3.5-x86_64-disk.img -P ${DOVETAIL_HOME}/pre_config $ sudo docker pull opnfv/dovetail:cvp.0.6.0 cvp.0.6.0: Pulling from opnfv/dovetail 30d541b48fc0: Pull complete 8ecd7f80d390: Pull complete 46ec9927bb81: Pull complete 2e67a4d67b44: Pull complete 7d9dd9155488: Pull complete cc79be29f08e: Pull complete e102eed9bf6a: Pull complete 952b8a9d2150: Pull complete bfbb639d1f38: Pull complete bf7c644692de: Pull complete cdc345e3f363: Pull complete Digest: sha256:d571b1073b2fdada79562e8cc67f63018e8d89268ff7faabee3380202c05edee Status: Downloaded newer image for opnfv/dovetail:cvp.0.6.0 An example of the is *cvp.0.6.0*. If the Test Host is offline, you will need to first pull the Dovetail Docker image, and all the dependent images that Dovetail uses, to a host that is online. The reason that you need to pull all dependent images is because Dovetail normally does dependency checking at run-time and automatically pull images as needed, if the Test Host is online. If the Test Host is offline, then all these dependencies will also need to be manually copied. .. code-block:: bash $ sudo docker pull opnfv/dovetail:cvp.0.6.0 $ sudo docker pull opnfv/functest:cvp.0.5.0 $ sudo docker pull opnfv/yardstick:danube.3.2 $ sudo docker pull opnfv/bottlenecks:cvp.0.4.0 $ sudo wget -nc http://artifacts.opnfv.org/sdnvpn/ubuntu-16.04-server-cloudimg-amd64-disk1.img -P {ANY_DIR} $ sudo wget -nc http://download.cirros-cloud.net/0.3.5/cirros-0.3.5-x86_64-disk.img -P {ANY_DIR} Once all these images are pulled, save the images, copy to the Test Host, and then load the Dovetail and all dependent images at the Test Host. At the online host, save images. .. code-block:: bash $ sudo docker save -o dovetail.tar opnfv/dovetail:cvp.0.6.0 opnfv/functest:cvp.0.5.0 \ opnfv/yardstick:danube.3.2 opnfv/bottlenecks:cvp.0.4.0 Copy dovetail.tar file to the Test Host, and then load the images on the Test Host. .. code-block:: bash $ sudo docker load --input dovetail.tar Copy sdnvpn test area image ubuntu-16.04-server-cloudimg-amd64-disk1.img to ``${DOVETAIL_HOME}/pre_config/``. Copy cirros image cirros-0.3.5-x86_64-disk.img to ``${DOVETAIL_HOME}/pre_config/``. Now check to see that all Docker images have been pulled or loaded properly. .. code-block:: bash $ sudo docker images REPOSITORY TAG IMAGE ID CREATED SIZE opnfv/functest cvp.0.5.0 9eaeaea5f203 8 days ago 1.53GB opnfv/dovetail cvp.0.6.0 5d25b289451c 8 days ago 516MB opnfv/yardstick danube.3.2 574596b6ea12 8 days ago 1.2GB opnfv/bottlenecks cvp.0.4.0 00450688bcae 3 hours ago 622 MB Regardless of whether you pulled down the Dovetail image directly online, or loaded from a static image tar file, you are ready to run Dovetail. .. code-block:: bash $ sudo docker run --privileged=true -it \ -e DOVETAIL_HOME=$DOVETAIL_HOME \ -v $DOVETAIL_HOME:$DOVETAIL_HOME \ -v /var/run/docker.sock:/var/run/docker.sock \ opnfv/dovetail: /bin/bash The ``-e`` options set the env variables in the container and the ``-v`` options map files in the host to files in the container. Running the CVP Test Suite ---------------------------- Now you should be in the Dovetail container's prompt and ready to execute test suites. The Dovetail client CLI allows the tester to specify which test suite to run. By default the results are stored in a local file ``$DOVETAIL_HOME/results``. .. code-block:: bash $ dovetail run --testsuite If you want to see more DEBUG logs, ``--debug`` should be added. .. code-block:: bash $ dovetail run --testsuite --debug If the Test Host is offline, ``--offline`` should be added to support running with local resources. .. code-block:: bash $ dovetail run --testsuite --offline Multiple test suites may be available. For the purpose of running CVP test suite, the test suite name follows the following format, ``CVP___`` For example, CVP_1_0_0. .. code-block:: bash $ dovetail run --testsuite CVP_1_0_0 If you are not running the entire test suite, you can choose to run an individual test area instead. .. code-block:: bash $ dovetail run --testsuite CVP_1_0_0 --testarea ipv6 Until the official test suite is approved and released, you can use the *proposed_tests* for your trial runs, like this. .. code-block:: bash $ dovetail run --testsuite proposed_tests --testarea ipv6 2017-05-23 05:01:49,488 - run - INFO - ================================================ 2017-05-23 05:01:49,488 - run - INFO - Dovetail compliance: proposed_tests! 2017-05-23 05:01:49,488 - run - INFO - ================================================ 2017-05-23 05:01:49,488 - run - INFO - Build tag: daily-master-4bdde6b8-afa6-40bb-8fc9-5d568d74c8d7 2017-05-23 05:01:49,536 - run - INFO - 2017-05-23 05:01:49,710 - run - INFO - >>[testcase]: dovetail.ipv6.tc001 2017-05-23 05:08:22,532 - run - INFO - Results have been stored with file /home/dovetail/results/functest_results.txt. 2017-05-23 05:08:22,538 - run - INFO - >>[testcase]: dovetail.ipv6.tc002 ... Special Configuration for Running HA Test Cases ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ HA test cases need to know the info of a controller node of the OpenStack. It should include the node's name, role, ip, as well as the user and key_filename or password to login the node. Users should create file ``${DOVETAIL_HOME}/pre_config/pod.yaml`` to store the info. There is a sample file for users. .. code-block:: bash nodes: - # This can not be changed and must be node1. name: node1 # This must be controller. role: Controller # This is the install IP of a controller node. ip: xx.xx.xx.xx # User name of this node. This user must have sudo privileges. user: root # Password of the user. password: root Besides the 'password', user could also provide 'key_filename' to login the node. Users need to create file ``$DOVETAIL_HOME/pre_config/id_rsa`` to store the private key. .. code-block:: bash nodes: - name: node1 role: Controller ip: 10.1.0.50 user: root # Private key of this node. It must be /root/.ssh/id_rsa # Dovetail will move the key file from $DOVETAIL_HOME/pre_config/id_rsa # to /root/.ssh/id_rsa of Yardstick container key_filename: /root/.ssh/id_rsa Configuration for Running Tempest Test Cases ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ The test cases in the test areas `interop` (OpenStack Interoperability tests), `ipv6` and `tempest` are based on Tempest. A SUT-specific configuration of Tempest is required in order to run those test cases successfully. The corresponding SUT-specific configuration options should be supplied in the file ``$DOVETAIL_HOME/pre_config/tempest_conf.yaml``. Create and edit file ``$DOVETAIL_HOME/pre_config/tempest_conf.yaml``. Here is an example of what this file should contain. .. code-block:: bash compute: # The minimum number of compute nodes expected. # This should be no less than 2 and no larger than the compute nodes the SUT actually has. min_compute_nodes: 2 # Expected device name when a volume is attached to an instance. volume_device_name: vdb # Lower version of the test target microversion range. min_microversion: 2.2 # Upper version of the test target microversion range. max_microversion: latest Making Sense of CVP Test Results ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ When a tester is performing trial runs, Dovetail stores results in a local file by default. .. code-block:: bash cd $DOVETAIL_HOME/results #. Local file * Log file: dovetail.log * Review the dovetail.log to see if all important information has been captured - in default mode without DEBUG. * The end of the log file has a summary of all test case test results. * Additional log files may be of interests: refstack.log, dovetail_ha_tcXXX.out ... * Example: OpenStack Interoperability test cases * Can see the log details in ``osinterop_logs/dovetail.osinterop.tc001.log``, which has the passed, skipped and failed test cases results. * The skipped test cases have the reason for the users to see why these test cases skipped. * The failed test cases have rich debug information for the users to see why these test cases fail. * Example: vping test case example * Its log is stored in dovetail.log. * Its result is stored in functest_results.txt. * Example: ha test case example * Its log is stored in dovetail.log. * Its result is stored in dovetail_ha_tcXXX.out. * Example: ipv6, sdnvpn and tempest test cases examples * Can see the log details in ``ipv6_logs/dovetail.ipv6.tcXXX.log``, ``sdnvpn_logs/dovetail.sdnvpn.tcXXX.log`` and ``tempest_logs/dovetail.tempest.tcXXX.log``, respectively. They all have the passed, skipped and failed test cases results. #. OPNFV web interface CVP will host a web site to collect test results. Users can upload their results to this web site, so they can review these results in the future. * web site url * Wait for the complement of LF, test community, etc. * Sign in / Sign up * You need to sign in you account, then you can upload results, and check your private results. CVP is now using openstack id as account provider, but will soon support Linux Foundation ID as well. * If you already have a openstack id, you can sign in directly with your id. * If you do not have a openstack id, you can sign up a new one on the sign up page. * If you do not sign in, you can only check the community results. * My results * This page lists all results uploaded by you after you signed in, * You can also upload your results on this page. * There is a *choose file* button, once you click it, you can choose your reuslt file in your harddisk then click the *upload* button, and you will see a results id once your uploading succeed. * Check the *review* box to submit your result to the OPNFV. Uncheck the box to withdraw your result. * profile * This page shows your account info after you signed in. Updating Dovetail or a Test Suite ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ Follow the instructions in section `Installing Dovetail on the Test Host`_ and `Running the CVP Test Suite`_ by replacing the docker images with new_tags, .. code-block:: bash sudo docker pull opnfv/dovetail: sudo docker pull opnfv/functest: sudo docker pull opnfv/yardstick: This step is necessary if dovetail software or the CVP test suite have updates.