From 65b0c33c8a90f8b43e777a8a3f4a8a31e19f1d6b Mon Sep 17 00:00:00 2001 From: Bin Hu Date: Wed, 10 May 2017 23:07:00 -0700 Subject: IPv6 Test Cases Change-Id: Icdb2786076aa6a263449eca5db4a07d14f1e2adf Signed-off-by: Bin Hu --- docs/testing/user/testspecification/ipv6/index.rst | 1776 ++++++++++++++++++++ 1 file changed, 1776 insertions(+) create mode 100644 docs/testing/user/testspecification/ipv6/index.rst (limited to 'docs/testing/user/testspecification/ipv6') diff --git a/docs/testing/user/testspecification/ipv6/index.rst b/docs/testing/user/testspecification/ipv6/index.rst new file mode 100644 index 00000000..674c69d8 --- /dev/null +++ b/docs/testing/user/testspecification/ipv6/index.rst @@ -0,0 +1,1776 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV + +======================== +IPv6 test specification +======================== + +.. toctree:: + :maxdepth: 2 + +Scope +===== + +The IPv6 test area will evaluate the ability for a SUT to support IPv6 +Tenant Network features and functionality. The tests in this test area will +evaluate, + +- network, subnet, port, router API CRUD operations +- interface add and remove operations +- security group and security group rule API CRUD operations +- IPv6 address assignment with dual stack, dual net, multiprefix in mode DHCPv6 stateless or SLAAC + +References +================ + +- upstream openstack API reference + + - http://developer.openstack.org/api-ref + +- upstream openstack IPv6 reference + + - https://docs.openstack.org/newton/networking-guide/config-ipv6.html + +Definitions and abbreviations +============================= + +The following terms and abbreviations are used in conjunction with this test area + +- API - Application Programming Interface +- CIDR - Classless Inter-Domain Routing +- CRUD - Create, Read, Update, and Delete +- DHCP - Dynamic Host Configuration Protocol +- DHCPv6 - Dynamic Host Configuration Protocol version 6 +- ICMP - Internet Control Message Protocol +- NFVI - Network Functions Virtualization Infrastructure +- NIC - Network Interface Controller +- RA - Router Advertisements +- radvd - The Router Advertisement Daemon +- SDN - Software Defined Network +- SLAAC - Stateless Address Auto Configuration +- TCP - Transmission Control Protocol +- UDP - User Datagram Protocol +- VM - Virtual Machine +- vNIC - virtual Network Interface Card + +System Under Test (SUT) +======================= + +The system under test is assumed to be the NFVI and VIM deployed with a Pharos compliant infrastructure. + +Test Area Structure +==================== + +The test area is structured based on network, port and subnet operations. Each test case +is able to run independently, i.e. irrelevant of the state created by a previous test. + +Test Descriptions +================= + +API Used and Reference +---------------------- + +Networks: https://developer.openstack.org/api-ref/networking/v2/index.html#networks + +- show network details +- update network +- delete network +- list networks +- create netowrk +- bulk create networks + +Subnets: https://developer.openstack.org/api-ref/networking/v2/index.html#subnets + +- list subnets +- create subnet +- bulk create subnet +- show subnet details +- update subnet +- delete subnet + +Routers and interface: https://developer.openstack.org/api-ref/networking/v2/index.html#routers-routers + +- list routers +- create router +- show router details +- update router +- delete router +- add interface to router +- remove interface from router + +Ports: https://developer.openstack.org/api-ref/networking/v2/index.html#ports + +- show port details +- update port +- delete port +- list port +- create port +- bulk create ports + +Security groups: https://developer.openstack.org/api-ref/networking/v2/index.html#security-groups-security-groups + +- list security groups +- create security groups +- show security group +- update security group +- delete security group + +Security groups rules: https://developer.openstack.org/api-ref/networking/v2/index.html#security-group-rules-security-group-rules + +- list security group rules +- create security group rule +- show security group rule +- delete security group rule + +Servers: https://developer.openstack.org/api-ref/compute/ + +- list servers +- create server +- create multiple servers +- list servers detailed +- show server details +- update server +- delete server + +------------------------------------------------------------------ +Test Case 1 - Create and Delete Bulk Network, IPv6 Subnet and Port +------------------------------------------------------------------ + +Short name +---------- + +opnfv.ipv6.bulk_network_subnet_port_create_delete + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of creating and deleting multiple networks, +IPv6 subnets, ports in one request, the reference is, + +tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network +tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet +tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create 2 networks using bulk create, storing the "id" parameters returned in the response +* Test action 2: List all networks, verifying the two network id's are found in the list +* **Test assertion 1:** The two "id" parameters are found in the network list +* Test action 3: Delete the 2 created networks using the stored network ids +* Test action 4: List all networks, verifying the network ids are no longer present +* **Test assertion 2:** The two "id" parameters are not present in the network list +* Test action 5: Create 2 networks using bulk create, storing the "id" parameters returned in the response +* Test action 6: Create an IPv6 subnets on each of the two networks using bulk create commands, + storing the associated "id" parameters +* Test action 7: List all subnets, verify the IPv6 subnets are found in the list +* **Test assertion 3:** The two IPv6 subnet "id" parameters are found in the network list +* Test action 8: Delete the 2 IPv6 subnets using the stored "id" parameters +* Test action 9: List all subnets, verify the IPv6 subnets are no longer present in the list +* **Test assertion 4:** The two IPv6 subnet "id" parameters, are not present in list +* Test action 10: Delete the 2 networks created in test action 5, using the stored network ids +* Test action 11: List all networks, verifying the network ids are no longer present +* **Test assertion 5:** The two "id" parameters are not present in the network list +* Test action 12: Create 2 networks using bulk create, storing the "id" parameters returned in the response +* Test action 13: Create a port on each of the two networks using bulk create commands, + storing the associated "port_id" parameters +* Test action 14: List all ports, verify the port_ids are found in the list +* **Test assertion 6:** The two "port_id" parameters are found in the ports list +* Test action 15: Delete the 2 ports using the stored "port_id" parameters +* Test action 16: List all ports, verify port_ids are no longer present in the list +* **Test assertion 7:** The two "port_id" parameters, are not present in list +* Test action 17: Delete the 2 networks created in test action 12, using the stored network ids +* Test action 18: List all networks, verifying the network ids are no longer present +* **Test assertion 8:** The two "id" parameters are not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to use bulk create commands to create networks, IPv6 subnets and ports on +the SUT API. Specifically it verifies that: + +* Bulk network create commands return valid "id" parameters which are reported in the list commands +* Bulk IPv6 subnet commands return valid "id" parameters which are reported in the list commands +* Bulk port commands return valid "port_id" parameters which are reported in the list commands +* All items created using bulk create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +N/A + +------------------------------------------------------------------- +Test Case 2 - Create, Update and Delete an IPv6 Network and Subnet +------------------------------------------------------------------- + +Short name +----------- + +opnfv.ipv6.network_subnet_create_update_delete + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of creating, updating, deleting +network and IPv6 subnet with the network, the reference is + +tempest.api.network.test_networks.NetworksIpV6Test.test_create_update_delete_network_subnet + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" and "status" parameters returned + in the response +* Test action 2: Verify the value of the created network's "status" is ACTIVE +* **Test assertion 1:** The created network's "status" is ACTIVE +* Test action 3: Update this network with a new_name +* Test action 4: Verify the network's name equals the new_name +* **Test assertion 2:** The network's name equals to the new_name after name updating +* Test action 5: Create an IPv6 subnet within the network, storing the "id" parameters + returned in the response +* Test action 6: Update this IPv6 subnet with a new_name +* Test action 7: Verify the IPv6 subnet's name equals the new_name +* **Test assertion 3:** The IPv6 subnet's name equals to the new_name after name updating +* Test action 8: Delete the IPv6 subnet created in test action 5, using the stored subnet id +* Test action 9: List all subnets, verifying the subnet id is no longer present +* **Test assertion 4:** The IPv6 subnet "id" is not present in the subnet list +* Test action 10: Delete the network created in test action 1, using the stored network id +* Test action 11: List all networks, verifying the network id is no longer present +* **Test assertion 5:** The network "id" is not present in the network list + + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to create, update, delete network, IPv6 subnet on the +SUT API. Specifically it verifies that: + +* Create network commands return ACTIVE "status" parameters which are reported in the list commands +* Update network commands return updated "name" parameters which equals to the "name" used +* Update subnet commands return updated "name" parameters which equals to the "name" used +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +------------------------------------------------- +Test Case 3 - Check External Network Visibility +------------------------------------------------- + +Short name +----------- + +opnfv.ipv6.external_network_visibility + +Use case specification +---------------------- + +This test case verifies user can see external networks but not subnets, the reference is, + +tempest.api.network.test_networks.NetworksIpV6Test.test_external_network_visibility + +Test preconditions +------------------ + +1. The SUT has at least one external network. +2. In the external network list, there is no network without external router, i.e., +all networks in this list are with external router. +3. There is one external network with configured public network id and there is +no subnet on this network + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: List all networks with external router, storing the "id"s parameters returned in the response +* Test action 2: Verify list in test action 1 is not empty +* **Test assertion 1:** The network with external router list is not empty +* Test action 3: List all netowrks without external router in test action 1 list +* Test action 4: Verify list in test action 3 is empty +* **Test assertion 2:** networks without external router in the external network + list is empty +* Test action 5: Verify the configured public network id is found in test action 1 stored "id"s +* **Test assertion 3:** the public network id is found in the external network "id"s +* Test action 6: List the subnets of the external network with the configured + public network id +* Test action 7: Verify list in test action 6 is empty +* **Test assertion 4:** There is no subnet of the external network with the configured + public network id + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to use list commands to list external networks, pre-configured +public network. Specifically it verifies that: + +* Network list commands to find visible networks with external router +* Network list commands to find visible network with pre-configured public network id +* Subnet list commands to find no subnet on the pre-configured public network + +Post conditions +--------------- + +None + +--------------------------------------------- +Test Case 4 - List IPv6 Networks and Subnets +--------------------------------------------- + +Short name +----------- + +opnfv.ipv6.network_subnet_list + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of listing netowrks, +subnets after creating a network and an IPv6 subnet, the reference is + +tempest.api.network.test_networks.NetworksIpV6Test.test_list_networks +tempest.api.network.test_networks.NetworksIpV6Test.test_list_subnets + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" parameter returned in the response +* Test action 2: List all networks, verifying the network id is found in the list +* **Test assertion 1:** The "id" parameter is found in the network list +* Test action 3: Create an IPv6 subnet of the network created in test action 1. + storing the "id" parameter returned in the response +* Test action 4: List all subnets of this network, verifying the IPv6 subnet id + is found in the list +* **Test assertion 2:** The "id" parameter is found in the IPv6 subnet list +* Test action 5: Delete the IPv6 subnet using the stored "id" parameters +* Test action 6: List all subnets, verify subnet_id is no longer present in the list +* **Test assertion 3:** The IPv6 subnet "id" parameter is not present in list +* Test action 7: Delete the network created in test action 1, using the stored network ids +* Test action 8: List all networks, verifying the network id is no longer present +* **Test assertion 4:** The network "id" parameter is not present in the network list + +Pass / fail criteria +'''''''''''''''''''' + +This test evaluates the ability to use create commands to create network, IPv6 subnet, list +commands to list the created networks, IPv6 subnet on the SUT API. Specifically it verifies that: + +* Create commands to create network, IPv6 subnet +* List commands to find that netowrk, IPv6 subnet in the all networks, subnets list after creating +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +------------------------------------------------------------- +Test Case 5 - Show Details of an IPv6 Network and Subnet +------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.network_subnet_show + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of showing the network, subnet +details, the reference is, + +tempest.api.network.test_networks.NetworksIpV6Test.test_show_network +tempest.api.network.test_networks.NetworksIpV6Test.test_show_subnet + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" and "name" parameter returned in the response +* Test action 2: Show the network id and name, verifying the network id and name equal to the + "id" and "name" stored in test action 1 +* **Test assertion 1:** The id and name equal to the "id" and "name" stored in test action 1 +* Test action 3: Create an IPv6 subnet of the network, storing the "id" and CIDR parameter + returned in the response +* Test action 4: Show the details of the created IPv6 subnet, verifying the + id and CIDR in the details are equal to the stored id and CIDR in test action 3. +* **Test assertion 2:** The "id" and CIDR in show details equal to "id" and CIDR stored in test action 3 +* Test action 5: Delete the IPv6 subnet using the stored "id" parameter +* Test action 6: List all subnets on the network, verify the IPv6 subnet id is no longer present in the list +* **Test assertion 3:** The IPv6 subnet "id" parameter is not present in list +* Test action 7: Delete the network created in test action 1, using the stored network id +* Test action 8: List all networks, verifying the network id is no longer present +* **Test assertion 4:** The "id" parameter is not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to use create commands to create network, IPv6 subnet and show +commands to show network, IPv6 subnet details on the SUT API. Specifically it verifies that: + +* Network show commands return correct "id" and "name" parameter which equal to the returned response in the create commands +* IPv6 subnet show commands return correct "id" and CIDR parameter which equal to the returned response in the create commands +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +------------------------------------------------------------- +Test Case 6 - Create an IPv6 Port in Allowed Allocation Pools +------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.port_create_in_allocation_pool + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of creating +an IPv6 subnet within allowed IPv6 address allocation pool and creating +a port whose address is in the range of the pool, the reference is, + +tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_in_allowed_allocation_pools + +Test preconditions +------------------ + +There should be an IPv6 CIDR configuration, which prefixlen is less than 126. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" parameter returned in the response +* Test action 2: Check the allocation pools configuration, verifying the prefixlen + of the IPv6 CIDR configuration is less than 126. +* **Test assertion 1:** The prefixlen of the IPv6 CIDR configuration is less than 126 +* Test action 3: Get the allocation pool by setting the start_ip and end_ip + based on the IPv6 CIDR configuration. +* Test action 4: Create an IPv6 subnet of the network within the allocation pools, + storing the "id" parameter returned in the response +* Test action 5: Create a port of the network, storing the "id" parameter returned in the response +* Test action 6: Verify the port's id is in the range of the allocation pools which is got is test action 3 +* **Test assertion 2:** the port's id is in the range of the allocation pools +* Test action 7: Delete the port using the stored "id" parameter +* Test action 8: List all ports, verify the port id is no longer present in the list +* **Test assertion 3:** The port "id" parameter is not present in list +* Test action 9: Delete the IPv6 subnet using the stored "id" parameter +* Test action 10: List all subnets on the network, verify the IPv6 subnet id is no longer present in the list +* **Test assertion 4:** The IPv6 subnet "id" parameter is not present in list +* Test action 11: Delete the network created in test action 1, using the stored network id +* Test action 12: List all networks, verifying the network id is no longer present +* **Test assertion 5:** The "id" parameter is not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to use create commands to create an IPv6 subnet within allowed +IPv6 address allocation pool and create a port whose address is in the range of the pool. Specifically it verifies that: + +* IPv6 subnet create command to create an IPv6 subnet within allowed IPv6 address allocation pool +* Port create command to create a port whose id is in the range of the allocation pools +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +------------------------------------------------------------- +Test Case 7 - Create an IPv6 Port with Empty Security Groups +------------------------------------------------------------- + +Short name +----------- + +opnfv.ipv6.port_create_empty_security_group + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of creating port with empty +security group, the reference is, + +tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_port_with_no_securitygroups + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" parameter returned in the response +* Test action 2: Create an IPv6 subnet of the network, storing the "id" parameter returned in the response +* Test action 3: Create a port of the network with an empty security group, storing the "id" parameter returned in the response +* Test action 4: Verify the security group of the port is not none but is empty +* **Test assertion 1:** the security group of the port is not none but is empty +* Test action 5: Delete the port using the stored "id" parameter +* Test action 6: List all ports, verify the port id is no longer present in the list +* **Test assertion 2:** The port "id" parameter is not present in list +* Test action 7: Delete the IPv6 subnet using the stored "id" parameter +* Test action 8: List all subnets on the network, verify the IPv6 subnet id is no longer present in the list +* **Test assertion 3:** The IPv6 subnet "id" parameter is not present in list +* Test action 9: Delete the network created in test action 1, using the stored network id +* Test action 10: List all networks, verifying the network id is no longer present +* **Test assertion 4:** The "id" parameter is not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to use create commands to create port with +empty security group of the SUT API. Specifically it verifies that: + +* Port create commands to create a port with an empty security group +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +----------------------------------------------------- +Test Case 8 - Create, Update and Delete an IPv6 Port +----------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.port_create_update_delete + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of creating, updating, +deleting IPv6 port, the reference is, + +tempest.api.network.test_ports.PortsIpV6TestJSON.test_create_update_delete_port + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" parameter returned in the response +* Test action 2: Create a port of the network, storing the "id" and "admin_state_up" parameters + returned in the response +* Test action 3: Verify the value of port's 'admin_state_up' is True +* **Test assertion 1:** the value of port's 'admin_state_up' is True after creating +* Test action 4: Update the port's name with a new_name and set port's admin_state_up to False, + storing the name and admin_state_up parameters returned in the response +* Test action 5: Verify the stored port's name equals to new_name and the port's admin_state_up is False. +* **Test assertion 2:** the stored port's name equals to new_name and the port's admin_state_up is False +* Test action 6: Delete the port using the stored "id" parameter +* Test action 7: List all ports, verify the port is no longer present in the list +* **Test assertion 3:** The port "id" parameter is not present in list +* Test action 8: Delete the network created in test action 1, using the stored network id +* Test action 9: List all networks, verifying the network id is no longer present +* **Test assertion 4:** The "id" parameter is not present in the network list + +Pass / fail criteria +'''''''''''''''''''' + +This test evaluates the ability to use create/update/delete commands to create/update/delete port +of the SUT API. Specifically it verifies that: + +* Port create commands return True of 'admin_state_up' in response +* Port update commands to update 'name' to new_name and 'admin_state_up' to false +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +------------------------------ +Test Case 9 - List IPv6 Ports +------------------------------ + +Short name +---------- + +opnfv.ipv6.tc009.port_list + +Use case specification +---------------------- + +This test case evaluates the SUT ability of creating a port on a network and +finding the port in the all ports list, the reference is, + +tempest.api.network.test_ports.PortsIpV6TestJSON.test_list_ports + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" parameter returned in the response +* Test action 2: Create a port of the network, storing the "id" parameter returned in the response +* Test action 3: List all ports, verify the port id is found in the list +* **Test assertion 1:** The "id" parameter is found in the port list +* Test action 4: Delete the port using the stored "id" parameter +* Test action 5: List all ports, verify the port is no longer present in the list +* **Test assertion 2:** The port "id" parameter is not present in list +* Test action 6: Delete the network created in test action 1, using the stored network id +* Test action 7: List all networks, verifying the network id is no longer present +* **Test assertion 3:** The "id" parameter is not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to use list commands to list the networks and ports on +the SUT API. Specifically it verifies that: + +* Port list command to list all ports, the created port is found in the list. +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +------------------------------------------------------- +Test Case 10 - Show Key/Valus Details of an IPv6 Port +------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.tc010.port_show_details + +Use case specification +---------------------- + +This test case evaluates the SUT ability of showing the port +details, the values in the details should be equal to the values to create the port, +the reference is, + +tempest.api.network.test_ports.PortsIpV6TestJSON.test_show_port + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" parameter returned in the response +* Test action 2: Create a port of the network, storing the "id" parameter returned in the response +* Test action 3: Show the details of the port, verify the stored port's id + in test action 2 exists in the details +* **Test assertion 1:** The "id" parameter is found in the port shown details +* Test action 4: Verify the values in the details of the port are the same as the values + to create the port +* **Test assertion 2:** The values in the details of the port are the same as the values + to create the port +* Test action 5: Delete the port using the stored "id" parameter +* Test action 6: List all ports, verify the port is no longer present in the list +* **Test assertion 3:** The port "id" parameter is not present in list +* Test action 7: Delete the network created in test action 1, using the stored network id +* Test action 8: List all networks, verifying the network id is no longer present +* **Test assertion 4:** The "id" parameter is not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to use show commands to show port details on the SUT API. +Specifically it verifies that: + +* Port show commands to show the details of the port, whose id is in the details +* Port show commands to show the details of the port, whose values are the same as the values + to create the port +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +--------------------------------------------------------- +Test Case 11 - Add Multiple Interfaces for an IPv6 Router +--------------------------------------------------------- + +Short name +----------- + +opnfv.ipv6.router_add_multiple_interface + +Use case specification +---------------------- + +This test case evaluates the SUT ability of adding multiple interface +to a router, the reference is, + +tempest.api.network.test_routers.RoutersIpV6Test.test_add_multiple_router_interfaces + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create 2 networks named network01 and network02 sequentially, + storing the "id" parameters returned in the response +* Test action 2: Create an IPv6 subnet01 in network01, an IPv6 subnet02 in network02 sequentially, + storing the "id" parameters returned in the response +* Test action 3: Create a router, storing the "id" parameter returned in the response +* Test action 4: Create interface01 with subnet01 and the router +* Test action 5: Verify the router_id stored in test action 3 equals to the interface01's 'device_id' + and subnet01_id stored in test action 2 equals to the interface01's 'subnet_id' +* **Test assertion 1:** the router_id equals to the interface01's 'device_id' + and subnet01_id equals to the interface01's 'subnet_id' +* Test action 5: Create interface02 with subnet02 and the router +* Test action 6: Verify the router_id stored in test action 3 equals to the interface02's 'device_id' + and subnet02_id stored in test action 2 equals to the interface02's 'subnet_id' +* **Test assertion 2:** the router_id equals to the interface02's 'device_id' + and subnet02_id equals to the interface02's 'subnet_id' +* Test action 7: Delete the interfaces, router, IPv6 subnets and networks, networks, subnets, then list + all interfaces, ports, IPv6 subnets, networks, the test passes if the deleted ones + are not found in the list. +* **Test assertion 3:** The interfaces, router, IPv6 subnets and networks ids are not present in the lists + after deleting + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to use bulk create commands to create networks, IPv6 subnets and ports on +the SUT API. Specifically it verifies that: + +* Interface create commands to create interface with IPv6 subnet and router, interface 'device_id' and + 'subnet_id' should equal to the router id and IPv6 subnet id, respectively. +* Interface create commands to create multiple interface with the same router and multiple IPv6 subnets. +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +------------------------------------------------------------------- +Test Case 12 - Add and Remove an IPv6 Router Interface with port_id +------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.router_interface_add_remove_with_port + +Use case specification +---------------------- + +This test case evaluates the SUT abiltiy of adding, removing router interface to +a port, the subnet_id and port_id of the interface will be checked, +the port's device_id will be checked if equals to the router_id or not. The +reference is, + +tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_port_id + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" parameter returned in the response +* Test action 2: Create an IPv6 subnet of the network, storing the "id" parameter returned in the response +* Test action 3: Create a router, storing the "id" parameter returned in the response +* Test action 4: Create a port of the network, storing the "id" parameter returned in the response +* Test action 5: Add router interface to the port created, storing the "id" parameter returned in the response +* Test action 6: Verify the interface's keys include 'subnet_id' and 'port_id' +* **Test assertion 1:** the interface's keys include 'subnet_id' and 'port_id' +* Test action 7: Show the port details, verify the 'device_id' in port details equals to the router id stored + in test action 3 +* **Test assertion 2:** 'device_id' in port details equals to the router id +* Test action 8: Delete the interface, port, router, subnet and network, then list + all interfaces, ports, routers, subnets and networks, the test passes if the deleted + ones are not found in the list. +* **Test assertion 3:** interfaces, ports, routers, subnets and networks are not found in the lists after deleting + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to use add/remove commands to add/remove router interface to the port, +show commands to show port details on the SUT API. Specifically it verifies that: + +* Router_interface add commands to add router interface to a port, the interface's keys should include 'subnet_id' and 'port_id' +* Port show commands to show 'device_id' in port details, which should be equal to the router id +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +--------------------------------------------------------------------- +Test Case 13 - Add and Remove an IPv6 Router Interface with subnet_id +--------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.router_interface_add_remove + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of adding and removing a router interface with +the IPv6 subnet id, the reference is + +tempest.api.network.test_routers.RoutersIpV6Test.test_add_remove_router_interface_with_subnet_id + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a network, storing the "id" parameter returned in the response +* Test action 2: Create an IPv6 subnet with the network created, storing the "id" parameter + returned in the response +* Test action 3: Create a router, storing the "id" parameter returned in the response +* Test action 4: Add a router interface with the stored ids of the router and IPv6 subnet +* **Test assertion 1:** Key 'subnet_id' is included in the added interface's keys +* **Test assertion 2:** Key 'port_id' is included in the added interface's keys +* Test action 5: Show the port info with the stored interface's port id +* **Test assertion 3:**: The stored router id is equal to the device id shown in the port info +* Test action 6: Delete the router interface created in test action 4, using the stored subnet id +* Test action 7: List all router interfaces, verifying the router interface is no longer present +* **Test assertion 4:** The router interface with the stored subnet id is not present + in the router interface list +* Test action 8: Delete the router created in test action 3, using the stored router id +* Test action 9: List all routers, verifying the router id is no longer present +* **Test assertion 5:** The router "id" parameter is not present in the router list +* Test action 10: Delete the subnet created in test action 2, using the stored subnet id +* Test action 11: List all subnets, verifying the subnet id is no longer present +* **Test assertion 6:** The subnet "id" parameter is not present in the subnet list +* Test action 12: Delete the network created in test action 1, using the stored network id +* Test action 13: List all networks, verifying the network id is no longer present +* **Test assertion 7:** The network "id" parameter is not present in the network list + +Pass / fail criteria +'''''''''''''''''''' + +This test evaluates the ability to add and remove router interface with the subnet id on the +SUT API. Specifically it verifies that: + +* Router interface add command returns valid 'subnet_id' parameter which is reported + in the interface's keys +* Router interface add command returns valid 'port_id' parameter which is reported + in the interface's keys +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +------------------------------------------------------------------- +Test Case 14 - Create, Show, List, Update and Delete an IPv6 router +------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.router_create_show_list_update_delete + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of creating, showing, listing, updating +and deleting routers, the reference is + +tempest.api.network.test_routers.RoutersIpV6Test.test_create_show_list_update_delete_router + +Test preconditions +------------------ + +There should exist an OpenStack external network. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a router, set the admin_state_up to be False and external_network_id + to be public network id, storing the "id" parameter returned in the response +* **Test assertion 1:** The created router's admin_state_up is False +* **Test assertion 2:** The created router's external network id equals to the public network id +* Test action 2: Show details of the router created in test action 1, using the stored router id +* **Test assertion 3:** The router's name shown is the same as the router created +* **Test assertion 4:** The router's external network id shown is the same as the public network id +* Test action 3: List all routers and verify if created router is in response message +* **Test assertion 5:** The stored router id is in the router list +* Test action 4: Update the name of router and verify if it is updated +* **Test assertion 6:** The name of router equals to the name used to update in test action 4 +* Test action 5: Show the details of router, using the stored router id +* **Test assertion 7:** The router's name shown equals to the name used to update in test action 4 +* Test action 6: Delete the router created in test action 1, using the stored router id +* Test action 7: List all routers, verifying the router id is no longer present +* **Test assertion 8:** The "id" parameter is not present in the router list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to create, show, list, update and delete router on +the SUT API. Specifically it verifies that: + +* Router create command returns valid "admin_state_up" and "id" parameters which equal to the + "admin_state_up" and "id" returned in the response +* Router show command returns valid "name" parameter which equals to the "name" returned in the response +* Router show command returns valid "external network id" parameters which equals to the public network id +* Router list command returns valid "id" parameter which equals to the stored router "id" +* Router update command returns updated "name" parameters which equals to the "name" used to update +* Router created using create command is able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +--------------------------------------------------------------------------- +Test Case 15 - Create, List, Update, Show and Delete an IPv6 security group +--------------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.security_group_create_list_update_show_delete + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of creating, listing, updating, showing +and deleting security groups, the reference is + +tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_list_update_show_delete_security_group + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a security group, storing the "id" parameter returned in the response +* Test action 2: List all security groups and verify if created security group is there in response +* **Test assertion 1:** The created security group's "id" is found in the list +* Test action 3: Update the name and description of this security group, using the stored id +* Test action 4: Verify if the security group's name and description are updated +* **Test assertion 2:** The security group's name equals to the name used in test action 3 +* **Test assertion 3:** The security group's description equals to the description used in test action 3 +* Test action 5: Show details of the updated security group, using the stored id +* **Test assertion 4:** The security group's name shown equals to the name used in test action 3 +* **Test assertion 5:** The security group's description shown equals to the description used in test action 3 +* Test action 6: Delete the security group created in test action 1, using the stored id +* Test action 7: List all security groups, verifying the security group's id is no longer present +* **Test assertion 6:** The "id" parameter is not present in the security group list + +Pass / fail criteria +'''''''''''''''''''' + +This test evaluates the ability to create list, update, show and delete security group on +the SUT API. Specifically it verifies that: + +* Security group create commands return valid "id" parameter which is reported in the list commands +* Security group update commands return valid "name" and "description" parameters which are + reported in the show commands +* Security group created using create command is able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +--------------------------------------------------------------- +Test Case 16 - Create, Show and Delete IPv6 security group rule +--------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.security_group_rule_create_show_delete + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of creating, showing, listing and deleting +security group rules, the reference is + +tempest.api.network.test_security_groups.SecGroupIPv6Test.test_create_show_delete_security_group_rule + +Test preconditions +------------------ + +None + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create a security group, storing the "id" parameter returned in the response +* Test action 2: Create a rule of the security group with protocol tcp, udp and icmp, respectively, + using the stored security group's id, storing the "id" parameter returned in the response +* Test action 3: Show details of the created security group rule, using the stored id of the + security group rule +* **Test assertion 1:** All the created security group rule's values equal to the rule values + shown in test action 3 +* Test action 4: List all security group rules +* **Test assertion 2:** The stored security group rule's id is found in the list +* Test action 5: Delete the security group rule, using the stored security group rule's id +* Test action 6: List all security group rules, verifying the security group rule's id is no longer present +* **Test assertion 3:** The security group rule "id" parameter is not present in the list +* Test action 7: Delete the security group, using the stored security group's id +* Test action 8: List all security groups, verifying the security group's id is no longer present +* **Test assertion 4:** The security group "id" parameter is not present in the list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to create, show, list and delete security group rules on +the SUT API. Specifically it verifies that: + +* Security group rule create command returns valid values which are reported in the show command +* Security group rule created using create command is able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +---------------------------------------- +Test Case 17 - List IPv6 Security Groups +---------------------------------------- + +Short name +---------- + +opnfv.ipv6.security_group_list + +Use case specification +---------------------- + +This test case evaluates the SUT API ability of listing security groups, the reference is + +tempest.api.network.test_security_groups.SecGroupIPv6Test.test_list_security_groups + +Test preconditions +------------------ + +There should exist a default security group. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: List all security groups +* Test action 2: Verify the default security group exists in the list, the test passes + if the default security group exists +* **Test assertion 1:** The default security group is in the list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to list security groups on the SUT API. +Specifically it verifies that: + +* Security group list command return valid security groups which include the default security group + +Post conditions +--------------- + +None + +---------------------------------------------------------------------------- +Test Case 18 - IPv6 Address Assignment - Dual Stack, SLAAC, DHCPv6 Stateless +---------------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.dhcpv6_stateless + +Use case specification +---------------------- + +This test case evaluates IPv6 address assignment in ipv6_ra_mode 'dhcpv6_stateless' +and ipv6_address_mode 'dhcpv6_stateless'. +In this case, guest instance obtains IPv6 address from OpenStack managed radvd +using SLAAC and optional info from dnsmasq using DHCPv6. This test case then +verifies the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses as well as the router's in the same network, the reference is + +tempest.scenario.test_network_v6.TestGettingAddress.test_dhcp6_stateless_from_os + +Test preconditions +------------------ + +There should exist a public router or a public network. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create one network, storing the "id" parameter returned in the response +* Test action 2: Create one IPv4 subnet of the created network, storing the "id" + parameter returned in the response +* Test action 3: If there exists a public router, use it as the router. Otherwise, + use the public network to create a router +* Test action 4: Connect the IPv4 subnet to the router, using the stored IPv4 subnet id +* Test action 5: Create one IPv6 subnet of the network created in test action 1 in + ipv6_ra_mode 'dhcpv6_stateless' and ipv6_address_mode 'dhcpv6_stateless', + storing the "id" parameter returned in the response +* Test action 6: Connect the IPv6 subnet to the router, using the stored IPv6 subnet id +* Test action 7: Boot two VMs on this network, storing the "id" parameters returned in the response +* **Test assertion 1:** The vNICs of all VMs get all v6 addresses actually assigned +* **Test assertion 2:** Each VM can ping the other's v4 private address +* **Test assertion 3:** The ping6 available VM can ping all of the other's v6 addresses + as well as the router's +* Test action 8: Delete the 2 VMs created in test action 7, using the stored ids +* Test action 9: List all VMs, verifying the ids are no longer present +* **Test assertion 4:** The two "id" parameters are not present in the VM list +* Test action 10: Delete the IPv4 subnet created in test action 2, using the stored ids +* Test action 11: Delete the IPv6 subnet created in test action 5, using the stored ids +* Test action 12: List all subnets, verifying the ids are no longer present +* **Test assertion 5:** The "id" parameters of IPv4 and IPv6 are not present in the list +* Test action 13: Delete the network created in test action 1, using the stored ids +* Test action 14: List all networks, verifying the id is no longer present +* **Test assertion 6:** The "id" parameter is not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to assign IPv6 address in ipv6_ra_mode +'dhcpv6_stateless' and ipv6_address_mode 'dhcpv6_stateless', +and verify the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses as well as the router's in the same network. Specifically it verifies that: + +* The IPv6 addresses in mode 'dhcpv6_stateless' assigned successfully +* The VM can ping the IPv4 and IPv6 private addresses +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +-------------------------------------------------------------------------------------- +Test Case 19 - IPv6 Address Assignment - Dual Net, Dual Stack, SLAAC, DHCPv6 Stateless +-------------------------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.dualnet_dhcpv6_stateless + +Use case specification +---------------------- + +This test case evaluates IPv6 address assignment in ipv6_ra_mode 'dhcpv6_stateless' +and ipv6_address_mode 'dhcpv6_stateless'. +In this case, guest instance obtains IPv6 address from OpenStack managed radvd +using SLAAC and optional info from dnsmasq using DHCPv6. This test case then +verifies the ping6 available VM can ping all of the v4 addresses in another network +and other's v6 addresses as well as the router's in the same network, the reference is + +tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_dhcp6_stateless_from_os + +Test preconditions +------------------ + +There should exists a public router or a public network. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create one network, storing the "id" parameter returned in the response +* Test action 2: Create one IPv4 subnet of the created network, storing the "id" + parameter returned in the response +* Test action 3: If there exists a public router, use it as the router. Otherwise, + use the public network to create a router +* Test action 4: Connect the IPv4 subnet to the router, using the stored IPv4 subnet id +* Test action 5: Create another network, storing the "id" parameters returned in the response +* Test action 6: Create one IPv6 subnet of network created in test action 5 in + ipv6_ra_mode 'dhcpv6_stateless' and ipv6_address_mode 'dhcpv6_stateless', + storing the "id" parameter returned in the response +* Test action 7: Connect the IPv6 subnet to the router, using the stored IPv6 subnet id +* Test action 8: Boot two VMs on these two networks, storing the "id" parameters returned in the response +* Test action 9: Turn on 2nd NIC of each VM +* **Test assertion 1:** The vNICs of all VMs get all v6 addresses actually assigned +* **Test assertion 2:** Each VM can ping the other's v4 private address +* **Test assertion 3:** The ping6 available VM can ping all of the other's v6 addresses + as well as the router's +* Test action 10: Delete the 2 VMs created in test action 8, using the stored ids +* Test action 11: List all VMs, verifying the ids are no longer present +* **Test assertion 4:** The two "id" parameters are not present in the VM list +* Test action 12: Delete the IPv4 subnet created in test action 2, using the stored id +* Test action 13: Delete the IPv6 subnet created in test action 6, using the stored id +* Test action 14: List all subnets, verifying the ids are no longer present +* **Test assertion 5:** The "id" parameters of IPv4 and IPv6 are not present in the list +* Test action 15: Delete the 2 networks created in test action 1 and 5, using the stored ids +* Test action 16: List all networks, verifying the ids are no longer present +* **Test assertion 6:** The two "id" parameters are not present in the network list + +Pass / fail criteria +'''''''''''''''''''' + +This test evaluates the ability to assign IPv6 address in ipv6_ra_mode 'dhcpv6_stateless' +and ipv6_address_mode 'dhcpv6_stateless', +and verify the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses as well as the router's in another network. Specifically it verifies that: + +* The IPv6 addresses in mode 'dhcpv6_stateless' assigned successfully +* The VM can ping the IPv4 and IPv6 private addresses +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +----------------------------------------------------------------------------------------------- +Test Case 20 - IPv6 Address Assignment - Multiple Prefixes, Dual Stack, SLAAC, DHCPv6 Stateless +----------------------------------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.multiple_prefixes_dhcpv6_stateless + +Use case specification +---------------------- + +This test case evaluates IPv6 address assignment in ipv6_ra_mode 'dhcpv6_stateless' +and ipv6_address_mode 'dhcpv6_stateless'. +In this case, guest instance obtains IPv6 address from OpenStack managed radvd +using SLAAC and optional info from dnsmasq using DHCPv6. This test case then +verifies the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses as well as the router's in the same network, the reference is + +tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_dhcpv6_stateless + +Test preconditions +------------------ + +There should exist a public router or a public network. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create one network, storing the "id" parameter returned in the response +* Test action 2: Create one IPv4 subnet of the created network, storing the "id" + parameter returned in the response +* Test action 3: If there exists a public router, use it as the router. Otherwise, + use the public network to create a router +* Test action 4: Connect the IPv4 subnet to the router, using the stored IPv4 subnet id +* Test action 5: Create two IPv6 subnets of the network created in test action 1 in + ipv6_ra_mode 'dhcpv6_stateless' and ipv6_address_mode 'dhcpv6_stateless', + storing the "id" parameters returned in the response +* Test action 6: Connect the two IPv6 subnets to the router, using the stored IPv6 subnet id +* Test action 7: Boot two VMs on this network, storing the "id" parameters returned in the response +* **Test assertion 1:** The vNICs of all VMs get all v6 addresses actually assigned +* **Test assertion 2:** Each VM can ping the other's v4 private address +* **Test assertion 3:** The ping6 available VM can ping all of the other's v6 addresses + as well as the router's +* Test action 8: Delete the 2 VMs created in test action 7, using the stored ids +* Test action 9: List all VMs, verifying the ids are no longer present +* **Test assertion 4:** The two "id" parameters are not present in the VM list +* Test action 10: Delete the IPv4 subnet created in test action 2, using the stored ids +* Test action 11: Delete two IPv6 subnets created in test action 5, using the stored ids +* Test action 12: List all subnets, verifying the ids are no longer present +* **Test assertion 5:** The "id" parameters of IPv4 and IPv6 are not present in the list +* Test action 13: Delete the network created in test action 1, using the stored ids +* Test action 14: List all networks, verifying the id is no longer present +* **Test assertion 6:** The "id" parameter is not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to assign IPv6 address in ipv6_ra_mode 'dhcpv6_stateless' +and ipv6_address_mode 'dhcpv6_stateless', +and verify the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses with different prefixes as well as the router's in the same network. +Specifically it verifies that: + +* The different prefixes IPv6 addresses in mode 'dhcpv6_stateless' assigned successfully +* The VM can ping the IPv4 and IPv6 private addresses +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +--------------------------------------------------------------------------------------------------------- +Test Case 21 - IPv6 Address Assignment - Dual Net, Multiple Prefixes, Dual Stack, SLAAC, DHCPv6 Stateless +--------------------------------------------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.dualnet_multiple_prefixes_dhcpv6_stateless + +Use case specification +---------------------- + +This test case evaluates IPv6 address assignment in ipv6_ra_mode 'dhcpv6_stateless' +and ipv6_address_mode 'dhcpv6_stateless'. +In this case, guest instance obtains IPv6 address from OpenStack managed radvd +using SLAAC and optional info from dnsmasq using DHCPv6. This test case then +verifies the ping6 available VM can ping all of the v4 addresses in another network +and other's v6 addresses as well as the router's in the same network, the reference is + +tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_dhcpv6_stateless + +Test preconditions +------------------ + +There should exist a public router or a public network. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create one network, storing the "id" parameter returned in the response +* Test action 2: Create one IPv4 subnet of the created network, storing the "id" + parameter returned in the response +* Test action 3: If there exists a public router, use it as the router. Otherwise, + use the public network to create a router +* Test action 4: Connect the IPv4 subnet to the router, using the stored IPv4 subnet id +* Test action 5: Create another network, storing the "id" parameters returned in the response +* Test action 6: Create two IPv6 subnets of network created in test action 5 in + ipv6_ra_mode 'dhcpv6_stateless' and ipv6_address_mode 'dhcpv6_stateless', + storing the "id" parameters returned in the response +* Test action 7: Connect the two IPv6 subnets to the router, using the stored IPv6 subnet ids +* Test action 8: Boot two VMs on these two networks, storing the "id" parameters returned in the response +* Test action 9: Turn on 2nd NIC of each VM +* **Test assertion 1:** The vNICs of all VMs get all v6 addresses actually assigned +* **Test assertion 2:** Each VM can ping the other's v4 private address +* **Test assertion 3:** The ping6 available VM can ping all of the other's v6 addresses + as well as the router's +* Test action 10: Delete the 2 VMs created in test action 8, using the stored ids +* Test action 11: List all VMs, verifying the ids are no longer present +* **Test assertion 4:** The two "id" parameters are not present in the VM list +* Test action 12: Delete the IPv4 subnet created in test action 2, using the stored ids +* Test action 13: Delete two IPv6 subnets created in test action 6, using the stored ids +* Test action 14: List all subnets, verifying the ids are no longer present +* **Test assertion 5:** The "id" parameters of IPv4 and IPv6 are not present in the list +* Test action 15: Delete the 2 networks created in test action 1 and 5, using the stored ids +* Test action 16: List all networks, verifying the ids are no longer present +* **Test assertion 6:** The two "id" parameters are not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to assign IPv6 address in ipv6_ra_mode 'dhcpv6_stateless' +and ipv6_address_mode 'dhcpv6_stateless', +and verify the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses with different prefixes as well as the router's in another network. +Specifically it verifies that: + +* The IPv6 addresses in mode 'dhcpv6_stateless' assigned successfully +* The VM can ping the IPv4 and IPv6 private addresses +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +---------------------------------------------------------- +Test Case 22 - IPv6 Address Assignment - Dual Stack, SLAAC +---------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.slaac + +Use case specification +---------------------- + +This test case evaluates IPv6 address assignment in ipv6_ra_mode 'slaac' and +ipv6_address_mode 'slaac'. +In this case, guest instance obtains IPv6 address from OpenStack managed radvd +using SLAAC. This test case then verifies the ping6 available VM can ping all +of the v4 addresses and other's v6 addresses as well as the router's in the +same network, the reference is + +tempest.scenario.test_network_v6.TestGettingAddress.test_slaac_from_os + +Test preconditions +------------------ + +There should exist a public router or a public network. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create one network, storing the "id" parameter returned in the response +* Test action 2: Create one IPv4 subnet of the created network, storing the "id" + parameter returned in the response +* Test action 3: If there exists a public router, use it as the router. Otherwise, + use the public network to create a router +* Test action 4: Connect the IPv4 subnet to the router, using the stored IPv4 subnet id +* Test action 5: Create one IPv6 subnet of the network created in test action 1 in + ipv6_ra_mode 'slaac' and ipv6_address_mode 'slaac', storing the "id" parameter returned in the response +* Test action 6: Connect the IPv6 subnet to the router, using the stored IPv6 subnet id +* Test action 7: Boot two VMs on this network, storing the "id" parameters returned in the response +* **Test assertion 1:** The vNICs of all VMs get all v6 addresses actually assigned +* **Test assertion 2:** Each VM can ping the other's v4 private address +* **Test assertion 3:** The ping6 available VM can ping all of the other's v6 addresses + as well as the router's +* Test action 8: Delete the 2 VMs created in test action 7, using the stored ids +* Test action 9: List all VMs, verifying the ids are no longer present +* **Test assertion 4:** The two "id" parameters are not present in the VM list +* Test action 10: Delete the IPv4 subnet created in test action 2, using the stored ids +* Test action 11: Delete the IPv6 subnet created in test action 5, using the stored ids +* Test action 12: List all subnets, verifying the ids are no longer present +* **Test assertion 5:** The "id" parameters of IPv4 and IPv6 are not present in the list +* Test action 13: Delete the network created in test action 1, using the stored ids +* Test action 14: List all networks, verifying the id is no longer present +* **Test assertion 6:** The "id" parameter is not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to assign IPv6 address in ipv6_ra_mode 'slaac' +and ipv6_address_mode 'slaac', +and verify the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses as well as the router's in the same network. Specifically it verifies that: + +* The IPv6 addresses in mode 'slaac' assigned successfully +* The VM can ping the IPv4 and IPv6 private addresses +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +-------------------------------------------------------------------- +Test Case 23 - IPv6 Address Assignment - Dual Net, Dual Stack, SLAAC +-------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.dualnet_slaac + +Use case specification +---------------------- + +This test case evaluates IPv6 address assignment in ipv6_ra_mode 'slaac' and +ipv6_address_mode 'slaac'. +In this case, guest instance obtains IPv6 address from OpenStack managed radvd +using SLAAC. This test case then verifies the ping6 available VM can ping all +of the v4 addresses in another network and other's v6 addresses as well as the +router's in the same network, the reference is + +tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_slaac_from_os + +Test preconditions +------------------ + +There should exist a public router or a public network. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create one network, storing the "id" parameter returned in the response +* Test action 2: Create one IPv4 subnet of the created network, storing the "id" + parameter returned in the response +* Test action 3: If there exists a public router, use it as the router. Otherwise, + use the public network to create a router +* Test action 4: Connect the IPv4 subnet to the router, using the stored IPv4 subnet id +* Test action 5: Create another network, storing the "id" parameter returned in the response +* Test action 6: Create one IPv6 subnet of network created in test action 5 in + ipv6_ra_mode 'slaac' and ipv6_address_mode 'slaac', storing the "id" parameter returned in the response +* Test action 7: Connect the IPv6 subnet to the router, using the stored IPv6 subnet id +* Test action 8: Boot two VMs on these two networks, storing the "id" parameters returned in the response +* Test action 9: Turn on 2nd NIC of each VM +* **Test assertion 1:** The vNICs of all VMs get all v6 addresses actually assigned +* **Test assertion 2:** Each VM can ping the other's v4 private address +* **Test assertion 3:** The ping6 available VM can ping all of the other's v6 addresses + as well as the router's +* Test action 10: Delete the 2 VMs created in test action 8, using the stored ids +* Test action 11: List all VMs, verifying the ids are no longer present +* **Test assertion 4:** The two "id" parameters are not present in the VM list +* Test action 12: Delete the IPv4 subnet created in test action 2, using the stored ids +* Test action 13: Delete the IPv6 subnet created in test action 6, using the stored ids +* Test action 14: List all subnets, verifying the ids are no longer present +* **Test assertion 5:** The "id" parameters of IPv4 and IPv6 are not present in the list +* Test action 15: Delete the 2 networks created in test action 1 and 5, using the stored ids +* Test action 16: List all networks, verifying the ids are no longer present +* **Test assertion 6:** The two "id" parameters are not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to assign IPv6 address in ipv6_ra_mode 'slaac' +and ipv6_address_mode 'slaac', +and verify the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses as well as the router's in another network. Specifically it verifies that: + +* The IPv6 addresses in mode 'slaac' assigned successfully +* The VM can ping the IPv4 and IPv6 private addresses +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +----------------------------------------------------------------------------- +Test Case 24 - IPv6 Address Assignment - Multiple Prefixes, Dual Stack, SLAAC +----------------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.multiple_prefixes_slaac + +Use case specification +---------------------- + +This test case evaluates IPv6 address assignment in ipv6_ra_mode 'slaac' and +ipv6_address_mode 'slaac'. +In this case, guest instance obtains IPv6 address from OpenStack managed radvd +using SLAAC. This test case then verifies the ping6 available VM can ping all +of the v4 addresses and other's v6 addresses as well as the router's in the +same network, the reference is + +tempest.scenario.test_network_v6.TestGettingAddress.test_multi_prefix_slaac + +Test preconditions +------------------ + +There should exists a public router or a public network. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create one network, storing the "id" parameter returned in the response +* Test action 2: Create one IPv4 subnet of the created network, storing the "id + parameters returned in the response +* Test action 3: If there exists a public router, use it as the router. Otherwise, + use the public network to create a router +* Test action 4: Connect the IPv4 subnet to the router, using the stored IPv4 subnet id +* Test action 5: Create two IPv6 subnets of the network created in test action 1 in + ipv6_ra_mode 'slaac' and ipv6_address_mode 'slaac', storing the "id" parameters returned in the response +* Test action 6: Connect the two IPv6 subnets to the router, using the stored IPv6 subnet id +* Test action 7: Boot two VMs on this network, storing the "id" parameters returned in the response +* **Test assertion 1:** The vNICs of all VMs get all v6 addresses actually assigned +* **Test assertion 2:** Each VM can ping the other's v4 private address +* **Test assertion 3:** The ping6 available VM can ping all of the other's v6 addresses + as well as the router's +* Test action 8: Delete the 2 VMs created in test action 7, using the stored ids +* Test action 9: List all VMs, verifying the ids are no longer present +* **Test assertion 4:** The two "id" parameters are not present in the VM list +* Test action 10: Delete the IPv4 subnet created in test action 2, using the stored ids +* Test action 11: Delete two IPv6 subnets created in test action 5, using the stored ids +* Test action 12: List all subnets, verifying the ids are no longer present +* **Test assertion 5:** The "id" parameters of IPv4 and IPv6 are not present in the list +* Test action 13: Delete the network created in test action 1, using the stored ids +* Test action 14: List all networks, verifying the id is no longer present +* **Test assertion 6:** The "id" parameter is not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to assign IPv6 address in ipv6_ra_mode 'slaac' +and ipv6_address_mode 'slaac', +and verify the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses with different prefixes as well as the router's in the same network. +Specifically it verifies that: + +* The different prefixes IPv6 addresses in mode 'slaac' assigned successfully +* The VM can ping the IPv4 and IPv6 private addresses +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + +--------------------------------------------------------------------------------------- +Test Case 25 - IPv6 Address Assignment - Dual Net, Dual Stack, Multiple Prefixes, SLAAC +--------------------------------------------------------------------------------------- + +Short name +---------- + +opnfv.ipv6.dualnet_multiple_prefixes_slaac + +Use case specification +---------------------- + +This test case evaluates IPv6 address assignment in ipv6_ra_mode 'slaac' and +ipv6_address_mode 'slaac'. +In this case, guest instance obtains IPv6 address from OpenStack managed radvd +using SLAAC. This test case then verifies the ping6 available VM can ping all +of the v4 addresses in another network and other's v6 addresses as well as the +router's in the same network, the reference is + +tempest.scenario.test_network_v6.TestGettingAddress.test_dualnet_multi_prefix_slaac + +Test preconditions +------------------ + +There should exist a public router or a public network. + +Basic test flow execution description and pass/fail criteria +------------------------------------------------------------ + +Test execution +''''''''''''''' + +* Test action 1: Create one network, storing the "id" parameter returned in the response +* Test action 2: Create one IPv4 subnet of the created network, storing the "id" + parameters returned in the response +* Test action 3: If there exists a public router, use it as the router. Otherwise, + use the public network to create a router +* Test action 4: Connect the IPv4 subnet to the router, using the stored IPv4 subnet id +* Test action 5: Create another network, storing the "id" parameters returned in the response +* Test action 6: Create two IPv6 subnets of network created in test action 5 in + ipv6_ra_mode 'slaac' and ipv6_address_mode 'slaac', storing the "id" parameters returned in the response +* Test action 7: Connect the two IPv6 subnets to the router, using the stored IPv6 subnet ids +* Test action 8: Boot two VMs on these two networks, storing the "id" parameters returned in the response +* Test action 9: Turn on 2nd NIC of each VM +* **Test assertion 1:** The vNICs of all VMs get all v6 addresses actually assigned +* **Test assertion 2:** Each VM can ping the other's v4 private address +* **Test assertion 3:** The ping6 available VM can ping all of the other's v6 addresses + as well as the router's +* Test action 10: Delete the 2 VMs created in test action 8, using the stored ids +* Test action 11: List all VMs, verifying the ids are no longer present +* **Test assertion 4:** The two "id" parameters are not present in the VM list +* Test action 12: Delete the IPv4 subnet created in test action 2, using the stored ids +* Test action 13: Delete two IPv6 subnets created in test action 6, using the stored ids +* Test action 14: List all subnets, verifying the ids are no longer present +* **Test assertion 5:** The "id" parameters of IPv4 and IPv6 are not present in the list +* Test action 15: Delete the 2 networks created in test action 1 and 5, using the stored ids +* Test action 16: List all networks, verifying the ids are no longer present +* **Test assertion 6:** The two "id" parameters are not present in the network list + +Pass / fail criteria +''''''''''''''''''''' + +This test evaluates the ability to assign IPv6 address in ipv6_ra_mode 'slaac' +and ipv6_address_mode 'slaac', +and verify the ping6 available VM can ping all of the v4 addresses and other's +v6 addresses with different prefixes as well as the router's in another network. +Specifically it verifies that: + +* The IPv6 addresses in mode 'slaac' assigned successfully +* The VM can ping the IPv4 and IPv6 private addresses +* All items created using create commands are able to be removed using the returned identifiers + +Post conditions +--------------- + +None + + -- cgit 1.2.3-korg