From 9dee0a4b210d9c682464f7cf8052b803139b1b95 Mon Sep 17 00:00:00 2001 From: MatthewLi Date: Sat, 14 Jan 2017 04:08:13 -0500 Subject: dovetail tool userguide document JIRA: DOVETAIL-182 Change-Id: Icbfa347dda3840520484d10b9d539da9c8f1d31c Signed-off-by: MatthewLi --- docs/dovetailtool/dovetail.tool.cli.rst | 165 ++++++++++--------- docs/dovetailtool/dovetail.tool.configtemplate.rst | 125 --------------- docs/dovetailtool/dovetail.tool.configuration.rst | 35 ----- docs/dovetailtool/dovetail.tool.installation.rst | 90 +++++++---- docs/dovetailtool/dovetail.tool.template.rst | 174 +++++++++++++++++++++ docs/dovetailtool/index.rst | 3 +- 6 files changed, 314 insertions(+), 278 deletions(-) delete mode 100644 docs/dovetailtool/dovetail.tool.configtemplate.rst delete mode 100644 docs/dovetailtool/dovetail.tool.configuration.rst create mode 100644 docs/dovetailtool/dovetail.tool.template.rst (limited to 'docs/dovetailtool') diff --git a/docs/dovetailtool/dovetail.tool.cli.rst b/docs/dovetailtool/dovetail.tool.cli.rst index bdcf46e4..f13bc289 100644 --- a/docs/dovetailtool/dovetail.tool.cli.rst +++ b/docs/dovetailtool/dovetail.tool.cli.rst @@ -3,21 +3,80 @@ .. http://creativecommons.org/licenses/by/4.0 .. (c) OPNFV, Huawei Technologies Co.,Ltd and others. -Command Line Interface -====================== +================================ +Dovetail Command-line Interface +================================ -Dovetail supports modifying some parameters at the run-time by using the command -line interface (CLI). The parameters can be defined through a config file by -developers easily and then be used at the run-time. -The CLI now fits all three kinds of running: directly running the python script, -running after setup and running within Docker containers. +Command Line Introduction +========================== -Define CLI with config file ---------------------------- +The Dovetail command-line interface provides a method for interacting with +Dovetail from the console. For help on the ``dovetail`` command, enter: -For easy to be modified, Dovetail provides ``dovetail/dovetail/conf/cmd_config.yml`` -to define CLI automatically. +:: + + dovetail --help + +**dovetail** optional arguments: + +:: + + --version + show program's version number and exit + list + list the testsuite details + show + show the testcase details + run + run the testcases + +For **dovetail list**, if the ```` is omitted, +all the testsuites defined under ``/dovetail/compliance`` directory +and related testcases will be listed, otherwise, +the test area and test cases defined in ```` are listed. + +For **dovetail show**, the ```` is required, the contents defined +in ``.yml`` is shown. + +For **dovetail run**, by running ``dovetail run --help``, the ``dovetail run`` +usage is shown as: + ++------------------------+-----------------------------------------------------+ +|Options | | ++========================+=====================================================+ +| -t, --SUT_TYPE |Installer type of the system under test (SUT). | ++------------------------+-----------------------------------------------------+ +| --creds |Openstack credential file location | ++------------------------+-----------------------------------------------------+ +| -i, --SUT_IP |IP of the system under test (SUT). | ++------------------------+-----------------------------------------------------+ +| -d, --debug |True for showing debug log on screen. | ++------------------------+-----------------------------------------------------+ +| -f, --func_tag |Overwrite tag for functest docker container (e.g. | +| |stable or latest) | ++------------------------+-----------------------------------------------------+ +| -y, --yard_tag |Overwrite tag for yardstick docker container (e.g. | +| |stable or latest) | ++------------------------+-----------------------------------------------------+ +| --testarea |compliance testarea within testsuite | ++------------------------+-----------------------------------------------------+ +| --testsuite |compliance testsuite. | ++------------------------+-----------------------------------------------------+ +| -h, --help |Show this message and exit. | ++------------------------+-----------------------------------------------------+ + + +If no arguments are given, the default testsuite will be performed, i.e., the ``compliance_set`` +testsuite with default configurations. + +For more information about **dovetail** command-line interface, please refer to the wiki page [3]_ + +Parameters definition with config file +====================================== + +The default **dovetail run** parameters can be modified in +``dovetail/dovetail/conf/cmd_config.yml``, which is shown as: :: @@ -71,40 +130,14 @@ to define CLI automatically. default: 'full' help: 'compliance testarea within testsuite' -Dovetail uses click module in python to parse parameters defined in the above -config file. The basic config file shown above contains two subsections: -**arguments** and **options** corresponding to two types of parameters in click. - -Add options -+++++++++++ - -Just as the name suggested, option parameters can either be given or not by users -after adding into CLI. - -Then how to add an option for developers? - -For each option, it at least needs a key **flags** to give its name. Customarily, -each option has two names, full name and short name, and they are begin with '--' -and '-' respectively. All other keys should be consistent with click's keys. - -Take option **scenario** as the example. Its full name is '--scenario', and its -short name is '-s'. Actually full name is necessary but short name is optional. -The full name '--scenario' should be the same with the block's name **scenario**. -**default** section gives the default value of this option if it doesn't given -by users. Without the **default** section, it will be set None. **help** section -offers its help message that will be shown when excute -h/--help command. For -more information about click, please refer to: http://click.pocoo.org/5/ - -Add arguments -+++++++++++++ +The Click module is used to parse parameters defined in the above config file, +two subsections are included in this file, ``arguments`` and ``options``, +which corresponds to two types of parameters in Click. -Arguments must given orderly by users once they are defined in the config file. -The Dovetail tool doesn't need any argument parameters currently. However, here -just give a simple example for its format. - -Arguments also need subsection **flags** to give its name. Each argument can just -have one name, and the name should be the same with the key of this section. Other -keys should also be consistent with the click module. +Arguments and Options ++++++++++++++++++++++ +Only ``options`` is used currently, which means parameters can be given (or not) without +sequence restriction. Config and control ++++++++++++++++++ @@ -131,50 +164,10 @@ the configs will be changed into -e NODE_NAME=dovetail-pod -e DEPLOY_SCENARIO=ha_nosdn -e BUILD_TAG=dovetail -e CI_DEBUG=true -e DEPLOY_TYPE=baremetal' -The config options/arguments can be added or deleted just by modifying +The config options/arguments can be added or deleted by modifying ``cmd_config.yml`` rather than changing the source code. However, for control command, besides adding it into ``cmd_config.yml``, some other operations about the source code are also needed. -Run with CLI ------------- - -For users, they can use CLI to input their own envs at the run-time instead of -modifying the config files of functest or yardstick. So Dovetail can supports -different environments more flexible with CLI. Dovetail now can be run with three -methods, directly running ``run.py`` script, running after setup and running -in Docker containers. The uses of CLI are almost the same for these three methods -and here take the first one as the example. - -All parameters offered by Dovetail can be listed by using help option ``--help``. - -:: - - root@90256c4efd05:~/dovetail/dovetail$ python run.py --help - Usage: run.py [OPTIONS] - - Dovetail compliance test entry! - - Options: - -t, --SUT_TYPE TEXT Installer type of the system under test (SUT). - -f, --func_tag TEXT Overwrite tag for functest docker container (e.g. - stable or latest) - -i, --SUT_IP TEXT IP of the system under test (SUT). - -y, --yard_tag TEXT Overwrite tag for yardstick docker container (e.g. - stable or latest) - -d, --DEBUG TEXT DEBUG for showing debug log. - --testarea TEXT compliance testarea within testsuite - --testsuite TEXT compliance testsuite. - -h, --help Show this message and exit. - -All options listed can be used to input special environment values at the run-time. -For example: - -:: - - python run.py --SUT_TYPE compass -y stable -There is no need to give all these options. If it is not given by CLI, it will -be set with the system's environment value. If it is not included in system's -environment variables, it will be set with the default value in functest/yardstick -config file. +. [3] https://wiki.opnfv.org/display/dovetail/Dovetail+Command+Line diff --git a/docs/dovetailtool/dovetail.tool.configtemplate.rst b/docs/dovetailtool/dovetail.tool.configtemplate.rst deleted file mode 100644 index 9c0748a9..00000000 --- a/docs/dovetailtool/dovetail.tool.configtemplate.rst +++ /dev/null @@ -1,125 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Huawei Technologies Co.,Ltd and others. - -====================== -Config Template Syntax -====================== - -For Dovetail tool, the config files are located in ``dovetail/dovetail/conf``, which are written -in yaml format. As both functest and yardstick are utilized by Dovetail, their configuration files -should be configured as follows, within the ``functest_config.yml`` and ``yardstick_config.yml`` files, -respectively. - -Functest config template syntax -------------------------------- - -An example functest configuration is shown as follows: - -:: - - functest: - image_name: opnfv/functest - docker_tag: latest - envs: '-e INSTALLER_TYPE=compass -e INSTALLER_IP=192.168.200.2 - -e NODE_NAME=dovetail-pod -e DEPLOY_SCENARIO=ha_nosdn - -e BUILD_TAG=dovetail -e CI_DEBUG=true -e DEPLOY_TYPE=baremetal' - opts: '-id --privileged=true' - pre_condition: - cmds: - - 'echo test for precondition' - testcase: - cmds: - - 'python /home/opnfv/repos/functest/ci/prepare_env.py start' - - 'python /home/opnfv/repos/functest/ci/run_tests.py -t {{script_testcase}} -r' - post_condition: - cmds: - - '' - result: - dir: '/home/opnfv/functest/results' - store_type: 'file' - file_path: 'tempest/tempest.log' - db_url: 'http://testresults.opnfv.org/test/api/v1/results?case=%s&last=1' - -- ``image_name`` and ``docker_tag`` sections define the docker image pulled from the public dockerhub. -- ``envs`` should be correctly configed according to the SUT(System Under Test). -- ``pre_condition`` represents some cleanups or preparations. - ``testcase`` represents the testcases running cmds. - ``post_condition`` represents some cleanups needed after all testcases finished. -- ``result`` section gives the directory of the dovetail tool test result. - ``db_url`` gives the database URL of the dovetail results to be stored. - -Yardstick config template syntax ---------------------------------- - -The configuration in ``yardstick_config.yml`` is similiar to ``functest_config.yml``, -and an example is shown as follows: - -:: - - yardstick: - image_name: opnfv/yardstick - docker_tag: latest - envs: '-e INSTALLER_TYPE=compass -e INSTALLER_IP=192.168.200.2 - -e NODE_NAME=dovetail-pod -e DEPLOY_SCENARIO=ha_nosdn - -e BUILD_TAG=dovetail -e CI_DEBUG=true -e DEPLOY_TYPE=baremetal - -e EXTERNAL_NETWORK=ext-net' - opts: '-id --privileged=true' - pre_condition: - cmds: - - 'source /home/opnfv/repos/yardstick/tests/ci/prepare_env.sh && - source /home/opnfv/repos/yardstick/tests/ci/clean_images.sh && cleanup' - - 'source /home/opnfv/repos/yardstick/tests/ci/prepare_env.sh && - cd /home/opnfv/repos/yardstick && source tests/ci/load_images.sh' - testcase: - cmds: - - 'mkdir -p /home/opnfv/yardstick/results/' - - 'cd /home/opnfv/repos/yardstick && source tests/ci/prepare_env.sh && - yardstick task start tests/opnfv/test_cases/{{script_testcase}}.yaml - --output-file /home/opnfv/yardstick/results/{{script_testcase}}.out &> - /home/opnfv/yardstick/results/yardstick.log' - post_condition: - cmds: - - '' - result: - dir: '/home/opnfv/yardstick/results' - store_type: 'file' - file_path: 'yardstick.log' - db_url: 'http://testresults.opnfv.org/test/api/v1/results?case=%s&last=1' - -The main differences between ``yardstick_config.yml`` and ``functest_config.yml`` -are the ``cmds`` subsection. - -Jinja2 template syntax ----------------------- - -Jinja2 module can be used to config the ``{{script_testcase}}``. The -parameters are defined in ``dovetail/dovetail/conf/dovetail_config.yml``: - -:: - - parameters: - - name: testcase - path: '("name",)' - - name: script_testcase - path: '("scripts", "testcase")' - -Here ``path`` is the path defined in the testcase configuration files. -Take ``script_testcase`` as an example. For testcase ``dovetail.ipv6.tc001``: - -:: - - dovetail.ipv6.tc001: - name: dovetail.ipv6.tc001 - objective: VIM ipv6 operations, to create/delete network, port and subnet in bulk operation - scripts: - type: functest - testcase: tempest_smoke_serial - sub_testcase_list: - - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network - - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port - - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet - -The path ("scripts", "testcase") means 'testcase' is the subsection of 'scripts' section. From above, -by following the path ("scripts", "testcase") we can get the value of ``{{script_testcase}}`` is 'tempest_smoke_serial'. diff --git a/docs/dovetailtool/dovetail.tool.configuration.rst b/docs/dovetailtool/dovetail.tool.configuration.rst deleted file mode 100644 index 8e97e73c..00000000 --- a/docs/dovetailtool/dovetail.tool.configuration.rst +++ /dev/null @@ -1,35 +0,0 @@ -.. This work is licensed under a Creative Commons Attribution 4.0 International -.. License. -.. http://creativecommons.org/licenses/by/4.0 -.. (c) OPNFV, Huawei Technologies Co.,Ltd and others. - -========================= -Testcase Template Syntax -========================= - -The testcases used for compliance and certification are defined in the ``dovetail/testcase`` directory, -which are defined in yaml format. Take the testcase ``ipv6.tc001.yml`` as an example, it is shown as: - -:: - - dovetail.ipv6.tc001: - name: dovetail.ipv6.tc001 - objective: VIM ipv6 operations, to create/delete network, port and subnet in bulk operation - scripts: - type: functest - testcase: tempest_smoke_serial - sub_testcase_list: - - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network - - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port - - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet - -- At least three sections named 'name', 'objective', 'scripts' must be included -- Section 'name' distinguishes different test cases used for compliance and certification, - and should start with ``dovetail.`` -- Section 'objective' describes what this testcase does -- Section 'scripts' has subsections such as 'type', 'testcase' and 'sub_testcase_list' -- Two kinds of 'type' is supported by now, functest and yardstick -- For functest, the 'testcase' represents the testcases in slicing/tier, - 'sub_testcase_list' represents the testcases in this slicing compliance and certification will use. - For yardstick, since it is not sliced by now, 'sub_testcase_list' is not needed, only to edit the 'testcase' part - such as ``yardstick_tc027`` diff --git a/docs/dovetailtool/dovetail.tool.installation.rst b/docs/dovetailtool/dovetail.tool.installation.rst index 73a66cd1..5cd511ff 100644 --- a/docs/dovetailtool/dovetail.tool.installation.rst +++ b/docs/dovetailtool/dovetail.tool.installation.rst @@ -19,13 +19,30 @@ running on the SUT (System Under Test): :: - SUT_TYPE, SUT type, e.g., apex, compass, fuel, joid, etc - SUT_IP, SUT external network IP, e.g., 192.168.200.2 - NODE_NAME, this can be shown in the test result for users to see which pod the dovetail tool runs - DEPLOY_SCENARIO, deployment scenario, e.g., os-nosdn-nofeature-ha - BUILD_TAG, this can be shown in the test result for users to identify logs - CI_DEBUG, true for debug information printed and false for not printed - DEPLOY_TYPE, baremetal or virtual + SUT_TYPE + SUT type, e.g., apex, compass, fuel, joid, etc + SUT_IP + SUT external network IP, e.g., 192.168.200.2 + NODE_NAME + this can be shown in the test result for users to see which pod the dovetail tool runs + DEPLOY_SCENARIO + deployment scenario, e.g., os-nosdn-nofeature-ha + BUILD_TAG + this can be shown in the test result for users to identify logs + CI_DEBUG + true for debug information printed and false for not printed + DEPLOY_TYPE + baremetal or virtual + +The above configuration can be achieved by + +- modifying the environment variables in files which live under ``/dovetail/conf/`` directory +- set and use Linux environment variables using ``export`` command +- set and use these variables when using ``dovetail run`` command line, for details see the + `Dovetail Command-line Interface`_ section +- enable the OpenStack credential file, which can be achieved by using + ``dovetail run --creds `` + Dovetail tool installation on local Linux host environment ########################################################## @@ -114,33 +131,33 @@ After environment preparation is complete and test cases added, the Dovetail too :: - python run.py --testsuite compliance_set + dovetail run --testsuite compliance_set -The value ``compliance_set`` passed to the ``testsuite`` flag can be replaced with the test cases yaml file. -If not argument is given, the compliance_set testsuite will be run as the default. +The value ``compliance_set`` passed to the ``testsuite`` flag can be replaced +with the testsuite yaml file name which want to be run. +If no argument is given, the compliance_set testsuite will be run as the default. Moreover, the testcases in given testarea can be run with ``testarea`` command line argument, such as testarea ``ipv6`` in ``compliance_set`` :: - python run.py --testsuite compliance_set --testarea ipv6 + dovetail run --testsuite compliance_set --testarea ipv6 Dovetail provides some sets, ``debug``, ``proposed_tests`` and ``compliance_set``, ``debug`` is used for locally and Continuous Integration(CI) developing purpose, which provides typical testcase examples, feel free to edit it when develops locally, such as only to run a testcase which only takes minutes. ``proposed_tests`` is the testcase -candidate which mainly comes from the wiki link -https://wiki.opnfv.org/display/dovetail/Dovetail+Test+Areas+and+Test+Cases. +candidate which mainly comes from the wiki link [1]_. ``compliance_set`` is used for compliance. Moreover, dovetail tool can be easily extended to support more complicated compliance requirements, such as feature set based or scenario based compliance. -If you want to run ``debug``, just run with +If you want to run the ``debug`` testsuite, just run with :: - python run.py --testsuite debug + dovetail run --testsuite debug Running Dovetail in a Docker container ######################################## @@ -165,7 +182,8 @@ Docker image. :: - sudo docker build -t -f . + cd {dovetail_path}/dovetail/docker + docker build --no-cache -t opnfv/dovetail: --build-arg BRANCH=master . Dovetail Docker container creation ---------------------------------- @@ -178,13 +196,15 @@ Next, create the ``dovetail-docker-env`` file to define the environment paramete DEPLOY_SCENARIO=ha-nosdn CI_DEBUG=true +or if an OpenStack credential file is provided. + Then to instantiate the Dovetail Docker container, execute:: sudo docker run --privileged=true --rm -t \ - --env-file dovetail-docker-env \ + --env-file dovetail-docker-env OR \ -v /home/opnfv/dovetail/results:/home/opnfv/dovetail/results \ -v /var/run/docker.sock:/var/run/docker.sock \ - --name \ + --name (optional) \ opnfv/dovetail: /bin/bash To attach dovetail container and Running test cases @@ -192,16 +212,27 @@ To attach dovetail container and Running test cases Before connecting to the container, you can check the container status by running :: - docker ps -a + sudo docker ps -a Attach to the container by starting it and obtaining a bash prompt with :: - docker exec -it bash + sudo docker exec -it / bash + +Inside the container the following commands can be executed to trigger the testing :: + + dovetail run --testsuite compliance_set -Inside the container the following commands can be executed to trigger the testcases :: +Offline Support +################ - cd /home/opnfv/dovetail/dovetail - python run.py --testsuite compliance_set +There are some SUTs that are isolated from the public internet, +so offline support is needed. The idea is to provide all of the packages of dovetail +release in http://artifacts.opnfv.org, then the user can download and transfer to their inner +development environment. + +The packages are shown in [2]_ + +TO DO: to introduce more when it is mature enough. Results Output ############### @@ -212,11 +243,10 @@ The compliance report is stored in ``/home/opnfv/dovetail/results/dovetail_repor Dovetail Version and Release ############################ -Dovetail version tag is shown in ``setup.cfg``, which will also shown in the -``dovetail report``. At the time of version release, just to set the version value in -``setup.cfg``. +Dovetail version information is defined in ``setup.cfg``. +At the time of release, it is the dovetail team's responsibility to set +the ``version`` value in ``setup.cfg``. + -# TO DO: (which should be discussed) -1)how to pubish version, such as both the online and offline package in some website -or somewhere. -2)provide version download address, userguide, etc. +.. [1] https://wiki.opnfv.org/display/dovetail/Dovetail+Test+Areas+and+Test+Cases. +.. [2] http://artifacts.opnfv.org/dovetail.html. diff --git a/docs/dovetailtool/dovetail.tool.template.rst b/docs/dovetailtool/dovetail.tool.template.rst new file mode 100644 index 00000000..1a483dd9 --- /dev/null +++ b/docs/dovetailtool/dovetail.tool.template.rst @@ -0,0 +1,174 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International +.. License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) OPNFV, Huawei Technologies Co.,Ltd and others. + +================== +Template Syntax +================== + +Testcase Template Syntax +========================= + +The testcases used for compliance and certification are defined in the +``dovetail/testcase`` directory, which are written in yaml format. +Take the testcase ``ipv6.tc001.yml`` as an example. It is shown as: + +:: + + --- + dovetail.ipv6.tc001: + name: dovetail.ipv6.tc001 + objective: Bulk creation and deletion of IPv6 networks, ports and subnets + validate: + type: functest + testcase: tempest_smoke_serial + pre_condition: + - 'echo test for precondition in testcase' + cmds: + - 'functest env prepare' + - 'functest testcase run {{validate_testcase}}' + post_condition: + - 'echo test for precondition in testcase' + report: + sub_testcase_list: + - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network + - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port + - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet + + +- At least three sections named ``name``, ``objective``, ``validate``, + ``report`` must be included +- Section ``name`` distinguishes different test cases used for compliance, + it is composed of 3 parts, ``dovetail.``, belongs to which test area, + and the serial number +- Section ``objective`` briefly describes what this testcase does +- Section ``validate`` defines the scripts and configurations for the + validation of the test case. ``type`` defines which method is used to validate, + 3 ways, i.e., functest, yardstick and shell is supported currently. + ``testcase`` represents the testcases in slicing/tier. +- Section ``report`` defines the sub_testcases to be run. + For ``yardstick``, since it is not sliced by now, + ``sub_testcase_list`` is not needed, only to edit the ``testcase`` part in + section ``validate``, such as ``yardstick_tc027`` + + +Config Template Syntax +======================= + +For Dovetail tool, the config files are located in ``dovetail/dovetail/conf``, which are written +in yaml format. As both functest and yardstick are utilized by Dovetail, their configuration files +should be configured as follows, within the ``functest_config.yml`` and ``yardstick_config.yml`` files, +respectively. + +Functest config template syntax +------------------------------- + +An example of ``functest`` configuration is shown as follows: + +:: + + functest: + image_name: opnfv/functest + docker_tag: latest + envs: '-e INSTALLER_TYPE=compass -e INSTALLER_IP=192.168.200.2 + -e NODE_NAME=dovetail-pod -e DEPLOY_SCENARIO=ha_nosdn + -e BUILD_TAG=dovetail -e CI_DEBUG=true -e DEPLOY_TYPE=baremetal' + opts: '-id --privileged=true' + pre_condition: + cmds: + - 'echo test for precondition' + testcase: + cmds: + - 'python /home/opnfv/repos/functest/ci/prepare_env.py start' + - 'python /home/opnfv/repos/functest/ci/run_tests.py -t {{script_testcase}} -r' + post_condition: + cmds: + - '' + result: + dir: '/home/opnfv/functest/results' + store_type: 'file' + file_path: 'tempest/tempest.log' + db_url: 'http://testresults.opnfv.org/test/api/v1/results?case=%s&last=1' + +- ``image_name`` and ``docker_tag`` sections define the docker image pulled from the public dockerhub. +- ``envs`` should be correctly configed according to the SUT(System Under Test). +- ``pre_condition`` represents some cleanups or preparations. + ``testcase`` represents the testcases running cmds. + ``post_condition`` represents some cleanups needed after all testcases finished. +- ``result`` section gives the directory of the dovetail tool test result. + ``db_url`` gives the database URL of the dovetail results to be stored. + +Yardstick config template syntax +--------------------------------- + +The configuration in ``yardstick_config.yml`` is similiar to ``functest_config.yml``, +and an example is shown as follows: + +:: + + yardstick: + image_name: opnfv/yardstick + docker_tag: latest + envs: '-e INSTALLER_TYPE=compass -e INSTALLER_IP=192.168.200.2 + -e NODE_NAME=dovetail-pod -e DEPLOY_SCENARIO=ha_nosdn + -e BUILD_TAG=dovetail -e CI_DEBUG=true -e DEPLOY_TYPE=baremetal + -e EXTERNAL_NETWORK=ext-net' + opts: '-id --privileged=true' + pre_condition: + cmds: + - 'source /home/opnfv/repos/yardstick/tests/ci/prepare_env.sh && + source /home/opnfv/repos/yardstick/tests/ci/clean_images.sh && cleanup' + - 'source /home/opnfv/repos/yardstick/tests/ci/prepare_env.sh && + cd /home/opnfv/repos/yardstick && source tests/ci/load_images.sh' + testcase: + cmds: + - 'mkdir -p /home/opnfv/yardstick/results/' + - 'cd /home/opnfv/repos/yardstick && source tests/ci/prepare_env.sh && + yardstick task start tests/opnfv/test_cases/{{script_testcase}}.yaml + --output-file /home/opnfv/yardstick/results/{{script_testcase}}.out &> + /home/opnfv/yardstick/results/yardstick.log' + post_condition: + cmds: + - '' + result: + dir: '/home/opnfv/yardstick/results' + store_type: 'file' + file_path: 'yardstick.log' + db_url: 'http://testresults.opnfv.org/test/api/v1/results?case=%s&last=1' + +The main differences between ``yardstick_config.yml`` and ``functest_config.yml`` +are the ``cmds`` subsection. + +Jinja2 template syntax +---------------------- + +Jinja2 module can be used to config the ``{{script_testcase}}``. The +parameters are defined in ``dovetail/dovetail/conf/dovetail_config.yml``: + +:: + + parameters: + - name: testcase + path: '("name",)' + - name: script_testcase + path: '("scripts", "testcase")' + +Here ``path`` is the path defined in the testcase configuration files. +Take ``script_testcase`` as an example. For testcase ``dovetail.ipv6.tc001``: + +:: + + dovetail.ipv6.tc001: + name: dovetail.ipv6.tc001 + objective: VIM ipv6 operations, to create/delete network, port and subnet in bulk operation + scripts: + type: functest + testcase: tempest_smoke_serial + sub_testcase_list: + - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_network + - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_port + - tempest.api.network.test_networks.BulkNetworkOpsIpV6Test.test_bulk_create_delete_subnet + +The path ("scripts", "testcase") means 'testcase' is the subsection of 'scripts' section. From above, +by following the path ("scripts", "testcase") we can get the value of ``{{script_testcase}}`` is 'tempest_smoke_serial'. diff --git a/docs/dovetailtool/index.rst b/docs/dovetailtool/index.rst index 676c72db..b095704a 100644 --- a/docs/dovetailtool/index.rst +++ b/docs/dovetailtool/index.rst @@ -12,6 +12,5 @@ Dovetail Overview dovetail.tool.overview.rst dovetail.tool.installation.rst - dovetail.tool.configuration.rst - dovetail.tool.configtemplate.rst + dovetail.tool.template.rst dovetail.tool.cli.rst -- cgit 1.2.3-korg