From 72a1f8c92f1692f1ea8dcb5bc706ec9939c30e0a Mon Sep 17 00:00:00 2001 From: Tomi Juvonen Date: Tue, 13 Oct 2020 16:37:57 +0300 Subject: Documents up-to-date According to document guidelines Release notes ETSI FEAT03 support and other minor enhancements JIRA: DOCTOR-143 Signed-off-by: Tomi Juvonen Change-Id: Iefa74004dfada376d1ab05c0149029a26f822275 --- docs/release/userguide/monitors.rst | 37 +++++++++++++++++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 docs/release/userguide/monitors.rst (limited to 'docs/release/userguide/monitors.rst') diff --git a/docs/release/userguide/monitors.rst b/docs/release/userguide/monitors.rst new file mode 100644 index 00000000..eeb5e226 --- /dev/null +++ b/docs/release/userguide/monitors.rst @@ -0,0 +1,37 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 + +Monitor Types and Limitations +============================= + +Currently there are two monitor types supported: sample and collectd + +Sample Monitor +-------------- + +Sample monitor type pings the compute host from the control host and calculates the +notification time after the ping timeout. +Also if inspector type is sample, the compute node needs to communicate with the control +node on port 12345. This port needs to be opened for incomming traffic on control node. + +Collectd Monitor +---------------- + +Collectd monitor type uses collectd daemon running ovs_events plugin. Collectd runs on +compute to send instant notification to the control node. The notification time is +calculated by using the difference of time at which compute node sends notification to +control node and the time at which consumer is notified. The time on control and compute +node has to be synchronized for this reason. For further details on setting up collectd +on the compute node, use the following link: +:doc:`` + + +Collectd monitors an interface managed by OVS. If the interface is not be assigned +an IP, the user has to provide the name of interface to be monitored. The command to +launch the doctor test in that case is: +MONITOR_TYPE=collectd INSPECTOR_TYPE=sample INTERFACE_NAME=example_iface ./run.sh + +If the interface name or IP is not provided, the collectd monitor type will monitor the +default management interface. This may result in the failure of doctor run.sh test case. +The test case sets the monitored interface down and if the inspector (sample or congress) +is running on the same subnet, collectd monitor will not be able to communicate with it. -- cgit 1.2.3-korg