From b209f93f3a19ff6c0184b496182c8d34c30f3e38 Mon Sep 17 00:00:00 2001 From: Ryota MIBU Date: Mon, 8 Feb 2016 22:41:40 +0900 Subject: docs: fix filename and test4composite Change-Id: I78366611efd26987a71c3ecf25d2406e6f489cca Signed-off-by: Ryota MIBU --- docs/configguide/featureconfig.rst | 49 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 docs/configguide/featureconfig.rst (limited to 'docs/configguide/featureconfig.rst') diff --git a/docs/configguide/featureconfig.rst b/docs/configguide/featureconfig.rst new file mode 100644 index 00000000..5ca17b9b --- /dev/null +++ b/docs/configguide/featureconfig.rst @@ -0,0 +1,49 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 + +Doctor Configuration +==================== + +.. + This section will be compiled into OPNFV composite document. + +Doctor Inspector +---------------- + +Doctor Inspector is suggested to be placed in one of the controller nodes, +but it can be put on any host where Doctor Monitor can reach and accessible +to the OpenStack Controller (Nova). + +Make sure OpenStack env parameters are set properly, so that Doctor Inspector +can issue admin actions such as compute host force-down and state update of VM. + +Then, you can configure Doctor Inspector as follows: + +.. code-block:: bash + + git clone https://gerrit.opnfv.org/gerrit/doctor -b stable/brahmaputra + cd doctor/tests + INSPECTOR_PORT=12345 + python inspector.py $INSPECTOR_PORT > inspector.log 2>&1 & + +Doctor Monitor +-------------- + +Doctor Monitors are suggested to be placed in one of the controller nodes, +but those can be put on any host which is reachable to target compute host and +accessible to the Doctor Inspector. +You need to configure Monitors for all compute hosts one by one. + +Make sure OpenStack env parameters are set properly, so that Doctor Inspector +can issue admin actions such as compute host force-down and state update of VM. + +Then, you can configure Doctor Monitor as follows: + +.. code-block:: bash + + git clone https://gerrit.opnfv.org/gerrit/doctor -b stable/brahmaputra + cd doctor/tests + INSPECTOR_PORT=12345 + COMPUTE_HOST='overcloud-novacompute-0' + sudo python monitor.py "$COMPUTE_HOST" \ + "http://127.0.0.1:$INSPECTOR_PORT/events" > monitor.log 2>&1 & -- cgit 1.2.3-korg