From 0e241989f438afbeb439f122b3765e2742fc54ab Mon Sep 17 00:00:00 2001 From: blsaws Date: Tue, 2 Aug 2016 16:16:46 -0700 Subject: Correct line endings JIRA: COPPER-4 Change-Id: Icb470d8ba9f477b0696f2abaab8271bdbf0fcb57 Signed-off-by: blsaws --- tests/smtp_ingress.sh | 344 +++++++++++++++++++++++++------------------------- 1 file changed, 172 insertions(+), 172 deletions(-) (limited to 'tests/smtp_ingress.sh') diff --git a/tests/smtp_ingress.sh b/tests/smtp_ingress.sh index 555a8f4..c950f8a 100644 --- a/tests/smtp_ingress.sh +++ b/tests/smtp_ingress.sh @@ -1,172 +1,172 @@ -#!/bin/bash -# Copyright 2015-2016 AT&T Intellectual Property, Inc -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -# What this is: An OpenStack Congress policy test. Sets up and validates policy -# creation and execution for: -# 1) Identifying VMs that have STMP (TCP port 25) open for ingress. -# -# Status: this is a work in progress, under test. -# -# Prequisite: OPFNV installed per JOID or Apex installer -# - OpenStack CLI environment variables setup -# How to use: -# # Create Congress policy and resources that exercise policy -# $ bash smtp_ingress.sh -# # After test, cleanup -# $ bash smtp_ingress-clean.sh - -pass() { - echo "Hooray!" - set +x #echo off - exit 0 -} - -# Use this to trigger fail() at the right places -# if [ "$RESULT" == "Test Failed!" ]; then fail; fi -fail() { - echo "Test Failed!" - set +x #echo off - exit 1 -} - -unclean() { - echo "Unclean environment!" - fail -} - -if [ $# -eq 1 ]; then - if [ $1 == "debug" ]; then - set -x #echo on - fi -fi - -# Find external network if any, and details -function get_external_net () { - echo "Find external network" - LINE=4 - ID=$(openstack network list | awk "NR==$LINE{print \$2}") - while [[ $ID ]] - do - if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi - ((LINE+=1)) - ID=$(openstack network list | awk "NR==$LINE{print \$2}") - done - if [[ $ID ]]; then - EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }") - EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }") - else - echo "External network not found" - echo "Create external network" - neutron net-create public --router:external - EXTERNAL_NETWORK_NAME="public" - echo "Create external subnet" - neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1 - EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }") - fi -} - -echo "Create Congress policy 'test'" -if [[ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]]; then unclean; fi -openstack congress policy create test - -echo "Create smtp_ingress rule in policy 'test'" -openstack congress policy rule create test "smtp_ingress(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(port_id, status='ACTIVE'), neutronv2:security_groups(sg, tenant_id, sgn, sgd), neutronv2:security_group_port_bindings(port_id, sg), neutronv2:security_group_rules(sg, rule_id, tenant_id, remote_group_id, 'ingress', ethertype, 'tcp', port_range_min, port_range_max, remote_ip), lt(port_range_min, 26), gt(port_range_max, 24)" --name smtp_ingress - -echo "Create image cirros1" -image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }") -if [ "$image" == "" ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare -fi - -get_external_net - -echo "Create floating IP for external subnet" -FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") -FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) -# Save ID to pass to cleanup script -echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh - -echo "Create internal network" -if [[ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]]; then unclean; fi -neutron net-create test_internal - -echo "Create internal subnet" -neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 - -echo "Create router" -if [[ $(neutron router-list | awk "/ test_router / { print \$2 }") ]]; then unclean; fi -neutron router-create test_router - -echo "Create router gateway" -neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME - -echo "Add router internal for internal network" -neutron router-interface-add test_router subnet=test_internal - -COUNTER=1 -RESULT="Failed!" -until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do - echo "Get the internal network ID: try" $COUNTER - test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }") - if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi - let COUNTER+=1 - sleep 10 -done -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Create a security group 'smtp_ingress'" -if [[ $(neutron security-group-list | awk "/ smtp_ingress / { print \$2 }") ]]; then unclean; fi -neutron security-group-create smtp_ingress - -echo "Create security group ingress rule for 'smtp_ingress'" -neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=25 --port-range-max=25 smtp_ingress - -echo "Boot cirros1 with smtp_ingress security group" -nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups smtp_ingress cirros1 - -echo "Get cirros1 instance ID" -test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }") - -echo "Wait for cirros1 to go ACTIVE" -COUNTER=5 -RESULT="Test Failed!" -until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do - status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }") - if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi - let COUNTER-=1 - sleep 5 -done -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Associate floating IP to cirros1" -nova floating-ip-associate cirros1 $FLOATING_IP - -echo "Verify cirros1 is in the Congress policy 'test' table 'smtp_ingress'" -COUNTER=5 -RESULT="Test Failed!" -until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do - openstack congress policy row list test smtp_ingress - cirros1_ID=$(openstack congress policy row list test smtp_ingress | awk "/ $test_cirros1_ID / { print \$2 }") - if [ "$cirros1_ID" == "$test_cirros1_ID" ]; then RESULT="Test Success!" - fi - let COUNTER-=1 - sleep 10 -done -echo $RESULT -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -set +x #echo off - -pass +#!/bin/bash +# Copyright 2015-2016 AT&T Intellectual Property, Inc +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +# What this is: An OpenStack Congress policy test. Sets up and validates policy +# creation and execution for: +# 1) Identifying VMs that have STMP (TCP port 25) open for ingress. +# +# Status: this is a work in progress, under test. +# +# Prequisite: OPFNV installed per JOID or Apex installer +# - OpenStack CLI environment variables setup +# How to use: +# # Create Congress policy and resources that exercise policy +# $ bash smtp_ingress.sh +# # After test, cleanup +# $ bash smtp_ingress-clean.sh + +pass() { + echo "Hooray!" + set +x #echo off + exit 0 +} + +# Use this to trigger fail() at the right places +# if [ "$RESULT" == "Test Failed!" ]; then fail; fi +fail() { + echo "Test Failed!" + set +x #echo off + exit 1 +} + +unclean() { + echo "Unclean environment!" + fail +} + +if [ $# -eq 1 ]; then + if [ $1 == "debug" ]; then + set -x #echo on + fi +fi + +# Find external network if any, and details +function get_external_net () { + echo "Find external network" + LINE=4 + ID=$(openstack network list | awk "NR==$LINE{print \$2}") + while [[ $ID ]] + do + if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi + ((LINE+=1)) + ID=$(openstack network list | awk "NR==$LINE{print \$2}") + done + if [[ $ID ]]; then + EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }") + EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }") + else + echo "External network not found" + echo "Create external network" + neutron net-create public --router:external + EXTERNAL_NETWORK_NAME="public" + echo "Create external subnet" + neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1 + EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }") + fi +} + +echo "Create Congress policy 'test'" +if [[ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]]; then unclean; fi +openstack congress policy create test + +echo "Create smtp_ingress rule in policy 'test'" +openstack congress policy rule create test "smtp_ingress(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(port_id, status='ACTIVE'), neutronv2:security_groups(sg, tenant_id, sgn, sgd), neutronv2:security_group_port_bindings(port_id, sg), neutronv2:security_group_rules(sg, rule_id, tenant_id, remote_group_id, 'ingress', ethertype, 'tcp', port_range_min, port_range_max, remote_ip), lt(port_range_min, 26), gt(port_range_max, 24)" --name smtp_ingress + +echo "Create image cirros1" +image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }") +if [ "$image" == "" ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare +fi + +get_external_net + +echo "Create floating IP for external subnet" +FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") +FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) +# Save ID to pass to cleanup script +echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh + +echo "Create internal network" +if [[ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]]; then unclean; fi +neutron net-create test_internal + +echo "Create internal subnet" +neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 + +echo "Create router" +if [[ $(neutron router-list | awk "/ test_router / { print \$2 }") ]]; then unclean; fi +neutron router-create test_router + +echo "Create router gateway" +neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME + +echo "Add router internal for internal network" +neutron router-interface-add test_router subnet=test_internal + +COUNTER=1 +RESULT="Failed!" +until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do + echo "Get the internal network ID: try" $COUNTER + test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }") + if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi + let COUNTER+=1 + sleep 10 +done +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Create a security group 'smtp_ingress'" +if [[ $(neutron security-group-list | awk "/ smtp_ingress / { print \$2 }") ]]; then unclean; fi +neutron security-group-create smtp_ingress + +echo "Create security group ingress rule for 'smtp_ingress'" +neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=25 --port-range-max=25 smtp_ingress + +echo "Boot cirros1 with smtp_ingress security group" +nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups smtp_ingress cirros1 + +echo "Get cirros1 instance ID" +test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }") + +echo "Wait for cirros1 to go ACTIVE" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }") + if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi + let COUNTER-=1 + sleep 5 +done +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Associate floating IP to cirros1" +nova floating-ip-associate cirros1 $FLOATING_IP + +echo "Verify cirros1 is in the Congress policy 'test' table 'smtp_ingress'" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + openstack congress policy row list test smtp_ingress + cirros1_ID=$(openstack congress policy row list test smtp_ingress | awk "/ $test_cirros1_ID / { print \$2 }") + if [ "$cirros1_ID" == "$test_cirros1_ID" ]; then RESULT="Test Success!" + fi + let COUNTER-=1 + sleep 10 +done +echo $RESULT +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +set +x #echo off + +pass -- cgit 1.2.3-korg