From eae00dcc98ed5d2c9fa81f76e6d4008a44f96bf4 Mon Sep 17 00:00:00 2001 From: blsaws Date: Thu, 19 May 2016 16:53:23 -0700 Subject: Update tests and create test runner. JIRA: COPPER-4 Change-Id: Ic83f123a370e307bf946e69f73e1a16ac366fb61 Signed-off-by: blsaws --- tests/dmz.sh | 189 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 189 insertions(+) create mode 100644 tests/dmz.sh (limited to 'tests/dmz.sh') diff --git a/tests/dmz.sh b/tests/dmz.sh new file mode 100644 index 0000000..1b5ff95 --- /dev/null +++ b/tests/dmz.sh @@ -0,0 +1,189 @@ +#!/bin/bash +# Copyright 2015-2016 AT&T Intellectual Property, Inc +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +# What this is: An OpenStack Congress policy test. Sets up and validates policy +# creation and execution for: +# 1) Identifying VMs connected to a DMZ (currently identified through a +# specifically-named security group) +# 2) Identifying VMs connected per (1), which are by policy not allowed to be +# (currently implemented through an image tag intended to identify images +# that are "authorized" i.e. tested and secure, to be DMZ-connected) +# 3) Reactively enforce the dmz placement rule by pausing VMs found to be in +# violation of the policy. +# +# Status: this is a work in progress, under test. +# +# How to use: +# Install Congress test server per https://wiki.opnfv.org/copper/academy +# # Create Congress policy and resources that exercise policy +# $ sh dmz.sh +# After test, cleanup +# $ sh dmz-clean.sh + +pass() { + echo "Hooray!" +} + +# Use this to trigger fail() at the right places +# if [ "$RESULT" == "Test Failed!" ]; then fail; fi +fail() { + echo "Test Failed!" + set +x + exit 1 +} + +unclean() { + echo "Unclean environment!" + fail +} + +if [ $# -eq 1 ]; then + if [ $1 == "debug" ]; then + set -x #echo on + fi +fi + +source /opt/copper/admin-openrc.sh + +echo "Create Congress policy 'test'" +if [[ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]]; then unclean; fi +openstack congress policy create test + +echo "Create dmz_server rule in policy 'test'" +openstack congress policy rule create test "dmz_server(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(id, device_id, status='ACTIVE'), neutronv2:security_group_port_bindings(pid, sg), neutronv2:security_groups(sg,name='dmz')" --name dmz_server + +echo "Create dmz_placement_error rule in policy 'test'" +openstack congress policy rule create test "dmz_placement_error(id) :- nova:servers(id,name,hostId,status,tenant_id,user_id,image), not glancev2:tags(image,'dmz'), dmz_server(id)" --name dmz_placement_error + +echo "Create image cirros1 with non-dmz image" +image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }") +if [ "$image" == "" ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare +fi + +echo "Create image cirros2 with dmz image" +image=$(openstack image list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }") +if [ "$image" == "" ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64-dmz --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare +fi + +echo "Get image ID of cirros dmz image" +IMAGE_ID=$(glance image-list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }") + +echo "Add 'dmz' image tag to the cirros dmz image" +glance --os-image-api-version 2 image-tag-update $IMAGE_ID "dmz" + +echo "Create external network" +if [[ $(neutron net-list | awk "/ test_public / { print \$2 }") ]]; then unclean; fi +neutron net-create test_public --router:external=true + +echo "Create external subnet" +neutron subnet-create --disable-dhcp test_public 192.168.10.0/24 + +echo "Create internal network" +if [[ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]]; then unclean; fi +neutron net-create test_internal + +echo "Create internal subnet" +neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 + +echo "Create router" +if [[ $(neutron router-list | awk "/ test_router / { print \$2 }") ]]; then unclean; fi +neutron router-create test_router + +echo "Create router gateway" +neutron router-gateway-set test_router test_public + +echo "Add router internal for internal network" +neutron router-interface-add test_router subnet=test_internal + +echo "Wait up to a minute for as 'neutron router-interface-add' blocks the neutron-api for some time..." +# add a delay since the previous command takes the neutron-api offline for a while (?) +COUNTER=1 +RESULT="Failed!" +until [[ $COUNTER -gt 6 || $RESULT == "Success!" ]]; do + echo "Get the internal network ID: try" $COUNTER + test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }") + if [ "$test_internal_NET" != "" ]; then RESULT="c0546c94-436e-4624-aa1a-4393e2981c15Success!" + fi + let COUNTER+=1 + sleep 10 +done + +echo "Create a security group 'dmz'" +if [[ $(neutron security-group-list | awk "/ dmz / { print \$2 }") ]]; then unclean; fi +neutron security-group-create dmz + +echo "Create security group ingress rule for 'dmz'" +neutron security-group-rule-create --direction ingress dmz + +echo "Boot cirros1 with non-dmz image" +nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups dmz cirros1 + +echo "Boot cirros2 with non-dmz image" +nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64-dmz --nic net-id=$test_internal_NET --security-groups dmz cirros2 + +echo "Wait 5 seconds for Congress polling to occur at least once" +sleep 5 + +echo "Get cirros1 instance ID" +test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }") + +echo "Get cirros2 instance ID" +test_cirros2_ID=$(openstack server list | awk "/ cirros2 / { print \$2 }") + +echo "Verify cirros1 and cirros2 IDs are in the Congress policy 'test' table 'dmz_server'" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + dmz_cirros1=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros1_ID / { print \$2 }") + dmz_cirros2=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros2_ID / { print \$2 }") + if [ "$dmz_cirros1" == "$test_cirros1_ID" ] && [ "$dmz_cirros2" == "$test_cirros2_ID" ]; then RESULT="Test Success!" + fi + let COUNTER-=1 + sleep 5 +done +echo "dmz_server table entries present for cirros1, cirros2:" $RESULT +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Verify cirros1 ID is in the Congress policy 'test' table 'dmz_placement_error'" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + dmz_cirros1=$(openstack congress policy row list test dmz_placement_error | awk "/ $test_cirros1_ID / { print \$2 }") + if [ "$dmz_cirros1" == "$test_cirros1_ID" ]; then RESULT="Test Success!" + fi + let COUNTER-=1 + sleep 5 +done +echo "dmz_placement_error table entry present for cirros2:" $RESULT +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Create reactive 'paused_dmz_placement_error' rule in policy 'test'" +openstack congress policy rule create test "execute[nova:servers.pause(id)] :- dmz_placement_error(id), nova:servers(id,status='ACTIVE')" --name paused_dmz_placement_error + +echo "Verify cirros1 is paused" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + cirros1_status=$(nova list | awk "/ cirros1 / { print \$6 }") + if [ "$cirros1_status" == "PAUSED" ]; then RESULT="Test Success!" + fi + let COUNTER-=1 + sleep 5 +done +echo "Verify cirros1 is paused:" $RESULT +if [ "$RESULT" == "Test Failed!" ]; then fail; fi +pass +set +x #echo off -- cgit 1.2.3-korg