From b065ccf2062ec2f38f059e133d0b8b47905f7d0a Mon Sep 17 00:00:00 2001 From: SULLIVAN Date: Tue, 2 Feb 2016 09:52:43 -0800 Subject: Fix more whitespace etc... JIRA: COPPER-1 Change-Id: I1edfdbc55d4d3fd0c43cddba45e26eb515728cca Signed-off-by: SULLIVAN --- docs/configguide/featureconfig.rst | 118 ++++++++++++++++++------------------- docs/configguide/postinstall.rst | 40 ++++++------- docs/design/usecases.rst | 2 +- 3 files changed, 80 insertions(+), 80 deletions(-) diff --git a/docs/configguide/featureconfig.rst b/docs/configguide/featureconfig.rst index 618cc7c..99bafd5 100644 --- a/docs/configguide/featureconfig.rst +++ b/docs/configguide/featureconfig.rst @@ -1,10 +1,10 @@ Copper configuration ==================== This release focused on use of the OpenStack Congress service for managing -configuration policy. The Congress install procedure described here is largely -manual. This procedure, as well as the longer-term goal of automated installer -support, is a work in progress. The procedure is further specific to one OPNFV -installer (JOID, i.e. MAAS/JuJu) based environment. Support for other OPNFV +configuration policy. The Congress install procedure described here is largely +manual. This procedure, as well as the longer-term goal of automated installer +support, is a work in progress. The procedure is further specific to one OPNFV +installer (JOID, i.e. MAAS/JuJu) based environment. Support for other OPNFV installer deployed environments is also a work in progress. Pre-configuration activities @@ -17,10 +17,10 @@ There is no specific hardware configuration required for the Copper project. Feature configuration --------------------- -Following are instructions for installing Congress on an Ubuntu 14.04 LXC -container in the OPNFV Controller node, as installed by the JOID installer. -This guide uses instructions from the `Congress intro guide on readthedocs `_. -Specific values below will need to be modified if you intend to repeat this +Following are instructions for installing Congress on an Ubuntu 14.04 LXC +container in the OPNFV Controller node, as installed by the JOID installer. +This guide uses instructions from the `Congress intro guide on readthedocs `_. +Specific values below will need to be modified if you intend to repeat this procedure in your JOID-based install environment. Install base VM for congress on controller node @@ -106,7 +106,7 @@ Install other dependencies # when prompted, set and remember mysql root user password sudo apt-get install git gcc python-dev libxml2 libxslt1-dev libzip-dev \ - mysql-server python-mysqldb -y + mysql-server python-mysqldb -y sudo pip install virtualenv Clone congress @@ -117,7 +117,7 @@ Clone congress git clone https://github.com/openstack/congress.git cd congress git checkout stable/liberty - + Create virtualenv ................. @@ -177,36 +177,36 @@ Edit congress.conf.sample as needed .. code:: sed -i -- 's/#verbose = true/verbose = true/g' etc/congress.conf.sample - sed -i -- 's/#log_file = /log_file = congress.log/g' \ - etc/congress.conf.sample - sed -i -- 's/#log_dir = /log_dir = \/var\/log\/congress/g' \ - etc/congress.conf.sample - sed -i -- 's/#bind_host = 0.0.0.0/bind_host = 192.168.10.117/g' \ - etc/congress.conf.sample - sed -i -- 's/#policy_path = /policy_path = \ - \/etc\/congress\/snapshot/g' etc/congress.conf.sample - sed -i -- 's/#auth_strategy = keystone/auth_strategy = noauth/g' \ - etc/congress.conf.sample + sed -i -- 's/#log_file = /log_file = congress.log/g' \ + etc/congress.conf.sample + sed -i -- 's/#log_dir = /log_dir = \/var\/log\/congress/g' \ + etc/congress.conf.sample + sed -i -- 's/#bind_host = 0.0.0.0/bind_host = 192.168.10.117/g' \ + etc/congress.conf.sample + sed -i -- 's/#policy_path = /policy_path = \ + \/etc\/congress\/snapshot/g' etc/congress.conf.sample + sed -i -- 's/#auth_strategy = keystone/auth_strategy = noauth/g' \ + etc/congress.conf.sample sed -i -- 's/#drivers =/drivers =\ - congress.datasources.neutronv2_driver.NeutronV2Driver,\ + congress.datasources.neutronv2_driver.NeutronV2Driver,\ congress.datasources.glancev2_driver.GlanceV2Driver,\ congress.datasources.nova_driver.NovaDriver,\ - congress.datasources.keystone_driver.KeystoneDriver,\ - congress.datasources.ceilometer_driver.CeilometerDriver,\ - congress.datasources.cinder_driver.CinderDriver/g' etc/congress.conf.sample - sed -i -- 's/#auth_host = 127.0.0.1/auth_host = 192.168.10.108/g' \ - etc/congress.conf.sample + congress.datasources.keystone_driver.KeystoneDriver,\ + congress.datasources.ceilometer_driver.CeilometerDriver,\ + congress.datasources.cinder_driver.CinderDriver/g' etc/congress.conf.sample + sed -i -- 's/#auth_host = 127.0.0.1/auth_host = 192.168.10.108/g' \ + etc/congress.conf.sample sed -i -- 's/#auth_port = 35357/auth_port = 35357/g' etc/congress.conf.sample - sed -i -- 's/#auth_protocol = https/auth_protocol = http/g' \ - etc/congress.conf.sample - sed -i -- 's/#admin_tenant_name = admin/admin_tenant_name = admin/g' \ - etc/congress.conf.sample - sed -i -- 's/#admin_user = /admin_user = congress/g' \ - etc/congress.conf.sample - sed -i -- 's/#admin_password = /admin_password = congress/g' \ - etc/congress.conf.sample + sed -i -- 's/#auth_protocol = https/auth_protocol = http/g' \ + etc/congress.conf.sample + sed -i -- 's/#admin_tenant_name = admin/admin_tenant_name = admin/g' \ + etc/congress.conf.sample + sed -i -- 's/#admin_user = /admin_user = congress/g' \ + etc/congress.conf.sample + sed -i -- 's/#admin_password = /admin_password = congress/g' \ + etc/congress.conf.sample sed -i -- 's/#connection = /connection = mysql:\/\/ubuntu:\ - @localhost:3306\/congress/g' etc/congress.conf.sample + @localhost:3306\/congress/g' etc/congress.conf.sample Copy congress.conf.sample to /etc/congress .......................................... @@ -222,10 +222,10 @@ Create congress database sudo mysql -u root -p CREATE DATABASE congress; - GRANT ALL PRIVILEGES ON congress.* TO 'ubuntu'@'localhost' \ - IDENTIFIED BY ''; - GRANT ALL PRIVILEGES ON congress.* TO 'ubuntu'@'%' IDENTIFIED \ - BY ''; + GRANT ALL PRIVILEGES ON congress.* TO 'ubuntu'@'localhost' \ + IDENTIFIED BY ''; + GRANT ALL PRIVILEGES ON congress.* TO 'ubuntu'@'%' IDENTIFIED \ + BY ''; exit Install congress-db-manage dependencies @@ -269,26 +269,26 @@ TODO: needs update in `Congress intro in readthedocs < http://congress.readthedo .. code:: pip install cliff --upgrade - export ADMIN_ROLE=$(openstack role list | \ - awk "/ Admin / { print \$2 }") - export SERVICE_TENANT=$(openstack project list | \ - awk "/ admin / { print \$2 }") - openstack user create --password congress --project admin \ - --email "congress@example.com" congress - export CONGRESS_USER=$(openstack user list | \ - awk "/ congress / { print \$2 }") - openstack role add $ADMIN_ROLE --user $CONGRESS_USER \ - --project $SERVICE_TENANT + export ADMIN_ROLE=$(openstack role list | \ + awk "/ Admin / { print \$2 }") + export SERVICE_TENANT=$(openstack project list | \ + awk "/ admin / { print \$2 }") + openstack user create --password congress --project admin \ + --email "congress@example.com" congress + export CONGRESS_USER=$(openstack user list | \ + awk "/ congress / { print \$2 }") + openstack role add $ADMIN_ROLE --user $CONGRESS_USER \ + --project $SERVICE_TENANT Create Congress service ....................... .. code:: - openstack service create congress --type "policy" \ - --description "Congress Service" - export CONGRESS_SERVICE=$(openstack service list | \ - awk "/ congress / { print \$2 }") + openstack service create congress --type "policy" \ + --description "Congress Service" + export CONGRESS_SERVICE=$(openstack service list | \ + awk "/ congress / { print \$2 }") Create Congress endpoint ........................ @@ -315,8 +315,8 @@ Create data sources To remove datasources: openstack congress datasource delete -It's probably good to do these commands in a new terminal tab, as the -congress server log from the last command will be flooding your original +It's probably good to do these commands in a new terminal tab, as the +congress server log from the last command will be flooding your original terminal screen. .. code:: @@ -350,7 +350,7 @@ terminal screen. --config username=$OS_USERNAME \ --config tenant_name=$OS_TENANT_NAME \ --config password=$OS_PASSWORD \ - --config auth_url=http://$KEYSTONE_HOST:5000/v2.0 + --config auth_url=http://$KEYSTONE_HOST:5000/v2.0 Run Congress Tempest Tests .......................... @@ -377,11 +377,11 @@ service running again. sudo lxc-start -n juju-trusty-congress -d # Verify the Congress container status sudo lxc-ls -f juju-trusty-congress - NAME STATE IPV4 IPV6 GROUPS AUTOSTART + NAME STATE IPV4 IPV6 GROUPS AUTOSTART ---------------------------------------------------------------------- - juju-trusty-congress RUNNING 192.168.10.117 - - NO + juju-trusty-congress RUNNING 192.168.10.117 - - NO # exit back to the Jumphost, wait a minute, and go back to the \ - "SSH to Congress server" step above + "SSH to Congress server" step above # On the Congress server that you have logged into source ~/admin-openrc.sh cd congress diff --git a/docs/configguide/postinstall.rst b/docs/configguide/postinstall.rst index 38216d3..4fd8148 100644 --- a/docs/configguide/postinstall.rst +++ b/docs/configguide/postinstall.rst @@ -1,11 +1,11 @@ Copper post installation procedures =================================== This release focused on use of the OpenStack Congress service for managing -configuration policy. The Congress install verify procedure described here -is largely manual. This procedure, as well as the longer-term goal of -automated verification support, is a work in progress. The procedure is -further specific to one OPNFV installer (JOID, i.e. MAAS/JuJu) based -environment. +configuration policy. The Congress install verify procedure described here +is largely manual. This procedure, as well as the longer-term goal of +automated verification support, is a work in progress. The procedure is +further specific to one OPNFV installer (JOID, i.e. MAAS/JuJu) based +environment. Automated post installation activities -------------------------------------- @@ -18,7 +18,7 @@ No configuration procedures are required beyond the basic install procedure. Platform components validation ------------------------------ -Following are notes on creating a container as test driver for Congress. +Following are notes on creating a container as test driver for Congress. This is based upon an Ubuntu host as installed by JOID. Create and Activate the Container @@ -27,11 +27,11 @@ On the jumphost: .. code:: - sudo lxc-create -n trusty-copper -t /usr/share/lxc/templates/lxc-ubuntu \ - -- -b ubuntu ~/opnfv + sudo lxc-create -n trusty-copper -t /usr/share/lxc/templates/lxc-ubuntu \ + -- -b ubuntu ~/opnfv sudo lxc-start -n trusty-copper -d sudo lxc-info --name trusty-copper - (typical output) + (typical output) Name: trusty-copper State: RUNNING PID: 4563 @@ -61,8 +61,8 @@ Login and configure the test server sudo apt-get install default-jre -y # Install other dependencies - sudo apt-get install git gcc python-dev libxml2 libxslt1-dev \ - libzip-dev php5-curl -y + sudo apt-get install git gcc python-dev libxml2 libxslt1-dev \ + libzip-dev php5-curl -y # Setup OpenStack environment variables per your OPNFV install export CONGRESS_HOST=192.168.10.117 @@ -84,7 +84,7 @@ Login and configure the test server sudo pip install -r requirements.txt sudo python setup.py install openstack service list - (typical output) + (typical output) +----------------------------------+------------+----------------+ | ID | Name | Type | +----------------------------------+------------+----------------+ @@ -108,7 +108,7 @@ Login and configure the test server sudo pip install -r requirements.txt sudo python setup.py install openstack congress driver list - (typical output) + (typical output) +------------+--------------------------------------------------------------------------+ | id | description | +------------+--------------------------------------------------------------------------+ @@ -128,7 +128,7 @@ Login and configure the test server sudo pip install -r requirements.txt sudo python setup.py install glance image-list - (typical output) + (typical output) +--------------------------------------+---------------------+ | ID | Name | +--------------------------------------+---------------------+ @@ -143,7 +143,7 @@ Login and configure the test server sudo pip install -r requirements.txt sudo python setup.py install neutron net-list - (typical output) + (typical output) +--------------------------------------+----------+------------------------------------------------------+ | id | name | subnets | +--------------------------------------+----------+------------------------------------------------------+ @@ -159,7 +159,7 @@ Login and configure the test server sudo pip install -r requirements.txt sudo python setup.py install nova hypervisor-list - (typical output) + (typical output) +----+---------------------+-------+---------+ | ID | Hypervisor hostname | State | Status | +----+---------------------+-------+---------+ @@ -181,12 +181,12 @@ Setup the Congress Test Webapp # Clone Copper (if not already cloned in user home) cd ~/git - if [ ! -d ~/git/copper ]; then \ - git clone https://gerrit.opnfv.org/gerrit/copper; fi + if [ ! -d ~/git/copper ]; then \ + git clone https://gerrit.opnfv.org/gerrit/copper; fi # Copy the Apache config sudo cp ~/git/copper/components/congress/test-webapp/www/ubuntu-apache2.conf \ - /etc/apache2/apache2.conf + /etc/apache2/apache2.conf # Point proxy.php to the Congress server per your install sed -i -- "s/192.168.10.117/$CONGRESS_HOST/g" \ @@ -207,4 +207,4 @@ Using the Test Webapp ..................... Browse to the trusty-copper server IP address. -Interactive options are meant to be self-explanatory given a basic familiarity with the Congress service and data model. But the app will be developed with additional features and UI elements. +Interactive options are meant to be self-explanatory given a basic familiarity with the Congress service and data model. But the app will be developed with additional features and UI elements. diff --git a/docs/design/usecases.rst b/docs/design/usecases.rst index 91b616c..e37aa17 100644 --- a/docs/design/usecases.rst +++ b/docs/design/usecases.rst @@ -122,7 +122,7 @@ As implemented through OpenStack Congress: nova:owner(vm, vm-own), neutron:owner(network, net-own), -same-group(vm-own, net-own) - + same-group(user1, user2) :- ldap:group(user1, g), ldap:group(user2, g) -- cgit 1.2.3-korg