From 14a6db40ccf9ff160dc9ed2b3ffe0d3729e528c9 Mon Sep 17 00:00:00 2001 From: blsaws Date: Tue, 2 Aug 2016 12:23:12 -0700 Subject: Fix variation in openstack cient output for network show JIRA: COPPER-4 Change-Id: Ib7aee663b3d402478454c39dd48a4c803815e544 Signed-off-by: blsaws --- tests/adhoc/smoke01.sh | 352 ++++++++++++++++++------------------ tests/dmz.sh | 472 ++++++++++++++++++++++++------------------------- tests/smtp_ingress.sh | 344 +++++++++++++++++------------------ 3 files changed, 584 insertions(+), 584 deletions(-) diff --git a/tests/adhoc/smoke01.sh b/tests/adhoc/smoke01.sh index 5c264f4..bf330d1 100644 --- a/tests/adhoc/smoke01.sh +++ b/tests/adhoc/smoke01.sh @@ -1,176 +1,176 @@ -#!/bin/bash -# Copyright 2015-2016 AT&T Intellectual Property, Inc -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# What this is: A basic test to validate an OPNFV install. Creates an image, -# test_public and private networks, a router, and launches two VMs connected to the -# private network and thru the router, to the internet. -# -# Status: this is a work in progress, under test. Automated ping test to the -# internet and between VMs has not yet been implemented. -# -# How to use: -# Install Congress test server per https://wiki.opnfv.org/copper/academy -# $ bash ~/git/copper/tests/adhoc/smoke01.sh -# After test, cleanup with -# $ bash ~/git/copper/tests/adhoc/smoke01-clean.sh - -pass() { - echo "Hooray!" - set +x #echo off - exit 0 -} - -# Use this to trigger fail() at the right places -# if [ "$RESULT" == "Test Failed!" ]; then fail; fi -fail() { - echo "Test Failed!" - set +x - exit 1 -} - -unclean() { - echo "Unclean environment!" - fail -} - -if [ $# -eq 1 ]; then - if [ $1 == "debug" ]; then - set -x #echo on - fi -fi - -# Find external network if any, and details -function get_external_net () { - echo "Find external network" - LINE=4 - ID=$(openstack network list | awk "NR==$LINE{print \$2}") - while [[ $ID ]] - do - if [[ $(openstack network show $ID | awk "/ router:external / { print \$4 }") == "External" ]]; then break; fi - ((LINE+=1)) - ID=$(openstack network list | awk "NR==$LINE{print \$2}") - done - if [[ $ID ]]; then - EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }") - EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }") - else - echo "External network not found" - echo "Create external network" - neutron net-create public --router:external - EXTERNAL_NETWORK_NAME="public" - echo "Create external subnet" - neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1 - EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }") - fi -} - -wget https://git.opnfv.org/cgit/copper/plain/components/congress/install/bash/setenv.sh -O ~/setenv.sh -source ~/setenv.sh - -echo "Create cirros-0.3.3-x86_64 image" -image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }") -if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare -fi - -get_external_net - -echo "Create floating IP for external subnet" -FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") -FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) -# Save ID to pass to cleanup script -echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh - -echo "Create internal network" -neutron net-create internal - -echo "Create internal subnet" -neutron subnet-create internal 10.0.0.0/24 --name internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 - -echo "Create router" -neutron router-create public_router - -echo "Create router gateway" -neutron router-gateway-set public_router $EXTERNAL_NETWORK_NAME - -echo "Add router interface for internal network" -neutron router-interface-add public_router subnet=internal - -echo "Wait up to a minute as 'neutron router-interface-add' blocks the neutron-api for some time..." -COUNTER=1 -RESULT="Failed!" -until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do - echo "Get the internal network ID: try" $COUNTER - internal_NET=$(neutron net-list | awk "/ internal / { print \$2 }") - if [ "$internal_NET" != "" ]; then RESULT="Success!"; fi - let COUNTER+=1 - sleep 10 -done -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Create smoke01 security group" -neutron security-group-create smoke01 - -echo "Add rule to smoke01 security group" -neutron security-group-rule-create --direction ingress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 smoke01 -neutron security-group-rule-create --direction ingress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 smoke01 -neutron security-group-rule-create --direction egress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 smoke01 -neutron security-group-rule-create --direction egress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 smoke01 - -echo "Create Nova key pair" -ssh-keygen -f "$HOME/.ssh/known_hosts" -R 192.168.10.6 -nova keypair-add smoke01 > /tmp/smoke01 -chmod 600 /tmp/smoke01 - -echo "Boot cirros1" -nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$internal_NET --security-groups smoke01 --key-name smoke01 cirros1 - -echo "Get cirros1 instance ID" -test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }") - -echo "Wait for cirros1 to go ACTIVE" -COUNTER=5 -RESULT="Test Failed!" -until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do - status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }") - if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi - let COUNTER-=1 - sleep 5 -done -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Associate floating IP to cirros1" -nova floating-ip-associate cirros1 $FLOATING_IP - -echo "Boot cirros2" -nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$internal_NET --security-groups smoke01 cirros2 - -COUNTER=1 -RESULT="Failed!" -until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do - echo "Verify internal network connectivity" - RESULT=$(ssh -i /tmp/smoke01 -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no cirros@$FLOATING_IP "ping -c 3 10.0.0.4; exit" | awk "/ 0% packet loss/ { print \$1 }") - if [ "$RESULT" == "3" ]; then RESULT="Success!"; fi - let COUNTER+=1 - sleep 10 -done -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Verify public network connectivity" -RESULT=$(ssh -i /tmp/smoke01 -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no cirros@$FLOATING_IP "ping -c 3 8.8.8.8; exit" | awk "/ 0% packet loss/ { print \$1 }") -if [ "$RESULT" != "3" ]; then fail; fi - -set +x #echo off - -pass +#!/bin/bash +# Copyright 2015-2016 AT&T Intellectual Property, Inc +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# +# What this is: A basic test to validate an OPNFV install. Creates an image, +# test_public and private networks, a router, and launches two VMs connected to the +# private network and thru the router, to the internet. +# +# Status: this is a work in progress, under test. Automated ping test to the +# internet and between VMs has not yet been implemented. +# +# How to use: +# Install Congress test server per https://wiki.opnfv.org/copper/academy +# $ bash ~/git/copper/tests/adhoc/smoke01.sh +# After test, cleanup with +# $ bash ~/git/copper/tests/adhoc/smoke01-clean.sh + +pass() { + echo "Hooray!" + set +x #echo off + exit 0 +} + +# Use this to trigger fail() at the right places +# if [ "$RESULT" == "Test Failed!" ]; then fail; fi +fail() { + echo "Test Failed!" + set +x + exit 1 +} + +unclean() { + echo "Unclean environment!" + fail +} + +if [ $# -eq 1 ]; then + if [ $1 == "debug" ]; then + set -x #echo on + fi +fi + +# Find external network if any, and details +function get_external_net () { + echo "Find external network" + LINE=4 + ID=$(openstack network list | awk "NR==$LINE{print \$2}") + while [[ $ID ]] + do + if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi + ((LINE+=1)) + ID=$(openstack network list | awk "NR==$LINE{print \$2}") + done + if [[ $ID ]]; then + EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }") + EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }") + else + echo "External network not found" + echo "Create external network" + neutron net-create public --router:external + EXTERNAL_NETWORK_NAME="public" + echo "Create external subnet" + neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1 + EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }") + fi +} + +wget https://git.opnfv.org/cgit/copper/plain/components/congress/install/bash/setenv.sh -O ~/setenv.sh +source ~/setenv.sh + +echo "Create cirros-0.3.3-x86_64 image" +image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }") +if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare +fi + +get_external_net + +echo "Create floating IP for external subnet" +FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") +FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) +# Save ID to pass to cleanup script +echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh + +echo "Create internal network" +neutron net-create internal + +echo "Create internal subnet" +neutron subnet-create internal 10.0.0.0/24 --name internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 + +echo "Create router" +neutron router-create public_router + +echo "Create router gateway" +neutron router-gateway-set public_router $EXTERNAL_NETWORK_NAME + +echo "Add router interface for internal network" +neutron router-interface-add public_router subnet=internal + +echo "Wait up to a minute as 'neutron router-interface-add' blocks the neutron-api for some time..." +COUNTER=1 +RESULT="Failed!" +until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do + echo "Get the internal network ID: try" $COUNTER + internal_NET=$(neutron net-list | awk "/ internal / { print \$2 }") + if [ "$internal_NET" != "" ]; then RESULT="Success!"; fi + let COUNTER+=1 + sleep 10 +done +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Create smoke01 security group" +neutron security-group-create smoke01 + +echo "Add rule to smoke01 security group" +neutron security-group-rule-create --direction ingress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 smoke01 +neutron security-group-rule-create --direction ingress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 smoke01 +neutron security-group-rule-create --direction egress --protocol=TCP --remote-ip-prefix 0.0.0.0/0 --port-range-min=22 --port-range-max=22 smoke01 +neutron security-group-rule-create --direction egress --protocol=ICMP --remote-ip-prefix 0.0.0.0/0 smoke01 + +echo "Create Nova key pair" +ssh-keygen -f "$HOME/.ssh/known_hosts" -R 192.168.10.6 +nova keypair-add smoke01 > /tmp/smoke01 +chmod 600 /tmp/smoke01 + +echo "Boot cirros1" +nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$internal_NET --security-groups smoke01 --key-name smoke01 cirros1 + +echo "Get cirros1 instance ID" +test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }") + +echo "Wait for cirros1 to go ACTIVE" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }") + if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi + let COUNTER-=1 + sleep 5 +done +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Associate floating IP to cirros1" +nova floating-ip-associate cirros1 $FLOATING_IP + +echo "Boot cirros2" +nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$internal_NET --security-groups smoke01 cirros2 + +COUNTER=1 +RESULT="Failed!" +until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do + echo "Verify internal network connectivity" + RESULT=$(ssh -i /tmp/smoke01 -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no cirros@$FLOATING_IP "ping -c 3 10.0.0.4; exit" | awk "/ 0% packet loss/ { print \$1 }") + if [ "$RESULT" == "3" ]; then RESULT="Success!"; fi + let COUNTER+=1 + sleep 10 +done +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Verify public network connectivity" +RESULT=$(ssh -i /tmp/smoke01 -x -o UserKnownHostsFile=/dev/null -o StrictHostKeyChecking=no cirros@$FLOATING_IP "ping -c 3 8.8.8.8; exit" | awk "/ 0% packet loss/ { print \$1 }") +if [ "$RESULT" != "3" ]; then fail; fi + +set +x #echo off + +pass diff --git a/tests/dmz.sh b/tests/dmz.sh index 191d6d3..326e04e 100644 --- a/tests/dmz.sh +++ b/tests/dmz.sh @@ -1,236 +1,236 @@ -#!/bin/bash -# Copyright 2015-2016 AT&T Intellectual Property, Inc -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -# What this is: An OpenStack Congress policy test. Sets up and validates policy -# creation and execution for: -# 1) Identifying VMs connected to a DMZ (currently identified through a -# specifically-named security group) -# 2) Identifying VMs connected per (1), which are by policy not allowed to be -# (currently implemented through an image tag intended to identify images -# that are "authorized" i.e. tested and secure, to be DMZ-connected) -# 3) Reactively enforce the dmz placement rule by pausing VMs found to be in -# violation of the policy. -# -# Status: this is a work in progress, under test. -# -# Prequisite: OPFNV installed per JOID or Apex installer -# - OpenStack CLI environment variables setup -# How to use: -# # Create Congress policy and resources that exercise policy -# $ bash dmz.sh -# # After test, cleanup -# $ bash dmz-clean.sh - -pass() { - echo "Hooray!" - set +x #echo off - exit 0 -} - -# Use this to trigger fail() at the right places -# if [ "$RESULT" == "Test Failed!" ]; then fail; fi -fail() { - echo "Test Failed!" - set +x - exit 1 -} - -unclean() { - echo "Unclean environment!" - fail -} - -if [ $# -eq 1 ]; then - if [ $1 == "debug" ]; then - set -x #echo on - fi -fi - -# Find external network if any, and details -function get_external_net () { - echo "Find external network" - LINE=4 - ID=$(openstack network list | awk "NR==$LINE{print \$2}") - while [[ $ID ]] - do - if [[ $(openstack network show $ID | awk "/ router:external / { print \$4 }") == "External" ]]; then break; fi - ((LINE+=1)) - ID=$(openstack network list | awk "NR==$LINE{print \$2}") - done - if [[ $ID ]]; then - EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }") - EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }") - else - echo "External network not found" - echo "Create external network" - neutron net-create public --router:external - EXTERNAL_NETWORK_NAME="public" - echo "Create external subnet" - neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1 - EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }") - fi -} - -echo "Create Congress policy 'test'" -if [ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]; then unclean; fi -openstack congress policy create test - -echo "Create dmz_server rule in policy 'test'" -openstack congress policy rule create test "dmz_server(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(id, device_id, status='ACTIVE'), neutronv2:security_group_port_bindings(id, sg), neutronv2:security_groups(sg,name='dmz')" --name dmz_server - -echo "Create dmz_placement_error rule in policy 'test'" -openstack congress policy rule create test "dmz_placement_error(id) :- nova:servers(id,name,hostId,status,tenant_id,user_id,image,flavor,az,hh), not glancev2:tags(image,'dmz'), dmz_server(id)" --name dmz_placement_error - -echo "Create image cirros1 with non-dmz image" -image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }") -if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare -fi - -echo "Create image cirros2 with dmz image" -image=$(openstack image list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }") -if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64-dmz --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare -fi - -echo "Get image ID of cirros dmz image" -IMAGE_ID=$(glance image-list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }") - -echo "Add 'dmz' image tag to the cirros dmz image" -glance --os-image-api-version 2 image-tag-update $IMAGE_ID "dmz" - -get_external_net - -echo "Create floating IP for external subnet" -FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") -FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) -# Save ID to pass to cleanup script -echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh - -echo "Create internal network" -if [ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]; then unclean; fi -neutron net-create test_internal - -echo "Create internal subnet" -neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 - -echo "Create router" -if [ $(neutron router-list | awk "/ test_router / { print \$2 }") ]; then unclean; fi -neutron router-create test_router - -echo "Create router gateway" -neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME - -echo "Add router internal for internal network" -neutron router-interface-add test_router subnet=test_internal - -COUNTER=1 -RESULT="Failed!" -until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do - echo "Get the internal network ID: try" $COUNTER - test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }") - if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi - let COUNTER+=1 - sleep 10 -done -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Create a security group 'dmz'" -if [ $(neutron security-group-list | awk "/ dmz / { print \$2 }") ]; then unclean; fi -neutron security-group-create dmz -if [ -z $(neutron security-group-list | awk "/ dmz / { print \$2 }") ]; then - echo "Unable to create security group" - fail -fi - -echo "Create security group ingress rule for 'dmz'" -neutron security-group-rule-create --direction ingress dmz - -echo "Boot cirros1 with non-dmz image" -nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups dmz cirros1 - -echo "Get cirros1 instance ID" -test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }") - -echo "Wait for cirros1 to go ACTIVE" -COUNTER=5 -RESULT="Test Failed!" -until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do - status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }") - if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi - let COUNTER-=1 - sleep 5 -done -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Associate floating IP to cirros1" -nova floating-ip-associate cirros1 $FLOATING_IP - -echo "Boot cirros2 with dmz image" -nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64-dmz --nic net-id=$test_internal_NET --security-groups dmz cirros2 -test_cirros2_ID=$(nova list | awk "/ cirros2 / { print \$2 }") -if [ -z $test_cirros1_ID ]; then - echo "Unable to boot cirros2" - fail -fi - -echo "Wait 5 seconds for Congress polling to occur at least once" -sleep 5 - -echo "Verify cirros1 and cirros2 IDs are in the Congress policy 'test' table 'dmz_server'" -COUNTER=5 -RESULT="Test Failed!" -until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do - openstack congress policy row list test dmz_server - dmz_cirros1=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros1_ID / { print \$2 }") - dmz_cirros2=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros2_ID / { print \$2 }") - if [[ "$dmz_cirros1" == "$test_cirros1_ID" && "$dmz_cirros2" == "$test_cirros2_ID" ]]; then RESULT="Test Success!"; fi - let COUNTER-=1 - sleep 5 -done -echo "dmz_server table entries present for cirros1, cirros2:" $RESULT -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Verify cirros1 ID is in the Congress policy 'test' table 'dmz_placement_error'" -COUNTER=5 -RESULT="Test Failed!" -until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do - openstack congress policy row list test dmz_placement_error - dmz_cirros1=$(openstack congress policy row list test dmz_placement_error | awk "/ $test_cirros1_ID / { print \$2 }") - if [ "$dmz_cirros1" == "$test_cirros1_ID" ]; then RESULT="Test Success!"; fi - let COUNTER-=1 - sleep 5 -done -echo "dmz_placement_error table entry present for cirros2:" $RESULT -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Create reactive 'paused_dmz_placement_error' rule in policy 'test'" -openstack congress policy rule create test "execute[nova:servers.pause(id)] :- dmz_placement_error(id), nova:servers(id,status='ACTIVE')" --name paused_dmz_placement_error - -echo "Verify cirros1 is paused" -COUNTER=5 -RESULT="Test Failed!" -until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do - nova list - cirros1_status=$(nova list | awk "/ cirros1 / { print \$6 }") - if [ "$cirros1_status" == "PAUSED" ]; then RESULT="Test Success!"; fi - let COUNTER-=1 - sleep 5 -done -echo "Verify cirros1 is paused:" $RESULT -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -set +x #echo off - -pass +#!/bin/bash +# Copyright 2015-2016 AT&T Intellectual Property, Inc +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +# What this is: An OpenStack Congress policy test. Sets up and validates policy +# creation and execution for: +# 1) Identifying VMs connected to a DMZ (currently identified through a +# specifically-named security group) +# 2) Identifying VMs connected per (1), which are by policy not allowed to be +# (currently implemented through an image tag intended to identify images +# that are "authorized" i.e. tested and secure, to be DMZ-connected) +# 3) Reactively enforce the dmz placement rule by pausing VMs found to be in +# violation of the policy. +# +# Status: this is a work in progress, under test. +# +# Prequisite: OPFNV installed per JOID or Apex installer +# - OpenStack CLI environment variables setup +# How to use: +# # Create Congress policy and resources that exercise policy +# $ bash dmz.sh +# # After test, cleanup +# $ bash dmz-clean.sh + +pass() { + echo "Hooray!" + set +x #echo off + exit 0 +} + +# Use this to trigger fail() at the right places +# if [ "$RESULT" == "Test Failed!" ]; then fail; fi +fail() { + echo "Test Failed!" + set +x + exit 1 +} + +unclean() { + echo "Unclean environment!" + fail +} + +if [ $# -eq 1 ]; then + if [ $1 == "debug" ]; then + set -x #echo on + fi +fi + +# Find external network if any, and details +function get_external_net () { + echo "Find external network" + LINE=4 + ID=$(openstack network list | awk "NR==$LINE{print \$2}") + while [[ $ID ]] + do + if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi + ((LINE+=1)) + ID=$(openstack network list | awk "NR==$LINE{print \$2}") + done + if [[ $ID ]]; then + EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }") + EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }") + else + echo "External network not found" + echo "Create external network" + neutron net-create public --router:external + EXTERNAL_NETWORK_NAME="public" + echo "Create external subnet" + neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1 + EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }") + fi +} + +echo "Create Congress policy 'test'" +if [ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]; then unclean; fi +openstack congress policy create test + +echo "Create dmz_server rule in policy 'test'" +openstack congress policy rule create test "dmz_server(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(id, device_id, status='ACTIVE'), neutronv2:security_group_port_bindings(id, sg), neutronv2:security_groups(sg,name='dmz')" --name dmz_server + +echo "Create dmz_placement_error rule in policy 'test'" +openstack congress policy rule create test "dmz_placement_error(id) :- nova:servers(id,name,hostId,status,tenant_id,user_id,image,flavor,az,hh), not glancev2:tags(image,'dmz'), dmz_server(id)" --name dmz_placement_error + +echo "Create image cirros1 with non-dmz image" +image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }") +if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare +fi + +echo "Create image cirros2 with dmz image" +image=$(openstack image list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }") +if [ -z $image ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64-dmz --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare +fi + +echo "Get image ID of cirros dmz image" +IMAGE_ID=$(glance image-list | awk "/ cirros-0.3.3-x86_64-dmz / { print \$2 }") + +echo "Add 'dmz' image tag to the cirros dmz image" +glance --os-image-api-version 2 image-tag-update $IMAGE_ID "dmz" + +get_external_net + +echo "Create floating IP for external subnet" +FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") +FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) +# Save ID to pass to cleanup script +echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh + +echo "Create internal network" +if [ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]; then unclean; fi +neutron net-create test_internal + +echo "Create internal subnet" +neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 + +echo "Create router" +if [ $(neutron router-list | awk "/ test_router / { print \$2 }") ]; then unclean; fi +neutron router-create test_router + +echo "Create router gateway" +neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME + +echo "Add router internal for internal network" +neutron router-interface-add test_router subnet=test_internal + +COUNTER=1 +RESULT="Failed!" +until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do + echo "Get the internal network ID: try" $COUNTER + test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }") + if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi + let COUNTER+=1 + sleep 10 +done +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Create a security group 'dmz'" +if [ $(neutron security-group-list | awk "/ dmz / { print \$2 }") ]; then unclean; fi +neutron security-group-create dmz +if [ -z $(neutron security-group-list | awk "/ dmz / { print \$2 }") ]; then + echo "Unable to create security group" + fail +fi + +echo "Create security group ingress rule for 'dmz'" +neutron security-group-rule-create --direction ingress dmz + +echo "Boot cirros1 with non-dmz image" +nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups dmz cirros1 + +echo "Get cirros1 instance ID" +test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }") + +echo "Wait for cirros1 to go ACTIVE" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }") + if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi + let COUNTER-=1 + sleep 5 +done +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Associate floating IP to cirros1" +nova floating-ip-associate cirros1 $FLOATING_IP + +echo "Boot cirros2 with dmz image" +nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64-dmz --nic net-id=$test_internal_NET --security-groups dmz cirros2 +test_cirros2_ID=$(nova list | awk "/ cirros2 / { print \$2 }") +if [ -z $test_cirros1_ID ]; then + echo "Unable to boot cirros2" + fail +fi + +echo "Wait 5 seconds for Congress polling to occur at least once" +sleep 5 + +echo "Verify cirros1 and cirros2 IDs are in the Congress policy 'test' table 'dmz_server'" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + openstack congress policy row list test dmz_server + dmz_cirros1=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros1_ID / { print \$2 }") + dmz_cirros2=$(openstack congress policy row list test dmz_server | awk "/ $test_cirros2_ID / { print \$2 }") + if [[ "$dmz_cirros1" == "$test_cirros1_ID" && "$dmz_cirros2" == "$test_cirros2_ID" ]]; then RESULT="Test Success!"; fi + let COUNTER-=1 + sleep 5 +done +echo "dmz_server table entries present for cirros1, cirros2:" $RESULT +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Verify cirros1 ID is in the Congress policy 'test' table 'dmz_placement_error'" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + openstack congress policy row list test dmz_placement_error + dmz_cirros1=$(openstack congress policy row list test dmz_placement_error | awk "/ $test_cirros1_ID / { print \$2 }") + if [ "$dmz_cirros1" == "$test_cirros1_ID" ]; then RESULT="Test Success!"; fi + let COUNTER-=1 + sleep 5 +done +echo "dmz_placement_error table entry present for cirros2:" $RESULT +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Create reactive 'paused_dmz_placement_error' rule in policy 'test'" +openstack congress policy rule create test "execute[nova:servers.pause(id)] :- dmz_placement_error(id), nova:servers(id,status='ACTIVE')" --name paused_dmz_placement_error + +echo "Verify cirros1 is paused" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + nova list + cirros1_status=$(nova list | awk "/ cirros1 / { print \$6 }") + if [ "$cirros1_status" == "PAUSED" ]; then RESULT="Test Success!"; fi + let COUNTER-=1 + sleep 5 +done +echo "Verify cirros1 is paused:" $RESULT +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +set +x #echo off + +pass diff --git a/tests/smtp_ingress.sh b/tests/smtp_ingress.sh index 5c0e766..555a8f4 100644 --- a/tests/smtp_ingress.sh +++ b/tests/smtp_ingress.sh @@ -1,172 +1,172 @@ -#!/bin/bash -# Copyright 2015-2016 AT&T Intellectual Property, Inc -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# - -# What this is: An OpenStack Congress policy test. Sets up and validates policy -# creation and execution for: -# 1) Identifying VMs that have STMP (TCP port 25) open for ingress. -# -# Status: this is a work in progress, under test. -# -# Prequisite: OPFNV installed per JOID or Apex installer -# - OpenStack CLI environment variables setup -# How to use: -# # Create Congress policy and resources that exercise policy -# $ bash smtp_ingress.sh -# # After test, cleanup -# $ bash smtp_ingress-clean.sh - -pass() { - echo "Hooray!" - set +x #echo off - exit 0 -} - -# Use this to trigger fail() at the right places -# if [ "$RESULT" == "Test Failed!" ]; then fail; fi -fail() { - echo "Test Failed!" - set +x #echo off - exit 1 -} - -unclean() { - echo "Unclean environment!" - fail -} - -if [ $# -eq 1 ]; then - if [ $1 == "debug" ]; then - set -x #echo on - fi -fi - -# Find external network if any, and details -function get_external_net () { - echo "Find external network" - LINE=4 - ID=$(openstack network list | awk "NR==$LINE{print \$2}") - while [[ $ID ]] - do - if [[ $(openstack network show $ID | awk "/ router:external / { print \$4 }") == "External" ]]; then break; fi - ((LINE+=1)) - ID=$(openstack network list | awk "NR==$LINE{print \$2}") - done - if [[ $ID ]]; then - EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }") - EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }") - else - echo "External network not found" - echo "Create external network" - neutron net-create public --router:external - EXTERNAL_NETWORK_NAME="public" - echo "Create external subnet" - neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1 - EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }") - fi -} - -echo "Create Congress policy 'test'" -if [[ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]]; then unclean; fi -openstack congress policy create test - -echo "Create smtp_ingress rule in policy 'test'" -openstack congress policy rule create test "smtp_ingress(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(port_id, status='ACTIVE'), neutronv2:security_groups(sg, tenant_id, sgn, sgd), neutronv2:security_group_port_bindings(port_id, sg), neutronv2:security_group_rules(sg, rule_id, tenant_id, remote_group_id, 'ingress', ethertype, 'tcp', port_range_min, port_range_max, remote_ip), lt(port_range_min, 26), gt(port_range_max, 24)" --name smtp_ingress - -echo "Create image cirros1" -image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }") -if [ "$image" == "" ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare -fi - -get_external_net - -echo "Create floating IP for external subnet" -FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") -FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) -# Save ID to pass to cleanup script -echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh - -echo "Create internal network" -if [[ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]]; then unclean; fi -neutron net-create test_internal - -echo "Create internal subnet" -neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 - -echo "Create router" -if [[ $(neutron router-list | awk "/ test_router / { print \$2 }") ]]; then unclean; fi -neutron router-create test_router - -echo "Create router gateway" -neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME - -echo "Add router internal for internal network" -neutron router-interface-add test_router subnet=test_internal - -COUNTER=1 -RESULT="Failed!" -until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do - echo "Get the internal network ID: try" $COUNTER - test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }") - if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi - let COUNTER+=1 - sleep 10 -done -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Create a security group 'smtp_ingress'" -if [[ $(neutron security-group-list | awk "/ smtp_ingress / { print \$2 }") ]]; then unclean; fi -neutron security-group-create smtp_ingress - -echo "Create security group ingress rule for 'smtp_ingress'" -neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=25 --port-range-max=25 smtp_ingress - -echo "Boot cirros1 with smtp_ingress security group" -nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups smtp_ingress cirros1 - -echo "Get cirros1 instance ID" -test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }") - -echo "Wait for cirros1 to go ACTIVE" -COUNTER=5 -RESULT="Test Failed!" -until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do - status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }") - if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi - let COUNTER-=1 - sleep 5 -done -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -echo "Associate floating IP to cirros1" -nova floating-ip-associate cirros1 $FLOATING_IP - -echo "Verify cirros1 is in the Congress policy 'test' table 'smtp_ingress'" -COUNTER=5 -RESULT="Test Failed!" -until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do - openstack congress policy row list test smtp_ingress - cirros1_ID=$(openstack congress policy row list test smtp_ingress | awk "/ $test_cirros1_ID / { print \$2 }") - if [ "$cirros1_ID" == "$test_cirros1_ID" ]; then RESULT="Test Success!" - fi - let COUNTER-=1 - sleep 10 -done -echo $RESULT -if [ "$RESULT" == "Test Failed!" ]; then fail; fi - -set +x #echo off - -pass +#!/bin/bash +# Copyright 2015-2016 AT&T Intellectual Property, Inc +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +# What this is: An OpenStack Congress policy test. Sets up and validates policy +# creation and execution for: +# 1) Identifying VMs that have STMP (TCP port 25) open for ingress. +# +# Status: this is a work in progress, under test. +# +# Prequisite: OPFNV installed per JOID or Apex installer +# - OpenStack CLI environment variables setup +# How to use: +# # Create Congress policy and resources that exercise policy +# $ bash smtp_ingress.sh +# # After test, cleanup +# $ bash smtp_ingress-clean.sh + +pass() { + echo "Hooray!" + set +x #echo off + exit 0 +} + +# Use this to trigger fail() at the right places +# if [ "$RESULT" == "Test Failed!" ]; then fail; fi +fail() { + echo "Test Failed!" + set +x #echo off + exit 1 +} + +unclean() { + echo "Unclean environment!" + fail +} + +if [ $# -eq 1 ]; then + if [ $1 == "debug" ]; then + set -x #echo on + fi +fi + +# Find external network if any, and details +function get_external_net () { + echo "Find external network" + LINE=4 + ID=$(openstack network list | awk "NR==$LINE{print \$2}") + while [[ $ID ]] + do + if [[ $(openstack network show $ID | awk "/ router/ { print \$4 }") == "External" ]]; then break; fi + ((LINE+=1)) + ID=$(openstack network list | awk "NR==$LINE{print \$2}") + done + if [[ $ID ]]; then + EXTERNAL_NETWORK_NAME=$(openstack network show $ID | awk "/ name / { print \$4 }") + EXTERNAL_SUBNET_ID=$(openstack network show $EXTERNAL_NETWORK_NAME | awk "/ subnets / { print \$4 }") + else + echo "External network not found" + echo "Create external network" + neutron net-create public --router:external + EXTERNAL_NETWORK_NAME="public" + echo "Create external subnet" + neutron subnet-create public 192.168.10.0/24 --name public --enable_dhcp=False --allocation_pool start=192.168.10.6,end=192.168.10.49 --gateway 192.168.10.1 + EXTERNAL_SUBNET_ID=$(openstack subnet show public | awk "/ id / { print \$4 }") + fi +} + +echo "Create Congress policy 'test'" +if [[ $(openstack congress policy show test | awk "/ id / { print \$4 }") ]]; then unclean; fi +openstack congress policy create test + +echo "Create smtp_ingress rule in policy 'test'" +openstack congress policy rule create test "smtp_ingress(x) :- nova:servers(id=x,status='ACTIVE'), neutronv2:ports(port_id, status='ACTIVE'), neutronv2:security_groups(sg, tenant_id, sgn, sgd), neutronv2:security_group_port_bindings(port_id, sg), neutronv2:security_group_rules(sg, rule_id, tenant_id, remote_group_id, 'ingress', ethertype, 'tcp', port_range_min, port_range_max, remote_ip), lt(port_range_min, 26), gt(port_range_max, 24)" --name smtp_ingress + +echo "Create image cirros1" +image=$(openstack image list | awk "/ cirros-0.3.3-x86_64 / { print \$2 }") +if [ "$image" == "" ]; then glance --os-image-api-version 1 image-create --name cirros-0.3.3-x86_64 --disk-format qcow2 --location http://download.cirros-cloud.net/0.3.3/cirros-0.3.3-x86_64-disk.img --container-format bare +fi + +get_external_net + +echo "Create floating IP for external subnet" +FLOATING_IP_ID=$(neutron floatingip-create $EXTERNAL_NETWORK_NAME | awk "/ id / { print \$4 }") +FLOATING_IP=$(neutron floatingip-show $FLOATING_IP_ID | awk "/ floating_ip_address / { print \$4 }" | cut -d - -f 1) +# Save ID to pass to cleanup script +echo "FLOATING_IP_ID=$FLOATING_IP_ID" >/tmp/TEST_VARS.sh + +echo "Create internal network" +if [[ $(neutron net-list | awk "/ test_internal / { print \$2 }") ]]; then unclean; fi +neutron net-create test_internal + +echo "Create internal subnet" +neutron subnet-create test_internal 10.0.0.0/24 --name test_internal --gateway 10.0.0.1 --enable-dhcp --allocation-pool start=10.0.0.2,end=10.0.0.254 --dns-nameserver 8.8.8.8 + +echo "Create router" +if [[ $(neutron router-list | awk "/ test_router / { print \$2 }") ]]; then unclean; fi +neutron router-create test_router + +echo "Create router gateway" +neutron router-gateway-set test_router $EXTERNAL_NETWORK_NAME + +echo "Add router internal for internal network" +neutron router-interface-add test_router subnet=test_internal + +COUNTER=1 +RESULT="Failed!" +until [[ "$COUNTER" -gt 6 || "$RESULT" == "Success!" ]]; do + echo "Get the internal network ID: try" $COUNTER + test_internal_NET=$(neutron net-list | awk "/ test_internal / { print \$2 }") + if [ "$test_internal_NET" != "" ]; then RESULT="Success!"; fi + let COUNTER+=1 + sleep 10 +done +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Create a security group 'smtp_ingress'" +if [[ $(neutron security-group-list | awk "/ smtp_ingress / { print \$2 }") ]]; then unclean; fi +neutron security-group-create smtp_ingress + +echo "Create security group ingress rule for 'smtp_ingress'" +neutron security-group-rule-create --direction ingress --protocol=TCP --port-range-min=25 --port-range-max=25 smtp_ingress + +echo "Boot cirros1 with smtp_ingress security group" +nova boot --flavor m1.tiny --image cirros-0.3.3-x86_64 --nic net-id=$test_internal_NET --security-groups smtp_ingress cirros1 + +echo "Get cirros1 instance ID" +test_cirros1_ID=$(openstack server list | awk "/ cirros1 / { print \$2 }") + +echo "Wait for cirros1 to go ACTIVE" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + status=$(openstack server show $test_cirros1_ID | awk "/ status / { print \$4 }") + if [[ "$status" == "ACTIVE" ]]; then RESULT="Test Success!"; fi + let COUNTER-=1 + sleep 5 +done +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +echo "Associate floating IP to cirros1" +nova floating-ip-associate cirros1 $FLOATING_IP + +echo "Verify cirros1 is in the Congress policy 'test' table 'smtp_ingress'" +COUNTER=5 +RESULT="Test Failed!" +until [[ $COUNTER -eq 0 || $RESULT == "Test Success!" ]]; do + openstack congress policy row list test smtp_ingress + cirros1_ID=$(openstack congress policy row list test smtp_ingress | awk "/ $test_cirros1_ID / { print \$2 }") + if [ "$cirros1_ID" == "$test_cirros1_ID" ]; then RESULT="Test Success!" + fi + let COUNTER-=1 + sleep 10 +done +echo $RESULT +if [ "$RESULT" == "Test Failed!" ]; then fail; fi + +set +x #echo off + +pass -- cgit 1.2.3-korg