#version=DEVEL # System authorization information auth --useshadow --enablemd5 # Install OS instead of upgrade install # License agreement eula --agreed # Use text mode install text # Firewall configuration firewall --disabled firstboot --disable # Keyboard layouts # old format: keyboard us # new format: keyboard --vckeymap=us --xlayouts='us' network --onboot no --device eth0 --bootproto dhcp --noipv6 network --onboot no --device eth1 --bootproto dhcp --noipv6 network --onboot no --device eth2 --bootproto dhcp --noipv6 # System language lang en_US.UTF-8 # Installation logging level logging --level=info # Reboot after installation reboot # Root password rootpw root # SELinux configuration selinux --disabled # System services services --enabled="NetworkManager,sshd" # Do not configure the X Window System skipx # System timezone timezone America/Los_Angeles --isUtc # System bootloader configuration bootloader --append=" crashkernel=auto" --location=mbr --boot-drive=sda # Clear the Master Boot Record zerombr # Partition clearing information clearpart --all --initlabel # Disk partitioning information part swap --asprimary --fstype="swap" --ondisk=sda --size=3072 part /boot --asprimary --fstype="ext3" --ondisk=sda --size=500 part pv.64 --fstype="lvmpv" --ondisk=sda --size=27145 volgroup os --pesize=4096 pv.64 logvol /var --fstype="ext3" --grow --percent=40 --name=varvol --vgname=os logvol /tmp --fstype="ext3" --grow --percent=5 --name=tmpvol --vgname=os logvol / --fstype="ext3" --grow --percent=50 --name=rootvol --vgname=os logvol /home --fstype="ext3" --grow --percent=5 --name=homevol --vgname=os %pre #!/bin/sh set -x -v exec 1>/tmp/ks-pre.log 2>&1 # Once root's homedir is there, copy over the log. while : ; do sleep 10 if [ -d /mnt/sysimage/root ]; then cp /tmp/ks-pre.log /mnt/sysimage/root/ logger "Copied %pre section log to system" break fi done & # hard drivedd drives=(`ls -1 /sys/block | grep "sd\|hd\|vd\|cciss"`) default_drive=${drives[0]} for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done tgtdrive=$default_drive format_confirmed="no" if [ ${#drives[@]} -lt 1 ]; then exec < /dev/tty3 > /dev/tty3 2>&1 chvt 3 clear echo echo '********************************************************************' echo '* E R R O R *' echo '* *' echo '* There is no suitable media available for installation. *' echo '* Please attach a drive and try again. *' echo '* *' echo '********************************************************************' echo read -p "Press Enter to shut down the system: " _ poweroff fi # verify tgtdrive is at least 30GB tgtdrivesize=$(( $(cat "/sys/class/block/${tgtdrive}/size") / 2 / 1024 )) if [ $tgtdrivesize -lt 30720 ]; then exec < /dev/tty3 > /dev/tty3 2>&1 chvt 3 clear echo echo '********************************************************************' echo '* E R R O R *' echo '* *' echo '* Your disk is under 30GB in size. Installation cannot continue. *' echo '* Restart installation with a larger disk. *' echo '* *' echo '********************************************************************' echo read -p "Press Enter to restart: " _ reboot fi vgremove -ff os dd if=/dev/zero of=/dev/${tgtdrive} bs=10M count=10 sleep 3 hdparm -z /dev/${tgtdrive} parted -s /dev/${tgtdrive} mklabel gpt parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 0 24 parted -s /dev/${tgtdrive} set 1 bios_grub on parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary fat16 24 224 parted -s /dev/${tgtdrive} set 2 boot on parted -a none -s /dev/${tgtdrive} unit MiB mkpart primary 224 424 sleep 3 hdparm -z /dev/${tgtdrive} # partition echo > /tmp/partition.ks echo "partition /boot --onpart=/dev/${tgtdrive}3" >> /tmp/partition.ks echo "partition pv.001 --ondisk=${tgtdrive} --size=30000 --grow" >> /tmp/partition.ks echo "volgroup os pv.001" >> /tmp/partition.ks echo "logvol swap --vgname=os --recommended --name=swap" >> /tmp/partition.ks echo "logvol / --vgname=os --size=10000 --name=root --fstype=ext4" >> /tmp/partition.ks echo "logvol /var --vgname=os --size=10000 --percent 60 --grow --name=var --fstype=ext4" >> /tmp/partition.ks echo "logvol /var/log --vgname=os --size=4096 --percent 40 --grow --name=varlog --fstype=ext4" >> /tmp/partition.ks # bootloader setting echo "bootloader --location=mbr --driveorder=${tgtdrive} --append=' biosdevname=0 crashkernel=none'" > /tmp/bootloader.ks %end %post echo -e "modprobe nf_conntrack_ipv4\nmodprobe nf_conntrack_ipv6\nmodprobe nf_conntrack_tftp\nmodprobe nf_nat_tftp" >> /etc/rc.modules chmod +x /etc/rc.modules echo -e "net.nf_conntrack_max=1048576" >> /etc/sysctl.conf mkdir -p /var/log/coredump echo -e "kernel.core_pattern=/var/log/coredump/core.%e.%p.%h.%t" >> /etc/sysctl.conf chmod 777 /var/log/coredump echo -e "* soft core unlimited\n* hard core unlimited" >> /etc/security/limits.conf %end %post --nochroot --log=/root/anaconda-post-before-chroot.log #!/bin/sh set -x SOURCE="/mnt/sysimage/tmp/source" for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done mkdir -p "${SOURCE}" mount -o bind "/mnt/install/source" "${SOURCE}" %end %post --logfile /var/log/post_install.log set -x -v exec 1>/root/ks-post.log 2>&1 function save_nic_cfg() { scrFile="/etc/sysconfig/network-scripts/ifcfg-$1" sed -i -e 's#^\(HOSTNAME=\).*$#\1'"$hostname"'#' /etc/sysconfig/network grep -q "^\s*$2\s+$hostname" /etc/hosts || echo "$2 $hostname" >> /etc/hosts echo DEVICE=$1> $scrFile echo ONBOOT=yes >> $scrFile echo NM_CONTROLLED=no >> $scrFile echo HWADDR=$4 >> $scrFile echo USERCTL=no >> $scrFile echo PEERDNS=no >> $scrFile echo BOOTPROTO=static >> $scrFile echo IPADDR=$2 >> $scrFile echo NETMASK=$3 >> $scrFile } function save_gateway() { if [[ -z $external_gw ]]; then echo GATEWAY=$gw >> /etc/sysconfig/network else echo GATEWAY=$external_gw >> /etc/sysconfig/network fi search="domain $domain\nsearch $domain" echo -e "${search}\nnameserver 127.0.0.1" > /etc/resolv.conf [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/resolv.conf [ $dns1 ] && echo -e "${search}\nnameserver $dns1" > /etc/dnsmasq.upstream [ $dns2 ] && echo "nameserver $dns2" >> /etc/resolv.conf [ $dns2 ] && echo "nameserver $dns2" >> /etc/dnsmasq.upstream if [[ -z "$dns1" && -z "$dns2" ]]; then if [[ -z $external_gw ]]; then echo "nameserver $gw" >> /etc/resolv.conf else echo "nameserver $external_gw" >> /etc/resolv.conf fi fi } # Default FQDN hostname="compass" for I in `cat /proc/cmdline`; do case "$I" in *=*) eval $I;; esac ; done domain=$hostname gw=$gw ex_gw=$external_gw install_ip=$install_ip install_netmask=$install_netmask install_intf="eth1" #install_hwaddr=`ifconfig $install_intf | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'` save_nic_cfg $install_intf $install_ip $install_netmask $install_hwaddr mgmt_ip=$mgmt_ip mgmt_netmask=$mgmt_netmask mgmt_intf="eth0" #mgmt_hwaddr=`ifconfig $mgmt_intf | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'` save_nic_cfg $mgmt_intf $mgmt_ip $mgmt_netmask $mgmt_hwaddr external_ip=$external_ip external_netmask=$external_mask external_intf="eth2" #external_hwaddr=`ifconfig $external_intf | grep -i hwaddr | sed -e 's#^.*hwaddr[[:space:]]*##I'` save_nic_cfg $external_intf $external_ip $external_netmask $external_hwaddr save_gateway SOURCE=/tmp/source FS=/tmp/fs mkdir -p ${SOURCE} mkdir -p ${FS} repodir="/var/lib/install_iso" # Copying Centos files mkdir -p ${repodir} cp -rf ${SOURCE} ${repodir}/source rm -rf ${repodir}/source/bootstrap/ \ ${repodir}/source/compass/ \ ${repodir}/source/guestimg/ \ ${repodir}/source/pip/ \ ${repodir}/source/repos mkdir -p /root/.ssh /var/www /opt/cobbler chmod 700 /root/.ssh cat ${SOURCE}/bootstrap/boot.rsa.pub >> /root/.ssh/authorized_keys cp -rf ${SOURCE}/compass/* /opt cp -rf ${SOURCE}/repos/cobbler/* /opt/cobbler/ cp -rf ${SOURCE}/ansible/* /opt cp -rf ${SOURCE}/repos/* /opt cp -rf ${SOURCE}/loaders.tar.gz /opt cp -rf ${SOURCE}/pip /var/www/pip cp -rf ${SOURCE}/guestimg /var/www/guestimg tar -zxvf ${SOURCE}/app_packages/packages.tar.gz -C /var/www # Prepare local repository specification rm /etc/yum.repos.d/CentOS*.repo cat > /etc/yum.repos.d/install_iso.repo << EOF [install_iso] name=local repo baseurl=file:$repodir/source gpgcheck=0 EOF # Disable GSSAPI in ssh server config sed -i -e "/^\s*GSSAPICleanupCredentials yes/d" -e "/^\s*GSSAPIAuthentication yes/d" /etc/ssh/sshd_config sed -i 's/Defaults requiretty/#Defaults requiretty/g' /etc/sudoers sed -i 's/^UseDNS/#UseDNS/g' /etc/ssh/sshd_config echo "UseDNS no" >> /etc/ssh/sshd_config # End post_install_network_config generated code %end %packages --nobase @core %end