From 0b6dbdf333c4aa9c9ac3959585eba83522ae9dd8 Mon Sep 17 00:00:00 2001 From: liyuenan Date: Mon, 12 Sep 2016 11:32:39 +0800 Subject: Adjusted the docs structure JIRA:DOCS-159 Change-Id: I30b655740634fc5a46fec3be707cb3abc9274502 Signed-off-by: liyuenan (cherry picked from commit 2ea21d3473c30674c5e7b53564e0a6699dacffbb) --- docs/installationprocedure/bmdeploy.rst | 328 ++++++++++++++++++++++++++++++++ 1 file changed, 328 insertions(+) create mode 100644 docs/installationprocedure/bmdeploy.rst (limited to 'docs/installationprocedure/bmdeploy.rst') diff --git a/docs/installationprocedure/bmdeploy.rst b/docs/installationprocedure/bmdeploy.rst new file mode 100644 index 00000000..d08a8f8a --- /dev/null +++ b/docs/installationprocedure/bmdeploy.rst @@ -0,0 +1,328 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) by Weidong Shao (HUAWEI) and Justin Chi (HUAWEI) + +Installation Guide (Bare Metal Deployment) +========================================== + +Nodes Configuration (Bare Metal Deployment) +------------------------------------------- + +The below file is the inventory template of deployment nodes: + +"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/dha.yml" + +You can write your own IPMI IP/User/Password/Mac address/roles reference to it. + + - name -- Host name for deployment node after installation. + + - ipmiVer -- IPMI interface version for deployment node support. IPMI 1.0 + or IPMI 2.0 is available. + + - ipmiIP -- IPMI IP address for deployment node. Make sure it can access + from Jumphost. + + - ipmiUser -- IPMI Username for deployment node. + + - ipmiPass -- IPMI Password for deployment node. + + - mac -- MAC Address of deployment node PXE NIC . + + - roles -- Components deployed. + +**Set TYPE/FLAVOR and POWER TOOL** + +E.g. +.. code-block:: yaml + + TYPE: baremetal + FLAVOR: cluster + POWER_TOOL: ipmitool + +**Set ipmiUser/ipmiPass and ipmiVer** + +E.g. + +.. code-block:: yaml + + ipmiUser: USER + ipmiPass: PASSWORD + ipmiVer: '2.0' + +**Assignment of different roles to servers** + +E.g. Openstack only deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + mac: 'F8:4A:BF:55:A2:8D' + interfaces: + - eth1: 'F8:4A:BF:55:A2:8E' + ipmiIp: 172.16.130.26 + roles: + - controller + - ha + + - name: host2 + mac: 'D8:49:0B:DA:5A:B7' + interfaces: + - eth1: 'D8:49:0B:DA:5A:B8' + ipmiIp: 172.16.130.27 + roles: + - compute + +NOTE: +IF YOU SELECT MUTIPLE NODES AS CONTROLLER, THE 'ha' role MUST BE SELECT, TOO. + +E.g. Openstack and ceph deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + mac: 'F8:4A:BF:55:A2:8D' + interfaces: + - eth1: 'F8:4A:BF:55:A2:8E' + ipmiIp: 172.16.130.26 + roles: + - controller + - ha + - ceph-adm + - ceph-mon + + - name: host2 + mac: 'D8:49:0B:DA:5A:B7' + interfaces: + - eth1: 'D8:49:0B:DA:5A:B8' + ipmiIp: 172.16.130.27 + roles: + - compute + - ceph-osd + +E.g. Openstack and ODL deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + mac: 'F8:4A:BF:55:A2:8D' + interfaces: + - eth1: 'F8:4A:BF:55:A2:8E' + ipmiIp: 172.16.130.26 + roles: + - controller + - ha + - odl + + - name: host2 + mac: 'D8:49:0B:DA:5A:B7' + interfaces: + - eth1: 'D8:49:0B:DA:5A:B8' + ipmiIp: 172.16.130.27 + roles: + - compute + +E.g. Openstack and ONOS deployment roles setting + +.. code-block:: yaml + + hosts: + - name: host1 + mac: 'F8:4A:BF:55:A2:8D' + interfaces: + - eth1: 'F8:4A:BF:55:A2:8E' + ipmiIp: 172.16.130.26 + roles: + - controller + - ha + - onos + + - name: host2 + mac: 'D8:49:0B:DA:5A:B7' + interfaces: + - eth1: 'D8:49:0B:DA:5A:B8' + ipmiIp: 172.16.130.27 + roles: + - compute + +Network Configuration (Bare Metal Deployment) +--------------------------------------------- + +Before deployment, there are some network configuration to be checked based +on your network topology.Compass4nfv network default configuration file is +"compass4nfv/deploy/conf/hardware_environment/huawei-pod1/network.yml". +You can write your own reference to it. + +**The following figure shows the default network configuration.** + +.. code-block:: console + + + +--+ +--+ +--+ + | | | | | | + | | +------------+ | | | | + | +------+ Jumphost +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host1 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host2 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | +------------+ | | | | + | +------+ host3 +------+ | | | + | | +------+-----+ | | | | + | | | | | | | + | | +------------+ +-----+ | + | | | | | | + | | | | | | + +-++ ++-+ +-++ + ^ ^ ^ + | | | + | | | + +-+-------------------------+ | | + | External Network | | | + +---------------------------+ | | + +-----------------------+---+ | + | IPMI Network | | + +---------------------------+ | + +-------------------------+-+ + | PXE(Installation) Network | + +---------------------------+ + + +Start Deployment (Bare Metal Deployment) +---------------------------------------- + +1. Edit run.sh + +Set OS version and OpenStack version for deployment nodes. + Compass4nfv Colorado supports three OS version based openstack mitaka. + +E.g. + +.. code-block:: bash + + ########## Ubuntu14.04 Mitaka ########## + export OS_VERSION=trusty + export OPENSTACK_VERSION=mitaka + + ########## Ubuntu16.04 Mitaka ########## + # export OS_VERSION=xenial + # export OPENSTACK_VERSION=mitaka_xenial + + ########## Centos7 Mitaka ########## + # export OS_VERSION=centos7 + # export OPENSTACK_VERSION=mitaka + +Set ISO image that you want to deploy + +E.g. + +.. code-block:: bash + + # ISO_URL is your iso's absolute path + export ISO_URL=file:///home/compass/compass4nfv.iso + # or + # export ISO_URL=http://artifacts.opnfv.org/compass4nfv/colorado/opnfv-colorado.1.0.iso + +Set Jumphost PXE NIC. (set eth1 E.g.) + +E.g. + +.. code-block:: bash + + ########## Hardware Deploy Jumpserver PXE NIC ########## + # you need comment out it when virtual deploy + export INSTALL_NIC=eth1 + +Set scenario that you want to deploy + +E.g. + +nosdn-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-nosdn-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml + +ocl-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-ocl-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_ocl.yml + +odl_l2-moon scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-moon-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml + +odl_l2-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l2-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml + +odl_l3-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-odl_l3-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network.yml + +onos-nofeature scenario deploy sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-nofeature-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml + +onos-sfc deploy scenario sample + +.. code-block:: bash + + # DHA is your dha.yml's path + export DHA=./deploy/conf/hardware_environment/huawei-pod1/os-onos-sfc-ha.yml + + # NETWORK is your network.yml's path + export NETWORK=./deploy/conf/hardware_environment/huawei-pod1/network_onos.yml + +2. Run ``run.sh`` + +.. code-block:: bash + + ./run.sh -- cgit 1.2.3-korg