From 79b571dae951ba9bfe36440750c1a1408b19cd69 Mon Sep 17 00:00:00 2001 From: baigk Date: Sun, 2 Aug 2015 21:56:23 -0400 Subject: support deployment os of ubuntu 14.04 with cobbler for compass JIRA: COMPASS-3 Change-Id: I703658b04ec7ec1df4a2a3b9eac5656419d8fd9f Signed-off-by: baigk --- deploy/adapters/cobbler/conf/settings | 450 ++++++++++++++++++++++++++++++++++ 1 file changed, 450 insertions(+) create mode 100644 deploy/adapters/cobbler/conf/settings (limited to 'deploy/adapters/cobbler/conf/settings') diff --git a/deploy/adapters/cobbler/conf/settings b/deploy/adapters/cobbler/conf/settings new file mode 100644 index 00000000..cacae69a --- /dev/null +++ b/deploy/adapters/cobbler/conf/settings @@ -0,0 +1,450 @@ +--- +# cobbler settings file +# restart cobblerd and run "cobbler sync" after making changes +# This config file is in YAML 1.0 format +# see http://yaml.org +# ========================================================== +# if 1, cobbler will allow insertions of system records that duplicate +# the --dns-name information of other system records. In general, +# this is undesirable and should be left 0. +allow_duplicate_hostnames: 0 + +# if 1, cobbler will allow insertions of system records that duplicate +# the ip address information of other system records. In general, +# this is undesirable and should be left 0. +allow_duplicate_ips: 0 + +# if 1, cobbler will allow insertions of system records that duplicate +# the mac address information of other system records. In general, +# this is undesirable. +allow_duplicate_macs: 0 + +# if 1, cobbler will allow settings to be changed dynamically without +# a restart of the cobblerd daemon. You can only change this variable +# by manually editing the settings file, and you MUST restart cobblerd +# after changing it. +allow_dynamic_settings: 0 + +# by default, installs are *not* set to send installation logs to the cobbler +# # # server. With 'anamon_enabled', kickstart templates may use the pre_anamon +# # # snippet to allow remote live monitoring of their installations from the +# # # cobbler server. Installation logs will be stored under +# # # /var/log/cobbler/anamon/. NOTE: This does allow an xmlrpc call to send logs +# # # to this directory, without authentication, so enable only if you are +# # # ok with this limitation. +anamon_enabled: 1 + +# If using authn_pam in the modules.conf, this can be configured +# to change the PAM service authentication will be tested against. +# The default value is "login". +authn_pam_service: "login" + +# Email out a report when cobbler finishes installing a system. +# enabled: set to 1 to turn this feature on +# sender: optional +# email: which addresses to email +# smtp_server: used to specify another server for an MTA +# subject: use the default subject unless overridden +build_reporting_enabled: 0 +build_reporting_sender: "" +build_reporting_email: [ 'root@localhost' ] +build_reporting_smtp_server: "localhost" +build_reporting_subject: "" + +# Cheetah-language kickstart templates can import Python modules. +# while this is a useful feature, it is not safe to allow them to +# import anything they want. This whitelists which modules can be +# imported through Cheetah. Users can expand this as needed but +# should never allow modules such as subprocess or those that +# allow access to the filesystem as Cheetah templates are evaluated +# by cobblerd as code. +cheetah_import_whitelist: + - "random" + - "re" + - "time" + +# Default createrepo_flags to use for new repositories. If you have +# createrepo >= 0.4.10, consider "-c cache --update -C", which can +# dramatically improve your "cobbler reposync" time. "-s sha" +# enables working with Fedora repos from F11/F12 from EL-4 or +# EL-5 without python-hashlib installed (which is not available +# on EL-4) +createrepo_flags: "-c cache -s sha" + +# if no kickstart is specified to profile add, use this template +default_kickstart: /var/lib/cobbler/kickstarts/default.ks + +# configure all installed systems to use these nameservers by default +# unless defined differently in the profile. For DHCP configurations +# you probably do /not/ want to supply this. +default_name_servers: ['$ipaddr'] + +# if using the authz_ownership module (see the Wiki), objects +# created without specifying an owner are assigned to this +# owner and/or group. Can be a comma seperated list. +default_ownership: + - "admin" + +# cobbler has various sample kickstart templates stored +# in /var/lib/cobbler/kickstarts/. This controls +# what install (root) password is set up for those +# systems that reference this variable. The factory +# default is "cobbler" and cobbler check will warn if +# this is not changed. +# The simplest way to change the password is to run +# openssl passwd -1 +# and put the output between the "" below. +default_password_crypted: "$1$huawei$9OkoVJwO4W8vavlXd1bUS/" + +# the default template type to use in the absence of any +# other detected template. If you do not specify the template +# with '#template=' on the first line of your +# templates/snippets, cobbler will assume try to use the +# following template engine to parse the templates. +# +# Current valid values are: cheetah, jinja2 +default_template_type: "cheetah" + +# for libvirt based installs in koan, if no virt bridge +# is specified, which bridge do we try? For EL 4/5 hosts +# this should be xenbr0, for all versions of Fedora, try +# "virbr0". This can be overriden on a per-profile +# basis or at the koan command line though this saves +# typing to just set it here to the most common option. +default_virt_bridge: xenbr0 + +# use this as the default disk size for virt guests (GB) +default_virt_file_size: 5 + +# use this as the default memory size for virt guests (MB) +default_virt_ram: 512 + +# if koan is invoked without --virt-type and no virt-type +# is set on the profile/system, what virtualization type +# should be assumed? Values: xenpv, xenfv, qemu, vmware +# (NOTE: this does not change what virt_type is chosen by import) +default_virt_type: xenpv + +# enable gPXE booting? Enabling this option will cause cobbler +# to copy the undionly.kpxe file to the tftp root directory, +# and if a profile/system is configured to boot via gpxe it will +# chain load off pxelinux.0. +# Default: 0 +enable_gpxe: 0 + +# controls whether cobbler will add each new profile entry to the default +# PXE boot menu. This can be over-ridden on a per-profile +# basis when adding/editing profiles with --enable-menu=0/1. Users +# should ordinarily leave this setting enabled unless they are concerned +# with accidental reinstalls from users who select an entry at the PXE +# boot menu. Adding a password to the boot menus templates +# may also be a good solution to prevent unwanted reinstallations +enable_menu: 0 + +# enable Func-integration? This makes sure each installed machine is set up +# to use func out of the box, which is a powerful way to script and control +# remote machines. +# Func lives at http://fedorahosted.org/func +# read more at https://github.com/cobbler/cobbler/wiki/Func-integration +# you will need to mirror Fedora/EPEL packages for this feature, so see +# https://github.com/cobbler/cobbler/wiki/Manage-yum-repos if you want cobbler +# to help you with this +func_auto_setup: 0 +func_master: overlord.example.org + +# change this port if Apache is not running plaintext on port +# 80. Most people can leave this alone. +http_port: 80 + +# kernel options that should be present in every cobbler installation. +# kernel options can also be applied at the distro/profile/system +# level. +kernel_options: + ksdevice: bootif + lang: ' ' + text: ~ + +# s390 systems require additional kernel options in addition to the +# above defaults +kernel_options_s390x: + RUNKS: 1 + ramdisk_size: 40000 + root: /dev/ram0 + ro: ~ + ip: off + vnc: ~ + +# configuration options if using the authn_ldap module. See the +# the Wiki for details. This can be ignored if you are not using +# LDAP for WebUI/XMLRPC authentication. +ldap_server: "ldap.example.com" +ldap_base_dn: "DC=example,DC=com" +ldap_port: 389 +ldap_tls: 1 +ldap_anonymous_bind: 1 +ldap_search_bind_dn: '' +ldap_search_passwd: '' +ldap_search_prefix: 'uid=' +ldap_tls_cacertfile: '' +ldap_tls_keyfile: '' +ldap_tls_certfile: '' + +# cobbler has a feature that allows for integration with config management +# systems such as Puppet. The following parameters work in conjunction with +# --mgmt-classes and are described in furhter detail at: +# https://github.com/cobbler/cobbler/wiki/Using-cobbler-with-a-configuration-management-system +mgmt_classes: [] +mgmt_parameters: + from_cobbler: 1 + +# if enabled, this setting ensures that puppet is installed during +# machine provision, a client certificate is generated and a +# certificate signing request is made with the puppet master server +puppet_auto_setup: 0 + +# when puppet starts on a system after installation it needs to have +# its certificate signed by the puppet master server. Enabling the +# following feature will ensure that the puppet server signs the +# certificate after installation if the puppet master server is +# running on the same machine as cobbler. This requires +# puppet_auto_setup above to be enabled +sign_puppet_certs_automatically: 0 + +# location of the puppet executable, used for revoking certificates +puppetca_path: "/usr/bin/puppet" + +# when a puppet managed machine is reinstalled it is necessary to +# remove the puppet certificate from the puppet master server before a +# new certificate is signed (see above). Enabling the following +# feature will ensure that the certificate for the machine to be +# installed is removed from the puppet master server if the puppet +# master server is running on the same machine as cobbler. This +# requires puppet_auto_setup above to be enabled +remove_old_puppet_certs_automatically: 0 + +# choose a --server argument when running puppetd/puppet agent during kickstart +#puppet_server: 'puppet' + +# let cobbler know that you're using a newer version of puppet +# choose version 3 to use: 'puppet agent'; version 2 uses status quo: 'puppetd' +#puppet_version: 2 + +# choose whether to enable puppet parameterized classes or not. +# puppet versions prior to 2.6.5 do not support parameters +#puppet_parameterized_classes: 1 + +# set to 1 to enable Cobbler's DHCP management features. +# the choice of DHCP management engine is in /etc/cobbler/modules.conf +manage_dhcp: 1 + +# set to 1 to enable Cobbler's DNS management features. +# the choice of DNS mangement engine is in /etc/cobbler/modules.conf +manage_dns: 1 + +# set to path of bind chroot to create bind-chroot compatible bind +# configuration files. This should be automatically detected. +bind_chroot_path: "" + +# set to the ip address of the master bind DNS server for creating secondary +# bind configuration files +bind_master: 127.0.0.1 + +# set to 1 to enable Cobbler's TFTP management features. +# the choice of TFTP mangement engine is in /etc/cobbler/modules.conf +manage_tftpd: 1 + +# set to 1 to enable Cobbler's RSYNC management features. +manage_rsync: 0 + +# if using BIND (named) for DNS management in /etc/cobbler/modules.conf +# and manage_dns is enabled (above), this lists which zones are managed +# See the Wiki (https://github.com/cobbler/cobbler/wiki/Dns-management) for more info +manage_forward_zones: [] +manage_reverse_zones: [] + +# if using cobbler with manage_dhcp, put the IP address +# of the cobbler server here so that PXE booting guests can find it +# if you do not set this correctly, this will be manifested in TFTP open timeouts. +next_server: $next_server + +# settings for power management features. optional. +# see https://github.com/cobbler/cobbler/wiki/Power-management to learn more +# choices (refer to codes.py): +# apc_snmp bladecenter bullpap drac ether_wake ilo integrity +# ipmilan ipmitool lpar rsa virsh wti +power_management_default_type: 'ipmitool' + +# the commands used by the power management module are sourced +# from what directory? +power_template_dir: "/etc/cobbler/power" + +# if this setting is set to 1, cobbler systems that pxe boot +# will request at the end of their installation to toggle the +# --netboot-enabled record in the cobbler system record. This eliminates +# the potential for a PXE boot loop if the system is set to PXE +# first in it's BIOS order. Enable this if PXE is first in your BIOS +# boot order, otherwise leave this disabled. See the manpage +# for --netboot-enabled. +pxe_just_once: 1 + +# the templates used for PXE config generation are sourced +# from what directory? +pxe_template_dir: "/etc/cobbler/pxe" + +# Path to where system consoles are +consoles: "/var/consoles" + +# Are you using a Red Hat management platform in addition to Cobbler? +# Cobbler can help you register to it. Choose one of the following: +# "off" : I'm not using Red Hat Network, Satellite, or Spacewalk +# "hosted" : I'm using Red Hat Network +# "site" : I'm using Red Hat Satellite Server or Spacewalk +# You will also want to read: https://github.com/cobbler/cobbler/wiki/Tips-for-RHN +redhat_management_type: "off" + +# if redhat_management_type is enabled, choose your server +# "management.example.org" : For Satellite or Spacewalk +# "xmlrpc.rhn.redhat.com" : For Red Hat Network +# This setting is also used by the code that supports using Spacewalk/Satellite users/passwords +# within Cobbler Web and Cobbler XMLRPC. Using RHN Hosted for this is not supported. +# This feature can be used even if redhat_management_type is off, you just have +# to have authn_spacewalk selected in modules.conf +redhat_management_server: "xmlrpc.rhn.redhat.com" + +# specify the default Red Hat authorization key to use to register +# system. If left blank, no registration will be attempted. Similarly +# you can set the --redhat-management-key to blank on any system to +# keep it from trying to register. +redhat_management_key: "" + +# if using authn_spacewalk in modules.conf to let cobbler authenticate +# against Satellite/Spacewalk's auth system, by default it will not allow per user +# access into Cobbler Web and Cobbler XMLRPC. +# in order to permit this, the following setting must be enabled HOWEVER +# doing so will permit all Spacewalk/Satellite users of certain types to edit all +# of cobbler's configuration. +# these roles are: config_admin and org_admin +# users should turn this on only if they want this behavior and +# do not have a cross-multi-org seperation concern. If you have +# a single org in your satellite, it's probably safe to turn this +# on and then you can use CobblerWeb alongside a Satellite install. +redhat_management_permissive: 0 + +# if set to 1, allows /usr/bin/cobbler-register (part of the koan package) +# to be used to remotely add new cobbler system records to cobbler. +# this effectively allows for registration of new hardware from system +# records. +register_new_installs: 0 + +# Flags to use for yum's reposync. If your version of yum reposync +# does not support -l, you may need to remove that option. +reposync_flags: "-l -n -d" + +# These options will be used for an rsync initiated by cobbler replicate +replicate_rsync_options: "-avzH" + +# when DHCP and DNS management are enabled, cobbler sync can automatically +# restart those services to apply changes. The exception for this is +# if using ISC for DHCP, then omapi eliminates the need for a restart. +# omapi, however, is experimental and not recommended for most configurations. +# If DHCP and DNS are going to be managed, but hosted on a box that +# is not on this server, disable restarts here and write some other +# script to ensure that the config files get copied/rsynced to the destination +# box. This can be done by modifying the restart services trigger. +# Note that if manage_dhcp and manage_dns are disabled, the respective +# parameter will have no effect. Most users should not need to change +# this. +restart_dns: 1 +restart_dhcp: 1 + +# install triggers are scripts in /var/lib/cobbler/triggers/install +# that are triggered in kickstart pre and post sections. Any +# executable script in those directories is run. They can be used +# to send email or perform other actions. They are currently +# run as root so if you do not need this functionality you can +# disable it, though this will also disable "cobbler status" which +# uses a logging trigger to audit install progress. +run_install_triggers: 1 + +# enables a trigger which version controls all changes to /var/lib/cobbler +# when add, edit, or sync events are performed. This can be used +# to revert to previous database versions, generate RSS feeds, or for +# other auditing or backup purposes. "git" and "hg" are currently suported, +# but git is the recommend SCM for use with this feature. +scm_track_enabled: 0 +scm_track_mode: "git" + +# this is the address of the cobbler server -- as it is used +# by systems during the install process, it must be the address +# or hostname of the system as those systems can see the server. +# if you have a server that appears differently to different subnets +# (dual homed, etc), you need to read the --server-override section +# of the manpage for how that works. +server: $ipaddr + +# If set to 1, all commands will be forced to use the localhost address +# instead of using the above value which can force commands like +# cobbler sync to open a connection to a remote address if one is in the +# configuration and would traceback. +client_use_localhost: 0 + +# If set to 1, all commands to the API (not directly to the XMLRPC +# server) will go over HTTPS instead of plaintext. Be sure to change +# the http_port setting to the correct value for the web server +client_use_https: 0 + +# this is a directory of files that cobbler uses to make +# templating easier. See the Wiki for more information. Changing +# this directory should not be required. +snippetsdir: /var/lib/cobbler/snippets + +# Normally if a kickstart is specified at a remote location, this +# URL will be passed directly to the kickstarting system, thus bypassing +# the usual snippet templating Cobbler does for local kickstart files. If +# this option is enabled, Cobbler will fetch the file contents internally +# and serve a templated version of the file to the client. +template_remote_kickstarts: 0 + +# should new profiles for virtual machines default to auto booting with the physical host when the physical host reboots? +# this can be overridden on each profile or system object. +virt_auto_boot: 1 + +# cobbler's web directory. Don't change this setting -- see the +# Wiki on "relocating your cobbler install" if your /var partition +# is not large enough. +webdir: /var/www/cobbler + +# cobbler's public XMLRPC listens on this port. Change this only +# if absolutely needed, as you'll have to start supplying a new +# port option to koan if it is not the default. +xmlrpc_port: 25151 + +# "cobbler repo add" commands set cobbler up with repository +# information that can be used during kickstart and is automatically +# set up in the cobbler kickstart templates. By default, these +# are only available at install time. To make these repositories +# usable on installed systems (since cobbler makes a very convient) +# mirror, set this to 1. Most users can safely set this to 1. Users +# who have a dual homed cobbler server, or are installing laptops that +# will not always have access to the cobbler server may wish to leave +# this as 0. In that case, the cobbler mirrored yum repos are still +# accessable at http://cobbler.example.org/cblr/repo_mirror and yum +# configuration can still be done manually. This is just a shortcut. +yum_post_install_mirror: 1 + +# the default yum priority for all the distros. This is only used +# if yum-priorities plugin is used. 1=maximum. Tweak with caution. +yum_distro_priority: 1 + +# Flags to use for yumdownloader. Not all versions may support +# --resolve. +yumdownloader_flags: "--resolve" + +# sort and indent JSON output to make it more human-readable +serializer_pretty_json: 0 + +# replication rsync options for distros, kickstarts, snippets set to override default value of "-avzH" +replicate_rsync_options: "-avzH" + +# replication rsync options for repos set to override default value of "-avzH" +replicate_repo_rsync_options: "-avzH" -- cgit 1.2.3-korg