aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--deploy/adapters/ansible/openstack/HA-ansible-multinodes.yml7
-rw-r--r--plugins/barometer/plugin.desc11
-rw-r--r--plugins/barometer/roles/grafana/files/configure_grafana.sh35
-rw-r--r--plugins/barometer/roles/grafana/files/install_grafana.sh26
-rw-r--r--plugins/barometer/roles/grafana/tasks/grafana.yml34
-rw-r--r--plugins/barometer/roles/grafana/tasks/main.yml11
-rw-r--r--plugins/barometer/roles/influxdb/files/install_influxdb.sh31
-rw-r--r--plugins/barometer/roles/influxdb/tasks/influxdb.yml28
-rw-r--r--plugins/barometer/roles/influxdb/tasks/main.yml11
-rw-r--r--plugins/barometer/roles/influxdb/templates/influxdb.conf.j2478
10 files changed, 672 insertions, 0 deletions
diff --git a/deploy/adapters/ansible/openstack/HA-ansible-multinodes.yml b/deploy/adapters/ansible/openstack/HA-ansible-multinodes.yml
index f923d0d3..178acc3d 100644
--- a/deploy/adapters/ansible/openstack/HA-ansible-multinodes.yml
+++ b/deploy/adapters/ansible/openstack/HA-ansible-multinodes.yml
@@ -56,6 +56,13 @@
- collectd
- hosts:
+ - controller
+ remote_user: root
+ roles:
+ - influxdb
+ - grafana
+
+- hosts:
- neutron_openvswitch_agent
- compute
remote_user: root
diff --git a/plugins/barometer/plugin.desc b/plugins/barometer/plugin.desc
index 3f775cb7..3d976c2e 100644
--- a/plugins/barometer/plugin.desc
+++ b/plugins/barometer/plugin.desc
@@ -15,6 +15,7 @@ plugin:
maintainers:
- john.hinman@intel.com
+ - ramamani.yeleswarapu@intel.com
# host os type: ubuntu/centos
os_version: ubuntu
@@ -49,3 +50,13 @@ plugin:
phrase: post_openstack
inventory:
- compute
+
+ - role: influxdb
+ phrase: post_openstack
+ inventory:
+ - controller
+
+ - role: grafana
+ phrase: post_openstack
+ inventory:
+ - controller
diff --git a/plugins/barometer/roles/grafana/files/configure_grafana.sh b/plugins/barometer/roles/grafana/files/configure_grafana.sh
new file mode 100644
index 00000000..39fcc82b
--- /dev/null
+++ b/plugins/barometer/roles/grafana/files/configure_grafana.sh
@@ -0,0 +1,35 @@
+#!/bin/bash
+# Copyright 2017-2018 OPNFV, Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+if [ -z "${influxdb_host}" ]
+then
+ influxdb_host=localhost
+fi
+
+
+while [ -z "$RETURN" ]
+do
+ sleep 1
+ RETURN=$(curl -u admin:admin -X POST -H 'content-type: application/json'\
+ http://127.0.0.1:3000/api/datasources -d \
+ '{"name":"collectd","type":"influxdb","url":"http://'"${influxdb_host}"':8086","access":"proxy","isDefault":true,"database":"collectd","user":"admin","password":"admin","basicAuth":false}')
+done
+
+FILES=/opt/barometer/docker/barometer-grafana/dashboards/*.json
+for f in $FILES
+do
+ curl -u admin:admin -X POST -H 'content-type: application/json' \
+ http://127.0.0.1:3000/api/dashboards/db -d @$f ;
+done
diff --git a/plugins/barometer/roles/grafana/files/install_grafana.sh b/plugins/barometer/roles/grafana/files/install_grafana.sh
new file mode 100644
index 00000000..0b9f4ec5
--- /dev/null
+++ b/plugins/barometer/roles/grafana/files/install_grafana.sh
@@ -0,0 +1,26 @@
+#!/bin/bash
+# Copyright 2017-2018 OPNFV, Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+echo "deb https://packagecloud.io/grafana/stable/debian/ wheezy main" | tee /etc/apt/sources.list.d/grafana.list
+
+curl https://packagecloud.io/gpg.key | apt-key add -
+
+apt-get update
+
+apt-get install -y grafana
+
+sleep 5
+
+service grafana-server start
diff --git a/plugins/barometer/roles/grafana/tasks/grafana.yml b/plugins/barometer/roles/grafana/tasks/grafana.yml
new file mode 100644
index 00000000..9c01920f
--- /dev/null
+++ b/plugins/barometer/roles/grafana/tasks/grafana.yml
@@ -0,0 +1,34 @@
+# #############################################################################
+# Copyright (c) 2018 Intel Corp.
+#
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+# #############################################################################
+---
+- name: copy install_grafana script
+ remote_user: root
+ copy:
+ src: install_grafana.sh
+ dest: /opt/install_grafana.sh
+ mode: 0777
+
+- name: install grafana
+ command: su -s /bin/sh -c "/opt/install_grafana.sh"
+
+- name: fetch barometer source code
+ remote_user: root
+ shell: |
+ cd /opt && rm -rf barometer;
+ git clone https://github.com/opnfv/barometer.git;
+
+- name: copy configure_grafana script
+ remote_user: root
+ copy:
+ src: configure_grafana.sh
+ dest: /opt/configure_grafana.sh
+ mode: 0777
+
+- name: configure grafana
+ command: su -s /bin/sh -c "/opt/configure_grafana.sh"
diff --git a/plugins/barometer/roles/grafana/tasks/main.yml b/plugins/barometer/roles/grafana/tasks/main.yml
new file mode 100644
index 00000000..50d15b49
--- /dev/null
+++ b/plugins/barometer/roles/grafana/tasks/main.yml
@@ -0,0 +1,11 @@
+# #############################################################################
+# Copyright (c) 2018 Intel Corp.
+#
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+# #############################################################################
+---
+- include: grafana.yml
+ when: barometer is defined and barometer == "Enable"
diff --git a/plugins/barometer/roles/influxdb/files/install_influxdb.sh b/plugins/barometer/roles/influxdb/files/install_influxdb.sh
new file mode 100644
index 00000000..7fd1e046
--- /dev/null
+++ b/plugins/barometer/roles/influxdb/files/install_influxdb.sh
@@ -0,0 +1,31 @@
+#!/bin/bash
+# Copyright 2017-2018 OPNFV, Intel Corporation
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+curl -sL https://repos.influxdata.com/influxdb.key | apt-key add -
+
+source /etc/lsb-release
+
+echo "deb https://repos.influxdata.com/${DISTRIB_ID,,} ${DISTRIB_CODENAME} stable" | tee /etc/apt/sources.list.d/influxdb.list
+
+apt-get update
+
+apt-get install -y influxdb
+
+sleep 5
+
+# install types.db
+mkdir /opt/collectd && mkdir /opt/collectd/share && mkdir /opt/collectd/share/collectd && cd /opt/collectd/share/collectd
+
+wget https://raw.githubusercontent.com/collectd/collectd/master/src/types.db && cd -
diff --git a/plugins/barometer/roles/influxdb/tasks/influxdb.yml b/plugins/barometer/roles/influxdb/tasks/influxdb.yml
new file mode 100644
index 00000000..8e1f4ca1
--- /dev/null
+++ b/plugins/barometer/roles/influxdb/tasks/influxdb.yml
@@ -0,0 +1,28 @@
+# #############################################################################
+# Copyright (c) 2018 Intel Corp.
+#
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+# #############################################################################
+---
+- name: copy install_influxdb script
+ remote_user: root
+ copy:
+ src: install_influxdb.sh
+ dest: /opt/install_influxdb.sh
+ mode: 0777
+
+- name: install influxdb
+ command: su -s /bin/sh -c "/opt/install_influxdb.sh"
+
+- name: configure /etc/influxdb/influxdb.conf
+ remote_user: root
+ template:
+ src: influxdb.conf.j2
+ dest: /etc/influxdb/influxdb.conf
+
+- name: start influxdb service
+ remote_user: root
+ shell: service influxdb start
diff --git a/plugins/barometer/roles/influxdb/tasks/main.yml b/plugins/barometer/roles/influxdb/tasks/main.yml
new file mode 100644
index 00000000..b6da783b
--- /dev/null
+++ b/plugins/barometer/roles/influxdb/tasks/main.yml
@@ -0,0 +1,11 @@
+# #############################################################################
+# Copyright (c) 2018 Intel Corp.
+#
+# All rights reserved. This program and the accompanying materials
+# are made available under the terms of the Apache License, Version 2.0
+# which accompanies this distribution, and is available at
+# http://www.apache.org/licenses/LICENSE-2.0
+# #############################################################################
+---
+- include: influxdb.yml
+ when: barometer is defined and barometer == "Enable"
diff --git a/plugins/barometer/roles/influxdb/templates/influxdb.conf.j2 b/plugins/barometer/roles/influxdb/templates/influxdb.conf.j2
new file mode 100644
index 00000000..d35e93a7
--- /dev/null
+++ b/plugins/barometer/roles/influxdb/templates/influxdb.conf.j2
@@ -0,0 +1,478 @@
+### Welcome to the InfluxDB configuration file.
+
+# The values in this file override the default values used by the system if
+# a config option is not specified. The commented out lines are the configuration
+# field and the default value used. Uncommenting a line and changing the value
+# will change the value used at runtime when the process is restarted.
+
+# Once every 24 hours InfluxDB will report usage data to usage.influxdata.com
+# The data includes a random ID, os, arch, version, the number of series and other
+# usage data. No data from user databases is ever transmitted.
+# Change this option to true to disable reporting.
+# reporting-disabled = false
+
+# Bind address to use for the RPC service for backup and restore.
+# bind-address = "127.0.0.1:8088"
+
+###
+### [meta]
+###
+### Controls the parameters for the Raft consensus group that stores metadata
+### about the InfluxDB cluster.
+###
+
+[meta]
+ # Where the metadata/raft database is stored
+ dir = "/var/lib/influxdb/meta"
+
+ # Automatically create a default retention policy when creating a database.
+ # retention-autocreate = true
+
+ # If log messages are printed for the meta service
+ # logging-enabled = true
+
+###
+### [data]
+###
+### Controls where the actual shard data for InfluxDB lives and how it is
+### flushed from the WAL. "dir" may need to be changed to a suitable place
+### for your system, but the WAL settings are an advanced configuration. The
+### defaults should work for most systems.
+###
+
+[data]
+ # The directory where the TSM storage engine stores TSM files.
+ dir = "/var/lib/influxdb/data"
+
+ # The directory where the TSM storage engine stores WAL files.
+ wal-dir = "/var/lib/influxdb/wal"
+
+ # The amount of time that a write will wait before fsyncing. A duration
+ # greater than 0 can be used to batch up multiple fsync calls. This is useful for slower
+ # disks or when WAL write contention is seen. A value of 0s fsyncs every write to the WAL.
+ # Values in the range of 0-100ms are recommended for non-SSD disks.
+ # wal-fsync-delay = "0s"
+
+
+ # The type of shard index to use for new shards. The default is an in-memory index that is
+ # recreated at startup. A value of "tsi1" will use a disk based index that supports higher
+ # cardinality datasets.
+ # index-version = "inmem"
+
+ # Trace logging provides more verbose output around the tsm engine. Turning
+ # this on can provide more useful output for debugging tsm engine issues.
+ # trace-logging-enabled = false
+
+ # Whether queries should be logged before execution. Very useful for troubleshooting, but will
+ # log any sensitive data contained within a query.
+ # query-log-enabled = true
+
+ # Settings for the TSM engine
+
+ # CacheMaxMemorySize is the maximum size a shard's cache can
+ # reach before it starts rejecting writes.
+ # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+ # Vaues without a size suffix are in bytes.
+ # cache-max-memory-size = "1g"
+
+ # CacheSnapshotMemorySize is the size at which the engine will
+ # snapshot the cache and write it to a TSM file, freeing up memory
+ # Valid size suffixes are k, m, or g (case insensitive, 1024 = 1k).
+ # Values without a size suffix are in bytes.
+ # cache-snapshot-memory-size = "25m"
+
+ # CacheSnapshotWriteColdDuration is the length of time at
+ # which the engine will snapshot the cache and write it to
+ # a new TSM file if the shard hasn't received writes or deletes
+ # cache-snapshot-write-cold-duration = "10m"
+
+ # CompactFullWriteColdDuration is the duration at which the engine
+ # will compact all TSM files in a shard if it hasn't received a
+ # write or delete
+ # compact-full-write-cold-duration = "4h"
+
+ # The maximum number of concurrent full and level compactions that can run at one time. A
+ # value of 0 results in 50% of runtime.GOMAXPROCS(0) used at runtime. Any number greater
+ # than 0 limits compactions to that value. This setting does not apply
+ # to cache snapshotting.
+ # max-concurrent-compactions = 0
+
+ # The maximum series allowed per database before writes are dropped. This limit can prevent
+ # high cardinality issues at the database level. This limit can be disabled by setting it to
+ # 0.
+ # max-series-per-database = 1000000
+
+ # The maximum number of tag values per tag that are allowed before writes are dropped. This limit
+ # can prevent high cardinality tag values from being written to a measurement. This limit can be
+ # disabled by setting it to 0.
+ # max-values-per-tag = 100000
+
+###
+### [coordinator]
+###
+### Controls the clustering service configuration.
+###
+
+[coordinator]
+ # The default time a write request will wait until a "timeout" error is returned to the caller.
+ # write-timeout = "10s"
+
+ # The maximum number of concurrent queries allowed to be executing at one time. If a query is
+ # executed and exceeds this limit, an error is returned to the caller. This limit can be disabled
+ # by setting it to 0.
+ # max-concurrent-queries = 0
+
+ # The maximum time a query will is allowed to execute before being killed by the system. This limit
+ # can help prevent run away queries. Setting the value to 0 disables the limit.
+ # query-timeout = "0s"
+
+ # The time threshold when a query will be logged as a slow query. This limit can be set to help
+ # discover slow or resource intensive queries. Setting the value to 0 disables the slow query logging.
+ # log-queries-after = "0s"
+
+ # The maximum number of points a SELECT can process. A value of 0 will make
+ # the maximum point count unlimited. This will only be checked every second so queries will not
+ # be aborted immediately when hitting the limit.
+ # max-select-point = 0
+
+ # The maximum number of series a SELECT can run. A value of 0 will make the maximum series
+ # count unlimited.
+ # max-select-series = 0
+
+ # The maxium number of group by time bucket a SELECT can create. A value of zero will max the maximum
+ # number of buckets unlimited.
+ # max-select-buckets = 0
+
+###
+### [retention]
+###
+### Controls the enforcement of retention policies for evicting old data.
+###
+
+[retention]
+ # Determines whether retention policy enforcement enabled.
+ # enabled = true
+
+ # The interval of time when retention policy enforcement checks run.
+ # check-interval = "30m"
+
+###
+### [shard-precreation]
+###
+### Controls the precreation of shards, so they are available before data arrives.
+### Only shards that, after creation, will have both a start- and end-time in the
+### future, will ever be created. Shards are never precreated that would be wholly
+### or partially in the past.
+
+[shard-precreation]
+ # Determines whether shard pre-creation service is enabled.
+ # enabled = true
+
+ # The interval of time when the check to pre-create new shards runs.
+ # check-interval = "10m"
+
+ # The default period ahead of the endtime of a shard group that its successor
+ # group is created.
+ # advance-period = "30m"
+
+###
+### Controls the system self-monitoring, statistics and diagnostics.
+###
+### The internal database for monitoring data is created automatically if
+### if it does not already exist. The target retention within this database
+### is called 'monitor' and is also created with a retention period of 7 days
+### and a replication factor of 1, if it does not exist. In all cases the
+### this retention policy is configured as the default for the database.
+
+[monitor]
+ # Whether to record statistics internally.
+ # store-enabled = true
+
+ # The destination database for recorded statistics
+ # store-database = "_internal"
+
+ # The interval at which to record statistics
+ # store-interval = "10s"
+
+###
+### [http]
+###
+### Controls how the HTTP endpoints are configured. These are the primary
+### mechanism for getting data into and out of InfluxDB.
+###
+
+[http]
+ # Determines whether HTTP endpoint is enabled.
+ # enabled = true
+
+ # The bind address used by the HTTP service.
+ # bind-address = ":8086"
+
+ # Determines whether user authentication is enabled over HTTP/HTTPS.
+ # auth-enabled = false
+
+ # The default realm sent back when issuing a basic auth challenge.
+ # realm = "InfluxDB"
+
+ # Determines whether HTTP request logging is enabled.
+ # log-enabled = true
+
+ # Determines whether detailed write logging is enabled.
+ # write-tracing = false
+
+ # Determines whether the pprof endpoint is enabled. This endpoint is used for
+ # troubleshooting and monitoring.
+ # pprof-enabled = true
+
+ # Determines whether HTTPS is enabled.
+ # https-enabled = false
+
+ # The SSL certificate to use when HTTPS is enabled.
+ # https-certificate = "/etc/ssl/influxdb.pem"
+
+ # Use a separate private key location.
+ # https-private-key = ""
+
+ # The JWT auth shared secret to validate requests using JSON web tokens.
+ # shared-secret = ""
+
+ # The default chunk size for result sets that should be chunked.
+ # max-row-limit = 0
+
+ # The maximum number of HTTP connections that may be open at once. New connections that
+ # would exceed this limit are dropped. Setting this value to 0 disables the limit.
+ # max-connection-limit = 0
+
+ # Enable http service over unix domain socket
+ # unix-socket-enabled = false
+
+ # The path of the unix domain socket.
+ # bind-socket = "/var/run/influxdb.sock"
+
+ # The maximum size of a client request body, in bytes. Setting this value to 0 disables the limit.
+ # max-body-size = 25000000
+
+
+###
+### [ifql]
+###
+### Configures the ifql RPC API.
+###
+
+[ifql]
+ # Determines whether the RPC service is enabled.
+ # enabled = true
+
+ # Determines whether additional logging is enabled.
+ # log-enabled = true
+
+ # The bind address used by the ifql RPC service.
+ # bind-address = ":8082"
+
+
+###
+### [subscriber]
+###
+### Controls the subscriptions, which can be used to fork a copy of all data
+### received by the InfluxDB host.
+###
+
+[subscriber]
+ # Determines whether the subscriber service is enabled.
+ # enabled = true
+
+ # The default timeout for HTTP writes to subscribers.
+ # http-timeout = "30s"
+
+ # Allows insecure HTTPS connections to subscribers. This is useful when testing with self-
+ # signed certificates.
+ # insecure-skip-verify = false
+
+ # The path to the PEM encoded CA certs file. If the empty string, the default system certs will be used
+ # ca-certs = ""
+
+ # The number of writer goroutines processing the write channel.
+ # write-concurrency = 40
+
+ # The number of in-flight writes buffered in the write channel.
+ # write-buffer-size = 1000
+
+
+###
+### [[graphite]]
+###
+### Controls one or many listeners for Graphite data.
+###
+
+[[graphite]]
+ # Determines whether the graphite endpoint is enabled.
+ # enabled = false
+ # database = "graphite"
+ # retention-policy = ""
+ # bind-address = ":2003"
+ # protocol = "tcp"
+ # consistency-level = "one"
+
+ # These next lines control how batching works. You should have this enabled
+ # otherwise you could get dropped metrics or poor performance. Batching
+ # will buffer points in memory if you have many coming in.
+
+ # Flush if this many points get buffered
+ # batch-size = 5000
+
+ # number of batches that may be pending in memory
+ # batch-pending = 10
+
+ # Flush at least this often even if we haven't hit buffer limit
+ # batch-timeout = "1s"
+
+ # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+ # udp-read-buffer = 0
+
+ ### This string joins multiple matching 'measurement' values providing more control over the final measurement name.
+ # separator = "."
+
+ ### Default tags that will be added to all metrics. These can be overridden at the template level
+ ### or by tags extracted from metric
+ # tags = ["region=us-east", "zone=1c"]
+
+ ### Each template line requires a template pattern. It can have an optional
+ ### filter before the template and separated by spaces. It can also have optional extra
+ ### tags following the template. Multiple tags should be separated by commas and no spaces
+ ### similar to the line protocol format. There can be only one default template.
+ # templates = [
+ # "*.app env.service.resource.measurement",
+ # # Default template
+ # "server.*",
+ # ]
+
+###
+### [collectd]
+###
+### Controls one or many listeners for collectd data.
+###
+
+[[collectd]]
+ enabled = true
+ bind-address = ":25826" # the bind address
+ database = "collectd" # Name of the database that will be written to
+ retention-policy = ""
+ batch-size = 5000 # will flush if this many points get buffered
+ batch-pending = 10 # number of batches that may be pending in memory
+ batch-timeout = "10s"
+ read-buffer = 0 # UDP read buffer size, 0 means to use OS default
+ typesdb = "/opt/collectd/share/collectd/types.db"
+ security-level = "none" # "none", "sign", or "encrypt"
+
+ # enabled = false
+ # bind-address = ":25826"
+ # database = "collectd"
+ # retention-policy = ""
+ #
+ # The collectd service supports either scanning a directory for multiple types
+ # db files, or specifying a single db file.
+ # typesdb = "/usr/local/share/collectd"
+ #
+ # security-level = "none"
+ # auth-file = "/etc/collectd/auth_file"
+
+ # These next lines control how batching works. You should have this enabled
+ # otherwise you could get dropped metrics or poor performance. Batching
+ # will buffer points in memory if you have many coming in.
+
+ # Flush if this many points get buffered
+ # batch-size = 5000
+
+ # Number of batches that may be pending in memory
+ # batch-pending = 10
+
+ # Flush at least this often even if we haven't hit buffer limit
+ # batch-timeout = "10s"
+
+ # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+ # read-buffer = 0
+
+ # Multi-value plugins can be handled two ways.
+ # "split" will parse and store the multi-value plugin data into separate measurements
+ # "join" will parse and store the multi-value plugin as a single multi-value measurement.
+ # "split" is the default behavior for backward compatability with previous versions of influxdb.
+ # parse-multivalue-plugin = "split"
+###
+### [opentsdb]
+###
+### Controls one or many listeners for OpenTSDB data.
+###
+
+[[opentsdb]]
+ # enabled = false
+ # bind-address = ":4242"
+ # database = "opentsdb"
+ # retention-policy = ""
+ # consistency-level = "one"
+ # tls-enabled = false
+ # certificate= "/etc/ssl/influxdb.pem"
+
+ # Log an error for every malformed point.
+ # log-point-errors = true
+
+ # These next lines control how batching works. You should have this enabled
+ # otherwise you could get dropped metrics or poor performance. Only points
+ # metrics received over the telnet protocol undergo batching.
+
+ # Flush if this many points get buffered
+ # batch-size = 1000
+
+ # Number of batches that may be pending in memory
+ # batch-pending = 5
+
+ # Flush at least this often even if we haven't hit buffer limit
+ # batch-timeout = "1s"
+
+###
+### [[udp]]
+###
+### Controls the listeners for InfluxDB line protocol data via UDP.
+###
+
+[[udp]]
+ # enabled = false
+ # bind-address = ":8089"
+ # database = "udp"
+ # retention-policy = ""
+
+ # These next lines control how batching works. You should have this enabled
+ # otherwise you could get dropped metrics or poor performance. Batching
+ # will buffer points in memory if you have many coming in.
+
+ # Flush if this many points get buffered
+ # batch-size = 5000
+
+ # Number of batches that may be pending in memory
+ # batch-pending = 10
+
+ # Will flush at least this often even if we haven't hit buffer limit
+ # batch-timeout = "1s"
+
+ # UDP Read buffer size, 0 means OS default. UDP listener will fail if set above OS max.
+ # read-buffer = 0
+
+###
+### [continuous_queries]
+###
+### Controls how continuous queries are run within InfluxDB.
+###
+
+[continuous_queries]
+ # Determines whether the continuous query service is enabled.
+ # enabled = true
+
+ # Controls whether queries are logged when executed by the CQ service.
+ # log-enabled = true
+
+ # Controls whether queries are logged to the self-monitoring data store.
+ # query-stats-enabled = false
+
+ # interval for how often continuous queries will be checked if they need to run
+ # run-interval = "1s"
+
+