From 9401f816dd0d9d550fe98a8507224bde51c4b847 Mon Sep 17 00:00:00 2001 From: hongbotian Date: Mon, 30 Nov 2015 02:41:33 -0500 Subject: upload tomcat JIRA: BOTTLENECK-7 Change-Id: I875d474869efd76ca203c30b60ebc0c3ee606d0e Signed-off-by: hongbotian --- .../native/iis/pcre/ChangeLog | 1650 ++++++++++++++++++++ 1 file changed, 1650 insertions(+) create mode 100644 rubbos/app/tomcat-connectors-1.2.32-src/native/iis/pcre/ChangeLog (limited to 'rubbos/app/tomcat-connectors-1.2.32-src/native/iis/pcre/ChangeLog') diff --git a/rubbos/app/tomcat-connectors-1.2.32-src/native/iis/pcre/ChangeLog b/rubbos/app/tomcat-connectors-1.2.32-src/native/iis/pcre/ChangeLog new file mode 100644 index 00000000..266cb18c --- /dev/null +++ b/rubbos/app/tomcat-connectors-1.2.32-src/native/iis/pcre/ChangeLog @@ -0,0 +1,1650 @@ +ChangeLog for PCRE +------------------ + +Version 5.0 13-Sep-04 +--------------------- + + 1. Internal change: literal characters are no longer packed up into items + containing multiple characters in a single byte-string. Each character + is now matched using a separate opcode. However, there may be more than one + byte in the character in UTF-8 mode. + + 2. The pcre_callout_block structure has two new fields: pattern_position and + next_item_length. These contain the offset in the pattern to the next match + item, and its length, respectively. + + 3. The PCRE_AUTO_CALLOUT option for pcre_compile() requests the automatic + insertion of callouts before each pattern item. Added the /C option to + pcretest to make use of this. + + 4. On the advice of a Windows user, the lines + + #if defined(_WIN32) || defined(WIN32) + _setmode( _fileno( stdout ), 0x8000 ); + #endif /* defined(_WIN32) || defined(WIN32) */ + + have been added to the source of pcretest. This apparently does useful + magic in relation to line terminators. + + 5. Changed "r" and "w" in the calls to fopen() in pcretest to "rb" and "wb" + for the benefit of those environments where the "b" makes a difference. + + 6. The icc compiler has the same options as gcc, but "configure" doesn't seem + to know about it. I have put a hack into configure.in that adds in code + to set GCC=yes if CC=icc. This seems to end up at a point in the + generated configure script that is early enough to affect the setting of + compiler options, which is what is needed, but I have no means of testing + whether it really works. (The user who reported this had patched the + generated configure script, which of course I cannot do.) + + LATER: After change 22 below (new libtool files), the configure script + seems to know about icc (and also ecc). Therefore, I have commented out + this hack in configure.in. + + 7. Added support for pkg-config (2 patches were sent in). + + 8. Negated POSIX character classes that used a combination of internal tables + were completely broken. These were [[:^alpha:]], [[:^alnum:]], and + [[:^ascii]]. Typically, they would match almost any characters. The other + POSIX classes were not broken in this way. + + 9. Matching the pattern "\b.*?" against "ab cd", starting at offset 1, failed + to find the match, as PCRE was deluded into thinking that the match had to + start at the start point or following a newline. The same bug applied to + patterns with negative forward assertions or any backward assertions + preceding ".*" at the start, unless the pattern required a fixed first + character. This was a failing pattern: "(?!.bcd).*". The bug is now fixed. + +10. In UTF-8 mode, when moving forwards in the subject after a failed match + starting at the last subject character, bytes beyond the end of the subject + string were read. + +11. Renamed the variable "class" as "classbits" to make life easier for C++ + users. (Previously there was a macro definition, but it apparently wasn't + enough.) + +12. Added the new field "tables" to the extra data so that tables can be passed + in at exec time, or the internal tables can be re-selected. This allows + a compiled regex to be saved and re-used at a later time by a different + program that might have everything at different addresses. + +13. Modified the pcre-config script so that, when run on Solaris, it shows a + -R library as well as a -L library. + +14. The debugging options of pcretest (-d on the command line or D on a + pattern) showed incorrect output for anything following an extended class + that contained multibyte characters and which was followed by a quantifier. + +15. Added optional support for general category Unicode character properties + via the \p, \P, and \X escapes. Unicode property support implies UTF-8 + support. It adds about 90K to the size of the library. The meanings of the + inbuilt class escapes such as \d and \s have NOT been changed. + +16. Updated pcredemo.c to include calls to free() to release the memory for the + compiled pattern. + +17. The generated file chartables.c was being created in the source directory + instead of in the building directory. This caused the build to fail if the + source directory was different from the building directory, and was + read-only. + +18. Added some sample Win commands from Mark Tetrode into the NON-UNIX-USE + file. No doubt somebody will tell me if they don't make sense... Also added + Dan Mooney's comments about building on OpenVMS. + +19. Added support for partial matching via the PCRE_PARTIAL option for + pcre_exec() and the \P data escape in pcretest. + +20. Extended pcretest with 3 new pattern features: + + (i) A pattern option of the form ">rest-of-line" causes pcretest to + write the compiled pattern to the file whose name is "rest-of-line". + This is a straight binary dump of the data, with the saved pointer to + the character tables forced to be NULL. The study data, if any, is + written too. After writing, pcretest reads a new pattern. + + (ii) If, instead of a pattern, ": new target + : new target + : use native compiler + : use native linker + : handle Windows platform correctly + : ditto + : ditto + copy DLL to top builddir before testing + + As part of these changes, -no-undefined was removed again. This was reported + to give trouble on HP-UX 11.0, so getting rid of it seems like a good idea + in any case. + +3. Some tidies to get rid of compiler warnings: + + . In the match_data structure, match_limit was an unsigned long int, whereas + match_call_count was an int. I've made them both unsigned long ints. + + . In pcretest the fact that a const uschar * doesn't automatically cast to + a void * provoked a warning. + + . Turning on some more compiler warnings threw up some "shadow" variables + and a few more missing casts. + +4. If PCRE was complied with UTF-8 support, but called without the PCRE_UTF8 + option, a class that contained a single character with a value between 128 + and 255 (e.g. /[\xFF]/) caused PCRE to crash. + +5. If PCRE was compiled with UTF-8 support, but called without the PCRE_UTF8 + option, a class that contained several characters, but with at least one + whose value was between 128 and 255 caused PCRE to crash. + + +Version 4.1 12-Mar-03 +--------------------- + +1. Compiling with gcc -pedantic found a couple of places where casts were +needed, and a string in dftables.c that was longer than standard compilers are +required to support. + +2. Compiling with Sun's compiler found a few more places where the code could +be tidied up in order to avoid warnings. + +3. The variables for cross-compiling were called HOST_CC and HOST_CFLAGS; the +first of these names is deprecated in the latest Autoconf in favour of the name +CC_FOR_BUILD, because "host" is typically used to mean the system on which the +compiled code will be run. I can't find a reference for HOST_CFLAGS, but by +analogy I have changed it to CFLAGS_FOR_BUILD. + +4. Added -no-undefined to the linking command in the Makefile, because this is +apparently helpful for Windows. To make it work, also added "-L. -lpcre" to the +linking step for the pcreposix library. + +5. PCRE was failing to diagnose the case of two named groups with the same +name. + +6. A problem with one of PCRE's optimizations was discovered. PCRE remembers a +literal character that is needed in the subject for a match, and scans along to +ensure that it is present before embarking on the full matching process. This +saves time in cases of nested unlimited repeats that are never going to match. +Problem: the scan can take a lot of time if the subject is very long (e.g. +megabytes), thus penalizing straightforward matches. It is now done only if the +amount of subject to be scanned is less than 1000 bytes. + +7. A lesser problem with the same optimization is that it was recording the +first character of an anchored pattern as "needed", thus provoking a search +right along the subject, even when the first match of the pattern was going to +fail. The "needed" character is now not set for anchored patterns, unless it +follows something in the pattern that is of non-fixed length. Thus, it still +fulfils its original purpose of finding quick non-matches in cases of nested +unlimited repeats, but isn't used for simple anchored patterns such as /^abc/. + + +Version 4.0 17-Feb-03 +--------------------- + +1. If a comment in an extended regex that started immediately after a meta-item +extended to the end of string, PCRE compiled incorrect data. This could lead to +all kinds of weird effects. Example: /#/ was bad; /()#/ was bad; /a#/ was not. + +2. Moved to autoconf 2.53 and libtool 1.4.2. + +3. Perl 5.8 no longer needs "use utf8" for doing UTF-8 things. Consequently, +the special perltest8 script is no longer needed - all the tests can be run +from a single perltest script. + +4. From 5.004, Perl has not included the VT character (0x0b) in the set defined +by \s. It has now been removed in PCRE. This means it isn't recognized as +whitespace in /x regexes too, which is the same as Perl. Note that the POSIX +class [:space:] *does* include VT, thereby creating a mess. + +5. Added the class [:blank:] (a GNU extension from Perl 5.8) to match only +space and tab. + +6. Perl 5.005 was a long time ago. It's time to amalgamate the tests that use +its new features into the main test script, reducing the number of scripts. + +7. Perl 5.8 has changed the meaning of patterns like /a(?i)b/. Earlier versions +were backward compatible, and made the (?i) apply to the whole pattern, as if +/i were given. Now it behaves more logically, and applies the option setting +only to what follows. PCRE has been changed to follow suit. However, if it +finds options settings right at the start of the pattern, it extracts them into +the global options, as before. Thus, they show up in the info data. + +8. Added support for the \Q...\E escape sequence. Characters in between are +treated as literals. This is slightly different from Perl in that $ and @ are +also handled as literals inside the quotes. In Perl, they will cause variable +interpolation. Note the following examples: + + Pattern PCRE matches Perl matches + + \Qabc$xyz\E abc$xyz abc followed by the contents of $xyz + \Qabc\$xyz\E abc\$xyz abc\$xyz + \Qabc\E\$\Qxyz\E abc$xyz abc$xyz + +For compatibility with Perl, \Q...\E sequences are recognized inside character +classes as well as outside them. + +9. Re-organized 3 code statements in pcretest to avoid "overflow in +floating-point constant arithmetic" warnings from a Microsoft compiler. Added a +(size_t) cast to one statement in pcretest and one in pcreposix to avoid +signed/unsigned warnings. + +10. SunOS4 doesn't have strtoul(). This was used only for unpicking the -o +option for pcretest, so I've replaced it by a simple function that does just +that job. + +11. pcregrep was ending with code 0 instead of 2 for the commands "pcregrep" or +"pcregrep -". + +12. Added "possessive quantifiers" ?+, *+, ++, and {,}+ which come from Sun's +Java package. This provides some syntactic sugar for simple cases of what my +documentation calls "once-only subpatterns". A pattern such as x*+ is the same +as (?>x*). In other words, if what is inside (?>...) is just a single repeated +item, you can use this simplified notation. Note that only makes sense with +greedy quantifiers. Consequently, the use of the possessive quantifier forces +greediness, whatever the setting of the PCRE_UNGREEDY option. + +13. A change of greediness default within a pattern was not taking effect at +the current level for patterns like /(b+(?U)a+)/. It did apply to parenthesized +subpatterns that followed. Patterns like /b+(?U)a+/ worked because the option +was abstracted outside. + +14. PCRE now supports the \G assertion. It is true when the current matching +position is at the start point of the match. This differs from \A when the +starting offset is non-zero. Used with the /g option of pcretest (or similar +code), it works in the same way as it does for Perl's /g option. If all +alternatives of a regex begin with \G, the expression is anchored to the start +match position, and the "anchored" flag is set in the compiled expression. + +15. Some bugs concerning the handling of certain option changes within patterns +have been fixed. These applied to options other than (?ims). For example, +"a(?x: b c )d" did not match "XabcdY" but did match "Xa b c dY". It should have +been the other way round. Some of this was related to change 7 above. + +16. PCRE now gives errors for /[.x.]/ and /[=x=]/ as unsupported POSIX +features, as Perl does. Previously, PCRE gave the warnings only for /[[.x.]]/ +and /[[=x=]]/. PCRE now also gives an error for /[:name:]/ because it supports +POSIX classes only within a class (e.g. /[[:alpha:]]/). + +17. Added support for Perl's \C escape. This matches one byte, even in UTF8 +mode. Unlike ".", it always matches newline, whatever the setting of +PCRE_DOTALL. However, PCRE does not permit \C to appear in lookbehind +assertions. Perl allows it, but it doesn't (in general) work because it can't +calculate the length of the lookbehind. At least, that's the case for Perl +5.8.0 - I've been told they are going to document that it doesn't work in +future. + +18. Added an error diagnosis for escapes that PCRE does not support: these are +\L, \l, \N, \P, \p, \U, \u, and \X. + +19. Although correctly diagnosing a missing ']' in a character class, PCRE was +reading past the end of the pattern in cases such as /[abcd/. + +20. PCRE was getting more memory than necessary for patterns with classes that +contained both POSIX named classes and other characters, e.g. /[[:space:]abc/. + +21. Added some code, conditional on #ifdef VPCOMPAT, to make life easier for +compiling PCRE for use with Virtual Pascal. + +22. Small fix to the Makefile to make it work properly if the build is done +outside the source tree. + +23. Added a new extension: a condition to go with recursion. If a conditional +subpattern starts with (?(R) the "true" branch is used if recursion has +happened, whereas the "false" branch is used only at the top level. + +24. When there was a very long string of literal characters (over 255 bytes +without UTF support, over 250 bytes with UTF support), the computation of how +much memory was required could be incorrect, leading to segfaults or other +strange effects. + +25. PCRE was incorrectly assuming anchoring (either to start of subject or to +start of line for a non-DOTALL pattern) when a pattern started with (.*) and +there was a subsequent back reference to those brackets. This meant that, for +example, /(.*)\d+\1/ failed to match "abc123bc". Unfortunately, it isn't +possible to check for precisely this case. All we can do is abandon the +optimization if .* occurs inside capturing brackets when there are any back +references whatsoever. (See below for a better fix that came later.) + +26. The handling of the optimization for finding the first character of a +non-anchored pattern, and for finding a character that is required later in the +match were failing in some cases. This didn't break the matching; it just +failed to optimize when it could. The way this is done has been re-implemented. + +27. Fixed typo in error message for invalid (?R item (it said "(?p"). + +28. Added a new feature that provides some of the functionality that Perl +provides with (?{...}). The facility is termed a "callout". The way it is done +in PCRE is for the caller to provide an optional function, by setting +pcre_callout to its entry point. Like pcre_malloc and pcre_free, this is a +global variable. By default it is unset, which disables all calling out. To get +the function called, the regex must include (?C) at appropriate points. This +is, in fact, equivalent to (?C0), and any number <= 255 may be given with (?C). +This provides a means of identifying different callout points. When PCRE +reaches such a point in the regex, if pcre_callout has been set, the external +function is called. It is provided with data in a structure called +pcre_callout_block, which is defined in pcre.h. If the function returns 0, +matching continues; if it returns a non-zero value, the match at the current +point fails. However, backtracking will occur if possible. [This was changed +later and other features added - see item 49 below.] + +29. pcretest is upgraded to test the callout functionality. It provides a +callout function that displays information. By default, it shows the start of +the match and the current position in the text. There are some new data escapes +to vary what happens: + + \C+ in addition, show current contents of captured substrings + \C- do not supply a callout function + \C!n return 1 when callout number n is reached + \C!n!m return 1 when callout number n is reached for the mth time + +30. If pcregrep was called with the -l option and just a single file name, it +output "" if a match was found, instead of the file name. + +31. Improve the efficiency of the POSIX API to PCRE. If the number of capturing +slots is less than POSIX_MALLOC_THRESHOLD, use a block on the stack to pass to +pcre_exec(). This saves a malloc/free per call. The default value of +POSIX_MALLOC_THRESHOLD is 10; it can be changed by --with-posix-malloc-threshold +when configuring. + +32. The default maximum size of a compiled pattern is 64K. There have been a +few cases of people hitting this limit. The code now uses macros to handle the +storing of links as offsets within the compiled pattern. It defaults to 2-byte +links, but this can be changed to 3 or 4 bytes by --with-link-size when +configuring. Tests 2 and 5 work only with 2-byte links because they output +debugging information about compiled patterns. + +33. Internal code re-arrangements: + +(a) Moved the debugging function for printing out a compiled regex into + its own source file (printint.c) and used #include to pull it into + pcretest.c and, when DEBUG is defined, into pcre.c, instead of having two + separate copies. + +(b) Defined the list of op-code names for debugging as a macro in + internal.h so that it is next to the definition of the opcodes. + +(c) Defined a table of op-code lengths for simpler skipping along compiled + code. This is again a macro in internal.h so that it is next to the + definition of the opcodes. + +34. Added support for recursive calls to individual subpatterns, along the +lines of Robin Houston's patch (but implemented somewhat differently). + +35. Further mods to the Makefile to help Win32. Also, added code to pcregrep to +allow it to read and process whole directories in Win32. This code was +contributed by Lionel Fourquaux; it has not been tested by me. + +36. Added support for named subpatterns. The Python syntax (?P...) is +used to name a group. Names consist of alphanumerics and underscores, and must +be unique. Back references use the syntax (?P=name) and recursive calls use +(?P>name) which is a PCRE extension to the Python extension. Groups still have +numbers. The function pcre_fullinfo() can be used after compilation to extract +a name/number map. There are three relevant calls: + + PCRE_INFO_NAMEENTRYSIZE yields the size of each entry in the map + PCRE_INFO_NAMECOUNT yields the number of entries + PCRE_INFO_NAMETABLE yields a pointer to the map. + +The map is a vector of fixed-size entries. The size of each entry depends on +the length of the longest name used. The first two bytes of each entry are the +group number, most significant byte first. There follows the corresponding +name, zero terminated. The names are in alphabetical order. + +37. Make the maximum literal string in the compiled code 250 for the non-UTF-8 +case instead of 255. Making it the same both with and without UTF-8 support +means that the same test output works with both. + +38. There was a case of malloc(0) in the POSIX testing code in pcretest. Avoid +calling malloc() with a zero argument. + +39. Change 25 above had to resort to a heavy-handed test for the .* anchoring +optimization. I've improved things by keeping a bitmap of backreferences with +numbers 1-31 so that if .* occurs inside capturing brackets that are not in +fact referenced, the optimization can be applied. It is unlikely that a +relevant occurrence of .* (i.e. one which might indicate anchoring or forcing +the match to follow \n) will appear inside brackets with a number greater than +31, but if it does, any back reference > 31 suppresses the optimization. + +40. Added a new compile-time option PCRE_NO_AUTO_CAPTURE. This has the effect +of disabling numbered capturing parentheses. Any opening parenthesis that is +not followed by ? behaves as if it were followed by ?: but named parentheses +can still be used for capturing (and they will acquire numbers in the usual +way). + +41. Redesigned the return codes from the match() function into yes/no/error so +that errors can be passed back from deep inside the nested calls. A malloc +failure while inside a recursive subpattern call now causes the +PCRE_ERROR_NOMEMORY return instead of quietly going wrong. + +42. It is now possible to set a limit on the number of times the match() +function is called in a call to pcre_exec(). This facility makes it possible to +limit the amount of recursion and backtracking, though not in a directly +obvious way, because the match() function is used in a number of different +circumstances. The count starts from zero for each position in the subject +string (for non-anchored patterns). The default limit is, for compatibility, a +large number, namely 10 000 000. You can change this in two ways: + +(a) When configuring PCRE before making, you can use --with-match-limit=n + to set a default value for the compiled library. + +(b) For each call to pcre_exec(), you can pass a pcre_extra block in which + a different value is set. See 45 below. + +If the limit is exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT. + +43. Added a new function pcre_config(int, void *) to enable run-time extraction +of things that can be changed at compile time. The first argument specifies +what is wanted and the second points to where the information is to be placed. +The current list of available information is: + + PCRE_CONFIG_UTF8 + +The output is an integer that is set to one if UTF-8 support is available; +otherwise it is set to zero. + + PCRE_CONFIG_NEWLINE + +The output is an integer that it set to the value of the code that is used for +newline. It is either LF (10) or CR (13). + + PCRE_CONFIG_LINK_SIZE + +The output is an integer that contains the number of bytes used for internal +linkage in compiled expressions. The value is 2, 3, or 4. See item 32 above. + + PCRE_CONFIG_POSIX_MALLOC_THRESHOLD + +The output is an integer that contains the threshold above which the POSIX +interface uses malloc() for output vectors. See item 31 above. + + PCRE_CONFIG_MATCH_LIMIT + +The output is an unsigned integer that contains the default limit of the number +of match() calls in a pcre_exec() execution. See 42 above. + +44. pcretest has been upgraded by the addition of the -C option. This causes it +to extract all the available output from the new pcre_config() function, and to +output it. The program then exits immediately. + +45. A need has arisen to pass over additional data with calls to pcre_exec() in +order to support additional features. One way would have been to define +pcre_exec2() (for example) with extra arguments, but this would not have been +extensible, and would also have required all calls to the original function to +be mapped to the new one. Instead, I have chosen to extend the mechanism that +is used for passing in "extra" data from pcre_study(). + +The pcre_extra structure is now exposed and defined in pcre.h. It currently +contains the following fields: + + flags a bitmap indicating which of the following fields are set + study_data opaque data from pcre_study() + match_limit a way of specifying a limit on match() calls for a specific + call to pcre_exec() + callout_data data for callouts (see 49 below) + +The flag bits are also defined in pcre.h, and are + + PCRE_EXTRA_STUDY_DATA + PCRE_EXTRA_MATCH_LIMIT + PCRE_EXTRA_CALLOUT_DATA + +The pcre_study() function now returns one of these new pcre_extra blocks, with +the actual study data pointed to by the study_data field, and the +PCRE_EXTRA_STUDY_DATA flag set. This can be passed directly to pcre_exec() as +before. That is, this change is entirely upwards-compatible and requires no +change to existing code. + +If you want to pass in additional data to pcre_exec(), you can either place it +in a pcre_extra block provided by pcre_study(), or create your own pcre_extra +block. + +46. pcretest has been extended to test the PCRE_EXTRA_MATCH_LIMIT feature. If a +data string contains the escape sequence \M, pcretest calls pcre_exec() several +times with different match limits, until it finds the minimum value needed for +pcre_exec() to complete. The value is then output. This can be instructive; for +most simple matches the number is quite small, but for pathological cases it +gets very large very quickly. + +47. There's a new option for pcre_fullinfo() called PCRE_INFO_STUDYSIZE. It +returns the size of the data block pointed to by the study_data field in a +pcre_extra block, that is, the value that was passed as the argument to +pcre_malloc() when PCRE was getting memory in which to place the information +created by pcre_study(). The fourth argument should point to a size_t variable. +pcretest has been extended so that this information is shown after a successful +pcre_study() call when information about the compiled regex is being displayed. + +48. Cosmetic change to Makefile: there's no need to have / after $(DESTDIR) +because what follows is always an absolute path. (Later: it turns out that this +is more than cosmetic for MinGW, because it doesn't like empty path +components.) + +49. Some changes have been made to the callout feature (see 28 above): + +(i) A callout function now has three choices for what it returns: + + 0 => success, carry on matching + > 0 => failure at this point, but backtrack if possible + < 0 => serious error, return this value from pcre_exec() + + Negative values should normally be chosen from the set of PCRE_ERROR_xxx + values. In particular, returning PCRE_ERROR_NOMATCH forces a standard + "match failed" error. The error number PCRE_ERROR_CALLOUT is reserved for + use by callout functions. It will never be used by PCRE itself. + +(ii) The pcre_extra structure (see 45 above) has a void * field called + callout_data, with corresponding flag bit PCRE_EXTRA_CALLOUT_DATA. The + pcre_callout_block structure has a field of the same name. The contents of + the field passed in the pcre_extra structure are passed to the callout + function in the corresponding field in the callout block. This makes it + easier to use the same callout-containing regex from multiple threads. For + testing, the pcretest program has a new data escape + + \C*n pass the number n (may be negative) as callout_data + + If the callout function in pcretest receives a non-zero value as + callout_data, it returns that value. + +50. Makefile wasn't handling CFLAGS properly when compiling dftables. Also, +there were some redundant $(CFLAGS) in commands that are now specified as +$(LINK), which already includes $(CFLAGS). + +51. Extensions to UTF-8 support are listed below. These all apply when (a) PCRE +has been compiled with UTF-8 support *and* pcre_compile() has been compiled +with the PCRE_UTF8 flag. Patterns that are compiled without that flag assume +one-byte characters throughout. Note that case-insensitive matching applies +only to characters whose values are less than 256. PCRE doesn't support the +notion of cases for higher-valued characters. + +(i) A character class whose characters are all within 0-255 is handled as + a bit map, and the map is inverted for negative classes. Previously, a + character > 255 always failed to match such a class; however it should + match if the class was a negative one (e.g. [^ab]). This has been fixed. + +(ii) A negated character class with a single character < 255 is coded as + "not this character" (OP_NOT). This wasn't working properly when the test + character was multibyte, either singly or repeated. + +(iii) Repeats of multibyte characters are now handled correctly in UTF-8 + mode, for example: \x{100}{2,3}. + +(iv) The character escapes \b, \B, \d, \D, \s, \S, \w, and \W (either + singly or repeated) now correctly test multibyte characters. However, + PCRE doesn't recognize any characters with values greater than 255 as + digits, spaces, or word characters. Such characters always match \D, \S, + and \W, and never match \d, \s, or \w. + +(v) Classes may now contain characters and character ranges with values + greater than 255. For example: [ab\x{100}-\x{400}]. + +(vi) pcregrep now has a --utf-8 option (synonym -u) which makes it call + PCRE in UTF-8 mode. + +52. The info request value PCRE_INFO_FIRSTCHAR has been renamed +PCRE_INFO_FIRSTBYTE because it is a byte value. However, the old name is +retained for backwards compatibility. (Note that LASTLITERAL is also a byte +value.) + +53. The single man page has become too large. I have therefore split it up into +a number of separate man pages. These also give rise to individual HTML pages; +these are now put in a separate directory, and there is an index.html page that +lists them all. Some hyperlinking between the pages has been installed. + +54. Added convenience functions for handling named capturing parentheses. + +55. Unknown escapes inside character classes (e.g. [\M]) and escapes that +aren't interpreted therein (e.g. [\C]) are literals in Perl. This is now also +true in PCRE, except when the PCRE_EXTENDED option is set, in which case they +are faulted. + +56. Introduced HOST_CC and HOST_CFLAGS which can be set in the environment when +calling configure. These values are used when compiling the dftables.c program +which is run to generate the source of the default character tables. They +default to the values of CC and CFLAGS. If you are cross-compiling PCRE, +you will need to set these values. + +57. Updated the building process for Windows DLL, as provided by Fred Cox. + + +Version 3.9 02-Jan-02 +--------------------- + +1. A bit of extraneous text had somehow crept into the pcregrep documentation. + +2. If --disable-static was given, the building process failed when trying to +build pcretest and pcregrep. (For some reason it was using libtool to compile +them, which is not right, as they aren't part of the library.) + + +Version 3.8 18-Dec-01 +--------------------- + +1. The experimental UTF-8 code was completely screwed up. It was packing the +bytes in the wrong order. How dumb can you get? + + +Version 3.7 29-Oct-01 +--------------------- + +1. In updating pcretest to check change 1 of version 3.6, I screwed up. +This caused pcretest, when used on the test data, to segfault. Unfortunately, +this didn't happen under Solaris 8, where I normally test things. + +2. The Makefile had to be changed to make it work on BSD systems, where 'make' +doesn't seem to recognize that ./xxx and xxx are the same file. (This entry +isn't in ChangeLog distributed with 3.7 because I forgot when I hastily made +this fix an hour or so after the initial 3.7 release.) + + +Version 3.6 23-Oct-01 +--------------------- + +1. Crashed with /(sens|respons)e and \1ibility/ and "sense and sensibility" if +offsets passed as NULL with zero offset count. + +2. The config.guess and config.sub files had not been updated when I moved to +the latest autoconf. + + +Version 3.5 15-Aug-01 +--------------------- + +1. Added some missing #if !defined NOPOSIX conditionals in pcretest.c that +had been forgotten. + +2. By using declared but undefined structures, we can avoid using "void" +definitions in pcre.h while keeping the internal definitions of the structures +private. + +3. The distribution is now built using autoconf 2.50 and libtool 1.4. From a +user point of view, this means that both static and shared libraries are built +by default, but this can be individually controlled. More of the work of +handling this static/shared cases is now inside libtool instead of PCRE's make +file. + +4. The pcretest utility is now installed along with pcregrep because it is +useful for users (to test regexs) and by doing this, it automatically gets +relinked by libtool. The documentation has been turned into a man page, so +there are now .1, .txt, and .html versions in /doc. + +5. Upgrades to pcregrep: + (i) Added long-form option names like gnu grep. + (ii) Added --help to list all options with an explanatory phrase. + (iii) Added -r, --recursive to recurse into sub-directories. + (iv) Added -f, --file to read patterns from a file. + +6. pcre_exec() was referring to its "code" argument before testing that +argument for NULL (and giving an error if it was NULL). + +7. Upgraded Makefile.in to allow for compiling in a different directory from +the source directory. + +8. Tiny buglet in pcretest: when pcre_fullinfo() was called to retrieve the +options bits, the pointer it was passed was to an int instead of to an unsigned +long int. This mattered only on 64-bit systems. + +9. Fixed typo (3.4/1) in pcre.h again. Sigh. I had changed pcre.h (which is +generated) instead of pcre.in, which it its source. Also made the same change +in several of the .c files. + +10. A new release of gcc defines printf() as a macro, which broke pcretest +because it had an ifdef in the middle of a string argument for printf(). Fixed +by using separate calls to printf(). + +11. Added --enable-newline-is-cr and --enable-newline-is-lf to the configure +script, to force use of CR or LF instead of \n in the source. On non-Unix +systems, the value can be set in config.h. + +12. The limit of 200 on non-capturing parentheses is a _nesting_ limit, not an +absolute limit. Changed the text of the error message to make this clear, and +likewise updated the man page. + +13. The limit of 99 on the number of capturing subpatterns has been removed. +The new limit is 65535, which I hope will not be a "real" limit. + + +Version 3.4 22-Aug-00 +--------------------- + +1. Fixed typo in pcre.h: unsigned const char * changed to const unsigned char *. + +2. Diagnose condition (?(0) as an error instead of crashing on matching. + + +Version 3.3 01-Aug-00 +--------------------- + +1. If an octal character was given, but the value was greater than \377, it +was not getting masked to the least significant bits, as documented. This could +lead to crashes in some systems. + +2. Perl 5.6 (if not earlier versions) accepts classes like [a-\d] and treats +the hyphen as a literal. PCRE used to give an error; it now behaves like Perl. + +3. Added the functions pcre_free_substring() and pcre_free_substring_list(). +These just pass their arguments on to (pcre_free)(), but they are provided +because some uses of PCRE bind it to non-C systems that can call its functions, +but cannot call free() or pcre_free() directly. + +4. Add "make test" as a synonym for "make check". Corrected some comments in +the Makefile. + +5. Add $(DESTDIR)/ in front of all the paths in the "install" target in the +Makefile. + +6. Changed the name of pgrep to pcregrep, because Solaris has introduced a +command called pgrep for grepping around the active processes. + +7. Added the beginnings of support for UTF-8 character strings. + +8. Arranged for the Makefile to pass over the settings of CC, CFLAGS, and +RANLIB to ./ltconfig so that they are used by libtool. I think these are all +the relevant ones. (AR is not passed because ./ltconfig does its own figuring +out for the ar command.) + + +Version 3.2 12-May-00 +--------------------- + +This is purely a bug fixing release. + +1. If the pattern /((Z)+|A)*/ was matched agained ZABCDEFG it matched Z instead +of ZA. This was just one example of several cases that could provoke this bug, +which was introduced by change 9 of version 2.00. The code for breaking +infinite loops after an iteration that matches an empty string was't working +correctly. + +2. The pcretest program was not imitating Perl correctly for the pattern /a*/g +when matched against abbab (for example). After matching an empty string, it +wasn't forcing anchoring when setting PCRE_NOTEMPTY for the next attempt; this +caused it to match further down the string than it should. + +3. The code contained an inclusion of sys/types.h. It isn't clear why this +was there because it doesn't seem to be needed, and it causes trouble on some +systems, as it is not a Standard C header. It has been removed. + +4. Made 4 silly changes to the source to avoid stupid compiler warnings that +were reported on the Macintosh. The changes were from + + while ((c = *(++ptr)) != 0 && c != '\n'); +to + while ((c = *(++ptr)) != 0 && c != '\n') ; + +Totally extraordinary, but if that's what it takes... + +5. PCRE is being used in one environment where neither memmove() nor bcopy() is +available. Added HAVE_BCOPY and an autoconf test for it; if neither +HAVE_MEMMOVE nor HAVE_BCOPY is set, use a built-in emulation function which +assumes the way PCRE uses memmove() (always moving upwards). + +6. PCRE is being used in one environment where strchr() is not available. There +was only one use in pcre.c, and writing it out to avoid strchr() probably gives +faster code anyway. + + +Version 3.2 12-May-00 +--------------------- + +This is purely a bug fixing release. + +1. If the pattern /((Z)+|A)*/ was matched agained ZABCDEFG it matched Z instead +of ZA. This was just one example of several cases that could provoke this bug, +which was introduced by change 9 of version 2.00. The code for breaking +infinite loops after an iteration that matches an empty string was't working +correctly. + +2. The pcretest program was not imitating Perl correctly for the pattern /a*/g +when matched against abbab (for example). After matching an empty string, it +wasn't forcing anchoring when setting PCRE_NOTEMPTY for the next attempt; this +caused it to match further down the string than it should. + +3. The code contained an inclusion of sys/types.h. It isn't clear why this +was there because it doesn't seem to be needed, and it causes trouble on some +systems, as it is not a Standard C header. It has been removed. + +4. Made 4 silly changes to the source to avoid stupid compiler warnings that +were reported on the Macintosh. The changes were from + + while ((c = *(++ptr)) != 0 && c != '\n'); +to + while ((c = *(++ptr)) != 0 && c != '\n') ; + +Totally extraordinary, but if that's what it takes... + +5. PCRE is being used in one environment where neither memmove() nor bcopy() is +available. Added HAVE_BCOPY and an autoconf test for it; if neither +HAVE_MEMMOVE nor HAVE_BCOPY is set, use a built-in emulation function which +assumes the way PCRE uses memmove() (always moving upwards). + +6. PCRE is being used in one environment where strchr() is not available. There +was only one use in pcre.c, and writing it out to avoid strchr() probably gives +faster code anyway. + + +Version 3.1 09-Feb-00 +--------------------- + +The only change in this release is the fixing of some bugs in Makefile.in for +the "install" target: + +(1) It was failing to install pcreposix.h. + +(2) It was overwriting the pcre.3 man page with the pcreposix.3 man page. + + +Version 3.0 01-Feb-00 +--------------------- + +1. Add support for the /+ modifier to perltest (to output $` like it does in +pcretest). + +2. Add support for the /g modifier to perltest. + +3. Fix pcretest so that it behaves even more like Perl for /g when the pattern +matches null strings. + +4. Fix perltest so that it doesn't do unwanted things when fed an empty +pattern. Perl treats empty patterns specially - it reuses the most recent +pattern, which is not what we want. Replace // by /(?#)/ in order to avoid this +effect. + +5. The POSIX interface was broken in that it was just handing over the POSIX +captured string vector to pcre_exec(), but (since release 2.00) PCRE has +required a bigger vector, with some working space on the end. This means that +the POSIX wrapper now has to get and free some memory, and copy the results. + +6. Added some simple autoconf support, placing the test data and the +documentation in separate directories, re-organizing some of the +information files, and making it build pcre-config (a GNU standard). Also added +libtool support for building PCRE as a shared library, which is now the +default. + +7. Got rid of the leading zero in the definition of PCRE_MINOR because 08 and +09 are not valid octal constants. Single digits will be used for minor values +less than 10. + +8. Defined REG_EXTENDED and REG_NOSUB as zero in the POSIX header, so that +existing programs that set these in the POSIX interface can use PCRE without +modification. + +9. Added a new function, pcre_fullinfo() with an extensible interface. It can +return all that pcre_info() returns, plus additional data. The pcre_info() +function is retained for compatibility, but is considered to be obsolete. + +10. Added experimental recursion feature (?R) to handle one common case that +Perl 5.6 will be able to do with (?p{...}). + +11. Added support for POSIX character classes like [:alpha:], which Perl is +adopting. + + +Version 2.08 31-Aug-99 +---------------------- + +1. When startoffset was not zero and the pattern began with ".*", PCRE was not +trying to match at the startoffset position, but instead was moving forward to +the next newline as if a previous match had failed. + +2. pcretest was not making use of PCRE_NOTEMPTY when repeating for /g and /G, +and could get into a loop if a null string was matched other than at the start +of the subject. + +3. Added definitions of PCRE_MAJOR and PCRE_MINOR to pcre.h so the version can +be distinguished at compile time, and for completeness also added PCRE_DATE. + +5. Added Paul Sokolovsky's minor changes to make it easy to compile a Win32 DLL +in GnuWin32 environments. + + +Version 2.07 29-Jul-99 +---------------------- + +1. The documentation is now supplied in plain text form and HTML as well as in +the form of man page sources. + +2. C++ compilers don't like assigning (void *) values to other pointer types. +In particular this affects malloc(). Although there is no problem in Standard +C, I've put in casts to keep C++ compilers happy. + +3. Typo on pcretest.c; a cast of (unsigned char *) in the POSIX regexec() call +should be (const char *). + +4. If NOPOSIX is defined, pcretest.c compiles without POSIX support. This may +be useful for non-Unix systems who don't want to bother with the POSIX stuff. +However, I haven't made this a standard facility. The documentation doesn't +mention it, and the Makefile doesn't support it. + +5. The Makefile now contains an "install" target, with editable destinations at +the top of the file. The pcretest program is not installed. + +6. pgrep -V now gives the PCRE version number and date. + +7. Fixed bug: a zero repetition after a literal string (e.g. /abcde{0}/) was +causing the entire string to be ignored, instead of just the last character. + +8. If a pattern like /"([^\\"]+|\\.)*"/ is applied in the normal way to a +non-matching string, it can take a very, very long time, even for strings of +quite modest length, because of the nested recursion. PCRE now does better in +some of these cases. It does this by remembering the last required literal +character in the pattern, and pre-searching the subject to ensure it is present +before running the real match. In other words, it applies a heuristic to detect +some types of certain failure quickly, and in the above example, if presented +with a string that has no trailing " it gives "no match" very quickly. + +9. A new runtime option PCRE_NOTEMPTY causes null string matches to be ignored; +other alternatives are tried instead. + + +Version 2.06 09-Jun-99 +---------------------- + +1. Change pcretest's output for amount of store used to show just the code +space, because the remainder (the data block) varies in size between 32-bit and +64-bit systems. + +2. Added an extra argument to pcre_exec() to supply an offset in the subject to +start matching at. This allows lookbehinds to work when searching for multiple +occurrences in a string. + +3. Added additional options to pcretest for testing multiple occurrences: + + /+ outputs the rest of the string that follows a match + /g loops for multiple occurrences, using the new startoffset argument + /G loops for multiple occurrences by passing an incremented pointer + +4. PCRE wasn't doing the "first character" optimization for patterns starting +with \b or \B, though it was doing it for other lookbehind assertions. That is, +it wasn't noticing that a match for a pattern such as /\bxyz/ has to start with +the letter 'x'. On long subject strings, this gives a significant speed-up. + + +Version 2.05 21-Apr-99 +---------------------- + +1. Changed the type of magic_number from int to long int so that it works +properly on 16-bit systems. + +2. Fixed a bug which caused patterns starting with .* not to work correctly +when the subject string contained newline characters. PCRE was assuming +anchoring for such patterns in all cases, which is not correct because .* will +not pass a newline unless PCRE_DOTALL is set. It now assumes anchoring only if +DOTALL is set at top level; otherwise it knows that patterns starting with .* +must be retried after every newline in the subject. + + +Version 2.04 18-Feb-99 +---------------------- + +1. For parenthesized subpatterns with repeats whose minimum was zero, the +computation of the store needed to hold the pattern was incorrect (too large). +If such patterns were nested a few deep, this could multiply and become a real +problem. + +2. Added /M option to pcretest to show the memory requirement of a specific +pattern. Made -m a synonym of -s (which does this globally) for compatibility. + +3. Subpatterns of the form (regex){n,m} (i.e. limited maximum) were being +compiled in such a way that the backtracking after subsequent failure was +pessimal. Something like (a){0,3} was compiled as (a)?(a)?(a)? instead of +((a)((a)(a)?)?)? with disastrous performance if the maximum was of any size. + + +Version 2.03 02-Feb-99 +---------------------- + +1. Fixed typo and small mistake in man page. + +2. Added 4th condition (GPL supersedes if conflict) and created separate +LICENCE file containing the conditions. + +3. Updated pcretest so that patterns such as /abc\/def/ work like they do in +Perl, that is the internal \ allows the delimiter to be included in the +pattern. Locked out the use of \ as a delimiter. If \ immediately follows +the final delimiter, add \ to the end of the pattern (to test the error). + +4. Added the convenience functions for extracting substrings after a successful +match. Updated pcretest to make it able to test these functions. + + +Version 2.02 14-Jan-99 +---------------------- + +1. Initialized the working variables associated with each extraction so that +their saving and restoring doesn't refer to uninitialized store. + +2. Put dummy code into study.c in order to trick the optimizer of the IBM C +compiler for OS/2 into generating correct code. Apparently IBM isn't going to +fix the problem. + +3. Pcretest: the timing code wasn't using LOOPREPEAT for timing execution +calls, and wasn't printing the correct value for compiling calls. Increased the +default value of LOOPREPEAT, and the number of significant figures in the +times. + +4. Changed "/bin/rm" in the Makefile to "-rm" so it works on Windows NT. + +5. Renamed "deftables" as "dftables" to get it down to 8 characters, to avoid +a building problem on Windows NT with a FAT file system. + + +Version 2.01 21-Oct-98 +---------------------- + +1. Changed the API for pcre_compile() to allow for the provision of a pointer +to character tables built by pcre_maketables() in the current locale. If NULL +is passed, the default tables are used. + + +Version 2.00 24-Sep-98 +---------------------- + +1. Since the (>?) facility is in Perl 5.005, don't require PCRE_EXTRA to enable +it any more. + +2. Allow quantification of (?>) groups, and make it work correctly. + +3. The first character computation wasn't working for (?>) groups. + +4. Correct the implementation of \Z (it is permitted to match on the \n at the +end of the subject) and add 5.005's \z, which really does match only at the +very end of the subject. + +5. Remove the \X "cut" facility; Perl doesn't have it, and (?> is neater. + +6. Remove the ability to specify CASELESS, MULTILINE, DOTALL, and +DOLLAR_END_ONLY at runtime, to make it possible to implement the Perl 5.005 +localized options. All options to pcre_study() were also removed. + +7. Add other new features from 5.005: + + $(?<= positive lookbehind + $(?a*))*/ (a PCRE_EXTRA facility). + + +Version 1.00 18-Nov-97 +---------------------- + +1. Added compile-time macros to support systems such as SunOS4 which don't have +memmove() or strerror() but have other things that can be used instead. + +2. Arranged that "make clean" removes the executables. + + +Version 0.99 27-Oct-97 +---------------------- + +1. Fixed bug in code for optimizing classes with only one character. It was +initializing a 32-byte map regardless, which could cause it to run off the end +of the memory it had got. + +2. Added, conditional on PCRE_EXTRA, the proposed (?>REGEX) construction. + + +Version 0.98 22-Oct-97 +---------------------- + +1. Fixed bug in code for handling temporary memory usage when there are more +back references than supplied space in the ovector. This could cause segfaults. + + +Version 0.97 21-Oct-97 +---------------------- + +1. Added the \X "cut" facility, conditional on PCRE_EXTRA. + +2. Optimized negated single characters not to use a bit map. + +3. Brought error texts together as macro definitions; clarified some of them; +fixed one that was wrong - it said "range out of order" when it meant "invalid +escape sequence". + +4. Changed some char * arguments to const char *. + +5. Added PCRE_NOTBOL and PCRE_NOTEOL (from POSIX). + +6. Added the POSIX-style API wrapper in pcreposix.a and testing facilities in +pcretest. + + +Version 0.96 16-Oct-97 +---------------------- + +1. Added a simple "pgrep" utility to the distribution. + +2. Fixed an incompatibility with Perl: "{" is now treated as a normal character +unless it appears in one of the precise forms "{ddd}", "{ddd,}", or "{ddd,ddd}" +where "ddd" means "one or more decimal digits". + +3. Fixed serious bug. If a pattern had a back reference, but the call to +pcre_exec() didn't supply a large enough ovector to record the related +identifying subpattern, the match always failed. PCRE now remembers the number +of the largest back reference, and gets some temporary memory in which to save +the offsets during matching if necessary, in order to ensure that +backreferences always work. + +4. Increased the compatibility with Perl in a number of ways: + + (a) . no longer matches \n by default; an option PCRE_DOTALL is provided + to request this handling. The option can be set at compile or exec time. + + (b) $ matches before a terminating newline by default; an option + PCRE_DOLLAR_ENDONLY is provided to override this (but not in multiline + mode). The option can be set at compile or exec time. + + (c) The handling of \ followed by a digit other than 0 is now supposed to be + the same as Perl's. If the decimal number it represents is less than 10 + or there aren't that many previous left capturing parentheses, an octal + escape is read. Inside a character class, it's always an octal escape, + even if it is a single digit. + + (d) An escaped but undefined alphabetic character is taken as a literal, + unless PCRE_EXTRA is set. Currently this just reserves the remaining + escapes. + + (e) {0} is now permitted. (The previous item is removed from the compiled + pattern). + +5. Changed all the names of code files so that the basic parts are no longer +than 10 characters, and abolished the teeny "globals.c" file. + +6. Changed the handling of character classes; they are now done with a 32-byte +bit map always. + +7. Added the -d and /D options to pcretest to make it possible to look at the +internals of compilation without having to recompile pcre. + + +Version 0.95 23-Sep-97 +---------------------- + +1. Fixed bug in pre-pass concerning escaped "normal" characters such as \x5c or +\x20 at the start of a run of normal characters. These were being treated as +real characters, instead of the source characters being re-checked. + + +Version 0.94 18-Sep-97 +---------------------- + +1. The functions are now thread-safe, with the caveat that the global variables +containing pointers to malloc() and free() or alternative functions are the +same for all threads. + +2. Get pcre_study() to generate a bitmap of initial characters for non- +anchored patterns when this is possible, and use it if passed to pcre_exec(). + + +Version 0.93 15-Sep-97 +---------------------- + +1. /(b)|(:+)/ was computing an incorrect first character. + +2. Add pcre_study() to the API and the passing of pcre_extra to pcre_exec(), +but not actually doing anything yet. + +3. Treat "-" characters in classes that cannot be part of ranges as literals, +as Perl does (e.g. [-az] or [az-]). + +4. Set the anchored flag if a branch starts with .* or .*? because that tests +all possible positions. + +5. Split up into different modules to avoid including unneeded functions in a +compiled binary. However, compile and exec are still in one module. The "study" +function is split off. + +6. The character tables are now in a separate module whose source is generated +by an auxiliary program - but can then be edited by hand if required. There are +now no calls to isalnum(), isspace(), isdigit(), isxdigit(), tolower() or +toupper() in the code. + +7. Turn the malloc/free funtions variables into pcre_malloc and pcre_free and +make them global. Abolish the function for setting them, as the caller can now +set them directly. + + +Version 0.92 11-Sep-97 +---------------------- + +1. A repeat with a fixed maximum and a minimum of 1 for an ordinary character +(e.g. /a{1,3}/) was broken (I mis-optimized it). + +2. Caseless matching was not working in character classes if the characters in +the pattern were in upper case. + +3. Make ranges like [W-c] work in the same way as Perl for caseless matching. + +4. Make PCRE_ANCHORED public and accept as a compile option. + +5. Add an options word to pcre_exec() and accept PCRE_ANCHORED and +PCRE_CASELESS at run time. Add escapes \A and \I to pcretest to cause it to +pass them. + +6. Give an error if bad option bits passed at compile or run time. + +7. Add PCRE_MULTILINE at compile and exec time, and (?m) as well. Add \M to +pcretest to cause it to pass that flag. + +8. Add pcre_info(), to get the number of identifying subpatterns, the stored +options, and the first character, if set. + +9. Recognize C+ or C{n,m} where n >= 1 as providing a fixed starting character. + + +Version 0.91 10-Sep-97 +---------------------- + +1. PCRE was failing to diagnose unlimited repeats of subpatterns that could +match the empty string as in /(a*)*/. It was looping and ultimately crashing. + +2. PCRE was looping on encountering an indefinitely repeated back reference to +a subpattern that had matched an empty string, e.g. /(a|)\1*/. It now does what +Perl does - treats the match as successful. + +**** -- cgit 1.2.3-korg