From 5ba5768eee759f9d09d20a2fe6af6b4fe9463d54 Mon Sep 17 00:00:00 2001 From: Gerard Damm Date: Thu, 3 May 2018 21:07:00 -0500 Subject: automated configuration of an OpenStack instance for ONAP Initial code (based on OpenStack SDK Python client) for configuring an OpenStack instance (e.g. installed by Fuel/MCP) and prepare it for ONAP (especially, to host VM-based VNFs). Currently works: creation of networks, routers, router interfaces, security groups (accessing VMs also works with compute proxy, but is not used for this program). Current issues: identity proxy (so can't create projects and users), adding gateway to router, deletions This script could be launched automatically right after installing OpenStack, and before installing ONAP (so as to grab OpenStack info to be fed into ONAP configuration files). Also, VNF YAML/ENV files can be populated once the OpenStack instance is ready for ONAP. Note: plenty of test and debug lines, which would be removed. This changeset is just to capture a snapshot of this effort in the Auto repository, and to enable reviews and feedback. Change-Id: If3b69b5a9a45905455db3a4eae0c6b336ce7447b Signed-off-by: Gerard Damm --- .../auto_script_config_openstack_for_onap.py | 664 +++++++++++++++++++++ 1 file changed, 664 insertions(+) create mode 100644 setup/VIMs/OpenStack/auto_script_config_openstack_for_onap.py (limited to 'setup') diff --git a/setup/VIMs/OpenStack/auto_script_config_openstack_for_onap.py b/setup/VIMs/OpenStack/auto_script_config_openstack_for_onap.py new file mode 100644 index 0000000..88ba037 --- /dev/null +++ b/setup/VIMs/OpenStack/auto_script_config_openstack_for_onap.py @@ -0,0 +1,664 @@ +#!/usr/bin/env python3 + +# ===============LICENSE_START======================================================= +# Apache-2.0 +# =================================================================================== +# Copyright (C) 2018 Wipro. All rights reserved. +# =================================================================================== +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# ===============LICENSE_END========================================================= + + +# OPNFV Auto project +# https://wiki.opnfv.org/pages/viewpage.action?pageId=12389095 + +#docstring +"""This script configures an OpenStack instance to make it ready to interface with an ONAP instance, for example to host VM-based VNFs deployed by ONAP. +Auto project: https://wiki.opnfv.org/pages/viewpage.action?pageId=12389095 +""" + +###################################################################### +# This script configures an OpenStack instance (e.g. from an OPNFV installer like FUEL/MCP) to make it +# ready to interface with an ONAP instance, for example to host VM-based VNFs deployed by ONAP. +# After running this script, the created OpenStack object names/IDs can be used for example to populate +# YAML&ENV files used by ONAP (installation of ONAP itself, VNF descriptor files, etc.). + + +###################################################################### +# Overview of the steps: +# +# 1) create an ONAP project/tenant (a tenant is a project; project is a more generic term than tenant) +# (optional, probably not needed: create a new group, which can be associated to a project, and contains users) +# 2) create an ONAP user within the ONAP project, so as not to use the "admin" user for ONAP +# (associate user to group if applicable; credentials: name/pwd or name/APIkey, or token) +# 3) create an ONAP security group, to allow ICMP traffic (for pings) and TCP port 22 (for SSH), rather than changing default security group(s) +# (optional, probably not needed: create new region) +# 4a) create a public network for ONAP VNFs, with ports, subnet, and CIDR block +# (or maybe not necessary? floating_net serves as public/external network and provides pool of floating IP@) +# 4b) create an OAM network for ONAP VNFs, with ports, subnet, and CIDR block +# (ONAP VNFs will be deployed in this OMA/private network, which will be connected by router to an external network) +# 5) create an OpenStack router, with an interface to the OAM/private network (and one to the public network?) +# and a reference to an external network (gateway) +# 6) create VM flavors as needed: m1.medium, etc. +# 7) download images, as needed for ONAP-deployed VNFs: e.g. Ubuntu 14.04, 16.04, ... + + +###################################################################### +# Assumptions: +# - python3 is installed +# - OpenStack SDK is installed for python3 +# - there is a clouds.yaml file (describing the OpenStack instance, especially the Auth URL and admin credentials) +# - the script connects to OpenStack as a user with admin rights + +# typical commands to install OpenStack SDK Python client: +# apt install python3-pip +# pip3 install --upgrade pip +# pip3 list +# pip3 install openstacksdk +# pip3 install --upgrade openstacksdk +# pip3 show openstacksdk +# pip3 check + + +###################################################################### +# useful URLs +# Identity API: https://docs.openstack.org/openstacksdk/latest/user/proxies/identity_v3.html +# (User, Project, Group, region, Role, ...) +# Network API: https://docs.openstack.org/openstacksdk/latest/user/proxies/network.html +# (Network, Subnet, Port, Router, Floating IP, AZ, Flavor, ...) + + +###################################################################### +# script parameters +ONAP_USER_NAME = 'onap_user' +ONAP_USER_PASSWORD = 'auto_topsecret' +ONAP_USER_DESC = 'OpenStack User created for ONAP' + +ONAP_TENANT_NAME = 'onap_tenant' # "project" is a more generic concept than "tenant"; a tenant is type of project +ONAP_TENANT_DESC = 'OpenStack Project/Tenant created for ONAP' + +ONAP_SECU_GRP_NAME = 'ONAP security group' +ONAP_SECU_GRP_DESC = 'Security Group for ONAP' + +ONAP_PUBLIC_NET_NAME = 'onap_public_net' +ONAP_PUBLIC_SUBNET_NAME = 'onap_public_subnet' +ONAP_PUBLIC_SUBNET_CIDR = '10.0.0.0/16' +ONAP_PUBLIC_NET_DESC = 'Public network created for ONAP' + +ONAP_OAM_NET_NAME = 'onap_oam_net' +ONAP_OAM_SUBNET_NAME = 'onap_oam_subnet' +ONAP_OAM_SUBNET_CIDR = '192.168.30.0/24' +ONAP_OAM_NET_DESC = 'OAM network created for ONAP' + +ONAP_ROUTER_NAME = 'onap_router' +ONAP_ROUTER_DESC = 'Router created for ONAP' + +EXTERNAL_NETWORK_NAME = 'floating_net' # external network (gateway) name to be used in OpenStack instance + +# OpenStack cloud name and region name, which should be the same as in the clouds.yaml file used by this script +OPENSTACK_CLOUD_NAME = 'hpe16openstackFraser' +OPENSTACK_REGION_NAME = 'RegionOne' +# OpenStack domain is: Default + + +###################################################################### +# constants which could be parameters +DNS_SERVER_IP = '8.8.8.8' +# IP addresses of free public DNS service from Google: +# - IPv4: 8.8.8.8 and 8.8.4.4 +# - IPv6: 2001:4860:4860::8888 and 2001:4860:4860::8844 + + +###################################################################### +# import statements +import openstack +import argparse + + +###################################################################### +def delete_all_ONAP(): + """Delete all ONAP-specific OpenStack objects (normally not needed, but may be useful during tests).""" + print("\nOPNFV Auto, script to delete ONAP objects in an OpenStack instance") + + try: + # connect to OpenStack instance using Connection object from OpenStack SDK + conn = openstack.connect(cloud=OPENSTACK_CLOUD_NAME, region_name=OPENSTACK_REGION_NAME) + + # delete router; must delete router before networks. + onap_router = conn.network.find_router(ONAP_ROUTER_NAME) + print('DEBUG onap_router:\n',onap_router,'\n\n') + if onap_router != None: + print('Deleting ONAP router...') + conn.network.delete_router(onap_router.id) + else: + print('No ONAP router found...') + + # delete OAM network (which should also delete associated subnet and ports if any) + oam_network = conn.network.find_network(ONAP_OAM_NET_NAME) + print('DEBUG oam_network:\n',oam_network,'\n\n') + if oam_network != None: + print('Deleting ONAP OAM network...') + conn.network.delete_network(oam_network.id) + else: + print('No ONAP OAM network found...') + + # delete public network (which should also delete associated subnet and ports if any) + public_network = conn.network.find_network(ONAP_PUBLIC_NET_NAME) + print('DEBUG public_network:\n',public_network,'\n\n') + if public_network != None: + print('Deleting ONAP public network...') + conn.network.delete_network(public_network.id) + else: + print('No ONAP public network found...') + + # delete security group + onap_security_group = conn.network.find_security_group(ONAP_SECU_GRP_NAME) + print('DEBUG onap_security_group:\n',onap_security_group,'\n\n') + if onap_security_group != None: + print('Deleting ONAP security group...') + conn.network.delete_security_group(onap_security_group.id) + else: + print('No ONAP security group found...') + + # # delete user + # onap_user = conn.identity.find_user(ONAP_USER_NAME) + # if onap_user != None: + # print('Deleting ONAP user...') + # conn.identity.delete_user(onap_user.id) + # else: + # print('No ONAP user found...') + + # # delete project/tenant + # onap_project = conn.identity.find_project(ONAP_TENANT_NAME) + # if onap_project != None: + # print('Deleting ONAP project...') + # conn.identity.delete_project(onap_project.id) + # else: + # print('No ONAP project found...') + + except Exception as e: + print("Exception:",type(e), e) + print("[Script terminated]\n") + + print("OPNFV Auto, end of deletion script\n") + + +###################################################################### +def configure_all_ONAP(): + """Configure all ONAP-specific OpenStack objects.""" + print("\nOPNFV Auto, script to configure an OpenStack instance for ONAP") + + try: + # connect to OpenStack instance using Connection object from OpenStack SDK + print('Opening connection...') + conn = openstack.connect(cloud=OPENSTACK_CLOUD_NAME, region_name=OPENSTACK_REGION_NAME) + + + # TESTS: IGNORE/DELETE (BEGIN) + # gdserver_ID = '8bc274a2-8c0d-4795-9b4d-faa0a21e1d88' + # gdserver = conn.compute.get_server(gdserver_ID) + # print('\ngdserver.name=',gdserver.name) + # print('gdserver.status=',gdserver.status) + + # # print("\nList Users:") + # # i=1 + # # for user in conn.identity.users(): + # # print('User',str(i),'\n',user,'\n') + # # i+=1 + + # # print("\nList Projects:") + # # i=1 + # # for project in conn.identity.projects(): + # # print('Project',str(i),'\n',project,'\n') + # # i+=1 + + # print("\nList Networks:") + # i=1 + # for network in conn.network.networks(): + # print('Network',str(i),'\n',network,'\n') + # i+=1 + + # print("\nList Flavors:") + # i=1 + # for flvr in conn.compute.flavors(): + # print('Flavor',str(i),'\n',flvr,'\n') + # i+=1 + + # print("\nList Images:") + # i=1 + # for img in conn.compute.images(): + # print('Image',str(i),'\n',img,'\n') + # i+=1 + + # router = conn.network.find_router('gd_test_router') + # print('gd router\n',router,'\n\n') + # router = conn.network.find_router('e4e59f63-8063-4774-a97a-c110c6969e4a') + # print('gd router\n',router,'\n\n') + # TESTS: IGNORE/DELETE (END) + + + + # TODO: find out why conn.identity does not exist @@@ + # onap_project = conn.identity.find_project(ONAP_TENANT_NAME) + # if onap_project != None: + # print('ONAP project/tenant already exists') + # else: + # print('Creating ONAP project/tenant...') + # onap_project = conn.identity.create_project( + # name = ONAP_TENANT_NAME, + # description = ONAP_TENANT_DESC, + # is_enabled = True) + # # domain: leave default + # # project quotas (max #vCPUs, #instances, etc.): as conn.network.<*quota*>, using project id for quota id + # # https://docs.openstack.org/openstacksdk/latest/user/proxies/network.html#quota-operations + # # https://docs.openstack.org/openstacksdk/latest/user/resources/network/v2/quota.html#openstack.network.v2.quota.Quota + # # conn.network.update_quota(project_id = onap_project.id) + # # SDK for quotas supports floating_ips, networks, ports, etc. but not vCPUs or instances + # print('DEBUG onap_project:\n',onap_project,'\n\n') + + # onap_user= conn.identity.find_user(ONAP_USER_NAME) + # if onap_user != None: + # print('ONAP user already exists') + # else: + # print('Creating ONAP user...') + # onap_user = conn.identity.create_user( + # name = ONAP_USER_NAME, + # description = ONAP_USER_DESC, + # default_project_id = onap_project.id, + # password = ONAP_USER_PASSWORD, + # is_enabled = True) + # # domain: leave default + # # default_project_id: primary project + # print('DEBUG onap_user:\n',onap_user,'\n\n') + + + + # make sure security group allows ICMP (for ping) and SSH (TCP port 22) traffic; also IPv4/v6 traffic ingress and egress + # create new onap_security_group (or maybe just "default" security group ? tests returned multiple "default" security groups) + # security group examples: check http://git.openstack.org/cgit/openstack/openstacksdk/tree/examples/network/security_group_rules.py + # if rule already exists, OpenStack returns an error, so just try (no harm); try each separately + onap_security_group = conn.network.find_security_group(ONAP_SECU_GRP_NAME) + if onap_security_group == None: + onap_security_group = conn.network.create_security_group( + # project_id = onap_project.id, + description = ONAP_SECU_GRP_DESC, + name = ONAP_SECU_GRP_NAME) + else: + print('ONAP security group already exists') + print('DEBUG onap_security_group:\n',onap_security_group,'\n\n') + + try: + description_text = 'enable ICMP ingress IPv4' + print('Creating rule:',description_text,'...') + conn.network.create_security_group_rule( + security_group_id = onap_security_group.id, + description = description_text, + protocol = 'ICMP', + direction = 'ingress', + ethertype = 'IPv4', + remote_ip_prefix = '0.0.0.0/0', + port_range_min = None, + port_range_max = None) + except Exception as e: + print(description_text, ' Exception:', type(e), e) + + try: + description_text = 'enable ICMP egress IPv4' + print('Creating rule:',description_text,'...') + conn.network.create_security_group_rule( + security_group_id = onap_security_group.id, + description = description_text, + protocol = 'ICMP', + direction = 'egress', + ethertype = 'IPv4', + remote_ip_prefix = '0.0.0.0/0', + port_range_min = None, + port_range_max = None) + except Exception as e: + print(description_text, ' Exception:', type(e), e) + + try: + description_text = 'enable SSH (TCP port 22) ingress IPv4' + print('Creating rule:',description_text,'...') + conn.network.create_security_group_rule( + security_group_id = onap_security_group.id, + description = description_text, + protocol = 'TCP', + direction = 'ingress', + ethertype = 'IPv4', + remote_ip_prefix = '0.0.0.0/0', + port_range_min = '22', + port_range_max = '22') + except Exception as e: + print(description_text, ' Exception:', type(e), e) + + try: + description_text = 'enable SSH (TCP port 22) egress IPv4' + print('Creating rule:',description_text,'...') + conn.network.create_security_group_rule( + security_group_id = onap_security_group.id, + description = description_text, + protocol = 'TCP', + direction = 'egress', + ethertype = 'IPv4', + remote_ip_prefix = '0.0.0.0/0', + port_range_min = '22', + port_range_max = '22') + except Exception as e: + print(description_text, ' Exception:', type(e), e) + + try: + description_text = 'enable IP traffic ingress IPv4' + print('Creating rule:',description_text,'...') + conn.network.create_security_group_rule( + security_group_id = onap_security_group.id, + description = description_text, + protocol = None, + direction = 'ingress', + ethertype = 'IPv4', + remote_ip_prefix = '0.0.0.0/0', + port_range_min = None, + port_range_max = None) + except Exception as e: + print(description_text, ' Exception:', type(e), e) + + try: + description_text = 'enable IP traffic ingress IPv6' + print('Creating rule:',description_text,'...') + conn.network.create_security_group_rule( + security_group_id = onap_security_group.id, + description = description_text, + protocol = None, + direction = 'ingress', + ethertype = 'IPv6', + remote_ip_prefix = '::/0', + port_range_min = None, + port_range_max = None) + except Exception as e: + print(description_text, ' Exception:', type(e), e) + + # IPv4 IP egress rule should already exist by default + # try: + # description_text = 'enable IP traffic egress IPv4' + # print('Creating rule:',description_text,'...') + # conn.network.create_security_group_rule( + # security_group_id = onap_security_group.id, + # description = description_text, + # protocol = None, + # direction = 'egress', + # ethertype = 'IPv4', + # remote_ip_prefix = '0.0.0.0/0', + # port_range_min = None, + # port_range_max = None) + # except Exception as e: + # print(description_text, ' Exception:', type(e), e) + + # IPv6 IP egress rule should already exist by default + # try: + # description_text = 'enable IP traffic egress IPv6' + # print('Creating rule:',description_text,'...') + # conn.network.create_security_group_rule( + # security_group_id = onap_security_group.id, + # description = description_text, + # protocol = None, + # direction = 'egress', + # ethertype = 'IPv6', + # remote_ip_prefix = '::/0', + # port_range_min = None, + # port_range_max = None) + # except Exception as e: + # print(description_text, ' Exception:', type(e), e) + + + # public network + public_network = conn.network.find_network(ONAP_PUBLIC_NET_NAME) + if public_network != None: + print('ONAP public network already exists') + else: + print('Creating ONAP public network...') + public_network = conn.network.create_network( + name = ONAP_PUBLIC_NET_NAME, + description = ONAP_PUBLIC_NET_DESC, + #project_id = onap_project.id, + is_admin_state_up = True, + is_shared = True) + # subnet_ids = []: not needed, subnet refers to network_id + print('DEBUG public_network:\n',public_network,'\n\n') + + print('Creating subnetwork for ONAP public network...') + public_subnet = conn.network.create_subnet( + name = ONAP_PUBLIC_SUBNET_NAME, + #project_id = onap_project.id, + network_id = public_network.id, + cidr = ONAP_PUBLIC_SUBNET_CIDR, + ip_version = 4, + is_dhcp_enabled = True, + dns_nameservers = [DNS_SERVER_IP]) # list of DNS IP@ + print('DEBUG public_network:\n',public_network,'\n\n') + print('DEBUG public_subnet:\n',public_subnet,'\n\n') + + + # OAM network + oam_network = conn.network.find_network(ONAP_OAM_NET_NAME) + if oam_network != None: + print('ONAP OAM network already exists') + else: + print('Creating ONAP OAM network...') + oam_network = conn.network.create_network( + name = ONAP_OAM_NET_NAME, + description = ONAP_OAM_NET_DESC, + #project_id = onap_project.id, + is_admin_state_up = True, + is_shared = True) + print('DEBUG oam_network:\n',oam_network,'\n\n') + + print('Creating subnetwork for ONAP OAM network...') + oam_subnet = conn.network.create_subnet( + name = ONAP_OAM_SUBNET_NAME, + #project_id = onap_project.id, + network_id = oam_network.id, + cidr = ONAP_OAM_SUBNET_CIDR, + ip_version = 4, + is_dhcp_enabled = True, + dns_nameservers = [DNS_SERVER_IP]) # list of DNS IP@; maybe not needed for OAM network + print('DEBUG oam_network:\n',oam_network,'\n\n') + print('DEBUG oam_subnet:\n',oam_subnet,'\n\n') + + + # router + onap_router = conn.network.find_router(ONAP_ROUTER_NAME) + if onap_router != None: + print('ONAP router already exists') + else: + print('Creating ONAP router...') + onap_router = conn.network.create_router( + name = ONAP_ROUTER_NAME, + description = ONAP_ROUTER_DESC, + #project_id = onap_project.id, + is_admin_state_up = True) + print('DEBUG onap_router:\n',onap_router,'\n\n') + + # add interfaces to ONAP networks: Public and OAM + # syntax: add_interface_to_router(router, subnet_id=None, port_id=None) + print('Adding interfaces to ONAP router for ONAP public and OAM networks...') + conn.network.add_interface_to_router(onap_router, subnet_id = public_subnet.id) + conn.network.add_interface_to_router(onap_router, subnet_id = oam_subnet.id) + print('DEBUG onap_router:\n',onap_router,'\n\n') + + # not public network, but external network like floating_net + # point to ONAP Public Network as external network (i.e. Gateway); network_id is passed in a body dictionary + # syntax: add_gateway_to_router(router, **body) + print('Adding external network (gateway) to ONAP router...') + + # nope + # network_dict_body = {'network_id': public_network.id} + # nope + # network_dict_body = { + # 'external_fixed_ips': [{'subnet_id' : public_subnet.id}], + # 'network_id': public_network.id + # } + external_network = conn.network.find_network(EXTERNAL_NETWORK_NAME) + print('DEBUG external_network:\n',external_network,'\n\n') + #network_dict_body = {'gateway' : {'network_id' : external_network.id}} + #conn.network.add_gateway_to_router(onap_router, body=network_dict_body) + conn.network.add_gateway_to_router(onap_router, network_id=external_network.id) + + + # also create 5 flavors, from tiny to xlarge (hard-coded, no need for parameters) + print('Creating flavors...') + tiny_flavor = conn.compute.find_flavor("m1.tiny") + if tiny_flavor != None: + print('m1.tiny Flavor already exists') + else: + print('Creating m1.tiny Flavor...') + tiny_flavor = conn.compute.create_flavor( + name = 'm1.tiny', + vcpus = 1, + disk = 1, + ram = 512, + ephemeral = 0, + #swap = 0, + #rxtx_factor = 1.0, + is_public = True) + print('DEBUG tiny_flavor:\n',tiny_flavor,'\n\n') + + small_flavor = conn.compute.find_flavor("m1.small") + if small_flavor != None: + print('m1.small Flavor already exists') + else: + print('Creating m1.small Flavor...') + small_flavor = conn.compute.create_flavor( + name = 'm1.small', + vcpus = 1, + disk = 20, + ram = 2048, + ephemeral = 0, + #swap = 0, + #rxtx_factor = 1.0, + is_public = True) + print('DEBUG small_flavor:\n',small_flavor,'\n\n') + + medium_flavor = conn.compute.find_flavor("m1.medium") + if medium_flavor != None: + print('m1.medium Flavor already exists') + else: + print('Creating m1.medium Flavor...') + medium_flavor = conn.compute.create_flavor( + name = 'm1.medium', + vcpus = 2, + disk = 40, + ram = 4096, + ephemeral = 0, + #swap = 0, + #rxtx_factor = 1.0, + is_public = True) + print('DEBUG medium_flavor:\n',medium_flavor,'\n\n') + + large_flavor = conn.compute.find_flavor("m1.large") + if large_flavor != None: + print('m1.large Flavor already exists') + else: + print('Creating m1.large Flavor...') + large_flavor = conn.compute.create_flavor( + name = 'm1.large', + vcpus = 4, + disk = 80, + ram = 8192, + ephemeral = 0, + #swap = 0, + #rxtx_factor = 1.0, + is_public = True) + print('DEBUG large_flavor:\n',large_flavor,'\n\n') + + xlarge_flavor = conn.compute.find_flavor("m1.xlarge") + if xlarge_flavor != None: + print('m1.xlarge Flavor already exists') + else: + print('Creating m1.xlarge Flavor...') + xlarge_flavor = conn.compute.create_flavor( + name = 'm1.xlarge', + vcpus = 8, + disk = 160, + ram = 16384, + ephemeral = 0, + #swap = 0, + #rxtx_factor = 1.0, + is_public = True) + print('DEBUG xlarge_flavor:\n',xlarge_flavor,'\n\n') + + + + # also create 3 images, Ubuntu 16.04, 14.04, CirrOS + # 64-bit QCOW2 image for cirros-0.4.0-x86_64-disk.img + # description: CirrOS minimal Linux distribution + # http://download.cirros-cloud.net/0.4.0/cirros-0.4.0-x86_64-disk.img + # user/password: cirros/gocubsgo + + # 64-bit QCOW2 image for Ubuntu 16.04 is xenial-server-cloudimg-amd64-disk1.img + # description: Ubuntu Server 16.04 LTS (Xenial Xerus) + # https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-amd64-disk1.img + # user: ubuntu + + # 64-bit QCOW2 image for Ubuntu 14.04 is trusty-server-cloudimg-amd64-disk1.img + # description: Ubuntu Server 14.04 LTS (Trusty Tahr) + # http://cloud-images.ubuntu.com/trusty/current/trusty-server-cloudimg-amd64-disk1.img + # user: ubuntu + + + # IMAGE_NAME = 'cirros-0.4.0-x86_64-disk.img' + # cirros040 = conn.compute.find_image(IMAGE_NAME) + # if cirros040 != None: + # print(IMAGE_NAME,'Image already exists') + # else: + # print('Creating',IMAGE_NAME,'Image ...') + # # no conn.compute.create_image() method yet in OpenStack SDK... unless doc is wrong ? + # cirros040 = conn.compute.create_image( + # name = IMAGE_NAME) + # # no support for URL download ? maybe with Image.metadata, or with ImageDetail class ? + # print('DEBUG cirros040:\n',cirros040,'\n\n') + + + + + except Exception as e: + print("Exception:",type(e), e) + print("[Script terminated]\n") + + + print("OPNFV Auto, end of configuration script\n") + + + +###################################################################### +def main(): + + # configure argument parser: one optional argument + # if no "-d" or "--delete" option, then configure OpenStack for ONAP + # with "-d" or "--delete" option, then delete ONAP configuration in OpenStack + parser = argparse.ArgumentParser() + parser.add_argument("-d", "--delete", + help = "delete ONAP configuration", + action = "store_true") + + # parse arguments and use corresponding script + args = parser.parse_args() + if args.delete: + delete_all_ONAP() + else: + configure_all_ONAP() + + +if __name__ == "__main__": + main() + -- cgit 1.2.3-korg