From 466a4c3252e17370ed4d9d7c854738b26dbf1df1 Mon Sep 17 00:00:00 2001 From: Alexandru Avadanii Date: Thu, 7 Dec 2017 18:03:26 +0100 Subject: u/fuel: Bump & rebase for Pike upgrade - virtual deploys will use only UCA repos, without Armband/MCP; - base image pre-build is now upstream, drop our patches; - drop p/fuel libvirtd group workaround, now upstream in Fuel@OPNFV; - drop p/reclass glusterfs PPA arch extension, obsolete; - refactor armband repos in system.repo.mcp into: * armband (new, contains kernel, libvirt etc.); * armband_openstack (move into system.repo.mcp.openstack); * armband_mk_openstack (move intro system.repo.mcp.openstack); * armband_mcp_extra (move into system.repo.mcp.extra); - drop 'nova: Update console defaults for armv7, aarch64'; - minor rebase of nova libvirt driver patches in our roll-up; JIRA: ARMBAND-335 Change-Id: Ic5b7736cdd1d1ad5ff25728925198e8ea3e6b5b1 Signed-off-by: Alexandru Avadanii --- ...-pre-install-purge-support-for-base-image.patch | 382 --------------------- 1 file changed, 382 deletions(-) delete mode 100644 patches/opnfv-fuel/0015-Add-pre-install-purge-support-for-base-image.patch (limited to 'patches/opnfv-fuel/0015-Add-pre-install-purge-support-for-base-image.patch') diff --git a/patches/opnfv-fuel/0015-Add-pre-install-purge-support-for-base-image.patch b/patches/opnfv-fuel/0015-Add-pre-install-purge-support-for-base-image.patch deleted file mode 100644 index b5096dd6..00000000 --- a/patches/opnfv-fuel/0015-Add-pre-install-purge-support-for-base-image.patch +++ /dev/null @@ -1,382 +0,0 @@ -From: Alexandru Avadanii -Date: Fri, 24 Nov 2017 20:28:01 +0100 -Subject: [PATCH] Add pre-{install,purge} support for base image - -Extend and its invocation from with -support for modifying foundation node VMs base image prior to -using it with: -- additional APT GPG keys; -- additional APT repos; -- packages to pre-install; -- packages to pre-remove; -- (non-configurable) cloud init datasource via NoCloud only, - so VCP VMs won't wait for metadata service; - -While at it, re-use the resulting image as a base for another -round of pre-patching (same operations as above are supported) -to provide a base image for VCP VMs. - -Add AArch64-specific configuration based on new mechanisms: -- pre-install linux-image-generic-hwe-16.04-edge (and headers) - for foundation node and VCP (common) image (also requires new - repo and its key); -- pre-install cloud-init for VCP image (it should already be - installed, but script needs non-empty config for VCP to create - the VCP image and transfer it over to Salt Master); - -NOTE: cloud-init is required on VCP VMs for DHCP on 1st iface. - -JIRA: FUEL-309 - -Change-Id: I7dcaf0ffd9c57009133c6d339496ec831ab14375 -Signed-off-by: Alexandru Avadanii ---- - .gitignore | 1 + - ci/deploy.sh | 23 +++- - mcp/config/scenario/defaults-aarch64.yaml | 18 +++ - .../cluster/all-mcp-ocata-common/aarch64/init.yml | 2 +- - mcp/scripts/lib.sh | 137 ++++++++++++++++++++- - mcp/scripts/salt.sh | 12 ++ - 6 files changed, 185 insertions(+), 8 deletions(-) - -diff --git a/.gitignore b/.gitignore -index 4e90f32..38b4440 100644 ---- a/.gitignore -+++ b/.gitignore -@@ -13,3 +13,4 @@ - **/mcp/scripts/mcp.rsa* - **/mcp/scripts/user-data.sh - **/mcp/scripts/net_mcpcontrol.xml -+**/mcp/scripts/*.img -diff --git a/ci/deploy.sh b/ci/deploy.sh -index 0f42396..b88d2ba 100755 ---- a/ci/deploy.sh -+++ b/ci/deploy.sh -@@ -15,6 +15,7 @@ - do_exit () { - local RC=$? - clean -+ cleanup_mounts - if [ ${RC} -eq 0 ]; then - notify "\n[OK] MCP: Openstack installation finished succesfully!\n\n" 2 - else -@@ -158,6 +159,7 @@ NO_DEPLOY_ENVIRONMENT=${NO_DEPLOY_ENVIRONMENT:-0} - ERASE_ENV=${ERASE_ENV:-0} - - source "${DEPLOY_DIR}/globals.sh" -+source "${DEPLOY_DIR}/lib.sh" - - # - # END of variables to customize -@@ -340,7 +342,6 @@ fi - - # Get required infra deployment data - set +x --source lib.sh - eval "$(parse_yaml "${SCENARIO_DIR}/defaults-$(uname -i).yaml")" - eval "$(parse_yaml "${SCENARIO_DIR}/${DEPLOY_TYPE}/${DEPLOY_SCENARIO}.yaml")" - eval "$(parse_yaml "${LOCAL_PDF_RECLASS}")" -@@ -358,6 +359,23 @@ for node in "${virtual_nodes[@]}"; do - done - virtual_nodes_data=${virtual_nodes_data%|} - -+# Serialize repos, packages to (pre-)install/remove for: -+# - foundation node VM base image (virtual: all VMs, baremetal: cfg01|mas01) -+# - virtualized control plane VM base image (only when VCP is used) -+base_image_flavors=common -+if [[ "${cluster_states[*]}" =~ virtual_control ]]; then -+ base_image_flavors+=" control" -+fi -+for sc in ${base_image_flavors}; do -+ for va in apt_keys apt_repos pkg_install pkg_remove; do -+ key=virtual_${sc}_${va} -+ eval "${key}=\${${key}[@]// /|}" -+ eval "${key}=\${${key}// /,}" -+ virtual_repos_pkgs+="${!key}^" -+ done -+done -+virtual_repos_pkgs=${virtual_repos_pkgs%^} -+ - # Expand reclass and virsh network templates - for tp in "${RECLASS_CLUSTER_DIR}/all-mcp-ocata-common/opnfv/"*.template \ - net_*.template; do -@@ -413,7 +431,8 @@ elif [ ${USE_EXISTING_INFRA} -gt 0 ]; then - check_connection - else - generate_ssh_key -- prepare_vms "${base_image}" "${STORAGE_DIR}" "${virtual_nodes[@]}" -+ prepare_vms "${base_image}" "${STORAGE_DIR}" "${virtual_repos_pkgs}" \ -+ "${virtual_nodes[@]}" - create_networks "${OPNFV_BRIDGES[@]}" - create_vms "${STORAGE_DIR}" "${virtual_nodes_data}" "${OPNFV_BRIDGES[@]}" - update_mcpcontrol_network -diff --git a/mcp/config/scenario/defaults-aarch64.yaml b/mcp/config/scenario/defaults-aarch64.yaml -index 24a4037..d989819 100644 ---- a/mcp/config/scenario/defaults-aarch64.yaml -+++ b/mcp/config/scenario/defaults-aarch64.yaml -@@ -11,3 +11,21 @@ virtual: - default: - vcpus: 6 - ram: 4096 -+ common: -+ apt: -+ keys: -+ - https://linux.enea.com/mcp-repos/ocata/xenial/archive-mcpocata.key -+ repos: -+ # deb [arch=] -+ - armband_openstack 1100 deb [arch=arm64] http://linux.enea.com/mcp-repos/ocata/xenial ocata main -+ - armband_mk_openstack 1100 deb [arch=arm64] http://linux.enea.com/apt-mk/xenial nightly ocata -+ # NOTE(armband): Empty repo, keep commented out as reference -+ # - armband_mcp_extra 1100 deb [arch=arm64] http://linux.enea.com/apt-mk/xenial nightly extra -+ pkg: -+ install: -+ - linux-image-generic-hwe-16.04-edge -+ - linux-headers-generic-hwe-16.04-edge -+ control: -+ pkg: -+ install: -+ - cloud-init -diff --git a/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml b/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml -index b5b78ec..0350afa 100644 ---- a/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml -+++ b/mcp/reclass/classes/cluster/all-mcp-ocata-common/aarch64/init.yml -@@ -8,7 +8,7 @@ - --- - parameters: - _param: -- salt_control_xenial_image: https://cloud-images.ubuntu.com/xenial/current/xenial-server-cloudimg-arm64-uefi1.img -+ salt_control_xenial_image: salt://salt/files/control/images/base_image_opnfv_fuel_vcp.img - - # VMs spawned on Foundation Node / Jump Host net ifaces (max 4) - opnfv_fn_vm_primary_interface: enp1s0 -diff --git a/mcp/scripts/lib.sh b/mcp/scripts/lib.sh -index c6d5d26..654f45e 100644 ---- a/mcp/scripts/lib.sh -+++ b/mcp/scripts/lib.sh -@@ -1,4 +1,5 @@ - #!/bin/bash -e -+# shellcheck disable=SC2155,SC1001 - ############################################################################## - # Copyright (c) 2017 Mirantis Inc., Enea AB and others. - # All rights reserved. This program and the accompanying materials -@@ -11,7 +12,6 @@ - # - - function generate_ssh_key { -- # shellcheck disable=SC2155 - local mcp_ssh_key=$(basename "${SSH_KEY}") - local user=${USER} - if [ -n "${SUDO_USER}" ] && [ "${SUDO_USER}" != 'root' ]; then -@@ -35,6 +35,110 @@ function get_base_image { - wget -P "${image_dir}" -N "${base_image}" - } - -+function mount_image { -+ local image=$1 -+ local image_dir=$2 -+ OPNFV_MNT_DIR="${image_dir}/ubuntu" -+ -+ sudo modprobe nbd loop -+ # Find free nbd, loop devices -+ for dev in '/sys/class/block/nbd'*; do -+ if [ "$(cat "${dev}/size")" = '0' ]; then -+ OPNFV_NBD_DEV=/dev/$(basename "${dev}") -+ break -+ fi -+ done -+ OPNFV_LOOP_DEV=$(losetup -f) -+ export OPNFV_MNT_DIR OPNFV_LOOP_DEV -+ [ -n "${OPNFV_NBD_DEV}" ] && [ -n "${OPNFV_LOOP_DEV}" ] || exit 1 -+ sudo qemu-nbd --connect="${OPNFV_NBD_DEV}" --aio=native --cache=none \ -+ "${image_dir}/${image}" -+ sleep 5 # /dev/nbdNp1 takes some time to come up -+ # grub-update does not like /dev/nbd*, so use a loop device to work around it -+ # Hardcode partition index to 1, unlikely to change for Ubuntu UCA image -+ sudo losetup "${OPNFV_LOOP_DEV}" "${OPNFV_NBD_DEV}p1" -+ mkdir -p "${OPNFV_MNT_DIR}" -+ sudo mount "${OPNFV_LOOP_DEV}" "${OPNFV_MNT_DIR}" -+ sudo mount -t proc proc "${OPNFV_MNT_DIR}/proc" -+ sudo mount -t sysfs sys "${OPNFV_MNT_DIR}/sys" -+ sudo mount -o bind /dev "${OPNFV_MNT_DIR}/dev" -+ sudo mkdir -p "${OPNFV_MNT_DIR}/run/resolvconf" -+ sudo cp /etc/resolv.conf "${OPNFV_MNT_DIR}/run/resolvconf" -+ echo "GRUB_DISABLE_OS_PROBER=true" | \ -+ sudo tee -a "${OPNFV_MNT_DIR}/etc/default/grub" -+} -+ -+function apt_repos_pkgs_image { -+ local apt_key_urls=(${1//,/ }) -+ local all_repos=(${2//,/ }) -+ local pkgs_i=(${3//,/ }) -+ local pkgs_r=(${4//,/ }) -+ [ -n "${OPNFV_MNT_DIR}" ] || exit 1 -+ -+ # APT keys -+ if [ "${#apt_key_urls[@]}" -gt 0 ]; then -+ for apt_key in "${apt_key_urls[@]}"; do -+ sudo chroot "${OPNFV_MNT_DIR}" /bin/bash -c \ -+ "wget -qO - '${apt_key}' | apt-key add -" -+ done -+ fi -+ # Additional repositories -+ for repo_line in "${all_repos[@]}"; do -+ # ||deb|[arch=]||| -+ local repo=(${repo_line//|/ }) -+ [ "${#repo[@]}" -gt 5 ] || continue -+ # NOTE: Names and formatting are compatible with Salt linux.system.repo -+ cat <<-EOF | sudo tee "${OPNFV_MNT_DIR}/etc/apt/preferences.d/${repo[0]}" -+ -+ Package: * -+ Pin: release a=${repo[-2]} -+ Pin-Priority: ${repo[1]} -+ -+ EOF -+ echo "${repo[@]:2}" | sudo tee \ -+ "${OPNFV_MNT_DIR}/etc/apt/sources.list.d/${repo[0]}.list" -+ done -+ # Install packages -+ if [ "${#pkgs_i[@]}" -gt 0 ]; then -+ sudo DEBIAN_FRONTEND="noninteractive" \ -+ chroot "${OPNFV_MNT_DIR}" apt-get update -+ sudo DEBIAN_FRONTEND="noninteractive" FLASH_KERNEL_SKIP="true" \ -+ chroot "${OPNFV_MNT_DIR}" apt-get install -y "${pkgs_i[@]}" -+ fi -+ # Remove packages -+ if [ "${#pkgs_r[@]}" -gt 0 ]; then -+ sudo DEBIAN_FRONTEND="noninteractive" FLASH_KERNEL_SKIP="true" \ -+ chroot "${OPNFV_MNT_DIR}" apt-get purge -y "${pkgs_r[@]}" -+ fi -+ # Disable cloud-init metadata service datasource -+ sudo mkdir -p "${OPNFV_MNT_DIR}/etc/cloud/cloud.cfg.d" -+ echo "datasource_list: [ NoCloud, None ]" | sudo tee \ -+ "${OPNFV_MNT_DIR}/etc/cloud/cloud.cfg.d/95_real_datasources.cfg" -+} -+ -+function cleanup_mounts { -+ # Remove any mounts, loop and/or nbd devs created while patching base image -+ if [ -n "${OPNFV_MNT_DIR}" ] && [ -d "${OPNFV_MNT_DIR}" ]; then -+ if [ -f "${OPNFV_MNT_DIR}/boot/grub/grub.cfg" ]; then -+ # Grub thinks it's running from a live CD -+ sudo sed -i -e 's/^\s*set root=.*$//g' -e 's/^\s*loopback.*$//g' \ -+ "${OPNFV_MNT_DIR}/boot/grub/grub.cfg" -+ fi -+ sudo rm -f "${OPNFV_MNT_DIR}/run/resolvconf/resolv.conf" -+ sync -+ if mountpoint -q "${OPNFV_MNT_DIR}"; then -+ sudo umount -l "${OPNFV_MNT_DIR}" || true -+ fi -+ fi -+ if [ -n "${OPNFV_LOOP_DEV}" ] && \ -+ losetup "${OPNFV_LOOP_DEV}" 1>&2 > /dev/null; then -+ sudo losetup -d "${OPNFV_LOOP_DEV}" -+ fi -+ if [ -n "${OPNFV_NBD_DEV}" ]; then -+ sudo qemu-nbd -d "${OPNFV_NBD_DEV}" || true -+ fi -+} -+ - function cleanup_uefi { - # Clean up Ubuntu boot entry if cfg01, kvm nodes online from previous deploy - # shellcheck disable=SC2086 -@@ -60,22 +164,45 @@ function cleanup_vms { - function prepare_vms { - local base_image=$1; shift - local image_dir=$1; shift -+ local repos_pkgs_str=$1; shift # ^-sep list of repos, pkgs to install/rm - local vnodes=("$@") -+ local image=base_image_opnfv_fuel.img - - cleanup_uefi - cleanup_vms - get_base_image "${base_image}" "${image_dir}" -+ -+ rm -f "${image_dir}/${image%.*}"* -+ if [[ ! "${repos_pkgs_str}" =~ ^\^+$ ]]; then -+ IFS='^' read -r -a repos_pkgs <<< "${repos_pkgs_str}" -+ cp "${image_dir}/${base_image/*\/}" "${image_dir}/${image}" -+ mount_image "${image}" "${image_dir}" -+ apt_repos_pkgs_image "${repos_pkgs[@]:0:4}" -+ cleanup_mounts -+ else -+ ln -sf "${image_dir}/${base_image/*\/}" "${image_dir}/${image}" -+ fi -+ -+ # CWD should be - # shellcheck disable=SC2016 - envsubst '${SALT_MASTER},${CLUSTER_DOMAIN}' < \ - user-data.template > user-data.sh - -+ # Create config ISO and resize OS disk image for each foundation node VM - for node in "${vnodes[@]}"; do -- # create/prepare images - ./create-config-drive.sh -k "$(basename "${SSH_KEY}").pub" -u user-data.sh \ - -h "${node}" "${image_dir}/mcp_${node}.iso" -- cp "${image_dir}/${base_image/*\/}" "${image_dir}/mcp_${node}.qcow2" -+ cp "${image_dir}/${image}" "${image_dir}/mcp_${node}.qcow2" - qemu-img resize "${image_dir}/mcp_${node}.qcow2" 100G - done -+ -+ # VCP VMs base image specific changes -+ if [[ ! "${repos_pkgs_str}" =~ \^{3}$ ]] && [ -n "${repos_pkgs[*]:4}" ]; then -+ mount_image "${image}" "${image_dir}" -+ apt_repos_pkgs_image "${repos_pkgs[@]:4:4}" -+ cleanup_mounts -+ ln -sf "${image_dir}/${image}" "${image_dir}/${image%.*}_vcp.img" -+ fi - } - - function create_networks { -@@ -100,6 +227,8 @@ function create_networks { - - function create_vms { - local image_dir=$1; shift -+ # vnode data should be serialized with the following format: -+ # ',,|,,[...]' - IFS='|' read -r -a vnodes <<< "$1"; shift - local vnode_networks=("$@") - -@@ -139,9 +268,7 @@ function create_vms { - - function update_mcpcontrol_network { - # set static ip address for salt master node, MaaS node -- # shellcheck disable=SC2155 - local cmac=$(virsh domiflist cfg01 2>&1| awk '/mcpcontrol/ {print $5; exit}') -- # shellcheck disable=SC2155 - local amac=$(virsh domiflist mas01 2>&1| awk '/mcpcontrol/ {print $5; exit}') - virsh net-update "mcpcontrol" add ip-dhcp-host \ - "" --live -diff --git a/mcp/scripts/salt.sh b/mcp/scripts/salt.sh -index ab096f3..b719aa8 100755 ---- a/mcp/scripts/salt.sh -+++ b/mcp/scripts/salt.sh -@@ -18,6 +18,8 @@ OPNFV_TMP_DIR="/home/${SALT_MASTER_USER}/opnfv" - OPNFV_GIT_DIR="/root/opnfv" - OPNFV_FUEL_DIR="/root/fuel" - OPNFV_RDIR="reclass/classes/cluster/all-mcp-ocata-common" -+OPNFV_VCP_IMG="mcp/scripts/base_image_opnfv_fuel_vcp.img" -+OPNFV_VCP_DIR="/srv/salt/env/prd/salt/files/control/images" - LOCAL_GIT_DIR="${F_GIT_ROOT%${F_GIT_SUBD}}" - LOCAL_PDF_RECLASS=$1 - NODE_MASK='*' -@@ -34,6 +36,11 @@ if [ -n "${LOCAL_PDF_RECLASS}" ] && [ -f "${LOCAL_PDF_RECLASS}" ]; then - rsync -e "ssh ${SSH_OPTS}" "${LOCAL_PDF_RECLASS}" \ - "${remote_tmp}${F_GIT_SUBD}/mcp/${OPNFV_RDIR}/opnfv/" - fi -+local_vcp_img=$(dirname "${LOCAL_PDF_RECLASS}")/$(basename "${OPNFV_VCP_IMG}") -+if [ -e "${local_vcp_img}" ]; then -+ rsync -L -e "ssh ${SSH_OPTS}" "${local_vcp_img}" \ -+ "${remote_tmp}${F_GIT_SUBD}/${OPNFV_VCP_IMG}" -+fi - - # ssh to cfg01 - # shellcheck disable=SC2086,2087 -@@ -95,4 +102,9 @@ ssh ${SSH_OPTS} "${SSH_SALT}" bash -s -e << SALT_INSTALL_END - salt -C "${NODE_MASK} and not cfg01*" pkg.upgrade refresh=False - - salt -C "${NODE_MASK} or cfg01*" state.sls ntp -+ -+ if [ -f "${OPNFV_FUEL_DIR}/${OPNFV_VCP_IMG}" ]; then -+ mkdir -p "${OPNFV_VCP_DIR}" -+ mv "${OPNFV_FUEL_DIR}/${OPNFV_VCP_IMG}" "${OPNFV_VCP_DIR}/" -+ fi - SALT_INSTALL_END -- cgit 1.2.3-korg