From 6a216628f75cb40fa3acffaa4faf280f09679f5b Mon Sep 17 00:00:00 2001 From: Cristina Pauna Date: Mon, 20 Mar 2017 16:49:11 +0200 Subject: docs: Copy OPNFV docs dir as documentation base Copy the files from fuel as base documentation. A subsequent commit will adapt it with aarch64 specifics. JIRA: ARMBAND-243 Change-Id: I085d3cfab3a65d8ab7954dcdc876f2b922889ee2 Signed-off-by: Cristina Pauna --- .../overview/build/build.instruction.rst | 293 +++++++++++++++++++++ docs/development/overview/build/index.rst | 16 ++ 2 files changed, 309 insertions(+) create mode 100644 docs/development/overview/build/build.instruction.rst create mode 100644 docs/development/overview/build/index.rst (limited to 'docs/development/overview/build') diff --git a/docs/development/overview/build/build.instruction.rst b/docs/development/overview/build/build.instruction.rst new file mode 100644 index 00000000..5fe38cbf --- /dev/null +++ b/docs/development/overview/build/build.instruction.rst @@ -0,0 +1,293 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) Open Platform for NFV Project, Inc. and its contributors + +======== +Abstract +======== + +This document describes how to build the Fuel deployment tool for the +Danube release of OPNFV build system, dependencies and required +system resources. + +============ +Introduction +============ + +This document describes the build system used to build the Fuel +deployment tool for the Danube release of OPNFV, required +dependencies and minimum requirements on the host to be used for the +build system. + +The Fuel build system is designed around Docker containers such that +dependencies outside of the build system can be kept to a minimum. It +also shields the host from any potential dangerous operations +performed by the build system. + +The audience of this document is assumed to have good knowledge in +network and Unix/Linux administration. + +============ +Requirements +============ + +Minimum Hardware Requirements +============================= + +- ~30 GB available disc + +- 4 GB RAM + +Minimum Software Requirements +============================= + +The build host should run Ubuntu 14.04 or 16.04 operating system. + +On the host, the following packages must be installed: + +- An x86_64 host (Bare-metal or VM) with Ubuntu 14.04 LTS installed + + - **Note:** Builds on Wily (Ubuntu 15.x) are currently not supported + - A kernel equal- or later than 3.19 (Vivid), simply available through + +.. code-block:: bash + + $ sudo apt-get install linux-generic-lts-vivid + +- docker - see https://docs.docker.com/installation/ubuntulinux/ for + installation notes for Ubuntu 14.04. Note: use the latest version from + Docker (docker-engine) and not the one in Ubuntu 14.04. + +- git (simply available through $ sudo apt-get install git) + +- make (simply available through $ sudo apt-get install make) + +- curl (simply available through $ sudo apt-get install curl) + +============ +Preparations +============ + +Setting up the Docker build container +===================================== + +After having installed Docker, add yourself to the docker group: + +.. code-block:: bash + + $ sudo usermod -a -G docker [userid] + +Also make sure to define relevant DNS servers part of the global +DNS chain in your configuration file. +Uncomment, and modify the values appropriately. + +For example: + +.. code-block:: bash + + DOCKER_OPTS=" --dns=8.8.8.8 --dns=8.8.8.4" + +Then restart docker: + +.. code-block:: bash + + $ sudo service docker restart + +Setting up OPNFV Gerrit in order to being able to clone the code +---------------------------------------------------------------- + +- Start setting up OPNFV gerrit by creating a SSH key (unless you + don't already have one), create one with ssh-keygen + +- Add your generated public key in OPNFV Gerrit + (this requires a Linux foundation account, create one if you do not + already have one) + +- Select "SSH Public Keys" to the left and then "Add Key" and paste + your public key in. + +Clone the OPNFV code Git repository with your SSH key +----------------------------------------------------- + +Now it is time to clone the code repository: + +.. code-block:: bash + + $ git clone ssh://@gerrit.opnfv.org:29418/fuel + +Now you should have the OPNFV fuel repository with the Fuel +directories stored locally on your build host. + +Check out the Danube release: + +.. code-block:: bash + + $ cd fuel + $ git checkout danube.1.0 + +Clone the OPNFV code Git repository without a SSH key +----------------------------------------------------- + +You can also opt to clone the code repository without a SSH key: + +.. code-block:: bash + + $ git clone https://gerrit.opnfv.org/gerrit/fuel + +Make sure to checkout the release tag as described above. + +Support for building behind a http/https/rsync proxy +==================================================== + +The build system is able to make use of a web proxy setup if the +http_proxy, https_proxy, no_proxy (if needed) and RSYNC_PROXY or +RSYNC_CONNECT_PROG environment variables have been set before invoking make. + +The proxy setup must permit port 80 (http) and 443 (https). +Rsync protocol is currently not used during build process. + +Important note about the host Docker daemon settings +---------------------------------------------------- + +The Docker daemon on the host must be configured to use the http proxy +for it to be able to pull the base Ubuntu 14.04 image from the Docker +registry before invoking make! In Ubuntu this is done by adding a line +like: + +.. code-block:: bash + + export http_proxy="http://10.0.0.1:8888/" + +to /etc/default/docker and restarting the Docker daemon. + +Setting proxy environment variables prior to build +-------------------------------------------------- + +The build system will make use the following environment variables +that needs to be exported to subshells by using export (bash) or +setenv (csh/tcsh). + +.. code-block:: bash + + http_proxy (or HTTP_PROXY) + https_proxy (or HTTP_PROXY) + no_proxy (or NO_PROXY) + RSYNC_PROXY + RSYNC_CONNECT_PROG + +As an example, these are the settings that were put in the user's +.bashrc when verifying the proxy build functionality: + +.. code-block:: bash + + export RSYNC_PROXY=10.0.0.1:8888 + export http_proxy=http://10.0.0.1:8888 + export https_proxy=http://10.0.0.1:8888 + export no_proxy=localhost,127.0.0.1,.consultron.com,.sock + +Using a ssh proxy for the rsync connection +------------------------------------------ + +If the proxy setup is not allowing the rsync protocol, an alternative +solution is to use a SSH tunnel to a machine capable of accessing the +outbound port 873. Set the RSYNC_CONNECT_PROG according to the rsync +manual page (for example to "ssh @ nc %H 873") +to enable this. Also note that netcat needs to be installed on the +remote system! + +Make sure that the ssh command also refers to the user on the remote +system, as the command itself will be run from the Docker build container +as the root user (but with the invoking user's SSH keys). + +Configure your build environment +================================ + +** Configuring the build environment should not be performed if building +standard Danube release ** + +Select the versions of the components you want to build by editing the +fuel/build/config.mk file. + +Non official build: Selecting which plugins to build +==================================================== + +In order to cut the build time for unofficial builds (made by an +individual developer locally), the selection if which Fuel plugins to +build (if any) can be done by environment variable +"BUILD_FUEL_PLUGINS" prior to building. + +Only the plugin targets from fuel/build/f_isoroot/Makefile that are +specified in the environment variable will then be built. In order to +completely disable the building of plugins, the environment variable +is set to " ". When using this functionality, the resulting iso file +will be prepended with the prefix "unofficial-" to clearly indicate +that this is not a full build. + +This method of plugin selection is not meant to be used from within +Gerrit! + +======== +Building +======== + +There are two methods available for building Fuel: + +- A low level method using Make + +- An abstracted method using build.sh + +Low level build method using make +================================= + +The low level method is based on Make: + +From the directory, invoke + +Following targets exist: + +- none/all - this will: + + - Initialize the docker build environment + + - Build Fuel from upstream (as defined by fuel-build/config-spec) + + - Build the OPNFV defined plugins/features from upstream + + - Build the defined additions to fuel (as defined by the structure + of this framework) + + - Apply changes and patches to fuel (as defined by the structure of + this framework) + + - Reconstruct a fuel .iso image + +- clean - this will remove all artifacts from earlier builds. + +- debug - this will simply enter the build container without starting a build, from here you can start a build by enter "make iso" + +If the build is successful, you will find the generated ISO file in +the subdirectory! + +Abstracted build method using build.sh +====================================== + +The abstracted build method uses the script which +allows you to: + +- Create and use a build cache - significantly speeding up the + build time if upstream repositories have not changed. + +- push/pull cache and artifacts to an arbitrary URI (http(s):, file:, ftp:) + +For more info type . + +========= +Artifacts +========= + +The artifacts produced are: + +- - Which represents the bootable Fuel image, XXXX is + replaced with the build identity provided to the build system + +- - Which holds version metadata. diff --git a/docs/development/overview/build/index.rst b/docs/development/overview/build/index.rst new file mode 100644 index 00000000..355e6b72 --- /dev/null +++ b/docs/development/overview/build/index.rst @@ -0,0 +1,16 @@ +.. This work is licensed under a Creative Commons Attribution 4.0 International License. +.. http://creativecommons.org/licenses/by/4.0 +.. (c) Open Platform for NFV Project, Inc. and its contributors + +.. _armband-development-overview-build-label: + +********************************* +Build instruction for Fuel\@OPNFV +********************************* + +.. toctree:: + :numbered: + :maxdepth: 2 + + build.instruction.rst + -- cgit 1.2.3-korg