summaryrefslogtreecommitdiffstats
path: root/docs/release/installation/installation.instruction.rst
diff options
context:
space:
mode:
Diffstat (limited to 'docs/release/installation/installation.instruction.rst')
-rw-r--r--docs/release/installation/installation.instruction.rst209
1 files changed, 63 insertions, 146 deletions
diff --git a/docs/release/installation/installation.instruction.rst b/docs/release/installation/installation.instruction.rst
index ec55d3eb..a879116a 100644
--- a/docs/release/installation/installation.instruction.rst
+++ b/docs/release/installation/installation.instruction.rst
@@ -1,32 +1,28 @@
-.. This document is protected/licensed under the following conditions
-.. (c) Jonas Bjurel (Ericsson AB)
-.. Licensed under a Creative Commons Attribution 4.0 International License.
-.. You should have received a copy of the license along with this work.
-.. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+.. This work is licensed under a Creative Commons Attribution 4.0 International License.
+.. http://creativecommons.org/licenses/by/4.0
+.. (c) Open Platform for NFV Project, Inc. and its contributors
========
Abstract
========
-This document describes how to install the Colorado release of
-OPNFV when using Fuel as a deployment tool, with an AArch64 (only)
-target node pool. It covers its usage, limitations, dependencies
-and required system resources.
+This document describes how to install the Danube release of
+OPNFV when using Fuel as a deployment tool, covering its usage,
+limitations, dependencies and required system resources.
============
Introduction
============
This document provides guidelines on how to install and
-configure the Colorado release of OPNFV when using Fuel as a
-deployment tool, with an AArch64 (only) target node pool,
-including required software and hardware configurations.
+configure the Danube release of OPNFV when using Fuel as a
+deployment tool, including required software and hardware configurations.
Although the available installation options give a high degree of
freedom in how the system is set-up, including architecture, services
and features, etc., said permutations may not provide an OPNFV
compliant reference architecture. This instruction provides a
-step-by-step guide that results in an OPNFV Colorado compliant
+step-by-step guide that results in an OPNFV Danube compliant
deployment.
The audience of this document is assumed to have good knowledge in
@@ -36,55 +32,54 @@ networking and Unix/Linux administration.
Preface
=======
-Before starting the installation of the AArch64 Colorado release
-of OPNFV, using Fuel as a deployment tool, some planning must be
+Before starting the installation of the Danube release of
+OPNFV, using Fuel as a deployment tool, some planning must be
done.
Retrieving the ISO image
========================
First of all, the Fuel deployment ISO image needs to be retrieved, the
-ArmbandFuel .iso image of the AArch64 Colorado release can be found
-at *Reference: 2*
+Fuel .iso image of the Danube release can be found at `OPNFV Downloads <https://www.opnfv.org/software/download>`_.
Building the ISO image
======================
-Alternatively, you may build the Armband Fuel .iso from source by cloning
-the opnfv/armband git repository. To retrieve the repository for the AArch64
-Colorado release use the following command:
+Alternatively, you may build the Fuel .iso from source by cloning the
+opnfv/fuel git repository. To retrieve the repository for the Danube
+release use the following command:
.. code-block:: bash
- $ git clone https://gerrit.opnfv.org/gerrit/armband
+ $ git clone https://gerrit.opnfv.org/gerrit/fuel
-Check-out the Colorado release tag to set the HEAD to the
-baseline required to replicate the Colorado release:
+Check-out the Danube release tag to set the HEAD to the
+baseline required to replicate the Danube release:
.. code-block:: bash
- $ git checkout colorado.3.0.1
+ $ git checkout danube.1.0
-Go to the armband directory and build the .iso:
+Go to the fuel directory and build the .iso:
.. code-block:: bash
- $ cd armband; make all
+ $ cd fuel/build; make all
-For more information on how to build, please see *Reference: 14*
+For more information on how to build, please see :ref:`Build instruction for Fuel\@OPNFV <armband-development-overview-build-label>`
Other preparations
==================
Next, familiarize yourself with Fuel by reading the following documents:
-- Fuel Installation Guide, please see *Reference: 8*
+- `Fuel Installation Guide <http://docs.openstack.org/developer/fuel-docs/userdocs/fuel-install-guide.html>`_
-- Fuel QuickStart, please see *Reference: 9*
+- `Fuel User Guide <http://docs.openstack.org/developer/fuel-docs/userdocs/fuel-user-guide.html>`_
-- Fuel Developer Guide, please see *Reference: 10*
+- `Fuel Developer Guide <http://docs.openstack.org/developer/fuel-docs/devdocs/develop.html>`_
-- Fuel Plugin Developers Guide, please see *Reference: 11*
+- `Fuel Plugin Developers Guide <http://docs.openstack.org/developer/fuel-docs/plugindocs/fuel-plugin-sdk-guide.html>`_
Prior to installation, a number of deployment specific parameters must be collected, those are:
@@ -113,13 +108,13 @@ Hardware requirements
=====================
The following minimum hardware requirements must be met for the
-installation of AArch64 Colorado using Fuel:
+installation of Danube using Fuel:
+--------------------+------------------------------------------------------+
| **HW Aspect** | **Requirement** |
| | |
+====================+======================================================+
-| **AArch64 nodes** | Minimum 5 (3 for non redundant deployment): |
+| **# of nodes** | Minimum 5 (3 for non redundant deployment): |
| | |
| | - 1 Fuel deployment master (may be virtualized) |
| | |
@@ -129,7 +124,7 @@ installation of AArch64 Colorado using Fuel:
| | - 1 Compute (1 co-located Ceph-OSD role) |
| | |
+--------------------+------------------------------------------------------+
-| **CPU** | Minimum 1 socket AArch64 (ARMv8) with Virtualization |
+| **CPU** | Minimum 1 socket x86_AMD64 with Virtualization |
| | support |
+--------------------+------------------------------------------------------+
| **RAM** | Minimum 16GB/server (Depending on VNF work load) |
@@ -138,8 +133,6 @@ installation of AArch64 Colorado using Fuel:
| **Disk** | Minimum 256GB 10kRPM spinning disks |
| | |
+--------------------+------------------------------------------------------+
-| **Firmware** | UEFI compatible (e.g. EDK2) with PXE support |
-+--------------------+------------------------------------------------------+
| **Networks** | 4 Tagged VLANs (PUBLIC, MGMT, STORAGE, PRIVATE) |
| | |
| | 1 Un-Tagged VLAN for PXE Boot - ADMIN Network |
@@ -148,8 +141,6 @@ installation of AArch64 Colorado using Fuel:
| | or spread out over multiple NICs as your hardware |
| | supports. |
+--------------------+------------------------------------------------------+
-| **1 x86_64 node** | - 1 Fuel deployment master, x86 (may be virtualized) |
-+--------------------+------------------------------------------------------+
===============================
Help with Hardware Requirements
@@ -157,6 +148,8 @@ Help with Hardware Requirements
Calculate hardware requirements:
+For information on compatible hardware types available for use, please see `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/software/hardware-compatibility/>`_.
+
When choosing the hardware on which you will deploy your OpenStack
environment, you should think about:
@@ -189,9 +182,9 @@ the Fuel OPNFV reference platform. All the networks involved in the OPNFV
infrastructure as well as the provider networks and the private tenant
VLANs needs to be manually configured.
-Manual configuration of the Colorado hardware platform should
-be carried out according to the OPNFV Pharos specification:
-<https://wiki.opnfv.org/display/pharos/Pharos+Specification>
+Manual configuration of the Danube hardware platform should
+be carried out according to the `OPNFV Pharos Specification
+<https://wiki.opnfv.org/display/pharos/Pharos+Specification>`_.
==========================================
OPNFV Software installation and deployment
@@ -204,7 +197,7 @@ reference platform stack across a server cluster.
Install Fuel master
===================
-#. Mount the Colorado Armband Fuel ISO file/media as a boot device to the jump host server.
+#. Mount the Danube Fuel ISO file/media as a boot device to the jump host server.
#. Reboot the jump host to establish the Fuel server.
@@ -230,16 +223,13 @@ Install Fuel master
#. In the "Network Setup" section - Configure DHCP/Static IP information for your FUEL node - For example, ETH0 is 10.20.0.2/24 for FUEL booting and ETH1 is DHCP in your corporate/lab network (see figure below).
-- **NOTE**: Configuration of ETH1 interface for connectivity into your corporate/lab
- network is optional
+ - Configure eth1 or other network interfaces here as well (if you have them present on your FUEL server).
.. figure:: img/fuelmenu2.png
- .. figure:: img/fuelmenu2a.png
-
#. In the "PXE Setup" section (see figure below) - Change the following fields to appropriate values (example below):
- - DHCP Pool Start 10.20.0.3
+ - DHCP Pool Start 10.20.0.4
- DHCP Pool End 10.20.0.254
@@ -264,14 +254,11 @@ Install Fuel master
.. figure:: img/fuelmenu4.png
-#. **DO NOT CHANGE** anything in "Bootstrap Image" section (see figure below).
+#. OPTION TO ENABLE PROXY SUPPORT - In the "Bootstrap Image" section (see figure below), edit the following fields to define a proxy. (**NOTE:** cannot be used in tandem with local repository support)
- In ArmbandFuel@OPNFV, this data is **NOT** actually used for bootstrap
- image building. Any change here will replace the configuration from
- the OPNFV bootstrap build scripts and will lead to a failed bootstrap
- image build.
+ - Navigate to "HTTP proxy" and enter your http proxy address
- **NOTE:** Cannot be used in tandem with local repository support.
+ - Select <Check> and press [Enter]
.. figure:: img/fuelmenu5.png
@@ -287,7 +274,7 @@ Install Fuel master
#. Start the installation.
- - Press <F8>
+ - Select Quit Setup and press Save and Quit.
- The installation will now start, wait until the login screen is shown.
@@ -299,15 +286,9 @@ the login prompt, you should boot the Node Servers (Your
Compute/Control/Storage blades, nested or real) with a PXE booting
scheme so that the FUEL Master can pick them up for control.
-**NOTE**: AArch64 target nodes are expected to support PXE booting an
-EFI binary, i.e. an EFI-stubbed GRUB2 bootloader.
-
-**NOTE**: UEFI (EDK2) firmware is **highly** recommended, becoming
-the **de facto** standard for ARMv8 nodes.
-
#. Enable PXE booting
- - For every controller and compute server: enable PXE Booting as the first boot device in the UEFI (EDK2) boot order menu, and hard disk as the second boot device in the same menu.
+ - For every controller and compute server: enable PXE Booting as the first boot device in the BIOS boot order menu, and hard disk as the second boot device in the same menu.
#. Reboot all the control and compute blades.
@@ -340,9 +321,6 @@ Install additional Plugins/Features on the FUEL node
.. figure:: img/plugin_install.png
- **NOTE**: AArch64 Colorado 1.0 ships only with ODL, OVS, BGPVPN and Tacker
- plugins, see *Reference 15*.
-
Create an OpenStack Environment
===============================
@@ -352,7 +330,7 @@ Create an OpenStack Environment
.. figure:: img/newenv.png
-#. Select "<Mitaka on Ubuntu 14.04 (aarch64)>" and press <Next>
+#. Select "<Mitaka on Ubuntu 14.04>" and press <Next>
#. Select "compute virtulization method".
@@ -362,7 +340,7 @@ Create an OpenStack Environment
- Select "Neutron with ML2 plugin"
- - Select "Neutron with tunneling segmentation" (Required when using the ODL plugin)
+ - Select "Neutron with tunneling segmentation" (Required when using the ODL or ONOS plugins)
- Press <Next>
@@ -497,7 +475,7 @@ Enable Plugins
- Enable and configure the plugins of your choice
- .. figure:: img/plugins_aarch64.png
+ .. figure:: img/plugins.png
Allocate nodes to environment and assign functional roles
=========================================================
@@ -510,7 +488,7 @@ Allocate nodes to environment and assign functional roles
- Click on the <+Add Nodes> button
- - Check <Controller>, <Telemetry - MongoDB> and optionally an SDN Controller role (OpenDaylight controller) in the "Assign Roles" Section.
+ - Check <Controller>, <Telemetry - MongoDB> and optionally an SDN Controller role (OpenDaylight controller/ONOS) in the "Assign Roles" Section.
- Check one node which you want to act as a Controller from the bottom half of the screen
@@ -546,51 +524,10 @@ Allocate nodes to environment and assign functional roles
.. figure:: img/interfaceconf.png
-OPTIONAL - Set Local Mirror Repos
-=================================
-
-The following steps must be executed if you are in an environment with
-no connection to the Internet. The Fuel server delivers a local repo
-that can be used for installation / deployment of openstack.
-
-#. In the Fuel UI of your Environment, click the Settings Tab and select General from the left pane.
-
- - Replace the URI values for the "Name" values outlined below:
-
- - "ubuntu" URI="deb http://<ip-of-fuel-server>:8080/mirrors/ubuntu/ trusty main"
-
- - "mos" URI="deb http://<ip-of-fuel-server>::8080/mitaka-9.0/ubuntu/x86_64 mos9.0 main restricted"
-
- - "Auxiliary" URI="deb http://<ip-of-fuel-server>:8080/mitaka-9.0/ubuntu/auxiliary auxiliary main restricted"
-
- - Click <Save Settings> at the bottom to Save your changes
Target specific configuration
=============================
-#. [AArch64 specific] Configure MySQL WSREP SST provider
-
- **NOTE**: This option is only available for ArmbandFuel@OPNFV, since it
- currently only affects AArch64 targets (see *Reference 15*).
-
- When using some AArch64 platforms as controller nodes, WSREP SST
- synchronisation using default backend provider (xtrabackup-v2) used to fail,
- so a mechanism that allows selecting a different WSREP SST provider
- has been introduced.
-
- In the FUEL UI of your Environment, click the <Settings> tab, click
- <OpenStack Services> on the left side pane (see figure below), then
- select one of the following options:
-
- - xtrabackup-v2 (default provider, AArch64 stability issues);
-
- - rsync (AArch64 validated, better or comparable speed to xtrabackup,
- takes the donor node offline during state transfer);
-
- - mysqldump (untested);
-
- .. figure:: img/fuelwsrepsst.png
-
#. Set up targets for provisioning with non-default "Offloading Modes"
Some target nodes may require additional configuration after they are
@@ -678,55 +615,35 @@ Installation health-check
- Allow tests to run and investigate results where appropriate
- - Check *Reference 15* for known issues / limitations on AArch64
-
.. figure:: img/health.png
-==========
-References
-==========
-OPNFV
-=====
+=============
+Release Notes
+=============
-1) `OPNFV Home Page <http://www.opnfv.org>`_: http://www.opnfv.org
+Please refer to the :ref:`Release Notes <armband-release-notes-label>` article.
-2) `OPNFV documentation- and software downloads <https://www.opnfv.org/software/download>`_: https://www.opnfv.org/software/download
+==========
+References
+==========
OpenStack
-=========
-
-3) `OpenStack Mitaka Release artifacts <http://www.openstack.org/software/mitaka>`_: http://www.openstack.org/software/mitaka
-4) `OpenStack documentation <http://docs.openstack.org>`_: http://docs.openstack.org
+3) `OpenStack Newton Release Artifacts <http://www.openstack.org/software/newton>`_
+4) `OpenStack Documentation <http://docs.openstack.org>`_
OpenDaylight
-============
-5) `OpenDaylight artifacts <http://www.opendaylight.org/software/downloads>`_: http://www.opendaylight.org/software/downloads
+5) `OpenDaylight Artifacts <http://www.opendaylight.org/software/downloads>`_
Fuel
-====
-
-6) `The Fuel OpenStack project <https://wiki.openstack.org/wiki/Fuel>`_: https://wiki.openstack.org/wiki/Fuel
-
-7) `Fuel documentation overview <http://docs.openstack.org/developer/fuel-docs>`_: http://docs.openstack.org/developer/fuel-docs
-
-8) `Fuel Installation Guide <http://docs.openstack.org/developer/fuel-docs/userdocs/fuel-install-guide.html>`_: http://docs.openstack.org/developer/fuel-docs/userdocs/fuel-install-guide.html
-
-9) `Fuel QuickStart Guide <https://docs.mirantis.com/openstack/fuel/fuel-9.0/quickstart-guide.html>`_: https://docs.mirantis.com/openstack/fuel/fuel-9.0/quickstart-guide.html
-
-10) `Fuel Developer Guide <http://docs.openstack.org/developer/fuel-docs/devdocs/develop.html>`_: http://docs.openstack.org/developer/fuel-docs/devdocs/develop.html
-
-11) `Fuel Plugin Developers Guide <http://docs.openstack.org/developer/fuel-docs/plugindocs/fuel-plugin-sdk-guide.html>`_: http://docs.openstack.org/developer/fuel-docs/plugindocs/fuel-plugin-sdk-guide.html
-
-12) `(N/A on AArch64) Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list>`_: https://www.mirantis.com/products/openstack-drivers-and-plugins/hardware-compatibility-list
-
-Fuel in OPNFV
-=============
-
-13) `OPNFV Installation instruction for the AArch64 Colorado release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/colorado/3.0/docs/installationprocedure/index.html>`_: http://artifacts.opnfv.org/armband/colorado/3.0/docs/installationprocedure/index.html
-14) `OPNFV Build instruction for the AArch64 Colorado release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/colorado/3.0/docs/buildprocedure/index.html>`_: http://artifacts.opnfv.org/armband/colorado/3.0/docs/buildprocedure/index.html
+6) `The Fuel OpenStack Project <https://wiki.openstack.org/wiki/Fuel>`_
+7) `Fuel Documentation Overview <http://docs.openstack.org/developer/fuel-docs>`_
+8) `Fuel Installation Guide <http://docs.openstack.org/developer/fuel-docs/userdocs/fuel-install-guide.html>`_
+9) `Fuel User Guide <http://docs.openstack.org/developer/fuel-docs/userdocs/fuel-user-guide.html>`_
+10) `Fuel Developer Guide <http://docs.openstack.org/developer/fuel-docs/devdocs/develop.html>`_
+11) `Fuel Plugin Developers Guide <http://docs.openstack.org/developer/fuel-docs/plugindocs/fuel-plugin-sdk-guide.html>`_
+12) `Fuel OpenStack Hardware Compatibility List <https://www.mirantis.com/software/hardware-compatibility/>`_
-15) `OPNFV Release Note for the AArch64 Colorado release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/colorado/3.0/docs/releasenotes/index.html>`_: http://artifacts.opnfv.org/armband/colorado/3.0/docs/releasenotes/index.html