aboutsummaryrefslogtreecommitdiffstats
path: root/docs/development
diff options
context:
space:
mode:
authorCristina Pauna <cristina.pauna@enea.com>2017-02-17 17:22:48 +0200
committerCristina Pauna <cristina.pauna@enea.com>2017-02-17 17:23:57 +0200
commit86978392a9ba7e6a12af88b94852f3815efbb66a (patch)
treee397fa8122be4d4d82c6824535786f7c42cbd7ef /docs/development
parentaf2ce89bda74abb1d18bea11c8fe1ee6e2cb40af (diff)
Migrate docs to the new Danube dir structure
Change-Id: I6f15bcf5ea66fbdd1c3e4621e7f339dafcea9a7e Signed-off-by: Cristina Pauna <cristina.pauna@enea.com>
Diffstat (limited to 'docs/development')
-rw-r--r--docs/development/buildprocedure/build.instruction.rst342
-rw-r--r--docs/development/buildprocedure/index.rst16
2 files changed, 358 insertions, 0 deletions
diff --git a/docs/development/buildprocedure/build.instruction.rst b/docs/development/buildprocedure/build.instruction.rst
new file mode 100644
index 00000000..405a0e70
--- /dev/null
+++ b/docs/development/buildprocedure/build.instruction.rst
@@ -0,0 +1,342 @@
+.. This document is protected/licensed under the following conditions
+.. (c) Jonas Bjurel (Ericsson AB)
+.. Licensed under a Creative Commons Attribution 4.0 International License.
+.. You should have received a copy of the license along with this work.
+.. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+
+========
+Abstract
+========
+
+This document describes how to build the Fuel deployment tool for the
+AArch64 Colorado release of OPNFV build system, dependencies and
+required system resources.
+
+============
+Introduction
+============
+
+This document describes the build system used to build the Fuel
+deployment tool for the AArch64 Colorado release of OPNFV, required
+dependencies and minimum requirements on the host to be used for the
+build system.
+
+The Fuel build system is designed around Docker containers such that
+dependencies outside of the build system can be kept to a minimum. It
+also shields the host from any potential dangerous operations
+performed by the build system.
+
+The audience of this document is assumed to have good knowledge in
+network and Unix/Linux administration.
+
+Due to early docker and nodejs support on AArch64, we will still use an
+x86_64 Fuel Master to build and deploy an AArch64 target pool, as well
+as an x86_64 build machine for building the OPNFV ISO.
+
+============
+Requirements
+============
+
+Minimum Hardware Requirements
+=============================
+
+- ~50 GB available disc
+
+- 4 GB RAM
+
+Minimum Software Requirements
+=============================
+
+The build host should run Ubuntu 14.04 or 16.04 (x86_64) operating system.
+
+On the host, the following packages must be installed:
+
+- An x86_64 host (Bare-metal or VM) with Ubuntu 14.04 LTS installed
+
+ - **Note:** Builds on Wily (Ubuntu 15.x) are currently not supported
+ - A kernel equal- or later than 3.19 (Vivid), simply available through
+
+.. code-block:: bash
+
+ $ sudo apt-get install linux-generic-lts-vivid
+
+- docker - see https://docs.docker.com/installation/ubuntulinux/ for
+ installation notes for Ubuntu 14.04. Note: use the latest version from
+ Docker (docker-engine) and not the one in Ubuntu 14.04.
+
+- git
+
+- make
+
+- curl
+
+Apart from docker, all other package requirements listed above are
+simply available through:
+
+.. code-block:: bash
+
+ $ sudo apt-get install git make curl
+
+
+============
+Preparations
+============
+
+Setting up the Docker build container
+=====================================
+
+After having installed Docker, add yourself to the docker group:
+
+.. code-block:: bash
+
+ $ sudo usermod -a -G docker [userid]
+
+Also make sure to define relevant DNS servers part of the global
+DNS chain in your </etc/default/docker> configuration file.
+Uncomment, and modify the values appropriately.
+
+For example:
+
+.. code-block:: bash
+
+ DOCKER_OPTS=" --dns=8.8.8.8 --dns=8.8.8.4"
+
+Then restart docker:
+
+.. code-block:: bash
+
+ $ sudo service docker restart
+
+Setting up OPNFV Gerrit in order to being able to clone the code
+----------------------------------------------------------------
+
+- Start setting up OPNFV gerrit by creating a SSH key (unless you
+ don't already have one), create one with ssh-keygen
+
+- Add your generated public key in OPNFV Gerrit (https://gerrit.opnfv.org/)
+ (this requires a Linux foundation account, create one if you do not
+ already have one)
+
+- Select "SSH Public Keys" to the left and then "Add Key" and paste
+ your public key in.
+
+Clone the armband@OPNFV code Git repository with your SSH key
+-------------------------------------------------------------
+
+Now it is time to clone the code repository:
+
+.. code-block:: bash
+
+ $ git clone ssh://<Linux foundation user>@gerrit.opnfv.org:29418/armband
+
+Now you should have the OPNFV armband repository with its
+directories stored locally on your build host.
+
+Check out the Colorado release:
+
+.. code-block:: bash
+
+ $ cd armband
+ $ git checkout colorado.3.0.1
+
+Clone the armband@OPNFV code Git repository without a SSH key
+-------------------------------------------------------------
+
+You can also opt to clone the code repository without a SSH key:
+
+.. code-block:: bash
+
+ $ git clone https://gerrit.opnfv.org/gerrit/armband
+
+Make sure to checkout the release tag as described above.
+
+Support for building behind a http/https/rsync proxy
+====================================================
+
+The build system is able to make use of a web proxy setup if the
+http_proxy, https_proxy, no_proxy (if needed) and RSYNC_PROXY or
+RSYNC_CONNECT_PROG environment variables have been set before invoking make.
+
+The proxy setup must permit port 80 (http) and 443 (https).
+Rsync protocol is currently not used during build process.
+
+Important note about the host Docker daemon settings
+----------------------------------------------------
+
+The Docker daemon on the host must be configured to use the http proxy
+for it to be able to pull the base Ubuntu 14.04 image from the Docker
+registry before invoking make! In Ubuntu this is done by adding a line
+like:
+
+.. code-block:: bash
+
+ export http_proxy="http://10.0.0.1:8888/"
+
+to </etc/default/docker> and restarting the Docker daemon.
+
+Setting proxy environment variables prior to build
+--------------------------------------------------
+
+The build system will make use the following environment variables
+that needs to be exported to subshells by using export (bash) or
+setenv (csh/tcsh).
+
+.. code-block:: bash
+
+ http_proxy (or HTTP_PROXY)
+ https_proxy (or HTTP_PROXY)
+ no_proxy (or NO_PROXY)
+ RSYNC_PROXY
+ RSYNC_CONNECT_PROG
+
+As an example, these are the settings that were put in the user's
+.bashrc when verifying the proxy build functionality:
+
+.. code-block:: bash
+
+ export RSYNC_PROXY=10.0.0.1:8888
+ export http_proxy=http://10.0.0.1:8888
+ export https_proxy=http://10.0.0.1:8888
+ export no_proxy=localhost,127.0.0.1,.consultron.com,.sock
+
+Using a ssh proxy for the rsync connection
+------------------------------------------
+
+If the proxy setup is not allowing the rsync protocol, an alternative
+solution is to use a SSH tunnel to a machine capable of accessing the
+outbound port 873. Set the RSYNC_CONNECT_PROG according to the rsync
+manual page (for example to "ssh <username>@<hostname> nc %H 873")
+to enable this. Also note that netcat needs to be installed on the
+remote system!
+
+Make sure that the ssh command also refers to the user on the remote
+system, as the command itself will be run from the Docker build container
+as the root user (but with the invoking user's SSH keys).
+
+
+Note! Armband build system uses git submodules to track fuel and
+other upstream repos, so in order to apply the above change, one
+should first initialize the submodules and apply armband patches
+(only needed once):
+
+.. code-block:: bash
+
+ $ make patches-import
+
+
+Configure your build environment
+================================
+
+** Configuring the build environment should not be performed if building
+standard Colorado release **
+
+Select the versions of the components you want to build by editing the
+<armband/upstream/fuel/build/config.mk> and
+<armband/upstream/fuel/build/armband.mk> files.
+
+Note! The same observation as above, before altering Makefile, run:
+
+.. code-block:: bash
+
+ $ make patches-import
+
+
+Non official build: Selecting which plugins to build
+====================================================
+
+In order to cut the build time for unofficial builds (made by an
+individual developer locally), the selection if which Fuel plugins to
+build (if any) can be done by environment variable
+"BUILD_FUEL_PLUGINS" prior to building.
+
+Only the plugin targets from <armband/upstream/fuel/build/armband.mk> that
+are specified in the environment variable will then be built. In order
+to completely disable the building of plugins, the environment variable
+is set to " ". When using this functionality, the resulting iso file
+will be prepended with the prefix "unofficial-" to clearly indicate
+that this is not a full build.
+
+This method of plugin selection is not meant to be used from within
+Gerrit!
+
+Note! So far, only ODL, OVS, BGPVPN and Tacker plugins were ported to AArch64.
+
+========
+Building
+========
+
+There are two methods available for building Fuel:
+
+- A low level method using Make
+
+- An abstracted method using build.sh
+
+Low level build method using make
+=================================
+
+The low level method is based on Make:
+
+From the <armband> directory, invoke <make [target]>
+
+Following targets exist:
+
+- release - this will do the same as:
+
+ - make submodules-clean patches-import build
+
+- none/all/build - this will:
+
+ - Initialize the docker build environment
+
+ - Build Fuel from upstream (as defined by fuel-build/config-spec)
+
+ - Build the OPNFV defined plugins/features from upstream
+
+ - Build the defined additions to fuel (as defined by the structure
+ of this framework)
+
+ - Apply changes and patches to fuel (as defined by the structure of
+ this framework)
+
+ - Reconstruct a fuel .iso image
+
+- clean - this will remove all artifacts from earlier builds.
+
+- debug - this will simply enter the build container without starting a build, from here you can start a build by enter "make iso"
+
+If the build is successful, you will find the generated ISO file in
+the <armband/upstream/fuel/build/release> subdirectory!
+
+Abstracted build method using build.sh
+======================================
+
+The abstracted build method uses the <armband/ci/build.sh> script which
+allows you to:
+
+- Create and use a build cache - significantly speeding up the
+ build time if upstream repositories have not changed.
+
+- push/pull cache and artifacts to an arbitrary URI (http(s):, file:, ftp:)
+
+For more info type <armband/ci/build.sh -h>.
+
+=========
+Artifacts
+=========
+
+The artifacts produced are:
+
+- <OPNFV_XXXX.iso> - Which represents the bootable Fuel for AArch64 image,
+ XXXX is replaced with the build identity provided to the build system
+
+- <OPNFV_XXXX.iso.txt> - Which holds version metadata.
+
+==========
+References
+==========
+
+1) `OPNFV Installation instruction for the AArch64 Colorado release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/colorado/3.0/docs/installationprocedure/index.html>`_: http://artifacts.opnfv.org/armband/colorado/3.0/docs/installationprocedure/index.html
+
+2) `OPNFV Build instruction for the AArch64 Colorado release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/colorado/3.0/docs/buildprocedure/index.html>`_: http://artifacts.opnfv.org/armband/colorado/3.0/docs/buildprocedure/index.html
+
+3) `OPNFV Release Note for the AArch64 Colorado release of OPNFV when using Fuel as a deployment tool <http://artifacts.opnfv.org/armband/colorado/3.0/docs/releasenotes/index.html>`_: http://artifacts.opnfv.org/armband/colorado/3.0/docs/releasenotes/index.html
diff --git a/docs/development/buildprocedure/index.rst b/docs/development/buildprocedure/index.rst
new file mode 100644
index 00000000..49f64c31
--- /dev/null
+++ b/docs/development/buildprocedure/index.rst
@@ -0,0 +1,16 @@
+.. This document is protected/licensed under the following conditions
+.. (c) Jonas Bjurel (Ericsson AB)
+.. Licensed under a Creative Commons Attribution 4.0 International License.
+.. You should have received a copy of the license along with this work.
+.. If not, see <http://creativecommons.org/licenses/by/4.0/>.
+
+********************************************
+Build instruction for Fuel\@OPNFV on AArch64
+********************************************
+
+.. toctree::
+ :numbered:
+ :maxdepth: 2
+
+ build.instruction.rst
+