--- # This configuration file defines Network Environment for a # Baremetal Deployment of OPNFV. It contains default values # for 5 following networks: # # - admin # - tenant* # - external* # - storage* # - api* # *) optional networks # # Optional networks will be consolidated with the admin network # if not explicitly configured. # # See short description of the networks in the comments below. # # "admin" is the short name for Control Plane Network. # This network should be IPv4 even it is an IPv6 deployment # IPv6 does not have PXE boot support. # During OPNFV deployment it is used for node provisioning which will require # PXE booting as well as running a DHCP server on this network. Be sure to # disable any other DHCP/TFTP server on this network. # # "tenant" is the network used for tenant traffic. # # "external" is the network which should have internet or external # connectivity. External OpenStack networks will be configured to egress this # network. There can be multiple external networks, but only one assigned as # "public" which OpenStack public API's will register. # # "storage" is the network for storage I/O. # # "api" is an optional network for splitting out OpenStack service API # communication. This should be used for IPv6 deployments. # Meta data for the network configuration network-config-metadata: title: LF-POD-1 Network config version: 0.1 created: Mon Dec 28 2015 comment: None # DNS Settings dns-domain: opnfvlf.org dns-search: opnfvlf.org dns_nameservers: - 8.8.8.8 - 8.8.4.4 # NTP servers ntp: - 0.se.pool.ntp.org - 1.se.pool.ntp.org # Syslog server syslog: server: 10.128.1.24 transport: 'tcp' # Common network settings networks: # Admin configuration (pxe and jumpstart) admin: enabled: true # Network settings for the Installer VM on admin network installer_vm: # Indicates if this VM will be bridged to an interface, or to a bond nic_type: interface # Interfaces to bridge for installer VM (use multiple values for bond) members: - em1 # VLAN tag to use for this network on Installer VM, native means none vlan: native # IP to assign to Installer VM on this network ip: 192.0.2.1 # Usable ip range for the overcloud node IPs (including VIPs) # Last IP is used for host bridge (i.e. br-admin). # If empty entire range is usable. # Cannot overlap with dhcp_range or introspection_range. overcloud_ip_range: - 192.0.2.51 - 192.0.2.99 # Gateway (only needed when public_network is disabled) gateway: 192.0.2.1 # Subnet in CIDR format 192.168.1.0/24 cidr: 192.0.2.0/24 # DHCP range for the admin network, automatically provisioned if empty dhcp_range: - 192.0.2.2 - 192.0.2.50 # Mapping of network configuration for Overcloud Nodes nic_mapping: # Mapping for compute profile (nodes assigned as Compute nodes) compute: # Physical interface type (interface or bond) phys_type: interface # Physical NIC members (Single value allowed for phys_type: interface) members: - eth0 # Mapping for controller profile (nodes assigned as Controller nodes) controller: phys_type: interface members: - eth0 # Tenant network configuration tenant: enabled: true # Subnet in CIDR format 192.168.1.0/24 cidr: 11.0.0.0/24 # Tenant network MTU mtu: 1500 # Tenant network Overlay segmentation ID range: # VNI, VLAN-ID, etc. overlay_id_range: 2,65535 # Tenant network segmentation type: # vlan, vxlan, gre segmentation_type: vxlan # Mapping of network configuration for Overcloud Nodes nic_mapping: # Mapping for compute profile (nodes assigned as Compute nodes) compute: # Physical interface type (interface/bond) phys_type: interface # VLAN tag to use with this NIC vlan: native # Physical NIC members of this mapping # Single value allowed for phys_type: interface members: # Note logical name like nic1 not valid for fdio deployment yet. - eth1 # Mapping for controller profile (nodes assigned as Controller nodes) controller: # Physical interface type (interface/bond) phys_type: interface vlan: native # Note: logicial names like nic1 are not valid for fdio deployment yet. members: - eth1 # Can contain 1 or more external networks external: - public: enabled: true # Public network MTU mtu: 1500 # Network settings for the Installer VM on external network # (note only valid on 'public' external network) installer_vm: # Indicates if this VM will be bridged to an interface, or to a bond nic_type: interface vlan: native # Interfaces to bridge for installer VM (use multiple values for bond) members: - em1 # IP to assign to Installer VM on this network ip: 192.168.37.1 cidr: 192.168.37.0/24 gateway: 192.168.37.1 # Range to allocate to floating IPs for the public network with Neutron floating_ip_range: - 192.168.37.200 - 192.168.37.220 # Usable ip range for the overcloud node IPs (including VIPs) # Last IP will be used for host bridge (i.e. br-public). # If empty entire range is usable. # Cannot overlap with dhcp_range or introspection_range. overcloud_ip_range: - 192.168.37.10 - 192.168.37.199 # Mapping of network configuration for Overcloud Nodes nic_mapping: # Mapping for compute profile (nodes assigned as Compute nodes) compute: # Physical interface type (interface or bond) phys_type: interface # VLAN tag to use with this NIC vlan: native # Physical NIC members of this mapping # Single value allowed for phys_type: interface members: - eth2 # Mapping for controller profile (nodes assigned as Controller nodes) controller: phys_type: interface vlan: native members: - eth2 # External network to be created in OpenStack by Services tenant external_overlay: name: Public_internet type: flat gateway: 192.168.37.1 # another external network # This is an example and not yet supported - private_cloud: enabled: false mtu: 1500 # Network settings for the Installer VM on external network # note only valid on 'public' external network installer_vm: # Indicates if this VM will be bridged to an interface, or to a bond nic_type: interface vlan: 101 # Interfaces to bridge for installer VM (use multiple values for bond) members: - em1 # IP to assign to Installer VM on this network ip: 192.168.38.1 cidr: 192.168.38.0/24 gateway: 192.168.38.1 # Range to allocate to floating IPs for the public network with Neutron floating_ip_range: - 192.168.38.200 - 192.168.38.220 # Usable IP range for overcloud nodes (including VIPs)i # usually this is a shared subnet. # Cannot overlap with dhcp_range or introspection_range. overcloud_ip_range: - 192.168.38.10 - 192.168.38.199 # Mapping of network configuration for Overcloud Nodes nic_mapping: # Mapping for compute profile (nodes assigned as Compute nodes) compute: # Physical interface type (interface or bond) phys_type: interface # VLAN tag to use with this NIC vlan: 101 # Physical NIC members of this mappingi # Single value allowed for phys_type: interface # Note: logical names like nic1 are not valid for fdio deployment yet. members: - eth3 # Mapping for controller profile (nodes assigned as Controller nodes) controller: phys_type: interface vlan: 101 members: - eth3 # External network to be created in OpenStack by Services tenant external_overlay: name: private_cloud type: vlan segmentation_id: 101 gateway: 192.168.38.1 # Storage network configuration storage: enabled: true # Subnet in CIDR format cidr: 12.0.0.0/24 # Storage network MTU mtu: 1500 # Mapping of network configuration for Overcloud Nodes nic_mapping: # Mapping for compute profile (nodes assigned as Compute nodes) compute: # Physical interface type (interface or bond) phys_type: interface # VLAN tag to use with this NIC vlan: native # Physical NIC members of this mapping # Single value allowed for phys_type: interface members: # Note logical names like nic1 not valid for fdio deployment yet. - eth3 # Mapping for controller profile (nodes assigned as Controller nodes) controller: phys_type: interface vlan: native members: - eth3 api: # API network configuration enabled: false # Subnet in CIDR format cidr: fd00:fd00:fd00:4000::/64 # VLAN tag to use for Overcloud hosts on this network vlan: 13 # Api network MTU mtu: 1500 # Mapping of network configuration for Overcloud Nodes nic_mapping: # Mapping for compute profile (nodes assigned as Compute nodes) compute: # Physical interface type (interface or bond) phys_type: interface # VLAN tag to use with this NIC vlan: native # Physical NIC members of this mapping # Single value allowed for phys_type: interface # Note logical names like nic1 not valid for fdio deployment yet. members: - eth4 # Mapping for controller profile (nodes assigned as Controller nodes) controller: phys_type: interface vlan: native members: - eth4 # Apex specific settings apex: networks: admin: # Range used for introspection phase (examining nodes). # This cannot overlap with dhcp_range or overcloud_ip_range. # for the overcloud default external network introspection_range: - 192.0.2.100 - 192.0.2.120