# This configuration file defines Network Environment for a # Baremetal Deployment of OPNFV. It contains default values # for 5 following networks: # # - admin # - tenant* # - external* # - storage* # - api* # *) optional networks # # Optional networks will be consolidated with the admin network # if not explicitly configured. # # See short description of the networks in the comments below. # # "admin" is the short name for Control Plane Network. # This network should be IPv4 even it is an IPv6 deployment # IPv6 does not have PXE boot support. # During OPNFV deployment it is used for node provisioning which will require # PXE booting as well as running a DHCP server on this network. Be sure to # disable any other DHCP/TFTP server on this network. # # "tenant" is the network used for tenant traffic. # # "external" is the network which should have internet or external # connectivity. External OpenStack networks will be configured to egress this # network. There can be multiple external networks, but only one assigned as # "public" which OpenStack public API's will register. # # "storage" is the network for storage I/O. # # "api" is an optional network for splitting out OpenStack service API # communication. This should be used for IPv6 deployments. #Meta data for the network configuration network-config-metadata: title: LF-POD-1 Network config version: 0.1 created: Mon Dec 28 2015 comment: None # DNS Settings dns-domain: opnfvlf.org dns-search: opnfvlf.org dns_nameservers: - 8.8.8.8 - 8.8.4.4 # NTP servers ntp: - 0.se.pool.ntp.org - 1.se.pool.ntp.org # Syslog server syslog: server: 10.128.1.24 transport: 'tcp' # Common network settings networks: # Network configurations admin: # Admin configuration (pxe and jumpstart), enabled: true installer_vm: # Network settings for the Installer VM on admin network nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond members: - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) vlan: native # VLAN tag to use for this network on Installer VM, native means none ip: 192.0.2.1 # IP to assign to Installer VM on this network overcloud_ip_range: - 192.0.2.11 - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be # used for host bridge (i.e. br-admin). If empty entire range is usable. # Cannot overlap with dhcp_range or introspection_range. gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled) cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24 dhcp_range: - 192.0.2.2 - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth0 controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: interface members: - nic1 # tenant: # Tenant network configuration enabled: true cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24 mtu: 1500 # Tenant network MTU overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range: # VNI, VLAN-ID, etc. segmentation_type: vxlan # Tenant network segmentation type: # vlan, vxlan, gre nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) vlan: native # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: interface vlan: native members: - nic2 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" # external: # Can contain 1 or more external networks - public: # "public" network will be the network the installer VM attaches to enabled: true mtu: 1500 # Public network MTU installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond vlan: native members: - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) ip: 192.168.37.1 # IP to assign to Installer VM on this network cidr: 192.168.37.0/24 gateway: 192.168.37.1 floating_ip_range: - 192.168.37.200 - 192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron overcloud_ip_range: - 192.168.37.10 - 192.168.37.199 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be used for host # bridge (i.e. br-public). If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range. nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) vlan: native # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth2 controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: interface vlan: native members: - nic3 external_overlay: # External network to be created in OpenStack by Services tenant name: Public_internet type: flat gateway: 192.168.37.1 - private_cloud: # another external network enabled: false mtu: 1500 installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network) nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond vlan: 101 members: - em1 # Member Interface to bridge to for installer VM (use multiple values for bond) ip: 192.168.38.1 # IP to assign to Installer VM on this network cidr: 192.168.38.0/24 gateway: 192.168.38.1 floating_ip_range: - 192.168.38.200 - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron overcloud_ip_range: - 192.168.38.10 - 192.168.38.199 # Usable IP range for overcloud nodes (including VIPs), usually this is a shared subnet. # Cannot overlap with dhcp_range or introspection_range. nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) vlan: 101 # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth2 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: interface vlan: 101 members: - nic3 external_overlay: # External network to be created in OpenStack by Services tenant name: private_cloud type: vlan segmentation_id: 101 gateway: 192.168.38.1 # storage: # Storage network configuration enabled: true cidr: 12.0.0.0/24 # Subnet in CIDR format mtu: 1500 # Storage network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) vlan: native # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - eth3 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: interface vlan: native members: - nic4 # api: # API network configuration enabled: false cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format vlan: 13 # VLAN tag to use for Overcloud hosts on this network mtu: 1500 # Api network MTU nic_mapping: # Mapping of network configuration for Overcloud Nodes compute: # Mapping for compute profile (nodes that will be used as Compute nodes) phys_type: interface # Physical interface type (interface or bond) vlan: native # VLAN tag to use with this NIC members: # Physical NIC members of this mapping (Single value allowed for interface phys_type) - nic5 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1" controller: # Mapping for controller profile (nodes that will be used as Controller nodes) phys_type: interface vlan: native members: - nic5 # Apex specific settings apex: networks: admin: introspection_range: - 192.0.2.100 - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or overcloud_ip_range. # If the external network 'public' is disabled, then this range will be re-used to configure the floating ip range # for the overcloud default external network