From 9bac84155013e37b408e4a6b2b9fb56de110e731 Mon Sep 17 00:00:00 2001 From: Dan Radez Date: Mon, 8 Feb 2016 10:38:34 -0500 Subject: Fixing the docs includes so that the docs get generated properly Change-Id: Ib344c3be25b7a99316a20a69527e9cb9d86efd1d JIRA: 91 cherry-picked from 404defbb8bb4591a75e876c515872bc2451ca530 --- docs/configguide/baremetalinstall.rst | 165 +-------------------- docs/configguide/introduction.rst | 42 +----- docs/installation-instructions/baremetal.rst | 167 +++++++++++++++++++++- docs/installation-instructions/introduction.rst | 41 +++++- docs/installation-instructions/virtualinstall.rst | 3 + 5 files changed, 211 insertions(+), 207 deletions(-) (limited to 'docs') diff --git a/docs/configguide/baremetalinstall.rst b/docs/configguide/baremetalinstall.rst index 0881da68..dd046d5d 100644 --- a/docs/configguide/baremetalinstall.rst +++ b/docs/configguide/baremetalinstall.rst @@ -1,164 +1 @@ -Installation High-Level Overview - Bare Metal Deployment -======================================================== - -The setup presumes that you have 6 bare metal servers and have already setup network -connectivity on at least 2 interfaces for all servers via a TOR switch or other -network implementation. - -The physical TOR switches are **not** automatically configured from the OPNFV reference -platform. All the networks involved in the OPNFV infrastructure as well as the provider -networks and the private tenant VLANs needs to be manually configured. - -The Jumphost can be installed using the bootable ISO or by other means including the -(``opnfv-apex``) RPM and virtualization capabilities. The Jumphost should then be -configured with an IP gateway on its admin or public interface and configured with a -working DNS server. The Jumphost should also have routable access to the lights out network. - -``opnfv-deploy`` is then executed in order to deploy the Instack VM. ``opnfv-deploy`` uses -three configuration files in order to know how to install and provision the OPNFV target system. -The information gathered under section `Execution Requirements (Bare Metal Only)`_ is put -into the YAML file (``/etc/opnfv-apex/inventory.yaml``) configuration file. Deployment -options are put into the YAML file (``/etc/opnfv-apex/deploy_settings.yaml``). Networking -definitions gathered under section `Network Requirements`_ are put into the YAML file -(``/etc/opnfv-apex/network_settings.yaml``). ``opnfv-deploy`` will boot the Instack VM -and load the target deployment configuration into the provisioning toolchain. This includes -MAC address, IPMI, Networking Environment and OPNFV deployment options. - -Once configuration is loaded and Instack is configured it will then reboot the nodes via IPMI. -The nodes should already be set to PXE boot first off the admin interface. The nodes will -first PXE off of the Instack PXE server and go through a discovery/introspection process. - -Introspection boots off of custom introspection PXE images. These images are designed to look -at the properties of the hardware that is booting off of them and report the properties of -it back to the Instack node. - -After introspection Instack will execute a Heat Stack Deployment to being node provisioning -and configuration. The nodes will reboot and PXE again off the Instack PXE server to -provision each node using the Glance disk images provided by Instack. These disk images -include all the necessary packages and configuration for an OPNFV deployment to execute. -Once the node's disk images have been written to disk the nodes will boot off the newly written -disks and execute cloud-init which will execute the final node configuration. This -configuration is largly completed by executing a puppet apply on each node. - -Installation High-Level Overview - VM Deployment -================================================ - -The VM nodes deployment operates almost the same way as the bare metal deployment with a -few differences. ``opnfv-deploy`` still deploys an Instack VM. In addition to the Instack VM -a collection of VMs (3 control nodes + 2 compute for an HA deployment or 1 control node and -1 compute node for a Non-HA Deployment) will be defined for the target OPNFV deployment. -The part of the toolchain that executes IPMI power instructions calls into libvirt instead of -the IPMI interfaces on baremetal servers to operate the power managment. These VMs are then -provisioned with the same disk images and configuration that baremetal would be. - -To RDO Manager these nodes look like they have just built and registered the same way as -bare metal nodes, the main difference is the use of a libvirt driver for the power management. - -Installation Guide - Bare Metal Deployment -========================================== - -**WARNING: Baremetal documentation is not complete. WARNING: The main missing instructions are r elated to bridging -the networking for the undercloud to the physical underlay network for the overcloud to be deployed to.** - -This section goes step-by-step on how to correctly install and provision the OPNFV target -system to bare metal nodes. - -Install Bare Metal Jumphost ---------------------------- - -1a. If your Jumphost does not have CentOS 7 already on it, or you would like to do a fresh - install, then download the Apex bootable ISO from OPNFV artifacts . - -1b. If your Jump host already has CentOS 7 with libvirt running on it then install the - opnfv-apex RPM from OPNFV artifacts . - -2a. Boot the ISO off of a USB or other installation media and walk through installing OPNFV CentOS 7. - The ISO comes prepared to be written directly to a USB drive with dd as such: - - ``dd if=opnfv-apex.iso of=/dev/sdX bs=4M`` - - Replace /dev/sdX with the device assigned to your usb drive. Then select the USB device as the - boot media on your Jumphost - -2b. Install the RDO Release RPM and the opnfv-apex RPM: - - ``sudo yum install -y https://www.rdoproject.org/repos/rdo-release.rpm opnfv-apex-{version}.rpm`` - - The RDO Project release repository is needed to install OpenVSwitch, which is a dependency of - opnfv-apex. If you do not have external connectivity to use this repository you need to download - the OpenVSwitch RPM from the RDO Project repositories and install it with the opnfv-apex RPM. - -3. After the operating system and the opnfv-apex RPM are installed, login to your Jumphost as root. - -4. Configure IP addresses on the interfaces that you have selected as your networks. - -5. Configure the IP gateway to the Internet either, preferably on the public interface. - -6. Configure your ``/etc/resolv.conf`` to point to a DNS server (8.8.8.8 is provided by Google). - -Creating a Node Inventory File ------------------------------- - -IPMI configuration information gathered in section `Execution Requirements (Bare Metal Only)`_ -needs to be added to the ``inventory.yaml`` file. - -1. Edit ``/etc/apex-opnfv/inventory.yaml``. - -2. The nodes dictionary contains a definition block for each baremetal host that will be deployed. - 1 or more compute nodes and 3 controller nodes are required. - (The example file contains blocks for each of these already). - It is optional at this point to add more compute nodes into the node list. - -3. Edit the following values for each node: - - - ``mac_address``: MAC of the interface that will PXE boot from Instack - - ``ipmi_ip``: IPMI IP Address - - ``ipmi_user``: IPMI username - - ``ipmi_password``: IPMI password - - ``ipmi_type``: Power Management driver to use for the node - - ``cpus``: (Introspected*) CPU cores available - - ``memory``: (Introspected*) Memory available in Mib - - ``disk``: (Introspected*) Disk space available in Gb - - ``arch``: (Introspected*) System architecture - - ``capabilities``: (Optional**) Intended node role (profile:control or profile:compute) - -* Introspection looks up the overcloud node's resources and overrides these value. You can -leave default values and Apex will get the correct values when it runs introspection on the nodes. - -** If capabilities profile is not specified then Apex will select node's roles in the OPNFV cluster -in a non-deterministic fashion. - -Creating the Settings Files ------------------------------------ - -Edit the 2 settings files in /etc/opnfv-apex/. These files have comments to help you customize them. - -1. deploy_settings.yaml - This file includes basic configuration options deployment. - -2. network_settings.yaml - This file provides Apex with the networking information that satisfies the - prerequisite `Network Requirements`_. These are specific to your environment. - -Running ``opnfv-deploy`` ------------------------- - -You are now ready to deploy OPNFV using Apex! -``opnfv-deploy`` will use the inventory and settings files to deploy OPNFV. - -Follow the steps below to execute: - -1. Execute opnfv-deploy - ``sudo opnfv-deploy [ --flat | -n network_setttings.yaml ] -i instackenv.json -d deploy_settings.yaml`` - If you need more information about the options that can be passed to opnfv-deploy use ``opnfv-deploy --help`` - --flat will collapse all networks onto a single nic, -n network_settings.yaml allows you to customize your - networking topology. - -2. Wait while deployment is executed. - If something goes wrong during this part of the process, - it is most likely a problem with the setup of your network or the information in your configuration files. - You will also notice different outputs in your shell. - -3. The message "Overcloud Deployed" will display when When the deployment is complete. Just above this message there - will be a URL that ends in port http://:5000. This url is also the endpoint for the OPNFV Horizon Dashboard - if connected to on port 80. +.. include:: ../installation-instructions/baremetal.rst diff --git a/docs/configguide/introduction.rst b/docs/configguide/introduction.rst index af8e03b6..fba7922b 100644 --- a/docs/configguide/introduction.rst +++ b/docs/configguide/introduction.rst @@ -1,41 +1 @@ -Introduction -============ - -This document describes the steps to install an OPNFV Bramaputra reference -platform, as defined by the Genesis Project using the Apex installer. - -The audience is assumed to have a good background in networking -and Linux administration. - -Preface -======= - -Apex uses the RDO Manager Open Source project as a server provisioning tool. -RDO Manager is the RDO Project implimentation of OpenStack's Triple-O project. -The Triple-O image based life cycle installation tool provisions an OPNFV -Target System (3 controllers, n number of compute nodes) with OPNFV specific -configuration provided by the Apex deployment tool chain. - -The Apex deployment artifacts contain the necessary tools to deploy and -configure an OPNFV target system using the Apex deployment toolchain. -These artifacts offer the choice of using the Apex bootable ISO -(``opnfv-apex-bramaputra.iso``) to both install CentOS 7 and the -nessesary materials to deploy or the Apex RPM (``opnfv-apex.rpm``) -which expects installation to a CentOS 7 libvirt enabled host. The RPM -contains a collection of configuration file, prebuilt disk images, -and the automatic deployment script (``opnfv-deploy``). - -An OPNFV install requires a "Jumphost" in order to operate. The bootable -ISO will allow you to install a customized CentOS 7 release to the Jumphost, -which includes the required packages needed to run ``opnfv-deploy``. -If you already have a Jumphost with CentOS 7 installed, you may choose to -skip the ISO step and simply install the (``opnfv-apex.rpm``) RPM. The RPM -is the same RPM included in the ISO and includes all the necessary disk -images and configuration files to execute an OPNFV deployment. Either method -will prepare a host to the same ready state for OPNFV deployment. - -``opnfv-deploy`` instantiates an RDO Manager Instack VM server using libvirt -as its provider. This VM is then configured and used to provision the -OPNFV target deployment (3 controllers, n compute nodes). These nodes can -be either virtual or bare metal. This guide contains instructions for -installing either method. +.. include:: ../installation-instructions/introduction.rst diff --git a/docs/installation-instructions/baremetal.rst b/docs/installation-instructions/baremetal.rst index 62cbfa2d..c77f2df7 100644 --- a/docs/installation-instructions/baremetal.rst +++ b/docs/installation-instructions/baremetal.rst @@ -1,2 +1,167 @@ -.. include:: ../configguide/baremetal.rst +Installation High-Level Overview - Bare Metal Deployment +======================================================== +The setup presumes that you have 6 bare metal servers and have already setup network +connectivity on at least 2 interfaces for all servers via a TOR switch or other +network implementation. + +The physical TOR switches are **not** automatically configured from the OPNFV reference +platform. All the networks involved in the OPNFV infrastructure as well as the provider +networks and the private tenant VLANs needs to be manually configured. + +The Jumphost can be installed using the bootable ISO or by other means including the +(``opnfv-apex``) RPM and virtualization capabilities. The Jumphost should then be +configured with an IP gateway on its admin or public interface and configured with a +working DNS server. The Jumphost should also have routable access to the lights out network. + +``opnfv-deploy`` is then executed in order to deploy the Instack VM. ``opnfv-deploy`` uses +three configuration files in order to know how to install and provision the OPNFV target system. +The information gathered under section `Execution Requirements (Bare Metal Only)`_ is put +into the YAML file (``/etc/opnfv-apex/inventory.yaml``) configuration file. Deployment +options are put into the YAML file (``/etc/opnfv-apex/deploy_settings.yaml``). Networking +definitions gathered under section `Network Requirements`_ are put into the YAML file +(``/etc/opnfv-apex/network_settings.yaml``). ``opnfv-deploy`` will boot the Instack VM +and load the target deployment configuration into the provisioning toolchain. This includes +MAC address, IPMI, Networking Environment and OPNFV deployment options. + +Once configuration is loaded and Instack is configured it will then reboot the nodes via IPMI. +The nodes should already be set to PXE boot first off the admin interface. The nodes will +first PXE off of the Instack PXE server and go through a discovery/introspection process. + +Introspection boots off of custom introspection PXE images. These images are designed to look +at the properties of the hardware that is booting off of them and report the properties of +it back to the Instack node. + +After introspection Instack will execute a Heat Stack Deployment to being node provisioning +and configuration. The nodes will reboot and PXE again off the Instack PXE server to +provision each node using the Glance disk images provided by Instack. These disk images +include all the necessary packages and configuration for an OPNFV deployment to execute. +Once the node's disk images have been written to disk the nodes will boot off the newly written +disks and execute cloud-init which will execute the final node configuration. This +configuration is largly completed by executing a puppet apply on each node. + +Installation High-Level Overview - VM Deployment +================================================ + +The VM nodes deployment operates almost the same way as the bare metal deployment with a +few differences. ``opnfv-deploy`` still deploys an Instack VM. In addition to the Instack VM +a collection of VMs (3 control nodes + 2 compute for an HA deployment or 1 control node and +1 compute node for a Non-HA Deployment) will be defined for the target OPNFV deployment. +The part of the toolchain that executes IPMI power instructions calls into libvirt instead of +the IPMI interfaces on baremetal servers to operate the power managment. These VMs are then +provisioned with the same disk images and configuration that baremetal would be. + +To RDO Manager these nodes look like they have just built and registered the same way as +bare metal nodes, the main difference is the use of a libvirt driver for the power management. + +Installation Guide - Bare Metal Deployment +========================================== + +**WARNING: Baremetal documentation is not complete. WARNING: The main missing instructions are r elated to bridging +the networking for the undercloud to the physical underlay network for the overcloud to be deployed to.** + +This section goes step-by-step on how to correctly install and provision the OPNFV target +system to bare metal nodes. + +Install Bare Metal Jumphost +--------------------------- + +1a. If your Jumphost does not have CentOS 7 already on it, or you would like to do a fresh + install, then download the Apex bootable ISO from OPNFV artifacts . + +1b. If your Jump host already has CentOS 7 with libvirt running on it then install the + opnfv-apex RPM from OPNFV artifacts . + +2a. Boot the ISO off of a USB or other installation media and walk through installing OPNFV CentOS 7. + The ISO comes prepared to be written directly to a USB drive with dd as such: + + ``dd if=opnfv-apex.iso of=/dev/sdX bs=4M`` + + Replace /dev/sdX with the device assigned to your usb drive. Then select the USB device as the + boot media on your Jumphost + +2b. Install the RDO Release RPM and the opnfv-apex RPM: + + ``sudo yum install -y https://www.rdoproject.org/repos/rdo-release.rpm opnfv-apex-{version}.rpm`` + + The RDO Project release repository is needed to install OpenVSwitch, which is a dependency of + opnfv-apex. If you do not have external connectivity to use this repository you need to download + the OpenVSwitch RPM from the RDO Project repositories and install it with the opnfv-apex RPM. + +3. After the operating system and the opnfv-apex RPM are installed, login to your Jumphost as root. + +4. Configure IP addresses on the interfaces that you have selected as your networks. + +5. Configure the IP gateway to the Internet either, preferably on the public interface. + +6. Configure your ``/etc/resolv.conf`` to point to a DNS server (8.8.8.8 is provided by Google). + +Creating a Node Inventory File +------------------------------ + +IPMI configuration information gathered in section `Execution Requirements (Bare Metal Only)`_ +needs to be added to the ``inventory.yaml`` file. + +1. Edit ``/etc/apex-opnfv/inventory.yaml``. + +2. The nodes dictionary contains a definition block for each baremetal host that will be deployed. + 1 or more compute nodes and 3 controller nodes are required. + (The example file contains blocks for each of these already). + It is optional at this point to add more compute nodes into the node list. + +3. Edit the following values for each node: + + - ``mac_address``: MAC of the interface that will PXE boot from Instack + - ``ipmi_ip``: IPMI IP Address + - ``ipmi_user``: IPMI username + - ``ipmi_password``: IPMI password + - ``ipmi_type``: Power Management driver to use for the node + - ``cpus``: (Introspected*) CPU cores available + - ``memory``: (Introspected*) Memory available in Mib + - ``disk``: (Introspected*) Disk space available in Gb + - ``arch``: (Introspected*) System architecture + - ``capabilities``: (Optional**) Intended node role (profile:control or profile:compute) + +* Introspection looks up the overcloud node's resources and overrides these value. You can +leave default values and Apex will get the correct values when it runs introspection on the nodes. + +** If capabilities profile is not specified then Apex will select node's roles in the OPNFV cluster +in a non-deterministic fashion. + +Creating the Settings Files +----------------------------------- + +Edit the 2 settings files in /etc/opnfv-apex/. These files have comments to help you customize them. + +1. deploy_settings.yaml + This file includes basic configuration options deployment. + +2. network_settings.yaml + This file provides Apex with the networking information that satisfies the + prerequisite `Network Requirements`_. These are specific to your environment. + +Running ``opnfv-deploy`` +------------------------ + +You are now ready to deploy OPNFV using Apex! +``opnfv-deploy`` will use the inventory and settings files to deploy OPNFV. + +Follow the steps below to execute: + +1. Execute opnfv-deploy + ``sudo opnfv-deploy [ --flat | -n network_setttings.yaml ] -i instackenv.json -d deploy_settings.yaml`` + If you need more information about the options that can be passed to opnfv-deploy use ``opnfv-deploy --help`` + --flat will collapse all networks onto a single nic, -n network_settings.yaml allows you to customize your + networking topology. + +2. Wait while deployment is executed. + If something goes wrong during this part of the process, + it is most likely a problem with the setup of your network or the information in your configuration files. + You will also notice different outputs in your shell. + +3. The message "Overcloud Deployed" will display when When the deployment is complete. Just above this message there + will be a URL that ends in port http://:5000. This url is also the endpoint for the OPNFV Horizon Dashboard + if connected to on port 80. + +.. _`Execution Requirements (Bare Metal Only)`: requirements.html#execution-requirements-bare-metal-only +.. _`Network Requirements`: requirements.html#network-requirements diff --git a/docs/installation-instructions/introduction.rst b/docs/installation-instructions/introduction.rst index 883c148a..af8e03b6 100644 --- a/docs/installation-instructions/introduction.rst +++ b/docs/installation-instructions/introduction.rst @@ -1,2 +1,41 @@ -.. include:: ../configguide/introduction.rst +Introduction +============ +This document describes the steps to install an OPNFV Bramaputra reference +platform, as defined by the Genesis Project using the Apex installer. + +The audience is assumed to have a good background in networking +and Linux administration. + +Preface +======= + +Apex uses the RDO Manager Open Source project as a server provisioning tool. +RDO Manager is the RDO Project implimentation of OpenStack's Triple-O project. +The Triple-O image based life cycle installation tool provisions an OPNFV +Target System (3 controllers, n number of compute nodes) with OPNFV specific +configuration provided by the Apex deployment tool chain. + +The Apex deployment artifacts contain the necessary tools to deploy and +configure an OPNFV target system using the Apex deployment toolchain. +These artifacts offer the choice of using the Apex bootable ISO +(``opnfv-apex-bramaputra.iso``) to both install CentOS 7 and the +nessesary materials to deploy or the Apex RPM (``opnfv-apex.rpm``) +which expects installation to a CentOS 7 libvirt enabled host. The RPM +contains a collection of configuration file, prebuilt disk images, +and the automatic deployment script (``opnfv-deploy``). + +An OPNFV install requires a "Jumphost" in order to operate. The bootable +ISO will allow you to install a customized CentOS 7 release to the Jumphost, +which includes the required packages needed to run ``opnfv-deploy``. +If you already have a Jumphost with CentOS 7 installed, you may choose to +skip the ISO step and simply install the (``opnfv-apex.rpm``) RPM. The RPM +is the same RPM included in the ISO and includes all the necessary disk +images and configuration files to execute an OPNFV deployment. Either method +will prepare a host to the same ready state for OPNFV deployment. + +``opnfv-deploy`` instantiates an RDO Manager Instack VM server using libvirt +as its provider. This VM is then configured and used to provision the +OPNFV target deployment (3 controllers, n compute nodes). These nodes can +be either virtual or bare metal. This guide contains instructions for +installing either method. diff --git a/docs/installation-instructions/virtualinstall.rst b/docs/installation-instructions/virtualinstall.rst index 5ca20d4f..b31a6af0 100644 --- a/docs/installation-instructions/virtualinstall.rst +++ b/docs/installation-instructions/virtualinstall.rst @@ -81,3 +81,6 @@ and read to be SSHed to. | ``ping 192.168.37.1`` Now continue with the `Verifying the Setup`_ section. + +.. _`Install Bare Metal Jumphost`: baremetal.html +.. _`Verifying the Setup`: verification.html -- cgit 1.2.3-korg