From 4bdb2d6a128664082bddad51091e0d9fb63068fd Mon Sep 17 00:00:00 2001 From: Sofia Wallin Date: Fri, 17 Feb 2017 14:00:36 +0100 Subject: Doc updates for MS6 Updated the docs structure according to directives and MS6 Change-Id: I36e92cbc58328528ebb91ff4f54ee701f5477443 Signed-off-by: Sofia Wallin --- docs/installationprocedure/abstract.rst | 16 -- docs/installationprocedure/architecture.rst | 143 ------------- docs/installationprocedure/baremetal.rst | 273 ------------------------- docs/installationprocedure/index.rst | 28 --- docs/installationprocedure/introduction.rst | 42 ---- docs/installationprocedure/references.rst | 40 ---- docs/installationprocedure/requirements.rst | 78 ------- docs/installationprocedure/troubleshooting.rst | 144 ------------- docs/installationprocedure/verification.rst | 89 -------- docs/installationprocedure/virtualinstall.rst | 69 ------- 10 files changed, 922 deletions(-) delete mode 100644 docs/installationprocedure/abstract.rst delete mode 100644 docs/installationprocedure/architecture.rst delete mode 100644 docs/installationprocedure/baremetal.rst delete mode 100644 docs/installationprocedure/index.rst delete mode 100644 docs/installationprocedure/introduction.rst delete mode 100644 docs/installationprocedure/references.rst delete mode 100644 docs/installationprocedure/requirements.rst delete mode 100644 docs/installationprocedure/troubleshooting.rst delete mode 100644 docs/installationprocedure/verification.rst delete mode 100644 docs/installationprocedure/virtualinstall.rst (limited to 'docs/installationprocedure') diff --git a/docs/installationprocedure/abstract.rst b/docs/installationprocedure/abstract.rst deleted file mode 100644 index 70814cea..00000000 --- a/docs/installationprocedure/abstract.rst +++ /dev/null @@ -1,16 +0,0 @@ -Abstract -======== - -This document describes how to install the Colorado release of OPNFV when -using Apex as a deployment tool covering it's limitations, dependencies -and required system resources. - -License -======= -Colorado release of OPNFV when using Apex as a deployment tool Docs -(c) by Tim Rozet (Red Hat) and Dan Radez (Red Hat) - -Colorado release of OPNFV when using Apex as a deployment tool Docs -are licensed under a Creative Commons Attribution 4.0 International License. -You should have received a copy of the license along with this. -If not, see . diff --git a/docs/installationprocedure/architecture.rst b/docs/installationprocedure/architecture.rst deleted file mode 100644 index 38806391..00000000 --- a/docs/installationprocedure/architecture.rst +++ /dev/null @@ -1,143 +0,0 @@ -Triple-O Deployment Architecture -================================ - -Apex is based on the OpenStack Triple-O project as distributed by -the RDO Project. It is important to understand the basics -of a Triple-O deployment to help make decisions that will assist in -successfully deploying OPNFV. - -Triple-O stands for OpenStack On OpenStack. This means that OpenStack -will be used to install OpenStack. The target OPNFV deployment is an -OpenStack cloud with NFV features built-in that will be deployed by a -smaller all-in-one deployment of OpenStack. In this deployment -methodology there are two OpenStack installations. They are referred -to as the undercloud and the overcloud. The undercloud is used to -deploy the overcloud. - -The undercloud is the all-in-one installation of OpenStack that includes -baremetal provisioning capability. The undercloud will be deployed as a -virtual machine on a jumphost. This VM is pre-built and distributed as part -of the Apex RPM. - -The overcloud is OPNFV. Configuration will be passed into undercloud and -the undercloud will use OpenStack's orchestration component, named Heat, to -execute a deployment that will provision the target OPNFV nodes. - -Apex High Availability Architecture -=================================== - -Undercloud ----------- - -The undercloud is not Highly Available. End users do not depend on the -underloud. It is only for management purposes. - -Overcloud ---------- - -Apex will deploy three control nodes in an HA deployment. Each of these nodes -will run the following services: - -- Stateless OpenStack services -- MariaDB / Galera -- RabbitMQ -- OpenDaylight -- HA Proxy -- Pacemaker & VIPs -- Ceph Monitors and OSDs - -Stateless OpenStack services - All running statesless OpenStack services are load balanced by HA Proxy. - Pacemaker monitors the services and ensures that they are running. - -Stateful OpenStack services - All running stateful OpenStack services are load balanced by HA Proxy. - They are monitored by pacemaker in an active/passive failover configuration. - -MariaDB / Galera - The MariaDB database is replicated across the control nodes using Galera. - Pacemaker is responsible for a proper start up of the Galera cluster. HA - Proxy provides and active/passive failover methodology to connections to the - database. - -RabbitMQ - The message bus is managed by Pacemaker to ensure proper start up and - establishment of clustering across cluster members. - -OpenDaylight - OpenDaylight is currently installed on all three control nodes but only - started on the first control node. OpenDaylight's HA capabilities are not yet - mature enough to be enabled. - -HA Proxy - HA Proxy is monitored by Pacemaker to ensure it is running across all nodes - and available to balance connections. - -Pacemaker & VIPs - Pacemaker has relationships and restraints setup to ensure proper service - start up order and Virtual IPs associated with specific services are running - on the proper host. - -Ceph Monitors & OSDs - The Ceph monitors run on each of the control nodes. Each control node also - has a Ceph OSD running on it. By default the OSDs use an autogenerated - virtual disk as their target device. A non-autogenerated device can be - specified in the deploy file. - -VM Migration is configured and VMs can be evacuated as needed or as invoked -by tools such as heat as part of a monitored stack deployment in the overcloud. - - -OPNFV Scenario Architecture -=========================== - -OPNFV distinguishes different types of SDN controllers, deployment options, and -features into "scenarios". These scenarios are universal across all OPNFV -installers, although some may or may not be supported by each installer. - -The standard naming convention for a scenario is: ---- - -The only supported VIM type is "OS" (OpenStack), while SDN types can be any -supported SDN controller. "feature" includes things like ovs_dpdk, sfc, etc. -"ha" or "noha" determines if the deployment will be highly available. If "ha" -is used at least 3 control nodes are required. - -OPNFV Scenarios in Apex -======================= - -Apex provides pre-built scenario files in /etc/opnfv-apex which a user can -select from to deploy the desired scenario. Simply pass the desired file to -the installer as a (-d) deploy setting. Read further in the Apex documentation -to learn more about invoking the deploy command. Below is quick reference -matrix for OPNFV scenarios supported in Apex. Please refer to the respective -OPNFV Docs documentation for each scenario in order to see a full scenario -description. Also, please refer to release-notes for information about known -issues per scenario. The following scenarios correspond to a supported -.yaml deploy settings file: - -+-------------------------+------------+-----------------+ -| **Scenario** | **Owner** | **Supported** | -+-------------------------+------------+-----------------+ -| os-nosdn-nofeature-ha | Apex | Yes | -+-------------------------+------------+-----------------+ -| os-nosdn-nofeature-noha | Apex | Yes | -+-------------------------+------------+-----------------+ -| os-nosdn-ovs-noha | OVS for NFV| Yes | -+-------------------------+------------+-----------------+ -| os-nosdn-fdio-noha | FDS | Yes | -+-------------------------+------------+-----------------+ -| os-odl_l2-nofeature-ha | Apex | Yes | -+-------------------------+------------+-----------------+ -| os-odl_l3-nofeature-ha | Apex | Yes | -+-------------------------+------------+-----------------+ -| os-odl_l2-sfc-noha | SFC | Yes | -+-------------------------+------------+-----------------+ -| os-odl-bgpvpn-ha | SDNVPN | No | -+-------------------------+------------+-----------------+ -| os-odl_l2-fdio-noha | FDS | Yes | -+-------------------------+------------+-----------------+ -| os-onos-nofeature-ha | ONOSFW | Yes | -+-------------------------+------------+-----------------+ -| os-onos-sfc-ha | ONOSFW | Yes | -+-------------------------+------------+-----------------+ diff --git a/docs/installationprocedure/baremetal.rst b/docs/installationprocedure/baremetal.rst deleted file mode 100644 index 83cda326..00000000 --- a/docs/installationprocedure/baremetal.rst +++ /dev/null @@ -1,273 +0,0 @@ -Installation High-Level Overview - Bare Metal Deployment -======================================================== - -The setup presumes that you have 6 or more bare metal servers already setup -with network connectivity on at least 1 or more network interfaces for all -servers via a TOR switch or other network implementation. - -The physical TOR switches are **not** automatically configured from the OPNFV -reference platform. All the networks involved in the OPNFV infrastructure as -well as the provider networks and the private tenant VLANs needs to be manually -configured. - -The Jumphost can be installed using the bootable ISO or by using the -(``opnfv-apex*.rpm``) RPMs and their dependencies. The Jumphost should then be -configured with an IP gateway on its admin or public interface and configured -with a working DNS server. The Jumphost should also have routable access -to the lights out network for the overcloud nodes. - -``opnfv-deploy`` is then executed in order to deploy the undercloud VM and to -provision the overcloud nodes. ``opnfv-deploy`` uses three configuration files -in order to know how to install and provision the OPNFV target system. -The information gathered under section -`Execution Requirements (Bare Metal Only)`_ is put into the YAML file -``/etc/opnfv-apex/inventory.yaml`` configuration file. Deployment options are -put into the YAML file ``/etc/opnfv-apex/deploy_settings.yaml``. Alternatively -there are pre-baked deploy_settings files available in ``/etc/opnfv-apex/``. -These files are named with the naming convention -os-sdn_controller-enabled_feature-[no]ha.yaml. These files can be used in place -of the ``/etc/opnfv-apex/deploy_settings.yaml`` file if one suites your -deployment needs. Networking definitions gathered under section -`Network Requirements`_ are put into the YAML file -``/etc/opnfv-apex/network_settings.yaml``. ``opnfv-deploy`` will boot the -undercloud VM and load the target deployment configuration into the -provisioning toolchain. This information includes MAC address, IPMI, -Networking Environment and OPNFV deployment options. - -Once configuration is loaded and the undercloud is configured it will then -reboot the overcloud nodes via IPMI. The nodes should already be set to PXE -boot first off the admin interface. The nodes will first PXE off of the -undercloud PXE server and go through a discovery/introspection process. - -Introspection boots off of custom introspection PXE images. These images are -designed to look at the properties of the hardware that is being booted -and report the properties of it back to the undercloud node. - -After introspection the undercloud will execute a Heat Stack Deployment to -continue node provisioning and configuration. The nodes will reboot and PXE -from the undercloud PXE server again to provision each node using Glance disk -images provided by the undercloud. These disk images include all the necessary -packages and configuration for an OPNFV deployment to execute. Once the disk -images have been written to node's disks the nodes will boot locally and -execute cloud-init which will execute the final node configuration. This -configuration is largly completed by executing a puppet apply on each node. - -Installation High-Level Overview - VM Deployment -================================================ - -The VM nodes deployment operates almost the same way as the bare metal -deployment with a few differences mainly related to power management. -``opnfv-deploy`` still deploys an undercloud VM. In addition to the undercloud -VM a collection of VMs (3 control nodes + 2 compute for an HA deployment or 1 -control node and 1 or more compute nodes for a Non-HA Deployment) will be -defined for the target OPNFV deployment. The part of the toolchain that -executes IPMI power instructions calls into libvirt instead of the IPMI -interfaces on baremetal servers to operate the power managment. These VMs are -then provisioned with the same disk images and configuration that baremetal -would be. - -To Triple-O these nodes look like they have just built and registered the same -way as bare metal nodes, the main difference is the use of a libvirt driver for -the power management. - -Installation Guide - Bare Metal Deployment -========================================== - -This section goes step-by-step on how to correctly install and provision the -OPNFV target system to bare metal nodes. - -Install Bare Metal Jumphost ---------------------------- - -1a. If your Jumphost does not have CentOS 7 already on it, or you would like to - do a fresh install, then download the Apex bootable ISO from the OPNFV - artifacts site . There have been - isolated reports of problems with the ISO having trouble completing - installation successfully. In the unexpected event the ISO does not work - please workaround this by downloading the CentOS 7 DVD and performing a - "Virtualization Host" install. If you perform a "Minimal Install" or - install type other than "Virtualization Host" simply run - ``sudo yum groupinstall "Virtualization Host"`` - ``chkconfig libvirtd on && reboot`` - to install virtualzation support and enable libvirt on boot. If you use the - CentOS 7 DVD proceed to step 1b once the CentOS 7 with "Virtualzation Host" - support is completed. - -1b. If your Jump host already has CentOS 7 with libvirt running on it then - install the install the RDO Newton Release RPM and epel-release: - - ``sudo yum install https://repos.fedorapeople.org/repos/openstack/openstack-newton/rdo-release-newton-4.noarch.rpm`` - ``sudo yum install epel-release`` - - The RDO Project release repository is needed to install OpenVSwitch, which - is a dependency of opnfv-apex. If you do not have external connectivity to - use this repository you need to download the OpenVSwitch RPM from the RDO - Project repositories and install it with the opnfv-apex RPM. - -2a. Boot the ISO off of a USB or other installation media and walk through - installing OPNFV CentOS 7. The ISO comes prepared to be written directly - to a USB drive with dd as such: - - ``dd if=opnfv-apex.iso of=/dev/sdX bs=4M`` - - Replace /dev/sdX with the device assigned to your usb drive. Then select - the USB device as the boot media on your Jumphost - -2b. If your Jump host already has CentOS 7 with libvirt running on it then - install the opnfv-apex RPMs using the OPNFV artifacts yum repo. This yum - repo is created at release. It will not exist before release day. - - ``sudo yum install http://artifacts.opnfv.org/apex/danube/opnfv-apex-release-danube.noarch.rpm`` - - Once you have installed the repo definitions for Apex, RDO and EPEL then - yum install Apex: - - ``sudo yum install opnfv-apex`` - - If ONOS will be used, install the ONOS rpm instead of the opnfv-apex rpm. - - ``sudo yum install opnfv-apex-onos`` - -2c. If you choose not to use the Apex yum repo or you choose to use - pre-released RPMs you can download and install the required RPMs from the - artifacts site . The following RPMs - are available for installation: - - - opnfv-apex - OpenDaylight L2 / L3 and ODL SFC support * - - opnfv-apex-onos - ONOS support * - - opnfv-apex-undercloud - (reqed) Undercloud Image - - opnfv-apex-common - (reqed) Supporting config files and scripts - - python34-markupsafe - (reqed) Dependency of opnfv-apex-common ** - - python3-jinja2 - (reqed) Dependency of opnfv-apex-common ** - - python3-ipmi - (reqed) Dependency of opnfv-apex-common ** - - \* One or more of these RPMs is required - Only one of opnfv-apex or opnfv-apex-onos is required. It is safe to leave - the unneeded SDN controller's RPMs uninstalled if you do not intend to use - them. - - ** These RPMs are not yet distributed by CentOS or EPEL. - Apex has built these for distribution with Apex while CentOS and EPEL do - not distribute them. Once they are carried in an upstream channel Apex will - no longer carry them and they will not need special handling for - installation. - - - The EPEL and RDO yum repos are still required: - ``sudo yum install epel-release`` - ``sudo yum install https://repos.fedorapeople.org/repos/openstack/openstack-newton/rdo-release-newton-4.noarch.rpm`` - - Once the apex RPMs are downloaded install them by passing the file names - directly to yum: - ``sudo yum install python34-markupsafe-.rpm - python3-jinja2-.rpm python3-ipmi-.rpm`` - ``sudo yum install opnfv-apex-.rpm - opnfv-apex-undercloud-.rpm opnfv-apex-common-.rpm`` - -3. After the operating system and the opnfv-apex RPMs are installed, login to - your Jumphost as root. - -4. Configure IP addresses on the interfaces that you have selected as your - networks. - -5. Configure the IP gateway to the Internet either, preferably on the public - interface. - -6. Configure your ``/etc/resolv.conf`` to point to a DNS server - (8.8.8.8 is provided by Google). - -Creating a Node Inventory File ------------------------------- - -IPMI configuration information gathered in section -`Execution Requirements (Bare Metal Only)`_ needs to be added to the -``inventory.yaml`` file. - -1. Copy ``/usr/share/doc/opnfv/inventory.yaml.example`` as your inventory file - template to ``/etc/opnfv-apex/inventory.yaml``. - -2. The nodes dictionary contains a definition block for each baremetal host - that will be deployed. 1 or more compute nodes and 3 controller nodes are - required. (The example file contains blocks for each of these already). - It is optional at this point to add more compute nodes into the node list. - -3. Edit the following values for each node: - - - ``mac_address``: MAC of the interface that will PXE boot from undercloud - - ``ipmi_ip``: IPMI IP Address - - ``ipmi_user``: IPMI username - - ``ipmi_password``: IPMI password - - ``pm_type``: Power Management driver to use for the node - values: pxe_ipmitool (tested) or pxe_wol (untested) or pxe_amt (untested) - - ``cpus``: (Introspected*) CPU cores available - - ``memory``: (Introspected*) Memory available in Mib - - ``disk``: (Introspected*) Disk space available in Gb - - ``disk_device``: (Opt***) Root disk device to use for installation - - ``arch``: (Introspected*) System architecture - - ``capabilities``: (Opt**) Node's role in deployment - values: profile:control or profile:compute - - \* Introspection looks up the overcloud node's resources and overrides these - value. You can leave default values and Apex will get the correct values when - it runs introspection on the nodes. - - ** If capabilities profile is not specified then Apex will select node's roles - in the OPNFV cluster in a non-deterministic fashion. - - \*** disk_device declares which hard disk to use as the root device for - installation. The format is a comma delimited list of devices, such as - "sda,sdb,sdc". The disk chosen will be the first device in the list which - is found by introspection to exist on the system. Currently, only a single - definition is allowed for all nodes. Therefore if multiple disk_device - definitions occur within the inventory, only the last definition on a node - will be used for all nodes. - -Creating the Settings Files ---------------------------- - -Edit the 2 settings files in /etc/opnfv-apex/. These files have comments to -help you customize them. - -1. deploy_settings.yaml - This file includes basic configuration options deployment, and also documents - all available options. - Alternatively, there are pre-built deploy_settings files available in - (``/etc/opnfv-apex/``). These files are named with the naming convention - os-sdn_controller-enabled_feature-[no]ha.yaml. These files can be used in - place of the (``/etc/opnfv-apex/deploy_settings.yaml``) file if one suites - your deployment needs. If a pre-built deploy_settings file is choosen there - is no need to customize (``/etc/opnfv-apex/deploy_settings.yaml``). The - pre-built file can be used in place of the - (``/etc/opnfv-apex/deploy_settings.yaml``) file. - -2. network_settings.yaml - This file provides Apex with the networking information that satisfies the - prerequisite `Network Requirements`_. These are specific to your - environment. - -Running ``opnfv-deploy`` ------------------------- - -You are now ready to deploy OPNFV using Apex! -``opnfv-deploy`` will use the inventory and settings files to deploy OPNFV. - -Follow the steps below to execute: - -1. Execute opnfv-deploy - ``sudo opnfv-deploy -n network_settings.yaml - -i inventory.yaml -d deploy_settings.yaml`` - If you need more information about the options that can be passed to - opnfv-deploy use ``opnfv-deploy --help``. -n - network_settings.yaml allows you to customize your networking topology. - -2. Wait while deployment is executed. - If something goes wrong during this part of the process, start by reviewing - your network or the information in your configuration files. It's not - uncommon for something small to be overlooked or mis-typed. - You will also notice outputs in your shell as the deployment progresses. - -3. When the deployment is complete the undercloud IP and ovecloud dashboard - url will be printed. OPNFV has now been deployed using Apex. - -.. _`Execution Requirements (Bare Metal Only)`: index.html#execution-requirements-bare-metal-only -.. _`Network Requirements`: index.html#network-requirements diff --git a/docs/installationprocedure/index.rst b/docs/installationprocedure/index.rst deleted file mode 100644 index 83e9292e..00000000 --- a/docs/installationprocedure/index.rst +++ /dev/null @@ -1,28 +0,0 @@ -************************************** -OPNFV Installation instructions (Apex) -************************************** - -Contents: - -.. toctree:: - :numbered: - :maxdepth: 4 - - abstract.rst - introduction.rst - architecture.rst - requirements.rst - baremetal.rst - virtualinstall.rst - verification.rst - troubleshooting.rst - references.rst - -:Authors: Tim Rozet (trozet@redhat.com) -:Authors: Dan Radez (dradez@redhat.com) -:Version: 3.0 - -Indices and tables -================== - -* :ref:`search` diff --git a/docs/installationprocedure/introduction.rst b/docs/installationprocedure/introduction.rst deleted file mode 100644 index cc489917..00000000 --- a/docs/installationprocedure/introduction.rst +++ /dev/null @@ -1,42 +0,0 @@ -Introduction -============ - -This document describes the steps to install an OPNFV Colorado reference -platform, as defined by the Genesis Project using the Apex installer. - -The audience is assumed to have a good background in networking -and Linux administration. - -Preface -======= - -Apex uses Triple-O from the RDO Project OpenStack distribution as a -provisioning tool. The Triple-O image based life cycle installation -tool provisions an OPNFV Target System (3 controllers, 2 or more -compute nodes) with OPNFV specific configuration provided by the Apex -deployment tool chain. - -The Apex deployment artifacts contain the necessary tools to deploy and -configure an OPNFV target system using the Apex deployment toolchain. -These artifacts offer the choice of using the Apex bootable ISO -(``opnfv-apex-colorado.iso``) to both install CentOS 7 and the -necessary materials to deploy or the Apex RPMs (``opnfv-apex*.rpm``), -and their associated dependencies, which expects installation to a -CentOS 7 libvirt enabled host. The RPM contains a collection of -configuration files, prebuilt disk images, and the automatic deployment -script (``opnfv-deploy``). - -An OPNFV install requires a "Jumphost" in order to operate. The bootable -ISO will allow you to install a customized CentOS 7 release to the Jumphost, -which includes the required packages needed to run ``opnfv-deploy``. -If you already have a Jumphost with CentOS 7 installed, you may choose to -skip the ISO step and simply install the (``opnfv-apex*.rpm``) RPMs. The RPMs -are the same RPMs included in the ISO and include all the necessary disk -images and configuration files to execute an OPNFV deployment. Either method -will prepare a host to the same ready state for OPNFV deployment. - -``opnfv-deploy`` instantiates a Triple-O Undercloud VM server using libvirt -as its provider. This VM is then configured and used to provision the -OPNFV target deployment (3 controllers, n compute nodes). These nodes can -be either virtual or bare metal. This guide contains instructions for -installing either method. diff --git a/docs/installationprocedure/references.rst b/docs/installationprocedure/references.rst deleted file mode 100644 index a63a8421..00000000 --- a/docs/installationprocedure/references.rst +++ /dev/null @@ -1,40 +0,0 @@ -Frequently Asked Questions -========================== - -License -======= - -All Apex and "common" entities are protected by the `Apache 2.0 License `_. - -References -========== - -OPNFV ------ - -`OPNFV Home Page `_ - -`OPNFV Genesis project page `_ - -`OPNFV Apex project page `_ - -`OPNFV Apex release notes `_ - -OpenStack ---------- - -`OpenStack Mitaka Release artifacts `_ - -`OpenStack documentation `_ - -OpenDaylight ------------- - -Upstream OpenDaylight provides `a number of packaging and deployment options `_ meant for consumption by downstream projects like OPNFV. - -Currently, OPNFV Apex uses `OpenDaylight's Puppet module `_, which in turn depends on `OpenDaylight's RPM `_. - -RDO Project ------------ - -`RDO Project website `_ diff --git a/docs/installationprocedure/requirements.rst b/docs/installationprocedure/requirements.rst deleted file mode 100644 index 507b671e..00000000 --- a/docs/installationprocedure/requirements.rst +++ /dev/null @@ -1,78 +0,0 @@ -Setup Requirements -================== - -Jumphost Requirements ---------------------- - -The Jumphost requirements are outlined below: - -1. CentOS 7 (from ISO or self-installed). - -2. Root access. - -3. libvirt virtualization support. - -4. minimum 1 networks and maximum 5 networks, multiple NIC and/or VLAN - combinations are supported. This is virtualized for a VM deployment. - -5. The Colorado Apex RPMs and their dependencies. - -6. 16 GB of RAM for a bare metal deployment, 64 GB of RAM for a VM - deployment. - -Network Requirements --------------------- - -Network requirements include: - -1. No DHCP or TFTP server running on networks used by OPNFV. - -2. 1-5 separate networks with connectivity between Jumphost and nodes. - - - Control Plane (Provisioning) - - - Private Tenant-Networking Network* - - - External Network* - - - Storage Network* - - - Internal API Network* (required for IPv6 \*\*) - -3. Lights out OOB network access from Jumphost with IPMI node enabled - (bare metal deployment only). - -4. External network is a routable network from outside the cloud, - deployment. The External network is where public internet access would - reside if available. - -\*These networks can be combined with each other or all combined on the -Control Plane network. - -\*\*Internal API network, by default, is collapsed with provisioning in IPv4 -deployments, this is not possible with the current lack of PXE boot -support and therefore the API network is required to be its own -network in an IPv6 deployment. - -Bare Metal Node Requirements ----------------------------- - -Bare metal nodes require: - -1. IPMI enabled on OOB interface for power control. - -2. BIOS boot priority should be PXE first then local hard disk. - -3. BIOS PXE interface should include Control Plane network mentioned above. - -Execution Requirements (Bare Metal Only) ----------------------------------------- - -In order to execute a deployment, one must gather the following information: - -1. IPMI IP addresses for the nodes. - -2. IPMI login information for the nodes (user/pass). - -3. MAC address of Control Plane / Provisioning interfaces of the overcloud - nodes. diff --git a/docs/installationprocedure/troubleshooting.rst b/docs/installationprocedure/troubleshooting.rst deleted file mode 100644 index ed0d1ff6..00000000 --- a/docs/installationprocedure/troubleshooting.rst +++ /dev/null @@ -1,144 +0,0 @@ -Developer Guide and Troubleshooting -=================================== - -This section aims to explain in more detail the steps that Apex follows -to make a deployment. It also tries to explain possible issues you might find -in the process of building or deploying an environment. - -After installing the Apex RPMs in the jumphost, some files will be located -around the system. - -1. /etc/opnfv-apex: this directory contains a bunch of scenarios to be - deployed with different characteristics such HA (High Availability), SDN - controller integration (OpenDaylight/ONOS), BGPVPN, FDIO, etc. Having a - look at any of these files will give you an idea of how to make a - customized scenario setting up different flags. - -2. /usr/bin/: it contains the binaries for the commands opnfv-deploy, - opnfv-clean and opnfv-util. - -3. /var/opt/opnfv/: it contains several files and directories. - - 3.1. images/: this folder contains the images that will be deployed - according to the chosen scenario. - - 3.2. lib/: bunch of scripts that will be executed in the different phases - of deployment. - - -Utilization of Images ---------------------- - -As mentioned earlier in this guide, the Undercloud VM will be in charge of -deploying OPNFV (Overcloud VMs). Since the Undercloud is an all-in-one -OpenStack deployment, it will use Glance to manage the images that will be -deployed as the Overcloud. - -So whatever customization that is done to the images located in the jumpserver -(/var/opt/opnfv/images) will be uploaded to the undercloud and consequently, to -the overcloud. - -Make sure, the customization is performed on the right image. For example, if I -virt-customize the following image overcloud-full-opendaylight.qcow2, but then -I deploy OPNFV with the following command: - - ``sudo opnfv-deploy -n network_settings.yaml -d - /etc/opnfv-apex/os-onos-nofeature-ha.yaml`` - -It will not have any effect over the deployment, since the customized image is -the opendaylight one, and the scenario indicates that the image to be deployed -is the overcloud-full-onos.qcow2. - - -Post-deployment Configuration ------------------------------ - -Post-deployment scripts will perform some configuration tasks such ssh-key -injection, network configuration, NATing, OpenVswitch creation. It will take -care of some OpenStack tasks such creation of endpoints, external networks, -users, projects, etc. - -If any of these steps fail, the execution will be interrupted. In some cases, -the interruption occurs at very early stages, so a new deployment must be -executed. However, some other cases it could be worth it to try to debug it. - - 1. There is not external connectivity from the overcloud nodes: - - Post-deployment scripts will configure the routing, nameservers - and a bunch of other things between the overcloud and the - undercloud. If local connectivity, like pinging between the - different nodes, is working fine, script must have failed when - configuring the NAT via iptables. The main rules to enable - external connectivity would look like these: - - ``iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE`` - ``iptables -t nat -A POSTROUTING -s ${external_cidr} -o eth0 -j - MASQUERADE`` - ``iptables -A FORWARD -i eth2 -j ACCEPT`` - ``iptables -A FORWARD -s ${external_cidr} -m state --state - ESTABLISHED,RELATED -j ACCEPT`` - ``service iptables save`` - - These rules must be executed as root (or sudo) in the - undercloud machine. - -OpenDaylight Integration ------------------------- - -When a user deploys any of the following scenarios: - - - os-odl-bgpvpn-ha.yaml - - os-odl_l2-fdio-ha.yaml - - os-odl_l2-fdio-noha.yaml - - os-odl_l2-nofeature-ha.yaml - - os-odl_l2-sfc-noha.yaml - - os-odl_l3-nofeature-ha.yaml - -OpenDaylight (ODL) SDN controller will be deployed too and completely -integrated with OpenStack. ODL is running as a systemd service, so you can -manage it as a regular service: - - ``systemctl start/restart/stop opendaylight.service`` - -This command must be executed as root in the controller node of the overcloud, -where OpenDaylight is running. ODL files are located in /opt/opendaylight. ODL -uses karaf as a Java container management system that allows the users to -install new features, check logs and configure a lot of things. In order to -connect to Karaf's console, use the following command: - - ``opnfv-util opendaylight`` - -This command is very easy to use, but in case it is not connecting to Karaf, -this is the command that is executing underneath: - - ``ssh -p 8101 -o UserKnownHostsFile=/dev/null -o - StrictHostKeyChecking=no karaf@localhost`` - -Of course, localhost when the command is executed in the overcloud controller, -but you use its public IP to connect from elsewhere. - -Debugging Failures ------------------- - -This section will try to gather different type of failures, the root cause and -some possible solutions or workarounds to get the process continued. - -1. I can see in the output log a post-deployment error messages: - - Heat resources will apply puppet manifests during this phase. If one of - these processes fail, you could try to see the error and after that, - re-run puppet to apply that manifest. Log into the controller (see - verification section for that) and check as root /var/log/messages. - Search for the error you have encountered and see if you can fix it. In - order to re-run the puppet manifest, search for "puppet apply" in that - same log. You will have to run the last "puppet apply" before the - error. And It should look like this: - - ``FACTER_heat_outputs_path="/var/run/heat-config/heat-config-puppet/5b4c7a01-0d63-4a71-81e9-d5ee6f0a1f2f" FACTER_fqdn="overcloud-controller-0.localdomain.com" \ - FACTER_deploy_config_name="ControllerOvercloudServicesDeployment_Step4" puppet apply --detailed-exitcodes -l syslog -l console \ - /var/lib/heat-config/heat-config-puppet/5b4c7a01-0d63-4a71-81e9-d5ee6f0a1f2f.pp`` - - As a comment, Heat will trigger the puppet run via os-apply-config and - it will pass a different value for step each time. There is a total of - five steps. Some of these steps will not be executed depending on the - type of scenario that is being deployed. diff --git a/docs/installationprocedure/verification.rst b/docs/installationprocedure/verification.rst deleted file mode 100644 index 81e4c8e4..00000000 --- a/docs/installationprocedure/verification.rst +++ /dev/null @@ -1,89 +0,0 @@ -Verifying the Setup -------------------- - -Once the deployment has finished, the OPNFV deployment can be accessed via the -undercloud node. From the jump host ssh to the undercloud host and become the -stack user. Alternativly ssh keys have been setup such that the root user on -the jump host can ssh to undercloud directly as the stack user. For -convenience a utility script has been provided to look up the undercloud's ip -address and ssh to the undercloud all in one command. An optional user name can -be passed to indicate whether to connect as the stack or root user. The stack -user is default if a username is not specified. - -| ``opnfv-util undercloud root`` -| ``su - stack`` - -Once connected to undercloud as the stack user look for two keystone files that -can be used to interact with the undercloud and the overcloud. Source the -appropriate RC file to interact with the respective OpenStack deployment. - -| ``source stackrc`` (undercloud) -| ``source overcloudrc`` (overcloud / OPNFV) - -The contents of these files include the credentials for the administrative user -for undercloud and OPNFV respectivly. At this point both undercloud and OPNFV -can be interacted with just as any OpenStack installation can be. Start by -listing the nodes in the undercloud that were used to deploy the overcloud. - -| ``source stackrc`` -| ``openstack server list`` - -The control and compute nodes will be listed in the output of this server list -command. The IP addresses that are listed are the control plane addresses that -were used to provision the nodes. Use these IP addresses to connect to these -nodes. Initial authentication requires using the user heat-admin. - -| ``ssh heat-admin@192.0.2.7`` - -To begin creating users, images, networks, servers, etc in OPNFV source the -overcloudrc file or retrieve the admin user's credentials from the overcloudrc -file and connect to the web Dashboard. - - -You are now able to follow the `OpenStack Verification`_ section. - -OpenStack Verification ----------------------- - -Once connected to the OPNFV Dashboard make sure the OPNFV target system is -working correctly: - -1. In the left pane, click Compute -> Images, click Create Image. - -2. Insert a name "cirros", Insert an Image Location - ``http://download.cirros-cloud.net/0.3.4/cirros-0.3.4-x86_64-disk.img``. - -3. Select format "QCOW2", select Public, then click Create Image. - -4. Now click Project -> Network -> Networks, click Create Network. - -5. Enter a name "internal", click Next. - -6. Enter a subnet name "internal_subnet", and enter Network Address - ``172.16.1.0/24``, click Next. - -7. Now go to Project -> Compute -> Instances, click Launch Instance. - -8. Enter Instance Name "first_instance", select Instance Boot Source - "Boot from image", and then select Image Name "cirros". - -9. Click Launch, status will cycle though a couple states before becoming - "Active". - -10. Steps 7 though 9 can be repeated to launch more instances. - -11. Once an instance becomes "Active" their IP addresses will display on the - Instances page. - -12. Click the name of an instance, then the "Console" tab and login as - "cirros"/"cubswin:)" - -13. To verify storage is working, - click Project -> Compute -> Volumes, Create Volume - -14. Give the volume a name and a size of 1 GB - -15. Once the volume becomes "Available" click the dropdown arrow and attach it - to an instance. - -Congratulations you have successfully installed OPNFV! diff --git a/docs/installationprocedure/virtualinstall.rst b/docs/installationprocedure/virtualinstall.rst deleted file mode 100644 index 5da2ee3c..00000000 --- a/docs/installationprocedure/virtualinstall.rst +++ /dev/null @@ -1,69 +0,0 @@ -Installation High-Level Overview - Virtual Deployment -===================================================== - -The VM nodes deployment operates almost the same way as the bare metal -deployment with a few differences. ``opnfv-deploy`` still deploys an -undercloud VM. In addition to the undercloud VM a collection of VMs -(3 control nodes + 2 compute for an HA deployment or 1 control node and 1 -or more compute nodes for a non-HA Deployment) will be defined for the target -OPNFV deployment. The part of the toolchain that executes IPMI power -instructions calls into libvirt instead of the IPMI interfaces on baremetal -servers to operate the power managment. These VMs are then provisioned with -the same disk images and configuration that baremetal would be. To Triple-O -these nodes look like they have just built and registered the same way as bare -metal nodes, the main difference is the use of a libvirt driver for the power -management. Finally, the default network_settings file will deploy without -modification. Customizations are welcome but not needed if a generic set of -network_settings are acceptable. - -Installation Guide - Virtual Deployment -======================================= - -This section goes step-by-step on how to correctly install and provision the -OPNFV target system to VM nodes. - -Install Jumphost ----------------- - -Follow the instructions in the `Install Bare Metal Jumphost`_ section. - -Running ``opnfv-deploy`` ------------------------- - -You are now ready to deploy OPNFV! -``opnfv-deploy`` has virtual deployment capability that includes all of -the configuration nessesary to deploy OPNFV with no modifications. - -If no modifications are made to the included configurations the target -environment will deploy with the following architecture: - - - 1 undercloud VM - - - The option of 3 control and 2 or more compute VMs (HA Deploy / default) - or 1 control and 1 or more compute VM (Non-HA deploy / pass -n) - - - 1-5 networks: provisioning, private tenant networking, external, storage - and internal API. The API, storage and tenant networking networks can be - collapsed onto the provisioning network. - -Follow the steps below to execute: - -1. ``sudo opnfv-deploy -v [ --virtual-computes n ] - [ --virtual-cpus n ] [ --virtual-ram n ] - -n network_settings.yaml -d deploy_settings.yaml`` - -2. It will take approximately 45 minutes to an hour to stand up undercloud, - define the target virtual machines, configure the deployment and execute - the deployment. You will notice different outputs in your shell. - -3. When the deployment is complete the IP for the undercloud and a url for the - OpenStack dashboard will be displayed - -Verifying the Setup - VMs -------------------------- - -To verify the set you can follow the instructions in the `Verifying the Setup`_ -section. - -.. _`Install Bare Metal Jumphost`: index.html#install-bare-metal-jumphost -.. _`Verifying the Setup`: index.html#verifying-the-setup -- cgit 1.2.3-korg