summaryrefslogtreecommitdiffstats
path: root/config/network/network_settings_vpp.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'config/network/network_settings_vpp.yaml')
-rw-r--r--config/network/network_settings_vpp.yaml221
1 files changed, 221 insertions, 0 deletions
diff --git a/config/network/network_settings_vpp.yaml b/config/network/network_settings_vpp.yaml
new file mode 100644
index 00000000..4b50745f
--- /dev/null
+++ b/config/network/network_settings_vpp.yaml
@@ -0,0 +1,221 @@
+# This configuration file defines Network Environment for a
+# Baremetal Deployment of OPNFV. It contains default values
+# for 5 following networks:
+#
+# - admin
+# - tenant*
+# - external*
+# - storage*
+# - api*
+# *) optional networks
+#
+# Optional networks will be consolidated with the admin network
+# if not explicitly configured.
+#
+# See short description of the networks in the comments below.
+#
+# "admin" is the short name for Control Plane Network.
+# This network should be IPv4 even it is an IPv6 deployment
+# IPv6 does not have PXE boot support.
+# During OPNFV deployment it is used for node provisioning which will require
+# PXE booting as well as running a DHCP server on this network. Be sure to
+# disable any other DHCP/TFTP server on this network.
+#
+# "tenant" is the network used for tenant traffic.
+#
+# "external" is the network which should have internet or external
+# connectivity. External OpenStack networks will be configured to egress this
+# network. There can be multiple external networks, but only one assigned as
+# "public" which OpenStack public API's will register.
+#
+# "storage" is the network for storage I/O.
+#
+# "api" is an optional network for splitting out OpenStack service API
+# communication. This should be used for IPv6 deployments.
+
+
+#Meta data for the network configuration
+network-config-metadata:
+ title: LF-POD-1 Network config
+ version: 0.1
+ created: Mon Dec 28 2015
+ comment: None
+
+# DNS Settings
+dns-domain: opnfvlf.org
+dns-search: opnfvlf.org
+dns_nameservers:
+ - 8.8.8.8
+ - 8.8.4.4
+# NTP servers
+ntp:
+ - 0.se.pool.ntp.org
+ - 1.se.pool.ntp.org
+# Syslog server
+syslog:
+ server: 10.128.1.24
+ transport: 'tcp'
+
+# Common network settings
+networks: # Network configurations
+ admin: # Admin configuration (pxe and jumpstart),
+ enabled: true
+ installer_vm: # Network settings for the Installer VM on admin network
+ nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
+ members:
+ - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
+ vlan: native # VLAN tag to use for this network on Installer VM, native means none
+ ip: 192.0.2.1 # IP to assign to Installer VM on this network
+ overcloud_ip_range:
+ - 192.0.2.11
+ - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be
+ # used for host bridge (i.e. br-admin). If empty entire range is usable.
+ # Cannot overlap with dhcp_range or introspection_range.
+ gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled)
+ cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24
+ dhcp_range:
+ - 192.0.2.2
+ - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: interface # Physical interface type (interface or bond)
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - eth0
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: interface
+ members:
+ - eth0
+ #
+ tenant: # Tenant network configuration
+ enabled: true
+ cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24
+ mtu: 1500 # Tenant network MTU
+ overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range:
+ # VNI, VLAN-ID, etc.
+ segmentation_type: vxlan # Tenant network segmentation type:
+ # vlan, vxlan, gre
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: vpp_interface # Physical interface type (interface/vpp_interface)
+ uio_driver: uio_pci_generic # uio driver, for vpp interfaces only
+ vlan: native # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - eth1 # Note that logic nic name like nic1 cannot be used for fdio deployment yet.
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: vpp_interface # Physical interface type (interface/vpp_interface)
+ uio_driver: uio_pci_generic # uio driver, for vpp interfaces only
+ vlan: native
+ members:
+ - eth1 # Note that logic nic name like nic1 cannot be used for fdio deployment yet.
+ #
+ external: # Can contain 1 or more external networks
+ - public: # "public" network will be the network the installer VM attaches to
+ enabled: true
+ mtu: 1500 # Public network MTU
+ installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
+ nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
+ vlan: native
+ members:
+ - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
+ ip: 192.168.37.1 # IP to assign to Installer VM on this network
+ cidr: 192.168.37.0/24
+ gateway: 192.168.37.1
+ floating_ip_range:
+ - 192.168.37.200
+ - 192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron
+ overcloud_ip_range:
+ - 192.168.37.10
+ - 192.168.37.199 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be used for host
+ # bridge (i.e. br-public). If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range.
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: interface # Physical interface type (interface or bond)
+ vlan: native # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - eth2
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: interface
+ vlan: native
+ members:
+ - eth2
+ external_overlay: # External network to be created in OpenStack by Services tenant
+ name: Public_internet
+ type: flat
+ gateway: 192.168.37.1
+ - private_cloud: # another external network
+ enabled: false
+ mtu: 1500
+ installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
+ nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
+ vlan: 101
+ members:
+ - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
+ ip: 192.168.38.1 # IP to assign to Installer VM on this network
+ cidr: 192.168.38.0/24
+ gateway: 192.168.38.1
+ floating_ip_range:
+ - 192.168.38.200
+ - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron
+ overcloud_ip_range:
+ - 192.168.38.10
+ - 192.168.38.199 # Usable IP range for overcloud nodes (including VIPs), usually this is a shared subnet.
+ # Cannot overlap with dhcp_range or introspection_range.
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: interface # Physical interface type (interface or bond)
+ vlan: 101 # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - eth3 # Note that logic nic name like nic1 cannot be used for fdio deployment yet.
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: interface
+ vlan: 101
+ members:
+ - eth3
+ external_overlay: # External network to be created in OpenStack by Services tenant
+ name: private_cloud
+ type: vlan
+ segmentation_id: 101
+ gateway: 192.168.38.1
+ #
+ storage: # Storage network configuration
+ enabled: true
+ cidr: 12.0.0.0/24 # Subnet in CIDR format
+ mtu: 1500 # Storage network MTU
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: interface # Physical interface type (interface or bond)
+ vlan: native # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - eth3 # Note that logic nic name like nic1 cannot be used for fdio deployment yet.
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: interface
+ vlan: native
+ members:
+ - eth3
+ #
+ api: # API network configuration
+ enabled: false
+ cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format
+ vlan: 13 # VLAN tag to use for Overcloud hosts on this network
+ mtu: 1500 # Api network MTU
+ nic_mapping: # Mapping of network configuration for Overcloud Nodes
+ compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
+ phys_type: interface # Physical interface type (interface or bond)
+ vlan: native # VLAN tag to use with this NIC
+ members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - eth4 # Note that logic nic name like nic1 cannot be used for fdio deployment yet.
+ controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ phys_type: interface
+ vlan: native
+ members:
+ - eth4
+
+# Apex specific settings
+apex:
+ networks:
+ admin:
+ introspection_range:
+ - 192.0.2.100
+ - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or overcloud_ip_range.
+ # If the external network 'public' is disabled, then this range will be re-used to configure the floating ip range
+ # for the overcloud default external network