summaryrefslogtreecommitdiffstats
path: root/config/network/network_settings_vpp.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'config/network/network_settings_vpp.yaml')
-rw-r--r--config/network/network_settings_vpp.yaml314
1 files changed, 0 insertions, 314 deletions
diff --git a/config/network/network_settings_vpp.yaml b/config/network/network_settings_vpp.yaml
deleted file mode 100644
index 2f6bba5e..00000000
--- a/config/network/network_settings_vpp.yaml
+++ /dev/null
@@ -1,314 +0,0 @@
----
-# This configuration file defines Network Environment for a
-# Baremetal Deployment of OPNFV. It contains default values
-# for 5 following networks:
-#
-# - admin
-# - tenant*
-# - external*
-# - storage*
-# - api*
-# *) optional networks
-#
-# Optional networks will be consolidated with the admin network
-# if not explicitly configured.
-#
-# See short description of the networks in the comments below.
-#
-# "admin" is the short name for Control Plane Network.
-# This network should be IPv4 even it is an IPv6 deployment
-# IPv6 does not have PXE boot support.
-# During OPNFV deployment it is used for node provisioning which will require
-# PXE booting as well as running a DHCP server on this network. Be sure to
-# disable any other DHCP/TFTP server on this network.
-#
-# "tenant" is the network used for tenant traffic.
-#
-# "external" is the network which should have internet or external
-# connectivity. External OpenStack networks will be configured to egress this
-# network. There can be multiple external networks, but only one assigned as
-# "public" which OpenStack public API's will register.
-#
-# "storage" is the network for storage I/O.
-#
-# "api" is an optional network for splitting out OpenStack service API
-# communication. This should be used for IPv6 deployments.
-
-
-# Meta data for the network configuration
-network-config-metadata:
- title: LF-POD-1 Network config
- version: 0.1
- created: Mon Dec 28 2015
- comment: None
-
-# DNS Settings
-dns-domain: opnfvlf.org
-dns-search: opnfvlf.org
-dns_nameservers:
- - 8.8.8.8
- - 8.8.4.4
-# NTP servers
-ntp:
- - 0.se.pool.ntp.org
- - 1.se.pool.ntp.org
-# Syslog server
-syslog:
- server: 10.128.1.24
- transport: 'tcp'
-
-# Common network settings
-networks:
- # Admin configuration (pxe and jumpstart)
- admin:
- enabled: true
- # Network settings for the Installer VM on admin network
- installer_vm:
- # Indicates if this VM will be bridged to an interface, or to a bond
- nic_type: interface
- # Interfaces to bridge for installer VM (use multiple values for bond)
- members:
- - em1
- # VLAN tag to use for this network on Installer VM, native means none
- vlan: native
- # IP to assign to Installer VM on this network
- ip: 192.0.2.1
- # Usable ip range for the overcloud node IPs (including VIPs)
- # Last IP is used for host bridge (i.e. br-admin).
- # If empty entire range is usable.
- # Cannot overlap with dhcp_range or introspection_range.
- overcloud_ip_range:
- - 192.0.2.51
- - 192.0.2.99
- # Gateway (only needed when public_network is disabled)
- gateway: 192.0.2.1
- # Subnet in CIDR format 192.168.1.0/24
- cidr: 192.0.2.0/24
- # DHCP range for the admin network, automatically provisioned if empty
- dhcp_range:
- - 192.0.2.2
- - 192.0.2.50
- # Mapping of network configuration for Overcloud Nodes
- nic_mapping:
- # Mapping for compute profile (nodes assigned as Compute nodes)
- compute:
- # Physical interface type (interface or bond)
- phys_type: interface
- # Physical NIC members (Single value allowed for phys_type: interface)
- members:
- - eth0
- # Mapping for controller profile (nodes assigned as Controller nodes)
- controller:
- phys_type: interface
- members:
- - eth0
-
- # Tenant network configuration
- tenant:
- enabled: true
- # Subnet in CIDR format 192.168.1.0/24
- cidr: 11.0.0.0/24
- # Tenant network MTU
- mtu: 1500
- # Tenant network Overlay segmentation ID range:
- # VNI, VLAN-ID, etc.
- overlay_id_range: 2,65535
-
- # Tenant network segmentation type:
- # vlan, vxlan, gre
- segmentation_type: vxlan
- # Mapping of network configuration for Overcloud Nodes
- nic_mapping:
- # Mapping for compute profile (nodes assigned as Compute nodes)
- compute:
- # Physical interface type (interface/bond)
- phys_type: interface
- # VLAN tag to use with this NIC
- vlan: native
- # Physical NIC members of this mapping
- # Single value allowed for phys_type: interface
- members:
- # Note logical name like nic1 not valid for fdio deployment yet.
- - eth1
- # Mapping for controller profile (nodes assigned as Controller nodes)
- controller:
- # Physical interface type (interface/bond)
- phys_type: interface
- vlan: native
- # Note: logicial names like nic1 are not valid for fdio deployment yet.
- members:
- - eth1
-
- # Can contain 1 or more external networks
- external:
- - public:
- enabled: true
- # Public network MTU
- mtu: 1500
- # Network settings for the Installer VM on external network
- # (note only valid on 'public' external network)
- installer_vm:
- # Indicates if this VM will be bridged to an interface, or to a bond
- nic_type: interface
- vlan: native
- # Interfaces to bridge for installer VM (use multiple values for bond)
- members:
- - em1
- # IP to assign to Installer VM on this network
- ip: 192.168.37.1
- cidr: 192.168.37.0/24
- gateway: 192.168.37.1
- # Range to allocate to floating IPs for the public network with Neutron
- floating_ip_range:
- - 192.168.37.200
- - 192.168.37.220
- # Usable ip range for the overcloud node IPs (including VIPs)
- # Last IP will be used for host bridge (i.e. br-public).
- # If empty entire range is usable.
- # Cannot overlap with dhcp_range or introspection_range.
- overcloud_ip_range:
- - 192.168.37.10
- - 192.168.37.199
- # Mapping of network configuration for Overcloud Nodes
- nic_mapping:
- # Mapping for compute profile (nodes assigned as Compute nodes)
- compute:
- # Physical interface type (interface or bond)
- phys_type: interface
- # VLAN tag to use with this NIC
- vlan: native
- # Physical NIC members of this mapping
- # Single value allowed for phys_type: interface
- members:
- - eth2
- # Mapping for controller profile (nodes assigned as Controller nodes)
- controller:
- phys_type: interface
- vlan: native
- members:
- - eth2
- # External network to be created in OpenStack by Services tenant
- external_overlay:
- name: Public_internet
- type: flat
- gateway: 192.168.37.1
- # another external network
- # This is an example and not yet supported
- - private_cloud:
- enabled: false
- mtu: 1500
- # Network settings for the Installer VM on external network
- # note only valid on 'public' external network
- installer_vm:
- # Indicates if this VM will be bridged to an interface, or to a bond
- nic_type: interface
- vlan: 101
- # Interfaces to bridge for installer VM (use multiple values for bond)
- members:
- - em1
- # IP to assign to Installer VM on this network
- ip: 192.168.38.1
- cidr: 192.168.38.0/24
- gateway: 192.168.38.1
- # Range to allocate to floating IPs for the public network with Neutron
- floating_ip_range:
- - 192.168.38.200
- - 192.168.38.220
- # Usable IP range for overcloud nodes (including VIPs)i
- # usually this is a shared subnet.
- # Cannot overlap with dhcp_range or introspection_range.
- overcloud_ip_range:
- - 192.168.38.10
- - 192.168.38.199
- # Mapping of network configuration for Overcloud Nodes
- nic_mapping:
- # Mapping for compute profile (nodes assigned as Compute nodes)
- compute:
- # Physical interface type (interface or bond)
- phys_type: interface
- # VLAN tag to use with this NIC
- vlan: 101
- # Physical NIC members of this mappingi
- # Single value allowed for phys_type: interface
- # Note: logical names like nic1 are not valid for fdio deployment yet.
- members:
- - eth3
- # Mapping for controller profile (nodes assigned as Controller nodes)
- controller:
- phys_type: interface
- vlan: 101
- members:
- - eth3
- # External network to be created in OpenStack by Services tenant
- external_overlay:
- name: private_cloud
- type: vlan
- segmentation_id: 101
- gateway: 192.168.38.1
-
- # Storage network configuration
- storage:
- enabled: true
- # Subnet in CIDR format
- cidr: 12.0.0.0/24
- # Storage network MTU
- mtu: 1500
- # Mapping of network configuration for Overcloud Nodes
- nic_mapping:
- # Mapping for compute profile (nodes assigned as Compute nodes)
- compute:
- # Physical interface type (interface or bond)
- phys_type: interface
- # VLAN tag to use with this NIC
- vlan: native
- # Physical NIC members of this mapping
- # Single value allowed for phys_type: interface
- members:
- # Note logical names like nic1 not valid for fdio deployment yet.
- - eth3
- # Mapping for controller profile (nodes assigned as Controller nodes)
- controller:
- phys_type: interface
- vlan: native
- members:
- - eth3
-
- api:
- # API network configuration
- enabled: false
- # Subnet in CIDR format
- cidr: fd00:fd00:fd00:4000::/64
- # VLAN tag to use for Overcloud hosts on this network
- vlan: 13
- # Api network MTU
- mtu: 1500
- # Mapping of network configuration for Overcloud Nodes
- nic_mapping:
- # Mapping for compute profile (nodes assigned as Compute nodes)
- compute:
- # Physical interface type (interface or bond)
- phys_type: interface
- # VLAN tag to use with this NIC
- vlan: native
- # Physical NIC members of this mapping
- # Single value allowed for phys_type: interface
- # Note logical names like nic1 not valid for fdio deployment yet.
- members:
- - eth4
- # Mapping for controller profile (nodes assigned as Controller nodes)
- controller:
- phys_type: interface
- vlan: native
- members:
- - eth4
-
-# Apex specific settings
-apex:
- networks:
- admin:
- # Range used for introspection phase (examining nodes).
- # This cannot overlap with dhcp_range or overcloud_ip_range.
- # for the overcloud default external network
- introspection_range:
- - 192.0.2.100
- - 192.0.2.120