summaryrefslogtreecommitdiffstats
path: root/config/network/network_settings.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'config/network/network_settings.yaml')
-rw-r--r--config/network/network_settings.yaml305
1 files changed, 201 insertions, 104 deletions
diff --git a/config/network/network_settings.yaml b/config/network/network_settings.yaml
index ba78439..8875334 100644
--- a/config/network/network_settings.yaml
+++ b/config/network/network_settings.yaml
@@ -1,3 +1,4 @@
+---
# This configuration file defines Network Environment for a
# Baremetal Deployment of OPNFV. It contains default values
# for 5 following networks:
@@ -34,7 +35,7 @@
# communication. This should be used for IPv6 deployments.
-#Meta data for the network configuration
+# Meta data for the network configuration
network-config-metadata:
title: LF-POD-1 Network config
version: 0.1
@@ -57,153 +58,248 @@ syslog:
transport: 'tcp'
# Common network settings
-networks: # Network configurations
- admin: # Admin configuration (pxe and jumpstart),
+networks:
+ # Admin configuration (pxe and jumpstart)
+ admin:
enabled: true
- installer_vm: # Network settings for the Installer VM on admin network
- nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
+ # Network settings for the Installer VM on admin network
+ installer_vm:
+ # Indicates if this VM will be bridged to an interface, or to a bond
+ nic_type: interface
+ # Interfaces to bridge for installer VM (use multiple values for bond)
members:
- - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
- vlan: native # VLAN tag to use for this network on Installer VM, native means none
- ip: 192.0.2.1 # IP to assign to Installer VM on this network
+ - em1
+ # VLAN tag to use for this network on Installer VM, native means none
+ vlan: native
+ # IP to assign to Installer VM on this network
+ ip: 192.0.2.1
+ # Usable ip range for the overcloud node IPs (including VIPs)
+ # Last IP is used for host bridge (i.e. br-admin).
+ # If empty entire range is usable.
+ # Cannot overlap with dhcp_range or introspection_range.
overcloud_ip_range:
- 192.0.2.11
- - 192.0.2.99 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be
- # used for host bridge (i.e. br-admin). If empty entire range is usable.
- # Cannot overlap with dhcp_range or introspection_range.
- gateway: 192.0.2.1 # Gateway (only needed when public_network is disabled)
- cidr: 192.0.2.0/24 # Subnet in CIDR format 192.168.1.0/24
+ - 192.0.2.99
+ # Gateway (only needed when public_network is disabled)
+ gateway: 192.0.2.1
+ # Subnet in CIDR format 192.168.1.0/24
+ cidr: 192.0.2.0/24
+ # DHCP range for the admin network, automatically provisioned if empty
dhcp_range:
- 192.0.2.2
- - 192.0.2.10 # DHCP range for the admin network, if empty it will be automatically provisioned
- nic_mapping: # Mapping of network configuration for Overcloud Nodes
- compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
- phys_type: interface # Physical interface type (interface or bond)
- members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - 192.0.2.10
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
+ phys_type: interface
+ # Physical NIC members (Single value allowed for phys_type: interface)
+ members:
- eth0
- controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
phys_type: interface
members:
- eth0
- #
- tenant: # Tenant network configuration
+
+ # Tenant network configuration
+ tenant:
enabled: true
- cidr: 11.0.0.0/24 # Subnet in CIDR format 192.168.1.0/24
- mtu: 1500 # Tenant network MTU
- overlay_id_range: 2,65535 # Tenant network Overlay segmentation ID range:
- # VNI, VLAN-ID, etc.
- segmentation_type: vxlan # Tenant network segmentation type:
- # vlan, vxlan, gre
- nic_mapping: # Mapping of network configuration for Overcloud Nodes
- compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
- phys_type: interface # Physical interface type (interface or bond)
- uio_driver: uio_pci_generic # UIO driver to use for DPDK scenarios. The value is ignored for non-DPDK scenarios.
- vlan: native # VLAN tag to use with this NIC
- members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
- - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
- controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ # Subnet in CIDR format 192.168.1.0/24
+ cidr: 11.0.0.0/24
+ # Tenant network MTU
+ mtu: 1500
+ # Tenant network Overlay segmentation ID range:
+ # VNI, VLAN-ID, etc.
+ overlay_id_range: 2,65535
+
+ # Tenant network segmentation type:
+ # vlan, vxlan, gre
+ segmentation_type: vxlan
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface/bond)
+ phys_type: interface
+ # UIO driver to use for DPDK scenarios.
+ # The value is ignored for non-DPDK scenarios.
+ uio_driver: uio_pci_generic
+ # VLAN tag to use with this NIC
+ vlan: native
+ # Physical NIC members of this mapping
+ # Single value allowed for phys_type: interface
+ members:
+ # Note logical name like nic1 not valid for fdio deployment yet.
+ - eth1
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
+ # Physical interface type (interface/bond)
phys_type: interface
vlan: native
+ # Note: logicial names like nic1 are not valid for fdio deployment yet.
members:
- - eth1 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
- #
- external: # Can contain 1 or more external networks
- - public: # "public" network will be the network the installer VM attaches to
+ - eth1
+
+ # Can contain 1 or more external networks
+ external:
+ - public:
enabled: true
- mtu: 1500 # Public network MTU
- installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
- nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
+ # Public network MTU
+ mtu: 1500
+ # Network settings for the Installer VM on external network
+ # (note only valid on 'public' external network)
+ installer_vm:
+ # Indicates if this VM will be bridged to an interface, or to a bond
+ nic_type: interface
vlan: native
+ # Interfaces to bridge for installer VM (use multiple values for bond)
members:
- - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
- ip: 192.168.37.1 # IP to assign to Installer VM on this network
+ - em1
+ # IP to assign to Installer VM on this network
+ ip: 192.168.37.1
cidr: 192.168.37.0/24
gateway: 192.168.37.1
+ # Range to allocate to floating IPs for the public network with Neutron
floating_ip_range:
- 192.168.37.200
- - 192.168.37.220 # Range to allocate to floating IPs for the public network with Neutron
+ - 192.168.37.220
+ # Usable ip range for the overcloud node IPs (including VIPs)
+ # Last IP will be used for host bridge (i.e. br-public).
+ # If empty entire range is usable.
+ # Cannot overlap with dhcp_range or introspection_range.
overcloud_ip_range:
- 192.168.37.10
- - 192.168.37.199 # Usable ip range for the overcloud node IPs (including VIPs) and last IP will be used for host
- # bridge (i.e. br-public). If empty entire range is usable. Cannot overlap with dhcp_range or introspection_range.
- nic_mapping: # Mapping of network configuration for Overcloud Nodes
- compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
- phys_type: interface # Physical interface type (interface or bond)
- vlan: native # VLAN tag to use with this NIC
- members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
+ - 192.168.37.199
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
+ phys_type: interface
+ # VLAN tag to use with this NIC
+ vlan: native
+ # Physical NIC members of this mapping
+ # Single value allowed for phys_type: interface
+ members:
- eth2
- controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
phys_type: interface
vlan: native
members:
- eth2
- external_overlay: # External network to be created in OpenStack by Services tenant
- name: Public_internet
- type: flat
- gateway: 192.168.37.1
- - private_cloud: # another external network
+ # External network to be created in OpenStack by Services tenant
+ external_overlay:
+ name: Public_internet
+ type: flat
+ gateway: 192.168.37.1
+ # another external network
+ # This is an example and not yet supported
+ - private_cloud:
enabled: false
mtu: 1500
- installer_vm: # Network settings for the Installer VM on admin network (note only valid on 'public' external network)
- nic_type: interface # Indicates if this VM will be bridged to an interface, or to a bond
+ # Network settings for the Installer VM on external network
+ # note only valid on 'public' external network
+ installer_vm:
+ # Indicates if this VM will be bridged to an interface, or to a bond
+ nic_type: interface
vlan: 101
+ # Interfaces to bridge for installer VM (use multiple values for bond)
members:
- - em1 # Member Interface to bridge to for installer VM (use multiple values for bond)
- ip: 192.168.38.1 # IP to assign to Installer VM on this network
+ - em1
+ # IP to assign to Installer VM on this network
+ ip: 192.168.38.1
cidr: 192.168.38.0/24
gateway: 192.168.38.1
+ # Range to allocate to floating IPs for the public network with Neutron
floating_ip_range:
- 192.168.38.200
- - 192.168.38.220 # Range to allocate to floating IPs for the public network with Neutron
+ - 192.168.38.220
+ # Usable IP range for overcloud nodes (including VIPs)i
+ # usually this is a shared subnet.
+ # Cannot overlap with dhcp_range or introspection_range.
overcloud_ip_range:
- 192.168.38.10
- - 192.168.38.199 # Usable IP range for overcloud nodes (including VIPs), usually this is a shared subnet.
- # Cannot overlap with dhcp_range or introspection_range.
- nic_mapping: # Mapping of network configuration for Overcloud Nodes
- compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
- phys_type: interface # Physical interface type (interface or bond)
- vlan: 101 # VLAN tag to use with this NIC
- members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
- - eth2 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
- controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ - 192.168.38.199
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
phys_type: interface
+ # VLAN tag to use with this NIC
vlan: 101
+ # Physical NIC members of this mappingi
+ # Single value allowed for phys_type: interface
+ # Note: logical names like nic1 are not valid for fdio deployment yet.
members:
- - eth2
- external_overlay: # External network to be created in OpenStack by Services tenant
- name: private_cloud
- type: vlan
- segmentation_id: 101
- gateway: 192.168.38.1
- #
- storage: # Storage network configuration
+ - eth3
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
+ phys_type: interface
+ vlan: 101
+ members:
+ - eth3
+ # External network to be created in OpenStack by Services tenant
+ external_overlay:
+ name: private_cloud
+ type: vlan
+ segmentation_id: 101
+ gateway: 192.168.38.1
+
+ # Storage network configuration
+ storage:
enabled: true
- cidr: 12.0.0.0/24 # Subnet in CIDR format
- mtu: 1500 # Storage network MTU
- nic_mapping: # Mapping of network configuration for Overcloud Nodes
- compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
- phys_type: interface # Physical interface type (interface or bond)
- vlan: native # VLAN tag to use with this NIC
- members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
- - eth3 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
- controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ # Subnet in CIDR format
+ cidr: 12.0.0.0/24
+ # Storage network MTU
+ mtu: 1500
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
phys_type: interface
+ # VLAN tag to use with this NIC
vlan: native
+ # Physical NIC members of this mapping
+ # Single value allowed for phys_type: interface
members:
+ # Note logical names like nic1 not valid for fdio deployment yet.
- eth3
- #
- api: # API network configuration
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
+ phys_type: interface
+ vlan: native
+ members:
+ - eth3
+
+ api:
+ # API network configuration
enabled: false
- cidr: fd00:fd00:fd00:4000::/64 # Subnet in CIDR format
- vlan: 13 # VLAN tag to use for Overcloud hosts on this network
- mtu: 1500 # Api network MTU
- nic_mapping: # Mapping of network configuration for Overcloud Nodes
- compute: # Mapping for compute profile (nodes that will be used as Compute nodes)
- phys_type: interface # Physical interface type (interface or bond)
- vlan: native # VLAN tag to use with this NIC
- members: # Physical NIC members of this mapping (Single value allowed for interface phys_type)
- - eth4 # Note, for Apex you may also use the logical nic name (found by nic order), such as "nic1"
- controller: # Mapping for controller profile (nodes that will be used as Controller nodes)
+ # Subnet in CIDR format
+ cidr: fd00:fd00:fd00:4000::/64
+ # VLAN tag to use for Overcloud hosts on this network
+ vlan: 13
+ # Api network MTU
+ mtu: 1500
+ # Mapping of network configuration for Overcloud Nodes
+ nic_mapping:
+ # Mapping for compute profile (nodes assigned as Compute nodes)
+ compute:
+ # Physical interface type (interface or bond)
+ phys_type: interface
+ # VLAN tag to use with this NIC
+ vlan: native
+ # Physical NIC members of this mapping
+ # Single value allowed for phys_type: interface
+ # Note logical names like nic1 not valid for fdio deployment yet.
+ members:
+ - eth4
+ # Mapping for controller profile (nodes assigned as Controller nodes)
+ controller:
phys_type: interface
vlan: native
members:
@@ -213,8 +309,9 @@ networks: # Network configurations
apex:
networks:
admin:
+ # Range used for introspection phase (examining nodes).
+ # This cannot overlap with dhcp_range or overcloud_ip_range.
+ # for the overcloud default external network
introspection_range:
- 192.0.2.100
- - 192.0.2.120 # Range used for introspection phase (examining nodes). This cannot overlap with dhcp_range or overcloud_ip_range.
- # If the external network 'public' is disabled, then this range will be re-used to configure the floating ip range
- # for the overcloud default external network
+ - 192.0.2.120