# List of networks, used for j2 templating of enabled networks # # Supported values: # # name: Name of the network (mandatory) # name_lower: lowercase version of name used for filenames # (optional, defaults to name.lower()) # enabled: Is the network enabled (optional, defaults to true) # vlan: vlan for the network (optional) # vip: Enable creation of a virtual IP on this network # ip_subnet: IP/CIDR, e.g. '192.168.24.0/24' or '2001:db8:fd00:1000::/64' # (optional, may use parameter defaults instead) # allocation_pools: IP range list e.g. [{'start':'10.0.0.4', 'end':'10.0.0.250'}] # gateway_ip: gateway for the network (optional, may use parameter defaults) # ipv6_subnet: Optional, sets default IPv6 subnet if IPv4 is already defined. # ipv6_allocation_pools: Set default IPv6 allocation pools if IPv4 allocation pools # are already defined. # ipv6_gateway: Set an IPv6 gateway if IPv4 gateway already defined. # ipv6: If ip_subnet not defined, this specifies that the network is IPv6-only. # NOTE: IP-related values set parameter defaults in templates, may be overridden, # either by operators, or e.g in environments/network-isolation-v6.yaml where we # set some default IPv6 addresses. # compat_name: for existing stack you may need to override the default # transformation for the resource's name. # # Example: # - name Example # vip: false # ip_subnet: '10.0.2.0/24' # allocation_pools: [{'start': '10.0.2.4', 'end': '10.0.2.250'}] # gateway_ip: '10.0.2.254' # # To support backward compatility, two versions of the network definitions will # be created, network/.yaml and network/_v6.yaml. Only # one of these files may be used in the deployment at a time, since the # parameters used for configuration are the same in both files. In the # future, this behavior may be changed to create only one file for custom # networks. You may specify IPv6 addresses for ip_subnet, allocation_pools, # and gateway_ip if no IPv4 addresses are used for a custom network, or set # ipv6: true, and the network/.yaml file will be configured as IPv6. # # For configuring both IPv4 and IPv6 on the same interface, use two separate # networks, and then assign both IPs in the custom NIC configuration templates. - name: External vip: true name_lower: external ip_subnet: '10.0.0.0/24' allocation_pools: [{'start': '10.0.0.4', 'end': '10.0.0.250'}] gateway_ip: '10.0.0.1' ipv6_subnet: '2001:db8:fd00:1000::/64' ipv6_allocation_pools: [{'start': '2001:db8:fd00:1000::10', 'end': '2001:db8:fd00:1000:ffff:ffff:ffff:fffe'}] gateway_ipv6: '2001:db8:fd00:1000::1' - name: InternalApi name_lower: internal_api vip: true ip_subnet: '172.16.2.0/24' allocation_pools: [{'start': '172.16.2.4', 'end': '172.16.2.250'}] ipv6_subnet: 'fd00:fd00:fd00:2000::/64' ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:2000::10', 'end': 'fd00:fd00:fd00:2000:ffff:ffff:ffff:fffe'}] compat_name: Internal - name: Storage vip: true name_lower: storage ip_subnet: '172.16.1.0/24' allocation_pools: [{'start': '172.16.1.4', 'end': '172.16.1.250'}] ipv6_subnet: 'fd00:fd00:fd00:3000::/64' ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:3000::10', 'end': 'fd00:fd00:fd00:3000:ffff:ffff:ffff:fffe'}] - name: StorageMgmt name_lower: storage_mgmt vip: true ip_subnet: '172.16.3.0/24' allocation_pools: [{'start': '172.16.3.4', 'end': '172.16.3.250'}] ipv6_subnet: 'fd00:fd00:fd00:4000::/64' ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:4000::10', 'end': 'fd00:fd00:fd00:4000:ffff:ffff:ffff:fffe'}] - name: Tenant vip: false # Tenant network does not use VIPs name_lower: tenant ip_subnet: '172.16.0.0/24' allocation_pools: [{'start': '172.16.0.4', 'end': '172.16.0.250'}] ipv6_subnet: 'fd00:fd00:fd00:5000::/64' ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:5000::10', 'end': 'fd00:fd00:fd00:5000:ffff:ffff:ffff:fffe'}] - name: Management # Management network is enabled by default for backwards-compatibility, but # is not included in any roles by default. Add to role definitions to use. enabled: true vip: false # Management network does not use VIPs name_lower: management ip_subnet: '10.0.1.0/24' allocation_pools: [{'start': '10.0.1.4', 'end': '10.0.1.250'}] ipv6_subnet: 'fd00:fd00:fd00:6000::/64' ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:6000::10', 'end': 'fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe'}]