#This file is an example of an environment file for defining the isolated #networks and related parameters. resource_registry: # Network Interface templates to use (these files must exist) OS::TripleO::BlockStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/cinder-storage.yaml OS::TripleO::Compute::Net::SoftwareConfig: ../network/config/single-nic-vlans/compute.yaml OS::TripleO::Controller::Net::SoftwareConfig: ../network/config/single-nic-vlans/controller.yaml OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/swift-storage.yaml OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/ceph-storage.yaml parameter_defaults: # This section is where deployment-specific configuration is done # Customize the IP subnets to match the local environment InternalApiNetCidr: 172.17.0.0/24 StorageNetCidr: 172.18.0.0/24 StorageMgmtNetCidr: 172.19.0.0/24 TenantNetCidr: 172.16.0.0/24 ExternalNetCidr: 10.0.0.0/24 # CIDR subnet mask length for provisioning network ControlPlaneSubnetCidr: '24' # Customize the IP ranges on each network to use for static IPs and VIPs InternalApiAllocationPools: [{'start': '172.17.0.10', 'end': '172.17.0.200'}] StorageAllocationPools: [{'start': '172.18.0.10', 'end': '172.18.0.200'}] StorageMgmtAllocationPools: [{'start': '172.19.0.10', 'end': '172.19.0.200'}] TenantAllocationPools: [{'start': '172.16.0.10', 'end': '172.16.0.200'}] # Leave room if the external network is also used for floating IPs ExternalAllocationPools: [{'start': '10.0.0.10', 'end': '10.0.0.50'}] # Gateway router for the external network ExternalInterfaceDefaultRoute: 10.0.0.1 # Gateway router for the provisioning network (or Undercloud IP) ControlPlaneDefaultRoute: 192.0.2.254 # Generally the IP of the Undercloud EC2MetadataIp: 192.0.2.1 # Define the DNS servers (maximum 2) for the overcloud nodes DnsServers: ["8.8.8.8","8.8.4.4"] # Customize the VLAN IDs to match the local environment InternalApiNetworkVlanID: 10 StorageNetworkVlanID: 20 StorageMgmtNetworkVlanID: 30 TenantNetworkVlanID: 40 ExternalNetworkVlanID: 50 # Set to empty string to enable multiple external networks or VLANs NeutronExternalNetworkBridge: "''" # Customize bonding options, e.g. "mode=4 lacp_rate=1 updelay=1000 miimon=100" BondInterfaceOvsOptions: "bond_mode=active-backup"