#This file is an example of an environment file for defining the isolated #networks and related parameters. resource_registry: # Network Interface templates to use (these files must exist) OS::TripleO::BlockStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/cinder-storage.yaml OS::TripleO::Compute::Net::SoftwareConfig: ../network/config/single-nic-vlans/compute.yaml OS::TripleO::Controller::Net::SoftwareConfig: ../network/config/single-nic-vlans/controller.yaml OS::TripleO::ObjectStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/swift-storage.yaml OS::TripleO::CephStorage::Net::SoftwareConfig: ../network/config/single-nic-vlans/ceph-storage.yaml parameter_defaults: # This section is where deployment-specific configuration is done # CIDR subnet mask length for provisioning network ControlPlaneSubnetCidr: '24' # Gateway router for the provisioning network (or Undercloud IP) ControlPlaneDefaultRoute: 192.0.2.254 EC2MetadataIp: 192.0.2.1 # Generally the IP of the Undercloud # Customize the IP subnets to match the local environment InternalApiNetCidr: 172.17.0.0/24 StorageNetCidr: 172.18.0.0/24 StorageMgmtNetCidr: 172.19.0.0/24 TenantNetCidr: 172.16.0.0/24 ExternalNetCidr: 10.0.0.0/24 # Customize the VLAN IDs to match the local environment InternalApiNetworkVlanID: 20 StorageNetworkVlanID: 30 StorageMgmtNetworkVlanID: 40 TenantNetworkVlanID: 50 ExternalNetworkVlanID: 10 # Customize the IP ranges on each network to use for static IPs and VIPs InternalApiAllocationPools: [{'start': '172.17.0.10', 'end': '172.17.0.200'}] StorageAllocationPools: [{'start': '172.18.0.10', 'end': '172.18.0.200'}] StorageMgmtAllocationPools: [{'start': '172.19.0.10', 'end': '172.19.0.200'}] TenantAllocationPools: [{'start': '172.16.0.10', 'end': '172.16.0.200'}] # Leave room if the external network is also used for floating IPs ExternalAllocationPools: [{'start': '10.0.0.10', 'end': '10.0.0.50'}] # Gateway router for the external network ExternalInterfaceDefaultRoute: 10.0.0.1 # Uncomment if using the Management Network (see network-management.yaml) # ManagementNetCidr: 10.0.1.0/24 # ManagementAllocationPools: [{'start': '10.0.1.10', 'end': '10.0.1.50'}] # Use either this parameter or ControlPlaneDefaultRoute in the NIC templates # ManagementInterfaceDefaultRoute: 10.0.1.1 # Define the DNS servers (maximum 2) for the overcloud nodes DnsServers: ["8.8.8.8","8.8.4.4"] # List of Neutron network types for tenant networks (will be used in order) NeutronNetworkType: 'vxlan,vlan' # The tunnel type for the tenant network (vxlan or gre). Set to '' to disable tunneling. NeutronTunnelTypes: 'vxlan' # Neutron VLAN ranges per network, for example 'datacentre:1:499,tenant:500:1000': NeutronNetworkVLANRanges: 'datacentre:1:1000' # Customize bonding options, e.g. "mode=4 lacp_rate=1 updelay=1000 miimon=100" # for Linux bonds w/LACP, or "bond_mode=active-backup" for OVS active/backup. BondInterfaceOvsOptions: "bond_mode=active-backup"