From d88a8dc52ab4331a45a0cd92cf886274cccea73c Mon Sep 17 00:00:00 2001 From: Dan Sneddon Date: Wed, 30 Aug 2017 11:26:52 -0700 Subject: Remove ipv6 specific network templates This change renders the IPv6 versions of the isolated networks using j2. To allow for backward compatibility, there will be 2 versions of the network definitions, .yaml and _v6.yaml. If the ip_subnet contains an IPv6 address, or if ipv6: true is set on the network definition in network_data.yaml, then the .yaml version will contain an IPv6 definition, otherwise the .yaml will be IPv4, and the _v6.yaml will be IPv6. In a future follow-up patch, we will probably only create the required versions of the networks, either IPv4, IPv6, not both. The ipv6_subnet, ipv6_allocation_pools, and ipv6_gateway settings in the network_data.yaml definition file are used for the _v6.yaml network definition. Note that these subnet/cidr/gateway definitions only set the defaults, which can be overridden with parameters set in an environment file. Since the parameters for IP and subnet range are the same (e.g. InternalApiNetCidr applies to both IPv4/v6), only one version can be used at a time. If an operator wishes to use dual-stack IPv4/IPv6, then two different networks should be created, and both networks can be applied to a single interface. Note that the workflow for the operator is the same as before this change, but a new example template has been added to environments/network-environment-v6.yaml. Change-Id: I0e674e4b1e43786717ae6416571dde3a0e11a5cc Partially-Implements: blueprint composable-networks Closes-bug: 1714115 (cherry picked from commit dd299f08bd6b1df43760148d83ce9b6e09ba6572) --- network_data.yaml | 49 +++++++++++++++++++++++++++++++++++++------------ 1 file changed, 37 insertions(+), 12 deletions(-) (limited to 'network_data.yaml') diff --git a/network_data.yaml b/network_data.yaml index 6ad37dfe..fed11576 100644 --- a/network_data.yaml +++ b/network_data.yaml @@ -6,19 +6,22 @@ # name_lower: lowercase version of name used for filenames # (optional, defaults to name.lower()) # enabled: Is the network enabled (optional, defaults to true) -# ipv6: Does this network use IPv6 IPs? (optional, defaults to false) -# (optional, may use parameter defaults in environment to set) # vlan: vlan for the network (optional) # vip: Enable creation of a virtual IP on this network -# [TODO] (dsneddon@redhat.com) - Enable dynamic creation of VIP ports, -# to support VIPs on non-default networks. -# See https://bugs.launchpad.net/tripleo/+bug/1667104 -# ip_subnet: IP/CIDR, e.g. '192.168.24.0/24' (optional, may use parameter defaults) -# allocation_pools: IP range list e.g. [{'start':'10.0.0.4', 'end':'10.0.0.250}] +# ip_subnet: IP/CIDR, e.g. '192.168.24.0/24' or '2001:db8:fd00:1000::/64' +# (optional, may use parameter defaults instead) +# allocation_pools: IP range list e.g. [{'start':'10.0.0.4', 'end':'10.0.0.250'}] # gateway_ip: gateway for the network (optional, may use parameter defaults) -# NOTE: IP-related values set parameter defaults in templates, may be overridden. -# compat_name: for existing stack you may need to override the default transformation -# for the resource's name. +# ipv6_subnet: Optional, sets default IPv6 subnet if IPv4 is already defined. +# ipv6_allocation_pools: Set default IPv6 allocation pools if IPv4 allocation pools +# are already defined. +# ipv6_gateway: Set an IPv6 gateway if IPv4 gateway already defined. +# ipv6: If ip_subnet not defined, this specifies that the network is IPv6-only. +# NOTE: IP-related values set parameter defaults in templates, may be overridden, +# either by operators, or e.g in environments/network-isolation-v6.yaml where we +# set some default IPv6 addresses. +# compat_name: for existing stack you may need to override the default +# transformation for the resource's name. # # Example: # - name Example @@ -27,8 +30,17 @@ # allocation_pools: [{'start': '10.0.2.4', 'end': '10.0.2.250'}] # gateway_ip: '10.0.2.254' # -# TODO (dsneddon) remove existing templates from j2_excludes.yaml -# and generate all templates dynamically. +# To support backward compatility, two versions of the network definitions will +# be created, network/.yaml and network/_v6.yaml. Only +# one of these files may be used in the deployment at a time, since the +# parameters used for configuration are the same in both files. In the +# future, this behavior may be changed to create only one file for custom +# networks. You may specify IPv6 addresses for ip_subnet, allocation_pools, +# and gateway_ip if no IPv4 addresses are used for a custom network, or set +# ipv6: true, and the network/.yaml file will be configured as IPv6. +# +# For configuring both IPv4 and IPv6 on the same interface, use two separate +# networks, and then assign both IPs in the custom NIC configuration templates. - name: External vip: true @@ -36,27 +48,38 @@ ip_subnet: '10.0.0.0/24' allocation_pools: [{'start': '10.0.0.4', 'end': '10.0.0.250'}] gateway_ip: '10.0.0.1' + ipv6_subnet: '2001:db8:fd00:1000::/64' + ipv6_allocation_pools: [{'start': '2001:db8:fd00:1000::10', 'end': '2001:db8:fd00:1000:ffff:ffff:ffff:fffe'}] + gateway_ipv6: '2001:db8:fd00:1000::1' - name: InternalApi name_lower: internal_api vip: true ip_subnet: '172.16.2.0/24' allocation_pools: [{'start': '172.16.2.4', 'end': '172.16.2.250'}] + ipv6_subnet: 'fd00:fd00:fd00:2000::/64' + ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:2000::10', 'end': 'fd00:fd00:fd00:2000:ffff:ffff:ffff:fffe'}] compat_name: Internal - name: Storage vip: true name_lower: storage ip_subnet: '172.16.1.0/24' allocation_pools: [{'start': '172.16.1.4', 'end': '172.16.1.250'}] + ipv6_subnet: 'fd00:fd00:fd00:3000::/64' + ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:3000::10', 'end': 'fd00:fd00:fd00:3000:ffff:ffff:ffff:fffe'}] - name: StorageMgmt name_lower: storage_mgmt vip: true ip_subnet: '172.16.3.0/24' allocation_pools: [{'start': '172.16.3.4', 'end': '172.16.3.250'}] + ipv6_subnet: 'fd00:fd00:fd00:4000::/64' + ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:4000::10', 'end': 'fd00:fd00:fd00:4000:ffff:ffff:ffff:fffe'}] - name: Tenant vip: false # Tenant network does not use VIPs name_lower: tenant ip_subnet: '172.16.0.0/24' allocation_pools: [{'start': '172.16.0.4', 'end': '172.16.0.250'}] + ipv6_subnet: 'fd00:fd00:fd00:5000::/64' + ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:5000::10', 'end': 'fd00:fd00:fd00:5000:ffff:ffff:ffff:fffe'}] - name: Management # Management network is disabled by default enabled: false @@ -64,3 +87,5 @@ name_lower: management ip_subnet: '10.0.1.0/24' allocation_pools: [{'start': '10.0.1.4', 'end': '10.0.1.250'}] + ipv6_subnet: 'fd00:fd00:fd00:6000::/64' + ipv6_allocation_pools: [{'start': 'fd00:fd00:fd00:6000::10', 'end': 'fd00:fd00:fd00:6000:ffff:ffff:ffff:fffe'}] -- cgit 1.2.3-korg