From 5aabce1091cbb73887914d6900f06d5a5069d97c Mon Sep 17 00:00:00 2001 From: Dan Sneddon Date: Wed, 18 May 2016 16:05:18 -0700 Subject: Updates and fixes to NIC config template routes This change adds the ManagementInterfaceDefaultRoute parameter for setting the Management network as the default route in some deployments. Notes were added to indicate that if the Management network is used as the default gateway, then the default route on the control plane should be commented out. The sample network-environment.yaml was modified to include the ManagementInterfaceDefaultRoute, but this is commented out like the rest of the Management network parameters. This change also adds the ControlPlaneDefaultRoute and ExternalInterfaceDefaultRoute to all templates, so that if the networks are customized, the NIC configs can be modified without having to modify the parameters section of the template. The default for the ExternalInterfaceDefaultRoute is '10.0.0.1', and the default for ManagementInterfaceDefaultRoute is set to 'unset'. This change also converts the single-nic-linux-bridge-vlans from DHCP to static IPs on the Control Plane Interface, bringing these templates in line with the rest of the NIC config templates. The parameters needed to be updated in these templates as well. The controller-v6.yaml templates had a default value of "10.0.0.1" for the ExternalInterfaceDefaultRoute. This was confusing, and is now undefined. This change also sets a default gateway on the Control Plane in controller-no-external.yaml templates. Change-Id: I8ea6733fe46902e1baeff4ccfbcd42ecc5a1825f --- network/config/bond-with-vlans/compute.yaml | 22 ++++++++++++++++++++++ 1 file changed, 22 insertions(+) (limited to 'network/config/bond-with-vlans/compute.yaml') diff --git a/network/config/bond-with-vlans/compute.yaml b/network/config/bond-with-vlans/compute.yaml index 774bf02d..19c011eb 100644 --- a/network/config/bond-with-vlans/compute.yaml +++ b/network/config/bond-with-vlans/compute.yaml @@ -38,6 +38,10 @@ parameters: description: The ovs_options string for the bond interface. Set things like lacp=active and/or bond_mode=balance-slb using this option. type: string + ExternalNetworkVlanID: + default: 10 + description: Vlan ID for the external network traffic. + type: number InternalApiNetworkVlanID: default: 20 description: Vlan ID for the internal_api network traffic. @@ -46,6 +50,10 @@ parameters: default: 30 description: Vlan ID for the storage network traffic. type: number + StorageMgmtNetworkVlanID: + default: 40 + description: Vlan ID for the storage mgmt network traffic. + type: number TenantNetworkVlanID: default: 50 description: Vlan ID for the tenant network traffic. @@ -61,6 +69,14 @@ parameters: ControlPlaneDefaultRoute: # Override this via parameter_defaults description: The default route of the control plane network. type: string + ExternalInterfaceDefaultRoute: # Not used by default in this template + default: '10.0.0.1' + description: The default route of the external network. + type: string + ManagementInterfaceDefaultRoute: # Commented out by default in this template + default: unset + description: The default route of the management network. + type: string DnsServers: # Override this via parameter_defaults default: [] description: A list of DNS servers (2 max for some implementations) that will be added to resolv.conf. @@ -134,6 +150,8 @@ resources: - ip_netmask: {get_param: TenantIpSubnet} # Uncomment when including environments/network-management.yaml + # If setting default route on the Management interface, comment + # out the default route on the Control Plane. #- # type: vlan # device: bond1 @@ -141,6 +159,10 @@ resources: # addresses: # - # ip_netmask: {get_param: ManagementIpSubnet} + # routes: + # - + # default: true + # next_hop: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: -- cgit 1.2.3-korg