From 58349641541cc0e3b502311344d290c2afde7da5 Mon Sep 17 00:00:00 2001 From: Dan Prince Date: Wed, 8 Jul 2015 10:49:51 -0400 Subject: Support network isolation without external nets This patch adds extra heat environments that can be used to enable network isolation without using the external network. Instead of a separate external network the ctlplane will be used for all of the external/public traffic. Change-Id: Ia542cee02121771d7d57ac701b62d7608e8d1855 --- network/config/bond-with-vlans/README.md | 12 ++++++++++++ 1 file changed, 12 insertions(+) (limited to 'network/config/bond-with-vlans/README.md') diff --git a/network/config/bond-with-vlans/README.md b/network/config/bond-with-vlans/README.md index 1679df3c..98879b4f 100644 --- a/network/config/bond-with-vlans/README.md +++ b/network/config/bond-with-vlans/README.md @@ -1,6 +1,12 @@ This directory contains Heat templates to help configure Vlans on a bonded pair of NICs for each Overcloud role. +There are two versions of the controller role template, one with +an external network interface, and another without. If the +external network interface is not configured the ctlplane address +ranges will be used for external (public) network traffic. + + Configuration ------------- @@ -13,3 +19,9 @@ something like this: OS::TripleO::Controller::Net::SoftwareConfig: network/config/bond-with-vlans/controller.yaml OS::TripleO::ObjectStorage::Net::SoftwareConfig: network/config/bond-with-vlans/swift-storage.yaml OS::TripleO::CephStorage::Net::SoftwareConfig: network/config/bond-with-vlans/ceph-storage.yaml + +Configuration with no External Network +-------------------------------------- +Same as above except set the following value for the controller role: + + OS::TripleO::Controller::Net::SoftwareConfig: network/config/bond-with-vlans/controller-no-external.yaml -- cgit 1.2.3-korg