diff options
Diffstat (limited to 'environments')
26 files changed, 908 insertions, 14 deletions
diff --git a/environments/cinder-netapp-config.yaml b/environments/cinder-netapp-config.yaml index dfd15893..83ecbbe4 100644 --- a/environments/cinder-netapp-config.yaml +++ b/environments/cinder-netapp-config.yaml @@ -1,3 +1,7 @@ +# ************************************************************************************* +# DEPRECATED: Use tripleo-heat-templates/environments/storage/cinder-netapp-config.yaml +# instead. +# ************************************************************************************* # A Heat environment file which can be used to enable a # a Cinder NetApp backend, configured via puppet resource_registry: diff --git a/environments/docker-services-tls-everywhere.yaml b/environments/docker-services-tls-everywhere.yaml index 2740664c..3ca04697 100644 --- a/environments/docker-services-tls-everywhere.yaml +++ b/environments/docker-services-tls-everywhere.yaml @@ -35,13 +35,11 @@ resource_registry: OS::TripleO::PostDeploySteps: ../docker/post.yaml OS::TripleO::PostUpgradeSteps: ../docker/post-upgrade.yaml - OS::TripleO::Services: ../docker/services/services.yaml - parameter_defaults: - # Defaults to 'tripleoupstream'. Specify a local docker registry - # Example: 192.168.24.1:8787/tripleoupstream - DockerNamespace: tripleoupstream - DockerNamespaceIsRegistry: false + # To specify a local docker registry, enable these + # where 192.168.24.1 is the host running docker-distribution + #DockerNamespace: 192.168.24.1:8787/tripleoupstream + #DockerNamespaceIsRegistry: true ComputeServices: - OS::TripleO::Services::CACerts diff --git a/environments/docker.yaml b/environments/docker.yaml index 5de0c8d9..03713e83 100644 --- a/environments/docker.yaml +++ b/environments/docker.yaml @@ -2,10 +2,11 @@ resource_registry: # This can be used when you don't want to run puppet on the host, # e.g atomic, but it has been replaced with OS::TripleO::Services::Docker # OS::TripleO::NodeUserData: ../docker/firstboot/setup_docker_host.yaml - OS::TripleO::Services::Docker: ../puppet/services/docker.yaml # The compute node still needs extra initialization steps OS::TripleO::Compute::NodeUserData: ../docker/firstboot/setup_docker_host.yaml + OS::TripleO::Services::Docker: ../puppet/services/docker.yaml + #NOTE (dprince) add roles to be docker enabled as we support them OS::TripleO::Services::NovaLibvirt: ../docker/services/nova-libvirt.yaml OS::TripleO::Services::ComputeNeutronOvsAgent: ../docker/services/neutron-ovs-agent.yaml @@ -29,6 +30,7 @@ resource_registry: OS::TripleO::Services::NeutronDhcpAgent: ../docker/services/neutron-dhcp.yaml OS::TripleO::Services::NeutronL3Agent: ../docker/services/neutron-l3.yaml OS::TripleO::Services::MySQL: ../docker/services/database/mysql.yaml + OS::TripleO::Services::MySQLClient: ../docker/services/database/mysql-client.yaml OS::TripleO::Services::RabbitMQ: ../docker/services/rabbitmq.yaml OS::TripleO::Services::MongoDb: ../docker/services/database/mongodb.yaml OS::TripleO::Services::Redis: ../docker/services/database/redis.yaml @@ -51,16 +53,15 @@ resource_registry: OS::TripleO::Services::Horizon: ../docker/services/horizon.yaml OS::TripleO::Services::Iscsid: ../docker/services/iscsid.yaml OS::TripleO::Services::Multipathd: ../docker/services/multipathd.yaml - OS::TripleO::Services::CinderApi: ../docker/services/cinder-api.yaml - OS::TripleO::Services::CinderScheduler: ../docker/services/cinder-scheduler.yaml - OS::TripleO::Services::CinderBackup: ../docker/services/cinder-backup.yaml - OS::TripleO::Services::CinderVolume: ../docker/services/cinder-volume.yaml + # FIXME: Had to remove these to unblock containers CI. They should be put back when fixed. + # OS::TripleO::Services::CinderApi: ../docker/services/cinder-api.yaml + # OS::TripleO::Services::CinderScheduler: ../docker/services/cinder-scheduler.yaml + # OS::TripleO::Services::CinderBackup: ../docker/services/cinder-backup.yaml + # OS::TripleO::Services::CinderVolume: ../docker/services/cinder-volume.yaml OS::TripleO::PostDeploySteps: ../docker/post.yaml OS::TripleO::PostUpgradeSteps: ../docker/post-upgrade.yaml - OS::TripleO::Services: ../docker/services/services.yaml - parameter_defaults: # To specify a local docker registry, enable these # where 192.168.24.1 is the host running docker-distribution diff --git a/environments/enable-tls.yaml b/environments/enable-tls.yaml index 481459cb..175e1fd7 100644 --- a/environments/enable-tls.yaml +++ b/environments/enable-tls.yaml @@ -1,3 +1,6 @@ +# ******************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/enable-tls.yaml instead. +# ******************************************************************************** # Use this environment to pass in certificates for SSL deployments. # For these values to take effect, one of the tls-endpoints-*.yaml environments # must also be used. diff --git a/environments/inject-trust-anchor-hiera.yaml b/environments/inject-trust-anchor-hiera.yaml index b4908c1b..95d2de95 100644 --- a/environments/inject-trust-anchor-hiera.yaml +++ b/environments/inject-trust-anchor-hiera.yaml @@ -1,3 +1,7 @@ +# ************************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/inject-trust-anchor-hiera.yaml +# instead. +# ************************************************************************************** parameter_defaults: CAMap: first-ca-name: diff --git a/environments/inject-trust-anchor.yaml b/environments/inject-trust-anchor.yaml index 3ecb0d27..1b0f7066 100644 --- a/environments/inject-trust-anchor.yaml +++ b/environments/inject-trust-anchor.yaml @@ -1,3 +1,7 @@ +# ******************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/inject-trust-anchor.yaml +# instead. +# ******************************************************************************** parameter_defaults: SSLRootCertificate: | The contents of your root CA certificate go here diff --git a/environments/networking/neutron-midonet.yaml b/environments/networking/neutron-midonet.yaml new file mode 100644 index 00000000..ad8da8cf --- /dev/null +++ b/environments/networking/neutron-midonet.yaml @@ -0,0 +1,66 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable the Neutron MidoNet Services +# description: | +# A Heat environment that can be used to deploy MidoNet Services +parameter_defaults: + # Native Transport Port + # Type: string + CassandraClientPort: 9042 + + # The port for the Thrift RPC service, which is used for client connections + # Type: string + CassandraClientPortThrift: 9160 + + # The SSL port for encrypted communication. Unused unless enabled in encryption_options + # Type: string + CassandraSslStoragePort: 7001 + + # The Cassandra port for inter-node communication + # Type: string + CassandraStoragePort: 7000 + + # Name of the tunnel zone used to tunnel packages + # Type: string + TunnelZoneName: tunnelzone_tripleo + + # Type of the tunnels on the overlay. Choose between `gre` and `vxlan` + # Type: string + TunnelZoneType: vxlan + + # ****************************************************** + # Static parameters - these are values that must be + # included in the environment but should not be changed. + # ****************************************************** + # Whether enable Cassandra cluster on Controller + # Type: boolean + EnableCassandraOnController: True + + # Whether enable Zookeeper cluster on Controller + # Type: boolean + EnableZookeeperOnController: True + + # The core plugin for Neutron. The value should be the entrypoint to be loaded + # from neutron.core_plugins namespace. + # Type: string + NeutronCorePlugin: midonet.neutron.plugin_v1.MidonetPluginV2 + + # If True, DHCP provide metadata route to VM. + # Type: boolean + NeutronEnableIsolatedMetadata: True + + # ********************* + # End static parameters + # ********************* +resource_registry: + OS::TripleO::AllNodesExtraConfig: ../../puppet/extraconfig/all_nodes/neutron-midonet-all-nodes.yaml + OS::TripleO::Controller::Net::SoftwareConfig: ../../net-config-linux-bridge.yaml + OS::TripleO::Services::ComputeNeutronCorePlugin: ../../puppet/services/neutron-compute-plugin-midonet.yaml + OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None + OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginMidonet + OS::TripleO::Services::NeutronL3Agent: OS::Heat::None + OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None diff --git a/environments/neutron-midonet.yaml b/environments/neutron-midonet.yaml index c120d0b3..64cea2a6 100644 --- a/environments/neutron-midonet.yaml +++ b/environments/neutron-midonet.yaml @@ -1,3 +1,7 @@ +# ****************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/networking/neutron-midonet +# instead. +# ****************************************************************************** # A Heat environment that can be used to deploy MidoNet Services resource_registry: OS::TripleO::AllNodesExtraConfig: ../puppet/extraconfig/all_nodes/neutron-midonet-all-nodes.yaml diff --git a/environments/neutron-ml2-ovn-ha.yaml b/environments/neutron-ml2-ovn-ha.yaml new file mode 100644 index 00000000..c592d576 --- /dev/null +++ b/environments/neutron-ml2-ovn-ha.yaml @@ -0,0 +1,24 @@ +# A Heat environment file which can be used to enable OVN +# extensions, configured via puppet +resource_registry: + OS::TripleO::Services::NeutronCorePlugin: OS::TripleO::Services::NeutronCorePluginML2OVN + OS::TripleO::Services::ComputeNeutronCorePlugin: ../puppet/services/neutron-compute-plugin-ovn.yaml + OS::TripleO::Services::OVNDBs: ../puppet/services/pacemaker/ovn-dbs.yaml +# Disabling Neutron services that overlap with OVN + OS::TripleO::Services::NeutronL3Agent: OS::Heat::None + OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None + OS::TripleO::Services::NeutronMetadataAgent: OS::Heat::None + OS::TripleO::Services::NeutronDhcpAgent: OS::Heat::None + OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None + +parameter_defaults: + NeutronMechanismDrivers: ovn + OVNVifType: ovs + OVNNeutronSyncMode: log + OVNQosDriver: ovn-qos + OVNTunnelEncapType: geneve + NeutronEnableDHCPAgent: false + NeutronTypeDrivers: 'geneve,vxlan,vlan,flat' + NeutronNetworkType: 'geneve' + NeutronServicePlugins: 'qos,ovn-router' + NeutronVniRanges: ['1:65536', ] diff --git a/environments/puppet-ceph-external.yaml b/environments/puppet-ceph-external.yaml index 5f8b02ad..2f577c26 100644 --- a/environments/puppet-ceph-external.yaml +++ b/environments/puppet-ceph-external.yaml @@ -1,3 +1,7 @@ +# ****************************************************************************** +# DEPRECATED: Use tripleo-heat-templates/environments/storage/ceph-external.yaml +# instead. +# ****************************************************************************** # A Heat environment file which can be used to enable the # use of an externally managed Ceph cluster. resource_registry: diff --git a/environments/services-docker/ec2-api.yaml b/environments/services-docker/ec2-api.yaml new file mode 100644 index 00000000..24cbb032 --- /dev/null +++ b/environments/services-docker/ec2-api.yaml @@ -0,0 +1,2 @@ +resource_registry: + OS::TripleO::Services::Ec2Api: ../../docker/services/ec2-api.yaml diff --git a/environments/services/ironic.yaml b/environments/services/ironic.yaml index b1317382..b81b0269 100644 --- a/environments/services/ironic.yaml +++ b/environments/services/ironic.yaml @@ -1,5 +1,6 @@ resource_registry: OS::TripleO::Services::IronicApi: ../../puppet/services/ironic-api.yaml OS::TripleO::Services::IronicConductor: ../../puppet/services/ironic-conductor.yaml - OS::TripleO::Services::IronicPxe: ../../puppet/services/ironic-pxe.yaml OS::TripleO::Services::NovaIronic: ../../puppet/services/nova-ironic.yaml +parameter_defaults: + NovaSchedulerDiscoverHostsInCellsInterval: 15 diff --git a/environments/ssl/enable-tls.yaml b/environments/ssl/enable-tls.yaml new file mode 100644 index 00000000..c8ed2bd2 --- /dev/null +++ b/environments/ssl/enable-tls.yaml @@ -0,0 +1,41 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable SSL on OpenStack Public Endpoints +# description: | +# Use this environment to pass in certificates for SSL deployments. +# For these values to take effect, one of the tls-endpoints-*.yaml environments +# must also be used. +parameter_defaults: + # The content of the SSL certificate (without Key) in PEM format. + # Mandatory. This parameter must be set by the user. + # Type: string + SSLCertificate: | + The contents of your certificate go here + + # The content of an SSL intermediate CA certificate in PEM format. + # Type: string + SSLIntermediateCertificate: '' + + # The content of the SSL Key in PEM format. + # Mandatory. This parameter must be set by the user. + # Type: string + SSLKey: | + The contents of the private key go here + + # ****************************************************** + # Static parameters - these are values that must be + # included in the environment but should not be changed. + # ****************************************************** + # The filepath of the certificate as it will be stored in the controller. + # Type: string + DeployedSSLCertificatePath: /etc/pki/tls/private/overcloud_endpoint.pem + + # ********************* + # End static parameters + # ********************* +resource_registry: + OS::TripleO::NodeTLSData: ../../puppet/extraconfig/tls/tls-cert-inject.yaml diff --git a/environments/ssl/inject-trust-anchor-hiera.yaml b/environments/ssl/inject-trust-anchor-hiera.yaml new file mode 100644 index 00000000..db3f2677 --- /dev/null +++ b/environments/ssl/inject-trust-anchor-hiera.yaml @@ -0,0 +1,22 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Inject SSL Trust Anchor on Overcloud Nodes +# description: | +# When using an SSL certificate signed by a CA that is not in the default +# list of CAs, this environment allows adding a custom CA certificate to +# the overcloud nodes. +parameter_defaults: + # Map containing the CA certs and information needed for deploying them. + # Type: json + CAMap: + first-ca-name: + content: | + The content of the CA cert goes here + second-ca-name: + content: | + The content of the CA cert goes here + diff --git a/environments/ssl/inject-trust-anchor.yaml b/environments/ssl/inject-trust-anchor.yaml new file mode 100644 index 00000000..521a4191 --- /dev/null +++ b/environments/ssl/inject-trust-anchor.yaml @@ -0,0 +1,20 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Inject SSL Trust Anchor on Overcloud Nodes +# description: | +# When using an SSL certificate signed by a CA that is not in the default +# list of CAs, this environment allows adding a custom CA certificate to +# the overcloud nodes. +parameter_defaults: + # The content of a CA's SSL certificate file in PEM format. This is evaluated on the client side. + # Mandatory. This parameter must be set by the user. + # Type: string + SSLRootCertificate: | + The contents of your certificate go here + +resource_registry: + OS::TripleO::NodeTLSCAData: ../../puppet/extraconfig/tls/ca-inject.yaml diff --git a/environments/ssl/tls-endpoints-public-dns.yaml b/environments/ssl/tls-endpoints-public-dns.yaml new file mode 100644 index 00000000..216afece --- /dev/null +++ b/environments/ssl/tls-endpoints-public-dns.yaml @@ -0,0 +1,131 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Deploy Public SSL Endpoints as DNS Names +# description: | +# Use this environment when deploying an SSL-enabled overcloud where the public +# endpoint is a DNS name. +parameter_defaults: + # Mapping of service endpoint -> protocol. Typically set via parameter_defaults in the resource registry. + # Type: json + EndpointMap: + AodhAdmin: {protocol: 'http', port: '8042', host: 'IP_ADDRESS'} + AodhInternal: {protocol: 'http', port: '8042', host: 'IP_ADDRESS'} + AodhPublic: {protocol: 'https', port: '13042', host: 'CLOUDNAME'} + BarbicanAdmin: {protocol: 'http', port: '9311', host: 'IP_ADDRESS'} + BarbicanInternal: {protocol: 'http', port: '9311', host: 'IP_ADDRESS'} + BarbicanPublic: {protocol: 'https', port: '13311', host: 'CLOUDNAME'} + CeilometerAdmin: {protocol: 'http', port: '8777', host: 'IP_ADDRESS'} + CeilometerInternal: {protocol: 'http', port: '8777', host: 'IP_ADDRESS'} + CeilometerPublic: {protocol: 'https', port: '13777', host: 'CLOUDNAME'} + CephRgwAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + CephRgwInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + CephRgwPublic: {protocol: 'https', port: '13808', host: 'CLOUDNAME'} + CinderAdmin: {protocol: 'http', port: '8776', host: 'IP_ADDRESS'} + CinderInternal: {protocol: 'http', port: '8776', host: 'IP_ADDRESS'} + CinderPublic: {protocol: 'https', port: '13776', host: 'CLOUDNAME'} + CongressAdmin: {protocol: 'http', port: '1789', host: 'IP_ADDRESS'} + CongressInternal: {protocol: 'http', port: '1789', host: 'IP_ADDRESS'} + CongressPublic: {protocol: 'https', port: '13789', host: 'CLOUDNAME'} + ContrailAnalyticsApiAdmin: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiInternal: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiPublic: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpAdmin: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpInternal: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpPublic: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshAdmin: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshInternal: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshPublic: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsHttpAdmin: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpInternal: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpPublic: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisAdmin: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisInternal: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisPublic: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailConfigAdmin: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigInternal: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigPublic: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailDiscoveryAdmin: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryInternal: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryPublic: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailWebuiHttpAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpPublic: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpsAdmin: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsInternal: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsPublic: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + Ec2ApiAdmin: {protocol: 'http', port: '8788', host: 'IP_ADDRESS'} + Ec2ApiInternal: {protocol: 'http', port: '8788', host: 'IP_ADDRESS'} + Ec2ApiPublic: {protocol: 'https', port: '13788', host: 'CLOUDNAME'} + GlanceAdmin: {protocol: 'http', port: '9292', host: 'IP_ADDRESS'} + GlanceInternal: {protocol: 'http', port: '9292', host: 'IP_ADDRESS'} + GlancePublic: {protocol: 'https', port: '13292', host: 'CLOUDNAME'} + GnocchiAdmin: {protocol: 'http', port: '8041', host: 'IP_ADDRESS'} + GnocchiInternal: {protocol: 'http', port: '8041', host: 'IP_ADDRESS'} + GnocchiPublic: {protocol: 'https', port: '13041', host: 'CLOUDNAME'} + HeatAdmin: {protocol: 'http', port: '8004', host: 'IP_ADDRESS'} + HeatInternal: {protocol: 'http', port: '8004', host: 'IP_ADDRESS'} + HeatPublic: {protocol: 'https', port: '13004', host: 'CLOUDNAME'} + HeatCfnAdmin: {protocol: 'http', port: '8000', host: 'IP_ADDRESS'} + HeatCfnInternal: {protocol: 'http', port: '8000', host: 'IP_ADDRESS'} + HeatCfnPublic: {protocol: 'https', port: '13005', host: 'CLOUDNAME'} + HorizonPublic: {protocol: 'https', port: '443', host: 'CLOUDNAME'} + IronicAdmin: {protocol: 'http', port: '6385', host: 'IP_ADDRESS'} + IronicInternal: {protocol: 'http', port: '6385', host: 'IP_ADDRESS'} + IronicPublic: {protocol: 'https', port: '13385', host: 'CLOUDNAME'} + IronicInspectorAdmin: {protocol: 'http', port: '5050', host: 'IP_ADDRESS'} + IronicInspectorInternal: {protocol: 'http', port: '5050', host: 'IP_ADDRESS'} + IronicInspectorPublic: {protocol: 'https', port: '13050', host: 'CLOUDNAME'} + KeystoneAdmin: {protocol: 'http', port: '35357', host: 'IP_ADDRESS'} + KeystoneInternal: {protocol: 'http', port: '5000', host: 'IP_ADDRESS'} + KeystonePublic: {protocol: 'https', port: '13000', host: 'CLOUDNAME'} + ManilaAdmin: {protocol: 'http', port: '8786', host: 'IP_ADDRESS'} + ManilaInternal: {protocol: 'http', port: '8786', host: 'IP_ADDRESS'} + ManilaPublic: {protocol: 'https', port: '13786', host: 'CLOUDNAME'} + MistralAdmin: {protocol: 'http', port: '8989', host: 'IP_ADDRESS'} + MistralInternal: {protocol: 'http', port: '8989', host: 'IP_ADDRESS'} + MistralPublic: {protocol: 'https', port: '13989', host: 'CLOUDNAME'} + MysqlInternal: {protocol: 'mysql+pymysql', port: '3306', host: 'IP_ADDRESS'} + NeutronAdmin: {protocol: 'http', port: '9696', host: 'IP_ADDRESS'} + NeutronInternal: {protocol: 'http', port: '9696', host: 'IP_ADDRESS'} + NeutronPublic: {protocol: 'https', port: '13696', host: 'CLOUDNAME'} + NovaAdmin: {protocol: 'http', port: '8774', host: 'IP_ADDRESS'} + NovaInternal: {protocol: 'http', port: '8774', host: 'IP_ADDRESS'} + NovaPublic: {protocol: 'https', port: '13774', host: 'CLOUDNAME'} + NovaPlacementAdmin: {protocol: 'http', port: '8778', host: 'IP_ADDRESS'} + NovaPlacementInternal: {protocol: 'http', port: '8778', host: 'IP_ADDRESS'} + NovaPlacementPublic: {protocol: 'https', port: '13778', host: 'CLOUDNAME'} + NovaVNCProxyAdmin: {protocol: 'http', port: '6080', host: 'IP_ADDRESS'} + NovaVNCProxyInternal: {protocol: 'http', port: '6080', host: 'IP_ADDRESS'} + NovaVNCProxyPublic: {protocol: 'https', port: '13080', host: 'CLOUDNAME'} + OctaviaAdmin: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} + OctaviaInternal: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} + OctaviaPublic: {protocol: 'https', port: '13876', host: 'CLOUDNAME'} + PankoAdmin: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} + PankoInternal: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} + PankoPublic: {protocol: 'https', port: '13779', host: 'CLOUDNAME'} + SaharaAdmin: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaInternal: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaPublic: {protocol: 'https', port: '13386', host: 'CLOUDNAME'} + SwiftAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + SwiftInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + SwiftPublic: {protocol: 'https', port: '13808', host: 'CLOUDNAME'} + TackerAdmin: {protocol: 'http', port: '9890', host: 'IP_ADDRESS'} + TackerInternal: {protocol: 'http', port: '9890', host: 'IP_ADDRESS'} + TackerPublic: {protocol: 'https', port: '13989', host: 'CLOUDNAME'} + ZaqarAdmin: {protocol: 'http', port: '8888', host: 'IP_ADDRESS'} + ZaqarInternal: {protocol: 'http', port: '8888', host: 'IP_ADDRESS'} + ZaqarPublic: {protocol: 'https', port: '13888', host: 'CLOUDNAME'} + ZaqarWebSocketAdmin: {protocol: 'ws', port: '9000', host: 'IP_ADDRESS'} + ZaqarWebSocketInternal: {protocol: 'ws', port: '9000', host: 'IP_ADDRESS'} + ZaqarWebSocketPublic: {protocol: 'wss', port: '9000', host: 'CLOUDNAME'} + diff --git a/environments/ssl/tls-endpoints-public-ip.yaml b/environments/ssl/tls-endpoints-public-ip.yaml new file mode 100644 index 00000000..d216ab7f --- /dev/null +++ b/environments/ssl/tls-endpoints-public-ip.yaml @@ -0,0 +1,131 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Deploy Public SSL Endpoints as IP Addresses +# description: | +# Use this environment when deploying an SSL-enabled overcloud where the public +# endpoint is an IP address. +parameter_defaults: + # Mapping of service endpoint -> protocol. Typically set via parameter_defaults in the resource registry. + # Type: json + EndpointMap: + AodhAdmin: {protocol: 'http', port: '8042', host: 'IP_ADDRESS'} + AodhInternal: {protocol: 'http', port: '8042', host: 'IP_ADDRESS'} + AodhPublic: {protocol: 'https', port: '13042', host: 'IP_ADDRESS'} + BarbicanAdmin: {protocol: 'http', port: '9311', host: 'IP_ADDRESS'} + BarbicanInternal: {protocol: 'http', port: '9311', host: 'IP_ADDRESS'} + BarbicanPublic: {protocol: 'https', port: '13311', host: 'IP_ADDRESS'} + CeilometerAdmin: {protocol: 'http', port: '8777', host: 'IP_ADDRESS'} + CeilometerInternal: {protocol: 'http', port: '8777', host: 'IP_ADDRESS'} + CeilometerPublic: {protocol: 'https', port: '13777', host: 'IP_ADDRESS'} + CephRgwAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + CephRgwInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + CephRgwPublic: {protocol: 'https', port: '13808', host: 'IP_ADDRESS'} + CinderAdmin: {protocol: 'http', port: '8776', host: 'IP_ADDRESS'} + CinderInternal: {protocol: 'http', port: '8776', host: 'IP_ADDRESS'} + CinderPublic: {protocol: 'https', port: '13776', host: 'IP_ADDRESS'} + CongressAdmin: {protocol: 'http', port: '1789', host: 'IP_ADDRESS'} + CongressInternal: {protocol: 'http', port: '1789', host: 'IP_ADDRESS'} + CongressPublic: {protocol: 'https', port: '13789', host: 'IP_ADDRESS'} + ContrailAnalyticsApiAdmin: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiInternal: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiPublic: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpAdmin: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpInternal: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpPublic: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshAdmin: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshInternal: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshPublic: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsHttpAdmin: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpInternal: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpPublic: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisAdmin: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisInternal: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisPublic: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailConfigAdmin: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigInternal: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigPublic: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailDiscoveryAdmin: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryInternal: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryPublic: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailWebuiHttpAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpPublic: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpsAdmin: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsInternal: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsPublic: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + Ec2ApiAdmin: {protocol: 'http', port: '8788', host: 'IP_ADDRESS'} + Ec2ApiInternal: {protocol: 'http', port: '8788', host: 'IP_ADDRESS'} + Ec2ApiPublic: {protocol: 'https', port: '13788', host: 'IP_ADDRESS'} + GlanceAdmin: {protocol: 'http', port: '9292', host: 'IP_ADDRESS'} + GlanceInternal: {protocol: 'http', port: '9292', host: 'IP_ADDRESS'} + GlancePublic: {protocol: 'https', port: '13292', host: 'IP_ADDRESS'} + GnocchiAdmin: {protocol: 'http', port: '8041', host: 'IP_ADDRESS'} + GnocchiInternal: {protocol: 'http', port: '8041', host: 'IP_ADDRESS'} + GnocchiPublic: {protocol: 'https', port: '13041', host: 'IP_ADDRESS'} + HeatAdmin: {protocol: 'http', port: '8004', host: 'IP_ADDRESS'} + HeatInternal: {protocol: 'http', port: '8004', host: 'IP_ADDRESS'} + HeatPublic: {protocol: 'https', port: '13004', host: 'IP_ADDRESS'} + HeatCfnAdmin: {protocol: 'http', port: '8000', host: 'IP_ADDRESS'} + HeatCfnInternal: {protocol: 'http', port: '8000', host: 'IP_ADDRESS'} + HeatCfnPublic: {protocol: 'https', port: '13005', host: 'IP_ADDRESS'} + HorizonPublic: {protocol: 'https', port: '443', host: 'IP_ADDRESS'} + IronicAdmin: {protocol: 'http', port: '6385', host: 'IP_ADDRESS'} + IronicInternal: {protocol: 'http', port: '6385', host: 'IP_ADDRESS'} + IronicPublic: {protocol: 'https', port: '13385', host: 'IP_ADDRESS'} + IronicInspectorAdmin: {protocol: 'http', port: '5050', host: 'IP_ADDRESS'} + IronicInspectorInternal: {protocol: 'http', port: '5050', host: 'IP_ADDRESS'} + IronicInspectorPublic: {protocol: 'https', port: '13050', host: 'IP_ADDRESS'} + KeystoneAdmin: {protocol: 'http', port: '35357', host: 'IP_ADDRESS'} + KeystoneInternal: {protocol: 'http', port: '5000', host: 'IP_ADDRESS'} + KeystonePublic: {protocol: 'https', port: '13000', host: 'IP_ADDRESS'} + ManilaAdmin: {protocol: 'http', port: '8786', host: 'IP_ADDRESS'} + ManilaInternal: {protocol: 'http', port: '8786', host: 'IP_ADDRESS'} + ManilaPublic: {protocol: 'https', port: '13786', host: 'IP_ADDRESS'} + MistralAdmin: {protocol: 'http', port: '8989', host: 'IP_ADDRESS'} + MistralInternal: {protocol: 'http', port: '8989', host: 'IP_ADDRESS'} + MistralPublic: {protocol: 'https', port: '13989', host: 'IP_ADDRESS'} + MysqlInternal: {protocol: 'mysql+pymysql', port: '3306', host: 'IP_ADDRESS'} + NeutronAdmin: {protocol: 'http', port: '9696', host: 'IP_ADDRESS'} + NeutronInternal: {protocol: 'http', port: '9696', host: 'IP_ADDRESS'} + NeutronPublic: {protocol: 'https', port: '13696', host: 'IP_ADDRESS'} + NovaAdmin: {protocol: 'http', port: '8774', host: 'IP_ADDRESS'} + NovaInternal: {protocol: 'http', port: '8774', host: 'IP_ADDRESS'} + NovaPublic: {protocol: 'https', port: '13774', host: 'IP_ADDRESS'} + NovaPlacementAdmin: {protocol: 'http', port: '8778', host: 'IP_ADDRESS'} + NovaPlacementInternal: {protocol: 'http', port: '8778', host: 'IP_ADDRESS'} + NovaPlacementPublic: {protocol: 'https', port: '13778', host: 'IP_ADDRESS'} + NovaVNCProxyAdmin: {protocol: 'http', port: '6080', host: 'IP_ADDRESS'} + NovaVNCProxyInternal: {protocol: 'http', port: '6080', host: 'IP_ADDRESS'} + NovaVNCProxyPublic: {protocol: 'https', port: '13080', host: 'IP_ADDRESS'} + OctaviaAdmin: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} + OctaviaInternal: {protocol: 'http', port: '9876', host: 'IP_ADDRESS'} + OctaviaPublic: {protocol: 'https', port: '13876', host: 'IP_ADDRESS'} + PankoAdmin: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} + PankoInternal: {protocol: 'http', port: '8779', host: 'IP_ADDRESS'} + PankoPublic: {protocol: 'https', port: '13779', host: 'IP_ADDRESS'} + SaharaAdmin: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaInternal: {protocol: 'http', port: '8386', host: 'IP_ADDRESS'} + SaharaPublic: {protocol: 'https', port: '13386', host: 'IP_ADDRESS'} + SwiftAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + SwiftInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + SwiftPublic: {protocol: 'https', port: '13808', host: 'IP_ADDRESS'} + TackerAdmin: {protocol: 'http', port: '9890', host: 'IP_ADDRESS'} + TackerInternal: {protocol: 'http', port: '9890', host: 'IP_ADDRESS'} + TackerPublic: {protocol: 'https', port: '13989', host: 'IP_ADDRESS'} + ZaqarAdmin: {protocol: 'http', port: '8888', host: 'IP_ADDRESS'} + ZaqarInternal: {protocol: 'http', port: '8888', host: 'IP_ADDRESS'} + ZaqarPublic: {protocol: 'https', port: '13888', host: 'IP_ADDRESS'} + ZaqarWebSocketAdmin: {protocol: 'ws', port: '9000', host: 'IP_ADDRESS'} + ZaqarWebSocketInternal: {protocol: 'ws', port: '9000', host: 'IP_ADDRESS'} + ZaqarWebSocketPublic: {protocol: 'wss', port: '9000', host: 'IP_ADDRESS'} + diff --git a/environments/ssl/tls-everywhere-endpoints-dns.yaml b/environments/ssl/tls-everywhere-endpoints-dns.yaml new file mode 100644 index 00000000..63157ddd --- /dev/null +++ b/environments/ssl/tls-everywhere-endpoints-dns.yaml @@ -0,0 +1,131 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Deploy All SSL Endpoints as DNS Names +# description: | +# Use this environment when deploying an overcloud where all the endpoints are +# DNS names and there's TLS in all endpoint types. +parameter_defaults: + # Mapping of service endpoint -> protocol. Typically set via parameter_defaults in the resource registry. + # Type: json + EndpointMap: + AodhAdmin: {protocol: 'https', port: '8042', host: 'CLOUDNAME'} + AodhInternal: {protocol: 'https', port: '8042', host: 'CLOUDNAME'} + AodhPublic: {protocol: 'https', port: '13042', host: 'CLOUDNAME'} + BarbicanAdmin: {protocol: 'https', port: '9311', host: 'CLOUDNAME'} + BarbicanInternal: {protocol: 'https', port: '9311', host: 'CLOUDNAME'} + BarbicanPublic: {protocol: 'https', port: '13311', host: 'CLOUDNAME'} + CeilometerAdmin: {protocol: 'https', port: '8777', host: 'CLOUDNAME'} + CeilometerInternal: {protocol: 'https', port: '8777', host: 'CLOUDNAME'} + CeilometerPublic: {protocol: 'https', port: '13777', host: 'CLOUDNAME'} + CephRgwAdmin: {protocol: 'https', port: '8080', host: 'CLOUDNAME'} + CephRgwInternal: {protocol: 'https', port: '8080', host: 'CLOUDNAME'} + CephRgwPublic: {protocol: 'https', port: '13808', host: 'CLOUDNAME'} + CinderAdmin: {protocol: 'https', port: '8776', host: 'CLOUDNAME'} + CinderInternal: {protocol: 'https', port: '8776', host: 'CLOUDNAME'} + CinderPublic: {protocol: 'https', port: '13776', host: 'CLOUDNAME'} + CongressAdmin: {protocol: 'https', port: '1789', host: 'CLOUDNAME'} + CongressInternal: {protocol: 'https', port: '1789', host: 'CLOUDNAME'} + CongressPublic: {protocol: 'https', port: '13789', host: 'CLOUDNAME'} + ContrailAnalyticsApiAdmin: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiInternal: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsApiPublic: {protocol: 'http', port: '8081', host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpAdmin: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpInternal: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorHttpPublic: {protocol: 'http', port: '8089', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshAdmin: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshInternal: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsCollectorSandeshPublic: {protocol: 'http', port: '8086', + host: 'IP_ADDRESS'} + ContrailAnalyticsHttpAdmin: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpInternal: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsHttpPublic: {protocol: 'http', port: '8090', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisAdmin: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisInternal: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailAnalyticsRedisPublic: {protocol: 'http', port: '6379', host: 'IP_ADDRESS'} + ContrailConfigAdmin: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigInternal: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailConfigPublic: {protocol: 'http', port: '8082', host: 'IP_ADDRESS'} + ContrailDiscoveryAdmin: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryInternal: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailDiscoveryPublic: {protocol: 'http', port: '5998', host: 'IP_ADDRESS'} + ContrailWebuiHttpAdmin: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpInternal: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpPublic: {protocol: 'http', port: '8080', host: 'IP_ADDRESS'} + ContrailWebuiHttpsAdmin: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsInternal: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + ContrailWebuiHttpsPublic: {protocol: 'http', port: '8143', host: 'IP_ADDRESS'} + Ec2ApiAdmin: {protocol: 'https', port: '8788', host: 'CLOUDNAME'} + Ec2ApiInternal: {protocol: 'https', port: '8788', host: 'CLOUDNAME'} + Ec2ApiPublic: {protocol: 'https', port: '13788', host: 'CLOUDNAME'} + GlanceAdmin: {protocol: 'https', port: '9292', host: 'CLOUDNAME'} + GlanceInternal: {protocol: 'https', port: '9292', host: 'CLOUDNAME'} + GlancePublic: {protocol: 'https', port: '13292', host: 'CLOUDNAME'} + GnocchiAdmin: {protocol: 'https', port: '8041', host: 'CLOUDNAME'} + GnocchiInternal: {protocol: 'https', port: '8041', host: 'CLOUDNAME'} + GnocchiPublic: {protocol: 'https', port: '13041', host: 'CLOUDNAME'} + HeatAdmin: {protocol: 'https', port: '8004', host: 'CLOUDNAME'} + HeatInternal: {protocol: 'https', port: '8004', host: 'CLOUDNAME'} + HeatPublic: {protocol: 'https', port: '13004', host: 'CLOUDNAME'} + HeatCfnAdmin: {protocol: 'https', port: '8000', host: 'CLOUDNAME'} + HeatCfnInternal: {protocol: 'https', port: '8000', host: 'CLOUDNAME'} + HeatCfnPublic: {protocol: 'https', port: '13005', host: 'CLOUDNAME'} + HorizonPublic: {protocol: 'https', port: '443', host: 'CLOUDNAME'} + IronicAdmin: {protocol: 'https', port: '6385', host: 'CLOUDNAME'} + IronicInternal: {protocol: 'https', port: '6385', host: 'CLOUDNAME'} + IronicPublic: {protocol: 'https', port: '13385', host: 'CLOUDNAME'} + IronicInspectorAdmin: {protocol: 'http', port: '5050', host: 'CLOUDNAME'} + IronicInspectorInternal: {protocol: 'http', port: '5050', host: 'CLOUDNAME'} + IronicInspectorPublic: {protocol: 'https', port: '13050', host: 'CLOUDNAME'} + KeystoneAdmin: {protocol: 'https', port: '35357', host: 'CLOUDNAME'} + KeystoneInternal: {protocol: 'https', port: '5000', host: 'CLOUDNAME'} + KeystonePublic: {protocol: 'https', port: '13000', host: 'CLOUDNAME'} + ManilaAdmin: {protocol: 'https', port: '8786', host: 'CLOUDNAME'} + ManilaInternal: {protocol: 'https', port: '8786', host: 'CLOUDNAME'} + ManilaPublic: {protocol: 'https', port: '13786', host: 'CLOUDNAME'} + MistralAdmin: {protocol: 'https', port: '8989', host: 'CLOUDNAME'} + MistralInternal: {protocol: 'https', port: '8989', host: 'CLOUDNAME'} + MistralPublic: {protocol: 'https', port: '13989', host: 'CLOUDNAME'} + MysqlInternal: {protocol: 'mysql+pymysql', port: '3306', host: 'CLOUDNAME'} + NeutronAdmin: {protocol: 'https', port: '9696', host: 'CLOUDNAME'} + NeutronInternal: {protocol: 'https', port: '9696', host: 'CLOUDNAME'} + NeutronPublic: {protocol: 'https', port: '13696', host: 'CLOUDNAME'} + NovaAdmin: {protocol: 'https', port: '8774', host: 'CLOUDNAME'} + NovaInternal: {protocol: 'https', port: '8774', host: 'CLOUDNAME'} + NovaPublic: {protocol: 'https', port: '13774', host: 'CLOUDNAME'} + NovaPlacementAdmin: {protocol: 'https', port: '8778', host: 'CLOUDNAME'} + NovaPlacementInternal: {protocol: 'https', port: '8778', host: 'CLOUDNAME'} + NovaPlacementPublic: {protocol: 'https', port: '13778', host: 'CLOUDNAME'} + NovaVNCProxyAdmin: {protocol: 'https', port: '6080', host: 'CLOUDNAME'} + NovaVNCProxyInternal: {protocol: 'https', port: '6080', host: 'CLOUDNAME'} + NovaVNCProxyPublic: {protocol: 'https', port: '13080', host: 'CLOUDNAME'} + OctaviaAdmin: {protocol: 'https', port: '9876', host: 'IP_ADDRESS'} + OctaviaInternal: {protocol: 'https', port: '9876', host: 'IP_ADDRESS'} + OctaviaPublic: {protocol: 'https', port: '13876', host: 'CLOUDNAME'} + PankoAdmin: {protocol: 'https', port: '8779', host: 'CLOUDNAME'} + PankoInternal: {protocol: 'https', port: '8779', host: 'CLOUDNAME'} + PankoPublic: {protocol: 'https', port: '13779', host: 'CLOUDNAME'} + SaharaAdmin: {protocol: 'https', port: '8386', host: 'CLOUDNAME'} + SaharaInternal: {protocol: 'https', port: '8386', host: 'CLOUDNAME'} + SaharaPublic: {protocol: 'https', port: '13386', host: 'CLOUDNAME'} + SwiftAdmin: {protocol: 'https', port: '8080', host: 'CLOUDNAME'} + SwiftInternal: {protocol: 'https', port: '8080', host: 'CLOUDNAME'} + SwiftPublic: {protocol: 'https', port: '13808', host: 'CLOUDNAME'} + TackerAdmin: {protocol: 'https', port: '9890', host: 'CLOUDNAME'} + TackerInternal: {protocol: 'https', port: '9890', host: 'CLOUDNAME'} + TackerPublic: {protocol: 'https', port: '13989', host: 'CLOUDNAME'} + ZaqarAdmin: {protocol: 'https', port: '8888', host: 'CLOUDNAME'} + ZaqarInternal: {protocol: 'https', port: '8888', host: 'CLOUDNAME'} + ZaqarPublic: {protocol: 'https', port: '13888', host: 'CLOUDNAME'} + ZaqarWebSocketAdmin: {protocol: 'wss', port: '9000', host: 'CLOUDNAME'} + ZaqarWebSocketInternal: {protocol: 'wss', port: '9000', host: 'CLOUDNAME'} + ZaqarWebSocketPublic: {protocol: 'wss', port: '9000', host: 'CLOUDNAME'} + diff --git a/environments/storage/cinder-netapp-config.yaml b/environments/storage/cinder-netapp-config.yaml new file mode 100644 index 00000000..4cdba09b --- /dev/null +++ b/environments/storage/cinder-netapp-config.yaml @@ -0,0 +1,119 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable the Cinder NetApp Backend +# description: | +# A Heat environment file which can be used to enable a +# a Cinder NetApp backend, configured via puppet +parameter_defaults: + # + # Type: string + CinderNetappBackendName: tripleo_netapp + + # + # Type: string + CinderNetappControllerIps: '' + + # + # Type: string + CinderNetappCopyOffloadToolPath: '' + + # + # Type: string + CinderNetappEseriesHostType: linux_dm_mp + + # + # Type: string + CinderNetappHostType: '' + + # + # Mandatory. This parameter must be set by the user. + # Type: string + CinderNetappLogin: <None> + + # + # Type: string + CinderNetappNfsMountOptions: '' + + # + # Type: string + CinderNetappNfsShares: '' + + # + # Type: string + CinderNetappNfsSharesConfig: /etc/cinder/shares.conf + + # + # Type: string + CinderNetappPartnerBackendName: '' + + # + # Mandatory. This parameter must be set by the user. + # Type: string + CinderNetappPassword: <None> + + # + # Type: string + CinderNetappSaPassword: '' + + # + # Mandatory. This parameter must be set by the user. + # Type: string + CinderNetappServerHostname: <None> + + # + # Type: string + CinderNetappServerPort: 80 + + # + # Type: string + CinderNetappSizeMultiplier: 1.2 + + # + # Type: string + CinderNetappStorageFamily: ontap_cluster + + # + # Type: string + CinderNetappStoragePools: '' + + # + # Type: string + CinderNetappStorageProtocol: nfs + + # + # Type: string + CinderNetappTransportType: http + + # + # Type: string + CinderNetappVfiler: '' + + # + # Type: string + CinderNetappVolumeList: '' + + # + # Type: string + CinderNetappVserver: '' + + # + # Type: string + CinderNetappWebservicePath: /devmgr/v2 + + # ****************************************************** + # Static parameters - these are values that must be + # included in the environment but should not be changed. + # ****************************************************** + # + # Type: boolean + CinderEnableNetappBackend: True + + # ********************* + # End static parameters + # ********************* +resource_registry: + OS::TripleO::ControllerExtraConfigPre: ../../puppet/extraconfig/pre_deploy/controller/cinder-netapp.yaml diff --git a/environments/storage/cinder-nfs.yaml b/environments/storage/cinder-nfs.yaml new file mode 100644 index 00000000..2de3e78c --- /dev/null +++ b/environments/storage/cinder-nfs.yaml @@ -0,0 +1,27 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable Cinder NFS Backend +# description: | +# Configure and include this environment to enable the use of an NFS +# share as the backend for Cinder. +parameter_defaults: + # Whether to enable or not the Iscsi backend for Cinder + # Type: boolean + CinderEnableIscsiBackend: False + + # Whether to enable or not the NFS backend for Cinder + # Type: boolean + CinderEnableNfsBackend: True + + # Mount options for NFS mounts used by Cinder NFS backend. Effective when CinderEnableNfsBackend is true. + # Type: string + CinderNfsMountOptions: '' + + # NFS servers used by Cinder NFS backend. Effective when CinderEnableNfsBackend is true. + # Type: comma_delimited_list + CinderNfsServers: 192.168.122.1:/export/cinder + diff --git a/environments/storage/enable-ceph.yaml b/environments/storage/enable-ceph.yaml new file mode 100644 index 00000000..c629f74b --- /dev/null +++ b/environments/storage/enable-ceph.yaml @@ -0,0 +1,35 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable Ceph Storage Backend +# description: | +# Include this environment to enable Ceph as the backend for +# Cinder, Nova, Gnocchi, and Glance. +parameter_defaults: + # The short name of the Cinder Backup backend to use. + # Type: string + CinderBackupBackend: rbd + + # Whether to enable or not the Iscsi backend for Cinder + # Type: boolean + CinderEnableIscsiBackend: False + + # Whether to enable or not the Rbd backend for Cinder + # Type: boolean + CinderEnableRbdBackend: True + + # The short name of the Glance backend to use. Should be one of swift, rbd, or file + # Type: string + GlanceBackend: rbd + + # The short name of the Gnocchi backend to use. Should be one of swift, rbd, or file + # Type: string + GnocchiBackend: rbd + + # Whether to enable or not the Rbd backend for Nova + # Type: boolean + NovaEnableRbdBackend: True + diff --git a/environments/storage/external-ceph.yaml b/environments/storage/external-ceph.yaml new file mode 100644 index 00000000..f1c9d516 --- /dev/null +++ b/environments/storage/external-ceph.yaml @@ -0,0 +1,78 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Deploy Using an External Ceph Cluster +# description: | +# A Heat environment file which can be used to enable the +# use of an externally managed Ceph cluster. +parameter_defaults: + # The Ceph admin client key. Can be created with ceph-authtool --gen-print-key. + # Type: string + CephAdminKey: '' + + # The Ceph client key. Can be created with ceph-authtool --gen-print-key. Currently only used for external Ceph deployments to create the openstack user keyring. + # Mandatory. This parameter must be set by the user. + # Type: string + CephClientKey: <None> + + # + # Type: string + CephClientUserName: openstack + + # The Ceph cluster FSID. Must be a UUID. + # Mandatory. This parameter must be set by the user. + # Type: string + CephClusterFSID: <None> + + # List of externally managed Ceph Mon Host IPs. Only used for external Ceph deployments. + # Type: string + CephExternalMonHost: '' + + # Whether to enable or not the Iscsi backend for Cinder + # Type: boolean + CinderEnableIscsiBackend: False + + # Whether to enable or not the Rbd backend for Cinder + # Type: boolean + CinderEnableRbdBackend: True + + # + # Type: string + CinderRbdPoolName: volumes + + # The short name of the Glance backend to use. Should be one of swift, rbd, or file + # Type: string + GlanceBackend: rbd + + # + # Type: string + GlanceRbdPoolName: images + + # The short name of the Gnocchi backend to use. Should be one of swift, rbd, or file + # Type: string + GnocchiBackend: rbd + + # + # Type: string + GnocchiRbdPoolName: metrics + + # Whether to enable or not the Rbd backend for Nova + # Type: boolean + NovaEnableRbdBackend: True + + # + # Type: string + NovaRbdPoolName: vms + + # The default features enabled when creating a block device image. Only applies to format 2 images. Set to '1' for Jewel clients using older Ceph servers. + # Type: string + RbdDefaultFeatures: '' + +resource_registry: + OS::TripleO::Services::CephClient: OS::Heat::None + OS::TripleO::Services::CephExternal: ../../puppet/services/ceph-external.yaml + OS::TripleO::Services::CephMon: OS::Heat::None + OS::TripleO::Services::CephOSD: OS::Heat::None diff --git a/environments/storage/glance-nfs.yaml b/environments/storage/glance-nfs.yaml new file mode 100644 index 00000000..3c139306 --- /dev/null +++ b/environments/storage/glance-nfs.yaml @@ -0,0 +1,34 @@ +# ******************************************************************* +# This file was created automatically by the sample environment +# generator. Developers should use `tox -e genconfig` to update it. +# Users are recommended to make changes to a copy of the file instead +# of the original, if any customizations are needed. +# ******************************************************************* +# title: Enable Glance NFS Backend +# description: | +# Configure and include this environment to enable the use of an NFS +# share as the backend for Glance. +parameter_defaults: + # NFS mount options for image storage (when GlanceNfsEnabled is true) + # Type: string + GlanceNfsOptions: intr,context=system_u:object_r:glance_var_lib_t:s0 + + # NFS share to mount for image storage (when GlanceNfsEnabled is true) + # Type: string + GlanceNfsShare: '' + + # ****************************************************** + # Static parameters - these are values that must be + # included in the environment but should not be changed. + # ****************************************************** + # The short name of the Glance backend to use. Should be one of swift, rbd, or file + # Type: string + GlanceBackend: file + + # When using GlanceBackend 'file', mount NFS share for image storage. + # Type: boolean + GlanceNfsEnabled: True + + # ********************* + # End static parameters + # ********************* diff --git a/environments/tls-endpoints-public-dns.yaml b/environments/tls-endpoints-public-dns.yaml index 92b696b7..83b32495 100644 --- a/environments/tls-endpoints-public-dns.yaml +++ b/environments/tls-endpoints-public-dns.yaml @@ -1,3 +1,7 @@ +# ************************************************************************************* +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/tls-endpoints-public-dns.yaml +# instead. +# ************************************************************************************* # Use this environment when deploying an SSL-enabled overcloud where the public # endpoint is a DNS name. parameter_defaults: diff --git a/environments/tls-endpoints-public-ip.yaml b/environments/tls-endpoints-public-ip.yaml index c879ff94..8e502972 100644 --- a/environments/tls-endpoints-public-ip.yaml +++ b/environments/tls-endpoints-public-ip.yaml @@ -1,3 +1,7 @@ +# ************************************************************************************* +# DEPRECATED: Use tripleo-heat-templates/environments/ssl/tls-endpoints-public-ip.yaml +# instead. +# ************************************************************************************* # Use this environment when deploying an SSL-enabled overcloud where the public # endpoint is an IP address. parameter_defaults: diff --git a/environments/undercloud.yaml b/environments/undercloud.yaml index 7a2716da..559d81df 100644 --- a/environments/undercloud.yaml +++ b/environments/undercloud.yaml @@ -18,3 +18,5 @@ parameter_defaults: HeatConvergenceEngine: false HeatMaxResourcesPerStack: -1 HeatMaxJsonBodySize: 2097152 + IronicInspectorInterface: br-ctlplane + IronicInspectorIpRange: '192.168.24.100,192.168.24.200' |