diff options
84 files changed, 1411 insertions, 584 deletions
diff --git a/environments/cinder-netapp-config.yaml b/environments/cinder-netapp-config.yaml index 0437cc67..b9a84342 100644 --- a/environments/cinder-netapp-config.yaml +++ b/environments/cinder-netapp-config.yaml @@ -25,5 +25,5 @@ parameter_defaults: CinderNetappControllerIps: '' CinderNetappSaPassword: '' CinderNetappStoragePools: '' - CinderNetappEseriesHostType: 'linux_dm_mp' + CinderNetappHostType: '' CinderNetappWebservicePath: '/devmgr/v2' diff --git a/environments/debug.yaml b/environments/debug.yaml new file mode 100644 index 00000000..b938555c --- /dev/null +++ b/environments/debug.yaml @@ -0,0 +1,5 @@ +# A Heat environment file which can be used to enable the debug +# setting in the overcloud openstack services configuration. + +parameter_defaults: + Debug: true diff --git a/environments/logging-environment.yaml b/environments/logging-environment.yaml index eefa7026..c583ca79 100644 --- a/environments/logging-environment.yaml +++ b/environments/logging-environment.yaml @@ -4,7 +4,7 @@ resource_registry: OS::TripleO::Services::FluentdClient: ../puppet/services/logging/fluentd-client.yaml -parameter_defaults: +#parameter_defaults: ## Simple configuration # diff --git a/environments/major-upgrade-ceilometer-wsgi-mitaka-newton.yaml b/environments/major-upgrade-ceilometer-wsgi-mitaka-newton.yaml new file mode 100644 index 00000000..6798c255 --- /dev/null +++ b/environments/major-upgrade-ceilometer-wsgi-mitaka-newton.yaml @@ -0,0 +1,7 @@ +resource_registry: + + # This initiates the upgrades for ceilometer api to run under apache wsgi + OS::TripleO::Tasks::UpdateWorkflow: ../extraconfig/tasks/major_upgrade_ceilometer_wsgi_mitaka_newton.yaml + + # no-op the rest + OS::TripleO::PostDeploySteps: OS::Heat::None diff --git a/environments/major-upgrade-pacemaker-converge.yaml b/environments/major-upgrade-pacemaker-converge.yaml index f023cb32..e9a5f9be 100644 --- a/environments/major-upgrade-pacemaker-converge.yaml +++ b/environments/major-upgrade-pacemaker-converge.yaml @@ -1,2 +1,6 @@ parameter_defaults: UpgradeLevelNovaCompute: '' + +resource_registry: + OS::TripleO::Services::SaharaApi: ../puppet/services/sahara-api.yaml + OS::TripleO::Services::SaharaEngine: ../puppet/services/sahara-engine.yaml diff --git a/environments/major-upgrade-remove-sahara.yaml b/environments/major-upgrade-remove-sahara.yaml new file mode 100644 index 00000000..e0aaf130 --- /dev/null +++ b/environments/major-upgrade-remove-sahara.yaml @@ -0,0 +1,6 @@ +parameter_defaults: + KeepSaharaServicesOnUpgrade: false +resource_registry: + OS::TripleO::Services::SaharaApi: OS::Heat::None + OS::TripleO::Services::SaharaEngine: OS::Heat::None + diff --git a/environments/manage-firewall.yaml b/environments/manage-firewall.yaml deleted file mode 100644 index 5d48698e..00000000 --- a/environments/manage-firewall.yaml +++ /dev/null @@ -1,2 +0,0 @@ -parameter_defaults: - ManageFirewall: true diff --git a/environments/manila-cephfsnative-config.yaml b/environments/manila-cephfsnative-config.yaml index 4115d8b2..825a5066 100644 --- a/environments/manila-cephfsnative-config.yaml +++ b/environments/manila-cephfsnative-config.yaml @@ -9,10 +9,9 @@ resource_registry: parameter_defaults: - ManilaCephFSNativeEnableBackend: true ManilaCephFSNativeBackendName: cephfsnative ManilaCephFSNativeDriverHandlesShareServers: false - ManilaCephFSNativeCephFSConfPath: '/etc/ceph/cephfs.conf' + ManilaCephFSNativeCephFSConfPath: '/etc/ceph/ceph.conf' ManilaCephFSNativeCephFSAuthId: 'manila' ManilaCephFSNativeCephFSClusterName: 'ceph' ManilaCephFSNativeCephFSEnableSnapshots: true diff --git a/environments/manila-generic-config.yaml b/environments/manila-generic-config.yaml index a847a02b..9344bc6e 100644 --- a/environments/manila-generic-config.yaml +++ b/environments/manila-generic-config.yaml @@ -11,7 +11,6 @@ parameter_defaults: ManilaServiceInstancePassword: '' ManilaServiceInstanceFlavorId: 2 ManilaServiceNetworkCidr: '172.16.0.0/16' - ManilaGenericEnableBackend: true ManilaGenericBackendName: tripleo_generic ManilaGenericDriverHandlesShareServers: true ManilaGenericSmbTemplateConfigPath: '$state_path/smb.conf' diff --git a/environments/manila-netapp-config.yaml b/environments/manila-netapp-config.yaml index 98de6adf..3dadfe5d 100644 --- a/environments/manila-netapp-config.yaml +++ b/environments/manila-netapp-config.yaml @@ -7,7 +7,6 @@ resource_registry: OS::Tripleo::Services::ManilaBackendNetapp: ../puppet/services/manila-backend-netapp.yaml parameter_defaults: - ManilaNetappEnableBackend: true ManilaNetappBackendName: tripleo_netapp ManilaNetappDriverHandlesShareServers: true ManilaNetappLogin: '' diff --git a/environments/monitoring-environment.yaml b/environments/monitoring-environment.yaml index a8ad2084..62ab06dc 100644 --- a/environments/monitoring-environment.yaml +++ b/environments/monitoring-environment.yaml @@ -4,7 +4,7 @@ resource_registry: OS::TripleO::Services::SensuClient: ../puppet/services/monitoring/sensu-client.yaml -parameter_defaults: +#parameter_defaults: #### Sensu settings #### ##MonitoringRabbitHost: 10.10.10.10 ##MonitoringRabbitPort: 5672 diff --git a/environments/neutron-opendaylight-l3.yaml b/environments/neutron-opendaylight-l3.yaml index d61270b2..0e8fb9aa 100644 --- a/environments/neutron-opendaylight-l3.yaml +++ b/environments/neutron-opendaylight-l3.yaml @@ -2,8 +2,8 @@ resource_registry: OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None - OS::TripleO::Services::OpenDaylight: puppet/services/opendaylight-api.yaml - OS::TripleO::Services::OpenDaylightOvs: puppet/services/opendaylight-ovs.yaml + OS::TripleO::Services::OpenDaylightApi: ../puppet/services/opendaylight-api.yaml + OS::TripleO::Services::OpenDaylightOvs: ../puppet/services/opendaylight-ovs.yaml OS::TripleO::Services::NeutronL3Agent: OS::Heat::None parameter_defaults: diff --git a/environments/neutron-opendaylight.yaml b/environments/neutron-opendaylight.yaml index 8fa2e542..a0fe4514 100644 --- a/environments/neutron-opendaylight.yaml +++ b/environments/neutron-opendaylight.yaml @@ -2,8 +2,8 @@ resource_registry: OS::TripleO::Services::NeutronOvsAgent: OS::Heat::None OS::TripleO::Services::ComputeNeutronOvsAgent: OS::Heat::None - OS::TripleO::Services::OpenDaylight: puppet/services/opendaylight-api.yaml - OS::TripleO::Services::OpenDaylightOvs: puppet/services/opendaylight-ovs.yaml + OS::TripleO::Services::OpenDaylightApi: ../puppet/services/opendaylight-api.yaml + OS::TripleO::Services::OpenDaylightOvs: ../puppet/services/opendaylight-ovs.yaml parameter_defaults: EnableOpenDaylightOnController: true diff --git a/extraconfig/tasks/major_upgrade_ceilometer_wsgi_mitaka_newton.yaml b/extraconfig/tasks/major_upgrade_ceilometer_wsgi_mitaka_newton.yaml new file mode 100644 index 00000000..c87e6824 --- /dev/null +++ b/extraconfig/tasks/major_upgrade_ceilometer_wsgi_mitaka_newton.yaml @@ -0,0 +1,62 @@ +heat_template_version: 2014-10-16 + +description: > + Software-config for ceilometer configuration under httpd during upgrades + +parameters: + servers: + type: json + input_values: + type: json + description: input values for the software deployments +resources: + CeilometerWsgiMitakaNewtonPreUpgradeConfig: + type: OS::Heat::SoftwareConfig + properties: + group: puppet + config: + get_file: mitaka_to_newton_ceilometer_wsgi_upgrade.pp + + CeilometerWsgiMitakaNewtonUpgradeConfig: + type: OS::Heat::SoftwareConfig + properties: + group: script + config: + list_join: + - '' + - - "#!/bin/bash\n\nset -e\n\n" + - get_file: pacemaker_common_functions.sh + - get_file: major_upgrade_pacemaker_migrations.sh + - "disable_standalone_ceilometer_api\n\n" + + CeilometerWsgiMitakaNewtonPostUpgradeConfig: + type: OS::Heat::SoftwareConfig + properties: + group: script + config: | + #!/bin/bash + set -e + /usr/bin/systemctl reload httpd + + CeilometerWsgiMitakaNewtonPreUpgradeDeployment: + type: OS::Heat::SoftwareDeploymentGroup + properties: + name: CeilometerWsgiMitakaNewtonPreUpgradeDeployment + servers: {get_param: [servers, Controller]} + config: {get_resource: CeilometerWsgiMitakaNewtonPreUpgradeConfig} + + CeilometerWsgiMitakaNewtonUpgradeConfigDeployment: + type: OS::Heat::SoftwareDeploymentGroup + depends_on: CeilometerWsgiMitakaNewtonPreUpgradeDeployment + properties: + name: CeilometerWsgiMitakaNewtonUpgradeConfigDeployment + servers: {get_param: [servers, Controller]} + config: {get_resource: CeilometerWsgiMitakaNewtonUpgradeConfig} + + CeilometerWsgiMitakaNewtonPostUpgradeDeployment: + type: OS::Heat::SoftwareDeploymentGroup + depends_on: CeilometerWsgiMitakaNewtonUpgradeConfigDeployment + properties: + name: CeilometerWsgiMitakaNewtonPostUpgradeDeployment + servers: {get_param: [servers, Controller]} + config: {get_resource: CeilometerWsgiMitakaNewtonPostUpgradeConfig} diff --git a/extraconfig/tasks/major_upgrade_ceph_mon.sh b/extraconfig/tasks/major_upgrade_ceph_mon.sh index b633e658..e0d160f1 100755 --- a/extraconfig/tasks/major_upgrade_ceph_mon.sh +++ b/extraconfig/tasks/major_upgrade_ceph_mon.sh @@ -5,7 +5,7 @@ set -o pipefail echo INFO: starting $(basename "$0") # Exit if not running -if ! pidof ceph-mon; then +if ! pidof ceph-mon &> /dev/null; then echo INFO: ceph-mon is not running, skipping exit 0 fi @@ -54,7 +54,7 @@ if [[ "$UPDATED_VERSION" =~ ^0\.94.* ]]; then elif [[ "$UPDATED_VERSION" =~ ^10\.2.* ]]; then # RPM could own some of these but we can't take risks on the pre-existing files for d in /var/lib/ceph/mon /var/log/ceph /var/run/ceph /etc/ceph; do - chown -R ceph:ceph $d || echo WARNING: chown of $d failed + chown -L -R ceph:ceph $d || echo WARNING: chown of $d failed done # Replay udev events with newer rules @@ -71,6 +71,10 @@ elif [[ "$UPDATED_VERSION" =~ ^10\.2.* ]]; then sleep 10; done" + # if tunables become legacy, cluster status will be HEALTH_WARN causing + # upgrade to fail on following node + ceph osd crush tunables default + echo INFO: Ceph was upgraded to Jewel else echo ERROR: Ceph was upgraded to an unknown release, daemon is stopped, need manual intervention diff --git a/extraconfig/tasks/major_upgrade_ceph_storage.sh b/extraconfig/tasks/major_upgrade_ceph_storage.sh index dc80a724..56b54e22 100644 --- a/extraconfig/tasks/major_upgrade_ceph_storage.sh +++ b/extraconfig/tasks/major_upgrade_ceph_storage.sh @@ -18,7 +18,7 @@ set -eu echo INFO: starting $(basename "$0") # Exit if not running -if ! pidof ceph-osd; then +if ! pidof ceph-osd &> /dev/null; then echo INFO: ceph-osd is not running, skipping exit 0 fi @@ -63,12 +63,22 @@ if [[ "$UPDATED_VERSION" =~ ^0\.94.* ]]; then elif [[ "$UPDATED_VERSION" =~ ^10\.2.* ]]; then # RPM could own some of these but we can't take risks on the pre-existing files for d in /var/lib/ceph/osd /var/log/ceph /var/run/ceph /etc/ceph; do - chown -R ceph:ceph $d || echo WARNING: chown of $d failed + chown -L -R ceph:ceph $d || echo WARNING: chown of $d failed done # Replay udev events with newer rules udevadm trigger && udevadm settle + # If on ext4, we need to enforce lower values for name and namespace len + # or ceph-osd will refuse to start, see: http://tracker.ceph.com/issues/16187 + for OSD_ID in $OSD_IDS; do + OSD_FS=$(findmnt -n -o FSTYPE -T /var/lib/ceph/osd/ceph-${OSD_ID}) + if [ ${OSD_FS} = ext4 ]; then + crudini --set /etc/ceph/ceph.conf global osd_max_object_name_len 256 + crudini --set /etc/ceph/ceph.conf global osd_max_object_namespace_len 64 + fi + done + # Enable systemd unit systemctl enable ceph-osd.target for OSD_ID in $OSD_IDS; do diff --git a/extraconfig/tasks/major_upgrade_controller_pacemaker_1.sh b/extraconfig/tasks/major_upgrade_controller_pacemaker_1.sh index d4200e5f..23074fcb 100755 --- a/extraconfig/tasks/major_upgrade_controller_pacemaker_1.sh +++ b/extraconfig/tasks/major_upgrade_controller_pacemaker_1.sh @@ -20,9 +20,13 @@ check_disk_for_mysql_dump STONITH_STATE=$(pcs property show stonith-enabled | grep "stonith-enabled" | awk '{ print $2 }') pcs property set stonith-enabled=false -# Migrate to HA NG +# Migrate to HA NG and fix up rabbitmq queues +# We fix up the rabbitmq ha queues after the migration because it will +# restart the rabbitmq resource. Doing it after the migration means no other +# services will be restart as there are no other constraints if [[ -n $(is_bootstrap_node) ]]; then migrate_full_to_ng_ha + rabbitmq_mitaka_newton_upgrade fi # After migrating the cluster to HA-NG the services not under pacemaker's control diff --git a/extraconfig/tasks/major_upgrade_controller_pacemaker_2.sh b/extraconfig/tasks/major_upgrade_controller_pacemaker_2.sh index fc365939..b3a0098c 100755 --- a/extraconfig/tasks/major_upgrade_controller_pacemaker_2.sh +++ b/extraconfig/tasks/major_upgrade_controller_pacemaker_2.sh @@ -33,7 +33,7 @@ fi start_or_enable_service galera check_resource galera started 600 start_or_enable_service redis -check_resource galera started 600 +check_resource redis started 600 # We need mongod which is now a systemd service up and running before calling # ceilometer-dbsync. There is still a race here: mongod might not be up on all nodes # so ceilometer-dbsync will fail a couple of times before that. As it retries indefinitely @@ -65,6 +65,5 @@ if [[ -n $(is_bootstrap_node) ]]; then nova-manage api_db sync nova-manage db online_data_migrations gnocchi-upgrade - #TODO(marios):someone from sahara needs to check this: - # sahara-db-manage --config-file /etc/sahara/sahara.conf upgrade head + sahara-db-manage --config-file /etc/sahara/sahara.conf upgrade head fi diff --git a/extraconfig/tasks/major_upgrade_controller_pacemaker_3.sh b/extraconfig/tasks/major_upgrade_controller_pacemaker_3.sh index 4d72fbd8..b653c7c7 100755 --- a/extraconfig/tasks/major_upgrade_controller_pacemaker_3.sh +++ b/extraconfig/tasks/major_upgrade_controller_pacemaker_3.sh @@ -16,7 +16,11 @@ systemctl_swift start # We need to start the systemd services we explicitely stopped at step _1.sh # FIXME: Should we let puppet during the convergence step do the service enabling or # should we add it here? -for service in $(services_to_migrate); do +services=$(services_to_migrate) +if [[ ${keep_sahara_services_on_upgrade} =~ [Ff]alse ]] ; then + services=${services%%openstack-sahara*} +fi +for service in $services; do manage_systemd_service start "${service%%-clone}" check_resource_systemd "${service%%-clone}" started 600 done diff --git a/extraconfig/tasks/major_upgrade_pacemaker.yaml b/extraconfig/tasks/major_upgrade_pacemaker.yaml index 30ae8d1e..7c78d5ad 100644 --- a/extraconfig/tasks/major_upgrade_pacemaker.yaml +++ b/extraconfig/tasks/major_upgrade_pacemaker.yaml @@ -22,6 +22,11 @@ parameters: type: boolean default: false description: If enabled, Ceph upgrade will be forced even though cluster or PGs status is not clean + KeepSaharaServicesOnUpgrade: + type: boolean + default: true + description: Whether to keep Sahara services when upgrading controller nodes from mitaka to newton + resources: # TODO(jistr): for Mitaka->Newton upgrades and further we can use @@ -127,7 +132,13 @@ resources: config: list_join: - '' - - - get_file: pacemaker_common_functions.sh + - - str_replace: + template: | + #!/bin/bash + keep_sahara_services_on_upgrade='KEEP_SAHARA_SERVICES_ON_UPGRADE' + params: + KEEP_SAHARA_SERVICES_ON_UPGRADE: {get_param: KeepSaharaServicesOnUpgrade} + - get_file: pacemaker_common_functions.sh - get_file: major_upgrade_pacemaker_migrations.sh - get_file: major_upgrade_controller_pacemaker_3.sh diff --git a/extraconfig/tasks/major_upgrade_pacemaker_migrations.sh b/extraconfig/tasks/major_upgrade_pacemaker_migrations.sh index cd78f838..7c9083a4 100644 --- a/extraconfig/tasks/major_upgrade_pacemaker_migrations.sh +++ b/extraconfig/tasks/major_upgrade_pacemaker_migrations.sh @@ -77,7 +77,6 @@ function services_to_migrate { openstack-aodh-evaluator-clone openstack-aodh-listener-clone openstack-aodh-notifier-clone - openstack-ceilometer-api-clone openstack-ceilometer-central-clone openstack-ceilometer-collector-clone openstack-ceilometer-notification-clone @@ -154,7 +153,7 @@ function migrate_full_to_ng_ha { fi pcs resource delete --force "$resource" else - log_debug "Service $service not found as a pacemaker resource, not trying to delete." + log_debug "Service $resource not found as a pacemaker resource, not trying to delete." fi done @@ -169,3 +168,14 @@ function migrate_full_to_ng_ha { fi fi } + +function disable_standalone_ceilometer_api { + if [[ -n $(is_bootstrap_node) ]]; then + if [[ -n $(is_pacemaker_managed openstack-ceilometer-api) ]]; then + # Disable pacemaker resources for ceilometer-api + manage_pacemaker_service disable openstack-ceilometer-api + check_resource_pacemaker openstack-ceilometer-api stopped 600 + pcs resource delete openstack-ceilometer-api --wait=600 + fi + fi +} diff --git a/extraconfig/tasks/mitaka_to_newton_ceilometer_wsgi_upgrade.pp b/extraconfig/tasks/mitaka_to_newton_ceilometer_wsgi_upgrade.pp new file mode 100644 index 00000000..1c376285 --- /dev/null +++ b/extraconfig/tasks/mitaka_to_newton_ceilometer_wsgi_upgrade.pp @@ -0,0 +1,97 @@ +# Copyright 2015 Red Hat, Inc. +# All Rights Reserved. +# +# Licensed under the Apache License, Version 2.0 (the "License"); you may +# not use this file except in compliance with the License. You may obtain +# a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT +# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the +# License for the specific language governing permissions and limitations +# under the License. + +# This puppet manifest is to be used only during a Mitaka->Newton upgrade +# It configures ceilometer to be run under httpd but it makes sure to not +# restart any services. This snippet needs to be called before init as a +# pre upgrade migration. + +Service <| + tag == 'ceilometer-service' +|> { + hasrestart => true, + restart => '/bin/true', + start => '/bin/true', + stop => '/bin/true', +} + +if $::hostname == downcase(hiera('bootstrap_nodeid')) { + $pacemaker_master = true + $sync_db = true +} else { + $pacemaker_master = false + $sync_db = false +} + +include ::tripleo::packages + + +if str2bool(hiera('mongodb::server::ipv6', false)) { + $mongo_node_ips_with_port_prefixed = prefix(hiera('mongodb_node_ips'), '[') + $mongo_node_ips_with_port = suffix($mongo_node_ips_with_port_prefixed, ']:27017') +} else { + $mongo_node_ips_with_port = suffix(hiera('mongodb_node_ips'), ':27017') +} +$mongodb_replset = hiera('mongodb::server::replset') +$mongo_node_string = join($mongo_node_ips_with_port, ',') +$database_connection = "mongodb://${mongo_node_string}/ceilometer?replicaSet=${mongodb_replset}" + +include ::ceilometer + +class {'::ceilometer::db': + database_connection => $database_connection, +} + +if $sync_db { + include ::ceilometer::db::sync +} + +include ::ceilometer::config + +class { '::ceilometer::api': + enabled => true, + service_name => 'httpd', + keystone_password => hiera('ceilometer::keystone::auth::password'), + identity_uri => hiera('ceilometer::keystone::authtoken::auth_url'), + auth_uri => hiera('ceilometer::keystone::authtoken::auth_uri'), + keystone_tenant => hiera('ceilometer::keystone::authtoken::project_name'), +} + +class { '::apache' : + service_enable => false, + service_manage => true, + service_restart => '/bin/true', + purge_configs => false, + purge_vhost_dir => false, +} + +# To ensure existing ports are not overridden +class { '::aodh::wsgi::apache': + servername => $::hostname, + ssl => false, +} +class { '::gnocchi::wsgi::apache': + servername => $::hostname, + ssl => false, +} + +class { '::keystone::wsgi::apache': + servername => $::hostname, + ssl => false, +} +class { '::ceilometer::wsgi::apache': + servername => $::hostname, + ssl => false, +} diff --git a/j2_excludes.yaml b/j2_excludes.yaml new file mode 100644 index 00000000..063e63d4 --- /dev/null +++ b/j2_excludes.yaml @@ -0,0 +1,10 @@ +# This template specifies which j2 rendered templates +# should be excluded in the render process from +# tripleo-common/tripleo_common/actions/templates.py + +name: + - puppet/controller-role.yaml + - puppet/compute-role.yaml + - puppet/blockstorage-role.yaml + - puppet/objectstorage-role.yaml + - puppet/cephstorage-role.yaml diff --git a/network/external.yaml b/network/external.yaml index 3b24da7e..4dfbc77e 100644 --- a/network/external.yaml +++ b/network/external.yaml @@ -37,6 +37,10 @@ parameters: default: [{'start': '10.0.0.4', 'end': '10.0.0.250'}] description: Ip allocation pool range for the external network. type: json + ExternalInterfaceDefaultRoute: + default: '10.0.0.1' + description: default route for the external network + type: string resources: ExternalNetwork: @@ -55,6 +59,7 @@ resources: name: {get_param: ExternalSubnetName} network: {get_resource: ExternalNetwork} allocation_pools: {get_param: ExternalAllocationPools} + gateway_ip: {get_param: ExternalInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/external_v6.yaml b/network/external_v6.yaml index 3e120f24..e0736ab7 100644 --- a/network/external_v6.yaml +++ b/network/external_v6.yaml @@ -42,6 +42,10 @@ parameters: default: dhcpv6-stateful description: Neutron subnet IPv6 router advertisement mode type: string + ExternalInterfaceDefaultRoute: + default: '2001:db8:fd00:1000::1' + description: default route for the external network + type: string resources: ExternalNetwork: @@ -62,6 +66,7 @@ resources: name: {get_param: ExternalSubnetName} network: {get_resource: ExternalNetwork} allocation_pools: {get_param: ExternalAllocationPools} + gateway_ip: {get_param: ExternalInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/internal_api.yaml b/network/internal_api.yaml index 6f8aa3a8..090e38f7 100644 --- a/network/internal_api.yaml +++ b/network/internal_api.yaml @@ -55,6 +55,7 @@ resources: name: {get_param: InternalApiSubnetName} network: {get_resource: InternalApiNetwork} allocation_pools: {get_param: InternalApiAllocationPools} + gateway_ip: null outputs: OS::stack_id: diff --git a/network/internal_api_v6.yaml b/network/internal_api_v6.yaml index 68c14fbe..19d64b0a 100644 --- a/network/internal_api_v6.yaml +++ b/network/internal_api_v6.yaml @@ -62,6 +62,7 @@ resources: name: {get_param: InternalApiSubnetName} network: {get_resource: InternalApiNetwork} allocation_pools: {get_param: InternalApiAllocationPools} + gateway_ip: null outputs: OS::stack_id: diff --git a/network/management.yaml b/network/management.yaml index 6878bac4..6798e11e 100644 --- a/network/management.yaml +++ b/network/management.yaml @@ -13,7 +13,7 @@ parameters: ManagementNetValueSpecs: default: {'provider:physical_network': 'management', 'provider:network_type': 'flat'} description: Value specs for the management network. - type: json + type: json ManagementNetAdminStateUp: default: false description: The admin state of the network. @@ -38,6 +38,10 @@ parameters: default: [{'start': '10.0.1.4', 'end': '10.0.1.250'}] description: Ip allocation pool range for the management network. type: json + ManagementInterfaceDefaultRoute: + default: null + description: The default route of the management network. + type: string resources: ManagementNetwork: @@ -56,6 +60,7 @@ resources: name: {get_param: ManagementSubnetName} network: {get_resource: ManagementNetwork} allocation_pools: {get_param: ManagementAllocationPools} + gateway_ip: {get_param: ManagementInterfaceDefaultRoute} outputs: OS::stack_id: diff --git a/network/ports/net_ip_list_map.yaml b/network/ports/net_ip_list_map.yaml index 07e2de4c..d7863e02 100644 --- a/network/ports/net_ip_list_map.yaml +++ b/network/ports/net_ip_list_map.yaml @@ -31,6 +31,32 @@ parameters: ServiceHostnameList: default: [] type: comma_delimited_list + NetworkHostnameMap: + default: [] + type: json + +resources: + # This adds the extra "services" on for keystone + # so that keystone_admin_api_network and + # keystone_public_api_network point to the correct + # network on the nodes running the "keystone" service + EnabledServicesValue: + type: OS::Heat::Value + properties: + type: comma_delimited_list + value: + yaql: + expression: let(root => $) -> $.data.extra_services.items().where($[0] in $root.data.enabled_services).select($[1]).flatten() + $root.data.enabled_services + data: + enabled_services: {get_param: EnabledServices} + extra_services: + # If anything other than keystone needs this + # then we should add an extra_networks interface + # to the service templates role_data but for + # now we hard-code the keystone special case + keystone: + - keystone_admin_api + - keystone_public_api outputs: net_ip_map: @@ -64,7 +90,7 @@ outputs: template: SERVICE_node_ips: SERVICE_network for_each: - SERVICE: {get_param: EnabledServices} + SERVICE: {get_attr: [EnabledServicesValue, value]} - values: {get_param: ServiceNetMap} - values: ctlplane: {get_param: ControlPlaneIpList} @@ -78,6 +104,28 @@ outputs: description: > Map of enabled services to a list of hostnames where they're running value: + map_replace: + - yaql: + # This filters any entries where the value hasn't been substituted for + # a list, e.g it's still $service_network. This happens when there is + # no network defined for the service in the ServiceNetMap, which is OK + # as not all services have to be bound to a network, so we filter them + expression: dict($.data.map.items().where(not $[1].endsWith("_network"))) + data: + map: + map_replace: + - map_merge: + repeat: + template: + SERVICE_node_names: SERVICE_network + for_each: + SERVICE: {get_attr: [EnabledServicesValue, value]} + - values: {get_param: ServiceNetMap} + - values: {get_param: NetworkHostnameMap} + short_service_hostnames: + description: > + Map of enabled services to a list of hostnames where they're running regardless of the network + value: yaql: # If ServiceHostnameList is empty the role is deployed with zero nodes # therefore we don't want to add any *_node_names to the map @@ -87,6 +135,6 @@ outputs: map_merge: repeat: template: - SERVICE_node_names: {get_param: ServiceHostnameList} + SERVICE_short_node_names: {get_param: ServiceHostnameList} for_each: - SERVICE: {get_param: EnabledServices} + SERVICE: {get_attr: [EnabledServicesValue, value]} diff --git a/network/service_net_map.yaml b/network/service_net_map.j2.yaml index 6e5c2449..c4d86fb9 100644 --- a/network/service_net_map.yaml +++ b/network/service_net_map.j2.yaml @@ -8,9 +8,17 @@ parameters: description: Mapping of service_name -> network name. Typically set via parameter_defaults in the resource registry. This mapping overrides those in ServiceNetMapDefaults. + Note that the key in this map must match the service_name + in the service template, e.g if the service_name is heat_api + the key must be either heat_api_network, or optionally + HeatApiNetwork (which will be internally converted to + transform captalization to underscores). default: {} type: json + # Note that the key in this map must match the service_name + # see the description above about conversion from CamelCase to + # snake_case - the names must still match when converted ServiceNetMapDefaults: default: ApacheNetwork: internal_api @@ -46,13 +54,14 @@ parameters: CephClusterNetwork: storage_mgmt CephMonNetwork: storage CephRgwNetwork: storage - ControllerHostnameResolveNetwork: internal_api - ComputeHostnameResolveNetwork: internal_api - BlockStorageHostnameResolveNetwork: internal_api - ObjectStorageHostnameResolveNetwork: internal_api - CephStorageHostnameResolveNetwork: storage PublicNetwork: external - OpenDaylightApiNetwork: internal_api + OpendaylightApiNetwork: internal_api + # We special-case the default ResolveNetwork for the CephStorage role + # for backwards compatibility, all other roles default to internal_api + CephStorageHostnameResolveNetwork: storage +{% for role in roles if role.name != 'CephStorage' %} + {{role.name}}HostnameResolveNetwork: internal_api +{% endfor %} description: Mapping of service_name -> network name. Typically set via parameter_defaults in the resource registry. type: json diff --git a/network/storage.yaml b/network/storage.yaml index dc9f35ea..35dae17a 100644 --- a/network/storage.yaml +++ b/network/storage.yaml @@ -55,6 +55,7 @@ resources: name: {get_param: StorageSubnetName} network: {get_resource: StorageNetwork} allocation_pools: {get_param: StorageAllocationPools} + gateway_ip: null outputs: OS::stack_id: diff --git a/network/storage_mgmt.yaml b/network/storage_mgmt.yaml index 59933c8c..03cfd139 100644 --- a/network/storage_mgmt.yaml +++ b/network/storage_mgmt.yaml @@ -55,6 +55,7 @@ resources: name: {get_param: StorageMgmtSubnetName} network: {get_resource: StorageMgmtNetwork} allocation_pools: {get_param: StorageMgmtAllocationPools} + gateway_ip: null outputs: OS::stack_id: diff --git a/network/storage_mgmt_v6.yaml b/network/storage_mgmt_v6.yaml index f05644ef..39c456db 100644 --- a/network/storage_mgmt_v6.yaml +++ b/network/storage_mgmt_v6.yaml @@ -62,6 +62,7 @@ resources: name: {get_param: StorageMgmtSubnetName} network: {get_resource: StorageMgmtNetwork} allocation_pools: {get_param: StorageMgmtAllocationPools} + gateway_ip: null outputs: OS::stack_id: diff --git a/network/storage_v6.yaml b/network/storage_v6.yaml index 36a6fae8..5c8af9e5 100644 --- a/network/storage_v6.yaml +++ b/network/storage_v6.yaml @@ -62,6 +62,7 @@ resources: name: {get_param: StorageSubnetName} network: {get_resource: StorageNetwork} allocation_pools: {get_param: StorageAllocationPools} + gateway_ip: null outputs: OS::stack_id: diff --git a/network/tenant.yaml b/network/tenant.yaml index 6fe96121..1045b81b 100644 --- a/network/tenant.yaml +++ b/network/tenant.yaml @@ -55,6 +55,7 @@ resources: name: {get_param: TenantSubnetName} network: {get_resource: TenantNetwork} allocation_pools: {get_param: TenantAllocationPools} + gateway_ip: null outputs: OS::stack_id: diff --git a/network/tenant_v6.yaml b/network/tenant_v6.yaml index b653eaf7..bf758a50 100644 --- a/network/tenant_v6.yaml +++ b/network/tenant_v6.yaml @@ -62,6 +62,7 @@ resources: name: {get_param: TenantSubnetName} network: {get_resource: TenantNetwork} allocation_pools: {get_param: TenantAllocationPools} + gateway_ip: null outputs: OS::stack_id: diff --git a/overcloud-resource-registry-puppet.j2.yaml b/overcloud-resource-registry-puppet.j2.yaml index 5f09f522..c7f15105 100644 --- a/overcloud-resource-registry-puppet.j2.yaml +++ b/overcloud-resource-registry-puppet.j2.yaml @@ -1,17 +1,7 @@ resource_registry: - OS::TripleO::BlockStorage: puppet/cinder-storage.yaml - OS::TripleO::Compute: puppet/compute.yaml + OS::TripleO::SoftwareDeployment: OS::Heat::StructuredDeployment - OS::TripleO::Controller: puppet/controller.yaml - OS::TripleO::ObjectStorage: puppet/swift-storage.yaml - OS::TripleO::CephStorage: puppet/ceph-storage.yaml - # set to controller-config-pacemaker.yaml to enable pacemaker - OS::TripleO::ControllerConfig: puppet/controller-config.yaml OS::TripleO::PostDeploySteps: puppet/post.yaml - OS::TripleO::ComputeConfig: puppet/compute-config.yaml - OS::TripleO::BlockStorageConfig: puppet/blockstorage-config.yaml - OS::TripleO::ObjectStorageConfig: puppet/objectstorage-config.yaml - OS::TripleO::CephStorageConfig: puppet/cephstorage-config.yaml OS::TripleO::AllNodes::SoftwareConfig: puppet/all-nodes-config.yaml OS::TripleO::DefaultPasswords: default_passwords.yaml @@ -20,19 +10,28 @@ resource_registry: OS::TripleO::Tasks::PackageUpdate: extraconfig/tasks/yum_update.yaml {% for role in roles %} + OS::TripleO::{{role.name}}: puppet/{{role.name.lower()}}-role.yaml + OS::TripleO::{{role.name}}Config: puppet/{{role.name.lower()}}-config.yaml OS::TripleO::Tasks::{{role.name}}PreConfig: OS::Heat::None OS::TripleO::Tasks::{{role.name}}PostConfig: OS::Heat::None - OS::TripleO::{{role.name}}ExtraConfigPre: puppet/extraconfig/pre_deploy/default.yaml - # Port assignments for the {{role.name}} role + # Note we have to special-case ObjectStorage for backwards compatibility + {% if role.name != 'ObjectStorage' %} OS::TripleO::{{role.name}}::Ports::ExternalPort: network/ports/noop.yaml OS::TripleO::{{role.name}}::Ports::InternalApiPort: network/ports/noop.yaml OS::TripleO::{{role.name}}::Ports::StoragePort: network/ports/noop.yaml OS::TripleO::{{role.name}}::Ports::StorageMgmtPort: network/ports/noop.yaml OS::TripleO::{{role.name}}::Ports::TenantPort: network/ports/noop.yaml OS::TripleO::{{role.name}}::Ports::ManagementPort: network/ports/noop.yaml - + {% else %} + OS::TripleO::SwiftStorage::Ports::ExternalPort: network/ports/noop.yaml + OS::TripleO::SwiftStorage::Ports::InternalApiPort: network/ports/noop.yaml + OS::TripleO::SwiftStorage::Ports::StoragePort: network/ports/noop.yaml + OS::TripleO::SwiftStorage::Ports::StorageMgmtPort: network/ports/noop.yaml + OS::TripleO::SwiftStorage::Ports::TenantPort: network/ports/noop.yaml + OS::TripleO::SwiftStorage::Ports::ManagementPort: network/ports/noop.yaml + {% endif %} OS::TripleO::{{role.name}}::Net::SoftwareConfig: net-config-noop.yaml {% endfor %} @@ -109,6 +108,7 @@ resource_registry: OS::TripleO::Services::CinderBackup: OS::Heat::None OS::TripleO::Services::CinderScheduler: puppet/services/cinder-scheduler.yaml OS::TripleO::Services::CinderVolume: puppet/services/cinder-volume.yaml + OS::TripleO::Services::BlockStorageCinderVolume: puppet/services/cinder-volume.yaml OS::TripleO::Services::Core: OS::Heat::None OS::TripleO::Services::Keystone: puppet/services/keystone.yaml OS::TripleO::Services::GlanceApi: puppet/services/glance-api.yaml @@ -199,7 +199,7 @@ resource_registry: OS::TripleO::Services::NovaIronic: OS::Heat::None OS::TripleO::Services::TripleoPackages: puppet/services/tripleo-packages.yaml OS::TripleO::Services::TripleoFirewall: puppet/services/tripleo-firewall.yaml - OS::TripleO::Services::OpenDaylight: OS::Heat::None + OS::TripleO::Services::OpenDaylightApi: OS::Heat::None OS::TripleO::Services::OpenDaylightOvs: OS::Heat::None OS::TripleO::Services::SensuClient: OS::Heat::None diff --git a/overcloud.j2.yaml b/overcloud.j2.yaml index bd699f50..db1a78bf 100644 --- a/overcloud.j2.yaml +++ b/overcloud.j2.yaml @@ -245,6 +245,15 @@ resources: EnabledServices: {get_attr: [{{role.name}}ServiceChain, role_data, service_names]} ServiceNetMap: {get_attr: [ServiceNetMap, service_net_map_lower]} ServiceHostnameList: {get_attr: [{{role.name}}, hostname]} + NetworkHostnameMap: + # Note (shardy) this somewhat complex yaql may be replaced + # with a map_deep_merge function in ocata. It merges the + # list of maps, but appends to colliding lists so we can + # create a map of lists for all nodes for each network + yaql: + expression: dict($.data.where($ != null).flatten().selectMany($.items()).groupBy($[0], $[1], [$[0], $[1].flatten()])) + data: + - {get_attr: [{{role.name}}, hostname_map]} {{role.name}}: type: OS::Heat::ResourceGroup @@ -292,8 +301,6 @@ resources: services: {get_attr: [{{role.name}}ServiceChain, role_data, service_names]} ServiceNames: {get_attr: [{{role.name}}ServiceChain, role_data, service_names]} MonitoringSubscriptions: {get_attr: [{{role.name}}ServiceChain, role_data, monitoring_subscriptions]} - LoggingSources: {get_attr: [{{role.name}}ServiceChain, role_data, logging_sources]} - LoggingGroups: {get_attr: [{{role.name}}ServiceChain, role_data, logging_groups]} {% endfor %} allNodesConfig: @@ -316,6 +323,24 @@ resources: {% for role in roles %} - {get_attr: [{{role.name}}ServiceChain, role_data, service_names]} {% endfor %} + logging_groups: + yaql: + expression: > + $.data.groups.flatten() + data: + groups: +{% for role in roles %} + - {get_attr: [{{role.name}}ServiceChain, role_data, logging_groups]} +{% endfor %} + logging_sources: + yaql: + expression: > + $.data.sources.flatten() + data: + sources: +{% for role in roles %} + - {get_attr: [{{role.name}}ServiceChain, role_data, logging_sources]} +{% endfor %} controller_ips: {get_attr: [Controller, ip_address]} controller_names: {get_attr: [Controller, hostname]} service_ips: @@ -338,10 +363,16 @@ resources: {% for role in roles %} - {get_attr: [{{role.name}}IpListMap, service_hostnames]} {% endfor %} + short_service_node_names: + yaql: + expression: dict($.data.l.where($ != null).selectMany($.items()).groupBy($[0], $[1], [$[0], $[1].flatten()])) + data: + l: +{% for role in roles %} + - {get_attr: [{{role.name}}IpListMap, short_service_hostnames]} +{% endfor %} # FIXME(shardy): These require further work to move into service_ips memcache_node_ips: {get_attr: [ControllerIpListMap, net_ip_map, {get_attr: [ServiceNetMap, service_net_map, MemcachedNetwork]}]} - keystone_public_api_node_ips: {get_attr: [ControllerIpListMap, net_ip_map, {get_attr: [ServiceNetMap, service_net_map, KeystonePublicApiNetwork]}]} - keystone_admin_api_node_ips: {get_attr: [ControllerIpListMap, net_ip_map, {get_attr: [ServiceNetMap, service_net_map, KeystoneAdminApiNetwork]}]} NetVipMap: {get_attr: [VipMap, net_ip_map]} RedisVirtualIP: {get_attr: [RedisVirtualIP, ip_address]} ServiceNetMap: {get_attr: [ServiceNetMap, service_net_map_lower]} @@ -456,6 +487,10 @@ resources: UpdateWorkflow: type: OS::TripleO::Tasks::UpdateWorkflow + depends_on: +{% for role in roles %} + - {{role.name}}AllNodesDeployment +{% endfor %} properties: servers: {% for role in roles %} @@ -561,7 +596,36 @@ outputs: The content that should be appended to your /etc/hosts if you want to get hostname-based access to the deployed nodes (useful for testing without setting up a DNS). - value: {get_attr: [allNodesConfig, hosts_entries]} + value: + list_join: + - "\n" + - - {get_attr: [allNodesConfig, hosts_entries]} + - + - str_replace: + template: IP HOST + params: + IP: {get_attr: [VipMap, net_ip_map, external]} + HOST: {get_param: CloudName} + - str_replace: + template: IP HOST + params: + IP: {get_attr: [VipMap, net_ip_map, ctlplane]} + HOST: {get_param: CloudNameCtlplane} + - str_replace: + template: IP HOST + params: + IP: {get_attr: [VipMap, net_ip_map, internal_api]} + HOST: {get_param: CloudNameInternal} + - str_replace: + template: IP HOST + params: + IP: {get_attr: [VipMap, net_ip_map, storage]} + HOST: {get_param: CloudNameStorage} + - str_replace: + template: IP HOST + params: + IP: {get_attr: [VipMap, net_ip_map, storage_mgmt]} + HOST: {get_param: CloudNameStorageManagement} EnabledServices: description: The services enabled on each role value: diff --git a/puppet/all-nodes-config.yaml b/puppet/all-nodes-config.yaml index 48f37893..d64f70db 100644 --- a/puppet/all-nodes-config.yaml +++ b/puppet/all-nodes-config.yaml @@ -20,18 +20,20 @@ parameters: type: string controller_ips: type: comma_delimited_list + logging_groups: + type: json + logging_sources: + type: json service_ips: type: json service_node_names: type: json + short_service_node_names: + type: json controller_names: type: comma_delimited_list memcache_node_ips: type: comma_delimited_list - keystone_public_api_node_ips: - type: comma_delimited_list - keystone_admin_api_node_ips: - type: comma_delimited_list NetVipMap: type: json RedisVirtualIP: @@ -86,6 +88,8 @@ resources: all_nodes: mapped_data: map_merge: + - tripleo::profile::base::logging::fluentd::fluentd_sources: {get_param: logging_sources} + - tripleo::profile::base::logging::fluentd::fluentd_groups: {get_param: logging_groups} - enabled_services: {get_param: enabled_services} # This writes out a mapping of service_name_enabled: 'true' # For any services not enabled, hiera foo_enabled will @@ -129,6 +133,7 @@ resources: # provides a mapping of service_name_ips to a list of IPs - {get_param: service_ips} - {get_param: service_node_names} + - {get_param: short_service_node_names} - controller_node_ips: list_join: - ',' @@ -145,22 +150,6 @@ resources: list_join: - "]','inet6:[" - {get_param: memcache_node_ips} - keystone_public_api_node_ips: - str_replace: - template: "['SERVERS_LIST']" - params: - SERVERS_LIST: - list_join: - - "','" - - {get_param: keystone_public_api_node_ips} - keystone_admin_api_node_ips: - str_replace: - template: "['SERVERS_LIST']" - params: - SERVERS_LIST: - list_join: - - "','" - - {get_param: keystone_admin_api_node_ips} deploy_identifier: {get_param: DeployIdentifier} update_identifier: {get_param: UpdateIdentifier} diff --git a/puppet/blockstorage-config.yaml b/puppet/blockstorage-config.yaml deleted file mode 100644 index e455c4cb..00000000 --- a/puppet/blockstorage-config.yaml +++ /dev/null @@ -1,41 +0,0 @@ -heat_template_version: 2015-04-30 - -description: > - A software config which runs manifests/overcloud_volume.pp - -parameters: - ConfigDebug: - default: false - description: Whether to run config management (e.g. Puppet) in debug mode. - type: boolean - StepConfig: - type: string - description: Config manifests that will be used to step through the deployment. - default: '' - -resources: - - BlockStoragePuppetConfigImpl: - type: OS::Heat::SoftwareConfig - properties: - group: puppet - options: - enable_debug: {get_param: ConfigDebug} - enable_hiera: True - enable_facter: False - modulepath: /etc/puppet/modules:/opt/stack/puppet-modules:/usr/share/openstack-puppet/modules - inputs: - - name: step - type: Number - outputs: - - name: result - config: - list_join: - - '' - - - get_file: manifests/overcloud_volume.pp - - {get_param: StepConfig} - -outputs: - OS::stack_id: - description: The software config which runs overcloud_controller.pp - value: {get_resource: BlockStoragePuppetConfigImpl} diff --git a/puppet/cinder-storage.yaml b/puppet/blockstorage-role.yaml index a66ea08b..8b695fff 100644 --- a/puppet/cinder-storage.yaml +++ b/puppet/blockstorage-role.yaml @@ -96,12 +96,6 @@ parameters: type: string description: Command which will be run whenever configuration data changes default: os-refresh-config --timeout 14400 - LoggingSources: - type: json - default: [] - LoggingGroups: - type: comma_delimited_list - default: [] resources: BlockStorage: @@ -277,8 +271,6 @@ resources: volume: mapped_data: tripleo::packages::enable_upgrade: {get_input: enable_package_upgrade} - tripleo::profile::base::logging::fluentd::fluentd_sources: {get_param: LoggingSources} - tripleo::profile::base::logging::fluentd::fluentd_groups: {get_param: LoggingGroups} # Resource for site-specific injection of root certificate NodeTLSCAData: @@ -315,6 +307,51 @@ outputs: hostname: description: Hostname of the server value: {get_attr: [BlockStorage, name]} + hostname_map: + description: Mapping of network names to hostnames + value: + external: + list_join: + - '.' + - - {get_attr: [BlockStorage, name]} + - external + - {get_param: CloudDomain} + internal_api: + list_join: + - '.' + - - {get_attr: [BlockStorage, name]} + - internalapi + - {get_param: CloudDomain} + storage: + list_join: + - '.' + - - {get_attr: [BlockStorage, name]} + - storage + - {get_param: CloudDomain} + storage_mgmt: + list_join: + - '.' + - - {get_attr: [BlockStorage, name]} + - storagemgmt + - {get_param: CloudDomain} + tenant: + list_join: + - '.' + - - {get_attr: [BlockStorage, name]} + - tenant + - {get_param: CloudDomain} + management: + list_join: + - '.' + - - {get_attr: [BlockStorage, name]} + - management + - {get_param: CloudDomain} + ctlplane: + list_join: + - '.' + - - {get_attr: [BlockStorage, name]} + - ctlplane + - {get_param: CloudDomain} hosts_entry: value: str_replace: diff --git a/puppet/ceph-storage.yaml b/puppet/cephstorage-role.yaml index 03a53b00..55b26336 100644 --- a/puppet/ceph-storage.yaml +++ b/puppet/cephstorage-role.yaml @@ -102,12 +102,6 @@ parameters: type: string description: Command which will be run whenever configuration data changes default: os-refresh-config --timeout 14400 - LoggingSources: - type: json - default: [] - LoggingGroups: - type: comma_delimited_list - default: [] resources: CephStorage: @@ -281,8 +275,6 @@ resources: ceph: mapped_data: tripleo::packages::enable_upgrade: {get_input: enable_package_upgrade} - tripleo::profile::base::logging::fluentd::fluentd_sources: {get_param: LoggingSources} - tripleo::profile::base::logging::fluentd::fluentd_groups: {get_param: LoggingGroups} # Resource for site-specific injection of root certificate NodeTLSCAData: @@ -325,6 +317,51 @@ outputs: hostname: description: Hostname of the server value: {get_attr: [CephStorage, name]} + hostname_map: + description: Mapping of network names to hostnames + value: + external: + list_join: + - '.' + - - {get_attr: [CephStorage, name]} + - external + - {get_param: CloudDomain} + internal_api: + list_join: + - '.' + - - {get_attr: [CephStorage, name]} + - internalapi + - {get_param: CloudDomain} + storage: + list_join: + - '.' + - - {get_attr: [CephStorage, name]} + - storage + - {get_param: CloudDomain} + storage_mgmt: + list_join: + - '.' + - - {get_attr: [CephStorage, name]} + - storagemgmt + - {get_param: CloudDomain} + tenant: + list_join: + - '.' + - - {get_attr: [CephStorage, name]} + - tenant + - {get_param: CloudDomain} + management: + list_join: + - '.' + - - {get_attr: [CephStorage, name]} + - management + - {get_param: CloudDomain} + ctlplane: + list_join: + - '.' + - - {get_attr: [CephStorage, name]} + - ctlplane + - {get_param: CloudDomain} hosts_entry: value: str_replace: diff --git a/puppet/compute-config.yaml b/puppet/compute-config.yaml deleted file mode 100644 index 2314c47d..00000000 --- a/puppet/compute-config.yaml +++ /dev/null @@ -1,41 +0,0 @@ -heat_template_version: 2015-04-30 - -description: > - A software config which runs manifests/overcloud_compute.pp - -parameters: - ConfigDebug: - default: false - description: Whether to run config management (e.g. Puppet) in debug mode. - type: boolean - StepConfig: - type: string - description: Config manifests that will be used to step through the deployment. - default: '' - -resources: - - ComputePuppetConfigImpl: - type: OS::Heat::SoftwareConfig - properties: - group: puppet - options: - enable_debug: {get_param: ConfigDebug} - enable_hiera: True - enable_facter: False - modulepath: /etc/puppet/modules:/opt/stack/puppet-modules:/usr/share/openstack-puppet/modules - inputs: - - name: step - type: Number - outputs: - - name: result - config: - list_join: - - '' - - - get_file: manifests/overcloud_compute.pp - - {get_param: StepConfig} - -outputs: - OS::stack_id: - description: The software config which runs overcloud_controller.pp - value: {get_resource: ComputePuppetConfigImpl} diff --git a/puppet/compute.yaml b/puppet/compute-role.yaml index 0205d0a6..4d77d6d3 100644 --- a/puppet/compute.yaml +++ b/puppet/compute-role.yaml @@ -114,12 +114,6 @@ parameters: type: string description: Command which will be run whenever configuration data changes default: os-refresh-config --timeout 14400 - LoggingSources: - type: json - default: [] - LoggingGroups: - type: comma_delimited_list - default: [] resources: @@ -295,8 +289,6 @@ resources: compute: mapped_data: tripleo::packages::enable_upgrade: {get_input: enable_package_upgrade} - tripleo::profile::base::logging::fluentd::fluentd_sources: {get_param: LoggingSources} - tripleo::profile::base::logging::fluentd::fluentd_groups: {get_param: LoggingGroups} NovaComputeDeployment: type: OS::TripleO::SoftwareDeployment @@ -368,6 +360,51 @@ outputs: hostname: description: Hostname of the server value: {get_attr: [NovaCompute, name]} + hostname_map: + description: Mapping of network names to hostnames + value: + external: + list_join: + - '.' + - - {get_attr: [NovaCompute, name]} + - external + - {get_param: CloudDomain} + internal_api: + list_join: + - '.' + - - {get_attr: [NovaCompute, name]} + - internalapi + - {get_param: CloudDomain} + storage: + list_join: + - '.' + - - {get_attr: [NovaCompute, name]} + - storage + - {get_param: CloudDomain} + storage_mgmt: + list_join: + - '.' + - - {get_attr: [NovaCompute, name]} + - storagemgmt + - {get_param: CloudDomain} + tenant: + list_join: + - '.' + - - {get_attr: [NovaCompute, name]} + - tenant + - {get_param: CloudDomain} + management: + list_join: + - '.' + - - {get_attr: [NovaCompute, name]} + - management + - {get_param: CloudDomain} + ctlplane: + list_join: + - '.' + - - {get_attr: [NovaCompute, name]} + - ctlplane + - {get_param: CloudDomain} hosts_entry: description: > Server's IP address and hostname in the /etc/hosts format diff --git a/puppet/cephstorage-config.yaml b/puppet/config.role.j2.yaml index 3f428609..e59a0216 100644 --- a/puppet/cephstorage-config.yaml +++ b/puppet/config.role.j2.yaml @@ -1,7 +1,7 @@ heat_template_version: 2015-04-30 description: > - A software config which runs manifests/overcloud_cephstorage.pp + A software config which runs puppet on the {{role}} role parameters: ConfigDebug: @@ -15,7 +15,7 @@ parameters: resources: - CephStoragePuppetConfigImpl: + {{role}}PuppetConfigImpl: type: OS::Heat::SoftwareConfig properties: group: puppet @@ -24,18 +24,21 @@ resources: enable_hiera: True enable_facter: False modulepath: /etc/puppet/modules:/opt/stack/puppet-modules:/usr/share/openstack-puppet/modules + outputs: + - name: result inputs: - name: step type: Number - outputs: - - name: result config: list_join: - '' - - - get_file: manifests/overcloud_cephstorage.pp + - - str_replace: + template: {get_file: manifests/overcloud_role.pp} + params: + __ROLE__: {{role.lower()}} - {get_param: StepConfig} outputs: OS::stack_id: - description: The software config which runs overcloud_controller.pp - value: {get_resource: CephStoragePuppetConfigImpl} + description: The software config which runs puppet on the {{role}} role + value: {get_resource: {{role}}PuppetConfigImpl} diff --git a/puppet/controller-config-pacemaker.yaml b/puppet/controller-config-pacemaker.yaml index b313f5de..24f31dc8 100644 --- a/puppet/controller-config-pacemaker.yaml +++ b/puppet/controller-config-pacemaker.yaml @@ -26,6 +26,9 @@ resources: modulepath: /etc/puppet/modules:/opt/stack/puppet-modules:/usr/share/openstack-puppet/modules outputs: - name: result + inputs: + - name: step + type: Number config: list_join: - '' diff --git a/puppet/controller-config.yaml b/puppet/controller-config.yaml deleted file mode 100644 index 99c7b26e..00000000 --- a/puppet/controller-config.yaml +++ /dev/null @@ -1,41 +0,0 @@ -heat_template_version: 2015-04-30 - -description: > - A software config which runs manifests/overcloud_controller.pp - -parameters: - ConfigDebug: - default: false - description: Whether to run config management (e.g. Puppet) in debug mode. - type: boolean - StepConfig: - type: string - description: Config manifests that will be used to step through the deployment. - default: '' - -resources: - - ControllerPuppetConfigImpl: - type: OS::Heat::SoftwareConfig - properties: - group: puppet - options: - enable_debug: {get_param: ConfigDebug} - enable_hiera: True - enable_facter: False - modulepath: /etc/puppet/modules:/opt/stack/puppet-modules:/usr/share/openstack-puppet/modules - outputs: - - name: result - inputs: - - name: step - type: Number - config: - list_join: - - '' - - - get_file: manifests/overcloud_controller.pp - - {get_param: StepConfig} - -outputs: - OS::stack_id: - description: The software config which runs overcloud_controller.pp - value: {get_resource: ControllerPuppetConfigImpl} diff --git a/puppet/controller.yaml b/puppet/controller-role.yaml index ccb517f8..b1433b04 100644 --- a/puppet/controller.yaml +++ b/puppet/controller-role.yaml @@ -128,12 +128,6 @@ parameters: type: string description: Command which will be run whenever configuration data changes default: os-refresh-config --timeout 14400 - LoggingSources: - type: json - default: [] - LoggingGroups: - type: comma_delimited_list - default: [] parameter_groups: - label: deprecated @@ -355,8 +349,6 @@ resources: # Misc tripleo::haproxy::service_certificate: {get_attr: [NodeTLSData, deployed_ssl_certificate_path]} tripleo::packages::enable_upgrade: {get_input: enable_package_upgrade} - tripleo::profile::base::logging::fluentd::fluentd_sources: {get_param: LoggingSources} - tripleo::profile::base::logging::fluentd::fluentd_groups: {get_param: LoggingGroups} # Hook for site-specific additional pre-deployment config, e.g extra hieradata ControllerExtraConfigPre: @@ -411,6 +403,51 @@ outputs: hostname: description: Hostname of the server value: {get_attr: [Controller, name]} + hostname_map: + description: Mapping of network names to hostnames + value: + external: + list_join: + - '.' + - - {get_attr: [Controller, name]} + - external + - {get_param: CloudDomain} + internal_api: + list_join: + - '.' + - - {get_attr: [Controller, name]} + - internalapi + - {get_param: CloudDomain} + storage: + list_join: + - '.' + - - {get_attr: [Controller, name]} + - storage + - {get_param: CloudDomain} + storage_mgmt: + list_join: + - '.' + - - {get_attr: [Controller, name]} + - storagemgmt + - {get_param: CloudDomain} + tenant: + list_join: + - '.' + - - {get_attr: [Controller, name]} + - tenant + - {get_param: CloudDomain} + management: + list_join: + - '.' + - - {get_attr: [Controller, name]} + - management + - {get_param: CloudDomain} + ctlplane: + list_join: + - '.' + - - {get_attr: [Controller, name]} + - ctlplane + - {get_param: CloudDomain} hosts_entry: description: > Server's IP address and hostname in the /etc/hosts format diff --git a/puppet/extraconfig/pre_deploy/controller/cinder-netapp.yaml b/puppet/extraconfig/pre_deploy/controller/cinder-netapp.yaml index 6ff90881..48446e5a 100644 --- a/puppet/extraconfig/pre_deploy/controller/cinder-netapp.yaml +++ b/puppet/extraconfig/pre_deploy/controller/cinder-netapp.yaml @@ -70,12 +70,22 @@ parameters: CinderNetappStoragePools: type: string default: '' - CinderNetappEseriesHostType: + CinderNetappHostType: type: string - default: 'linux_dm_mp' + default: '' CinderNetappWebservicePath: type: string default: '/devmgr/v2' + # DEPRECATED options for compatibility with older versions + CinderNetappEseriesHostType: + type: string + default: 'linux_dm_mp' + +parameter_groups: +- label: deprecated + description: Do not use deprecated params, they will be removed. + parameters: + - CinderNetappEseriesHostType resources: CinderNetappConfig: @@ -108,7 +118,7 @@ resources: cinder::backend::netapp::netapp_controller_ips: {get_input: NetappControllerIps} cinder::backend::netapp::netapp_sa_password: {get_input: NetappSaPassword} cinder::backend::netapp::netapp_storage_pools: {get_input: NetappStoragePools} - cinder::backend::netapp::netapp_eseries_host_type: {get_input: NetappEseriesHostType} + cinder::backend::netapp::netapp_host_type: {get_input: NetappHostType} cinder::backend::netapp::netapp_webservice_path: {get_input: NetappWebservicePath} CinderNetappDeployment: @@ -139,7 +149,7 @@ resources: NetappControllerIps: {get_param: CinderNetappControllerIps} NetappSaPassword: {get_param: CinderNetappSaPassword} NetappStoragePools: {get_param: CinderNetappStoragePools} - NetappEseriesHostType: {get_param: CinderNetappEseriesHostType} + NetappHostType: {get_param: CinderNetappHostType} NetappWebservicePath: {get_param: CinderNetappWebservicePath} outputs: diff --git a/puppet/extraconfig/tls/tls-cert-inject.yaml b/puppet/extraconfig/tls/tls-cert-inject.yaml index e281ef51..49d84574 100644 --- a/puppet/extraconfig/tls/tls-cert-inject.yaml +++ b/puppet/extraconfig/tls/tls-cert-inject.yaml @@ -64,11 +64,9 @@ resources: | openssl md5 | cut -c 10- \ > ${heat_outputs_path}.key_modulus # We need to reload haproxy in case the certificate changed because - # puppet doesn't know the contents of the cert file. The pacemaker - # case is handled separately in a pacemaker-specific resource. - pacemaker_status=$(systemctl is-active pacemaker) + # puppet doesn't know the contents of the cert file. haproxy_status=$(systemctl is-active haproxy) - if [ "$pacemaker_status" != "active" -a "$haproxy_status" = "active"]; then + if [ "$haproxy_status" = "active" ]; then systemctl reload haproxy fi diff --git a/puppet/manifests/overcloud_cephstorage.pp b/puppet/manifests/overcloud_cephstorage.pp deleted file mode 100644 index 2653badf..00000000 --- a/puppet/manifests/overcloud_cephstorage.pp +++ /dev/null @@ -1,21 +0,0 @@ -# Copyright 2015 Red Hat, Inc. -# All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. - -if hiera('step') >= 4 { - hiera_include('ceph_classes', []) -} - -$package_manifest_name = join(['/var/lib/tripleo/installed-packages/overcloud_ceph', hiera('step')]) -package_manifest{$package_manifest_name: ensure => present} diff --git a/puppet/manifests/overcloud_compute.pp b/puppet/manifests/overcloud_compute.pp deleted file mode 100644 index f96c193c..00000000 --- a/puppet/manifests/overcloud_compute.pp +++ /dev/null @@ -1,21 +0,0 @@ -# Copyright 2014 Red Hat, Inc. -# All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. - -if hiera('step') >= 4 { - hiera_include('compute_classes', []) -} - -$package_manifest_name = join(['/var/lib/tripleo/installed-packages/overcloud_compute', hiera('step')]) -package_manifest{$package_manifest_name: ensure => present} diff --git a/puppet/manifests/overcloud_object.pp b/puppet/manifests/overcloud_object.pp deleted file mode 100644 index 414a06ba..00000000 --- a/puppet/manifests/overcloud_object.pp +++ /dev/null @@ -1,21 +0,0 @@ -# Copyright 2015 Red Hat, Inc. -# All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. - -if hiera('step') >= 4 { - hiera_include('object_classes', []) -} - -$package_manifest_name = join(['/var/lib/tripleo/installed-packages/overcloud_object', hiera('step')]) -package_manifest{$package_manifest_name: ensure => present} diff --git a/puppet/manifests/overcloud_controller.pp b/puppet/manifests/overcloud_role.pp index 25bdbfb2..1a59620c 100644 --- a/puppet/manifests/overcloud_controller.pp +++ b/puppet/manifests/overcloud_role.pp @@ -13,9 +13,14 @@ # License for the specific language governing permissions and limitations # under the License. +# The content of this file will be used to generate +# the puppet manifests for all roles, the placeholder +# __ROLE__ will be replaced by 'controller', 'blockstorage', +# 'cephstorage' and all the deployed roles. + if hiera('step') >= 4 { - hiera_include('controller_classes', []) + hiera_include('__ROLE___classes', []) } -$package_manifest_name = join(['/var/lib/tripleo/installed-packages/overcloud_controller', hiera('step')]) +$package_manifest_name = join(['/var/lib/tripleo/installed-packages/overcloud___ROLE__', hiera('step')]) package_manifest{$package_manifest_name: ensure => present} diff --git a/puppet/manifests/overcloud_volume.pp b/puppet/manifests/overcloud_volume.pp deleted file mode 100644 index e1cdadd5..00000000 --- a/puppet/manifests/overcloud_volume.pp +++ /dev/null @@ -1,21 +0,0 @@ -# Copyright 2015 Red Hat, Inc. -# All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); you may -# not use this file except in compliance with the License. You may obtain -# a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, WITHOUT -# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the -# License for the specific language governing permissions and limitations -# under the License. - -if hiera('step') >= 4 { - hiera_include('volume_classes', []) -} - -$package_manifest_name = join(['/var/lib/tripleo/installed-packages/overcloud_volume', hiera('step')]) -package_manifest{$package_manifest_name: ensure => present} diff --git a/puppet/objectstorage-config.yaml b/puppet/objectstorage-config.yaml deleted file mode 100644 index 33480544..00000000 --- a/puppet/objectstorage-config.yaml +++ /dev/null @@ -1,41 +0,0 @@ -heat_template_version: 2015-04-30 - -description: > - A software config which runs manifests/overcloud_object.pp - -parameters: - ConfigDebug: - default: false - description: Whether to run config management (e.g. Puppet) in debug mode. - type: boolean - StepConfig: - type: string - description: Config manifests that will be used to step through the deployment. - default: '' - -resources: - - ObjectStoragePuppetConfigImpl: - type: OS::Heat::SoftwareConfig - properties: - group: puppet - options: - enable_debug: {get_param: ConfigDebug} - enable_hiera: True - enable_facter: False - modulepath: /etc/puppet/modules:/opt/stack/puppet-modules:/usr/share/openstack-puppet/modules - inputs: - - name: step - type: Number - outputs: - - name: result - config: - list_join: - - '' - - - get_file: manifests/overcloud_object.pp - - {get_param: StepConfig} - -outputs: - OS::stack_id: - description: The software config which runs overcloud_controller.pp - value: {get_resource: ObjectStoragePuppetConfigImpl} diff --git a/puppet/swift-storage.yaml b/puppet/objectstorage-role.yaml index 899ba66d..d7681d10 100644 --- a/puppet/swift-storage.yaml +++ b/puppet/objectstorage-role.yaml @@ -96,12 +96,6 @@ parameters: type: string description: Command which will be run whenever configuration data changes default: os-refresh-config --timeout 14400 - LoggingSources: - type: json - default: [] - LoggingGroups: - type: comma_delimited_list - default: [] resources: @@ -266,8 +260,6 @@ resources: object: mapped_data: # data supplied directly to this deployment configuration, etc tripleo::packages::enable_upgrade: {get_input: enable_package_upgrade} - tripleo::profile::base::logging::fluentd::fluentd_sources: {get_param: LoggingSources} - tripleo::profile::base::logging::fluentd::fluentd_groups: {get_param: LoggingGroups} SwiftStorageHieraDeploy: @@ -314,6 +306,51 @@ outputs: hostname: description: Hostname of the server value: {get_attr: [SwiftStorage, name]} + hostname_map: + description: Mapping of network names to hostnames + value: + external: + list_join: + - '.' + - - {get_attr: [SwiftStorage, name]} + - external + - {get_param: CloudDomain} + internal_api: + list_join: + - '.' + - - {get_attr: [SwiftStorage, name]} + - internalapi + - {get_param: CloudDomain} + storage: + list_join: + - '.' + - - {get_attr: [SwiftStorage, name]} + - storage + - {get_param: CloudDomain} + storage_mgmt: + list_join: + - '.' + - - {get_attr: [SwiftStorage, name]} + - storagemgmt + - {get_param: CloudDomain} + tenant: + list_join: + - '.' + - - {get_attr: [SwiftStorage, name]} + - tenant + - {get_param: CloudDomain} + management: + list_join: + - '.' + - - {get_attr: [SwiftStorage, name]} + - management + - {get_param: CloudDomain} + ctlplane: + list_join: + - '.' + - - {get_attr: [SwiftStorage, name]} + - ctlplane + - {get_param: CloudDomain} hosts_entry: value: str_replace: diff --git a/puppet/role.role.j2.yaml b/puppet/role.role.j2.yaml new file mode 100644 index 00000000..e4307001 --- /dev/null +++ b/puppet/role.role.j2.yaml @@ -0,0 +1,452 @@ +heat_template_version: 2016-10-14 +description: 'OpenStack {{role}} node configured by Puppet' +parameters: + Overcloud{{role}}Flavor: + description: Flavor for the {{role}} node. + default: baremetal + type: string + constraints: + - custom_constraint: nova.flavor + {{role}}Image: + type: string + default: overcloud-full + constraints: + - custom_constraint: glance.image + ImageUpdatePolicy: + default: 'REBUILD_PRESERVE_EPHEMERAL' + description: What policy to use when reconstructing instances. REBUILD for rebuilds, REBUILD_PRESERVE_EPHEMERAL to preserve /mnt. + type: string + KeyName: + description: Name of an existing Nova key pair to enable SSH access to the instances + type: string + default: default + constraints: + - custom_constraint: nova.keypair + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. + type: json + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + UpdateIdentifier: + default: '' + type: string + description: > + Setting to a previously unused value during stack-update will trigger + package update on all nodes + Hostname: + type: string + default: '' # Defaults to Heat created hostname + HostnameMap: + type: json + default: {} + description: Optional mapping to override hostnames + ExtraConfig: + default: {} + description: | + Additional hiera configuration to inject into the cluster. Note + that {{role}}ExtraConfig takes precedence over ExtraConfig. + type: json + {{role}}ExtraConfig: + default: {} + description: | + Role specific additional hiera configuration to inject into the cluster. + type: json + {{role}}IPs: + default: {} + type: json + NetworkDeploymentActions: + type: comma_delimited_list + description: > + Heat action when to apply network configuration changes + default: ['CREATE'] + SoftwareConfigTransport: + default: POLL_SERVER_CFN + description: | + How the server should receive the metadata required for software configuration. + type: string + constraints: + - allowed_values: [POLL_SERVER_CFN, POLL_SERVER_HEAT, POLL_TEMP_URL, ZAQAR_MESSAGE] + CloudDomain: + type: string + description: > + The DNS domain used for the hosts. This should match the dhcp_domain + configured in the Undercloud neutron. Defaults to localdomain. + ServerMetadata: + default: {} + description: > + Extra properties or metadata passed to Nova for the created nodes in + the overcloud. It's accessible via the Nova metadata API. + type: json + {{role}}SchedulerHints: + type: json + description: Optional scheduler hints to pass to nova + default: {} + NodeIndex: + type: number + default: 0 + ServiceConfigSettings: + type: json + default: {} + ServiceNames: + type: comma_delimited_list + default: [] + MonitoringSubscriptions: + type: comma_delimited_list + default: [] + ConfigCommand: + type: string + description: Command which will be run whenever configuration data changes + default: os-refresh-config --timeout 14400 + LoggingSources: + type: json + default: [] + LoggingGroups: + type: comma_delimited_list + default: [] + +resources: + {{role}}: + type: OS::TripleO::Server + metadata: + os-collect-config: + command: {get_param: ConfigCommand} + properties: + image: {get_param: {{role}}Image} + image_update_policy: {get_param: ImageUpdatePolicy} + flavor: {get_param: Overcloud{{role}}Flavor} + key_name: {get_param: KeyName} + networks: + - network: ctlplane + user_data_format: SOFTWARE_CONFIG + user_data: {get_resource: UserData} + name: + str_replace: + template: {get_param: Hostname} + params: {get_param: HostnameMap} + software_config_transport: {get_param: SoftwareConfigTransport} + metadata: {get_param: ServerMetadata} + scheduler_hints: {get_param: {{role}}SchedulerHints} + + # Combine the NodeAdminUserData and NodeUserData mime archives + UserData: + type: OS::Heat::MultipartMime + properties: + parts: + - config: {get_resource: NodeAdminUserData} + type: multipart + - config: {get_resource: NodeUserData} + type: multipart + + # Creates the "heat-admin" user if configured via the environment + # Should return a OS::Heat::MultipartMime reference via OS::stack_id + NodeAdminUserData: + type: OS::TripleO::NodeAdminUserData + + # For optional operator additional userdata + # Should return a OS::Heat::MultipartMime reference via OS::stack_id + NodeUserData: + type: OS::TripleO::NodeUserData + + ExternalPort: + type: OS::TripleO::{{role}}::Ports::ExternalPort + properties: + ControlPlaneIP: {get_attr: [{{role}}, networks, ctlplane, 0]} + IPPool: {get_param: {{role}}IPs} + NodeIndex: {get_param: NodeIndex} + + InternalApiPort: + type: OS::TripleO::{{role}}::Ports::InternalApiPort + properties: + ControlPlaneIP: {get_attr: [{{role}}, networks, ctlplane, 0]} + IPPool: {get_param: {{role}}IPs} + NodeIndex: {get_param: NodeIndex} + + StoragePort: + type: OS::TripleO::{{role}}::Ports::StoragePort + properties: + ControlPlaneIP: {get_attr: [{{role}}, networks, ctlplane, 0]} + IPPool: {get_param: {{role}}IPs} + NodeIndex: {get_param: NodeIndex} + + StorageMgmtPort: + type: OS::TripleO::{{role}}::Ports::StorageMgmtPort + properties: + ControlPlaneIP: {get_attr: [{{role}}, networks, ctlplane, 0]} + IPPool: {get_param: {{role}}IPs} + NodeIndex: {get_param: NodeIndex} + + TenantPort: + type: OS::TripleO::{{role}}::Ports::TenantPort + properties: + ControlPlaneIP: {get_attr: [{{role}}, networks, ctlplane, 0]} + IPPool: {get_param: {{role}}IPs} + NodeIndex: {get_param: NodeIndex} + + ManagementPort: + type: OS::TripleO::{{role}}::Ports::ManagementPort + properties: + ControlPlaneIP: {get_attr: [{{role}}, networks, ctlplane, 0]} + IPPool: {get_param: {{role}}IPs} + NodeIndex: {get_param: NodeIndex} + + NetworkConfig: + type: OS::TripleO::{{role}}::Net::SoftwareConfig + properties: + ControlPlaneIp: {get_attr: [{{role}}, networks, ctlplane, 0]} + ExternalIpSubnet: {get_attr: [ExternalPort, ip_subnet]} + InternalApiIpSubnet: {get_attr: [InternalApiPort, ip_subnet]} + StorageIpSubnet: {get_attr: [StoragePort, ip_subnet]} + StorageMgmtIpSubnet: {get_attr: [StorageMgmtPort, ip_subnet]} + TenantIpSubnet: {get_attr: [TenantPort, ip_subnet]} + ManagementIpSubnet: {get_attr: [ManagementPort, ip_subnet]} + + NetIpMap: + type: OS::TripleO::Network::Ports::NetIpMap + properties: + ControlPlaneIp: {get_attr: [{{role}}, networks, ctlplane, 0]} + ExternalIp: {get_attr: [ExternalPort, ip_address]} + ExternalIpSubnet: {get_attr: [ExternalPort, ip_subnet]} + ExternalIpUri: {get_attr: [ExternalPort, ip_address_uri]} + InternalApiIp: {get_attr: [InternalApiPort, ip_address]} + InternalApiIpSubnet: {get_attr: [InternalApiPort, ip_subnet]} + InternalApiIpUri: {get_attr: [InternalApiPort, ip_address_uri]} + StorageIp: {get_attr: [StoragePort, ip_address]} + StorageIpSubnet: {get_attr: [StoragePort, ip_subnet]} + StorageIpUri: {get_attr: [StoragePort, ip_address_uri]} + StorageMgmtIp: {get_attr: [StorageMgmtPort, ip_address]} + StorageMgmtIpSubnet: {get_attr: [StorageMgmtPort, ip_subnet]} + StorageMgmtIpUri: {get_attr: [StorageMgmtPort, ip_address_uri]} + TenantIp: {get_attr: [TenantPort, ip_address]} + TenantIpSubnet: {get_attr: [TenantPort, ip_subnet]} + TenantIpUri: {get_attr: [TenantPort, ip_address_uri]} + ManagementIp: {get_attr: [ManagementPort, ip_address]} + ManagementIpSubnet: {get_attr: [ManagementPort, ip_subnet]} + ManagementIpUri: {get_attr: [ManagementPort, ip_address_uri]} + + NetworkDeployment: + type: OS::TripleO::SoftwareDeployment + properties: + name: NetworkDeployment + config: {get_resource: NetworkConfig} + server: {get_resource: {{role}}} + actions: {get_param: NetworkDeploymentActions} + + {{role}}Deployment: + type: OS::Heat::StructuredDeployment + depends_on: NetworkDeployment + properties: + name: {{role}}Deployment + config: {get_resource: {{role}}Config} + server: {get_resource: {{role}}} + input_values: + enable_package_upgrade: {get_attr: [UpdateDeployment, update_managed_packages]} + + {{role}}Config: + type: OS::Heat::StructuredConfig + properties: + group: os-apply-config + config: + hiera: + hierarchy: + - '"%{::uuid}"' + - heat_config_%{::deploy_config_name} + - {{role.lower()}}_extraconfig + - extraconfig + - service_names + - service_configs + - bootstrap_node # provided by allNodesConfig + - all_nodes # provided by allNodesConfig + - vip_data # provided by allNodesConfig + - '"%{::osfamily}"' + merge_behavior: deeper + datafiles: + service_names: + mapped_data: + service_names: {get_param: ServiceNames} + sensu::subscriptions: {get_param: MonitoringSubscriptions} + service_configs: + mapped_data: + map_replace: + - {get_param: ServiceConfigSettings} + - values: {get_attr: [NetIpMap, net_ip_map]} + {{role.lower()}}_extraconfig: + mapped_data: {get_param: {{role}}ExtraConfig} + extraconfig: + mapped_data: {get_param: ExtraConfig} + {{role.lower()}}: + mapped_data: + tripleo::packages::enable_upgrade: {get_input: enable_package_upgrade} + tripleo::profile::base::logging::fluentd::fluentd_sources: {get_param: LoggingSources} + tripleo::profile::base::logging::fluentd::fluentd_groups: {get_param: LoggingGroups} + + # Resource for site-specific injection of root certificate + NodeTLSCAData: + depends_on: {{role}}Deployment + type: OS::TripleO::NodeTLSCAData + properties: + server: {get_resource: {{role}}} + + # Hook for site-specific additional pre-deployment config, e.g extra hieradata + {{role}}ExtraConfigPre: + depends_on: {{role}}Deployment + type: OS::TripleO::{{role}}ExtraConfigPre + properties: + server: {get_resource: {{role}}} + + # Hook for site-specific additional pre-deployment config, + # applying to all nodes, e.g node registration/unregistration + NodeExtraConfig: + depends_on: [{{role}}ExtraConfigPre, NodeTLSCAData] + type: OS::TripleO::NodeExtraConfig + properties: + server: {get_resource: {{role}}} + + UpdateConfig: + type: OS::TripleO::Tasks::PackageUpdate + + UpdateDeployment: + type: OS::Heat::SoftwareDeployment + properties: + config: {get_resource: UpdateConfig} + server: {get_resource: {{role}}} + input_values: + update_identifier: + get_param: UpdateIdentifier + +outputs: + ip_address: + description: IP address of the server in the ctlplane network + value: {get_attr: [{{role}}, networks, ctlplane, 0]} + hostname: + description: Hostname of the server + value: {get_attr: [{{role}}, name]} + hostname_map: + description: Mapping of network names to hostnames + value: + external: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - external + - {get_param: CloudDomain} + internal_api: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - internalapi + - {get_param: CloudDomain} + storage: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - storage + - {get_param: CloudDomain} + storage_mgmt: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - storagemgmt + - {get_param: CloudDomain} + tenant: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - tenant + - {get_param: CloudDomain} + management: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - management + - {get_param: CloudDomain} + ctlplane: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - ctlplane + - {get_param: CloudDomain} + hosts_entry: + value: + str_replace: + template: | + PRIMARYIP PRIMARYHOST.DOMAIN PRIMARYHOST + EXTERNALIP EXTERNALHOST.DOMAIN EXTERNALHOST + INTERNAL_APIIP INTERNAL_APIHOST.DOMAIN INTERNAL_APIHOST + STORAGEIP STORAGEHOST.DOMAIN STORAGEHOST + STORAGE_MGMTIP STORAGE_MGMTHOST.DOMAIN STORAGE_MGMTHOST + TENANTIP TENANTHOST.DOMAIN TENANTHOST + MANAGEMENTIP MANAGEMENTHOST.DOMAIN MANAGEMENTHOST + CTLPLANEIP CTLPLANEHOST.DOMAIN CTLPLANEHOST + params: + PRIMARYIP: {get_attr: [NetIpMap, net_ip_map, {get_param: [ServiceNetMap, {{role}}HostnameResolveNetwork]}]} + DOMAIN: {get_param: CloudDomain} + PRIMARYHOST: {get_attr: [{{role}}, name]} + EXTERNALIP: {get_attr: [ExternalPort, ip_address]} + EXTERNALHOST: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - external + INTERNAL_APIIP: {get_attr: [InternalApiPort, ip_address]} + INTERNAL_APIHOST: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - internalapi + STORAGEIP: {get_attr: [StoragePort, ip_address]} + STORAGEHOST: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - storage + STORAGE_MGMTIP: {get_attr: [StorageMgmtPort, ip_address]} + STORAGE_MGMTHOST: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - storagemgmt + TENANTIP: {get_attr: [TenantPort, ip_address]} + TENANTHOST: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - tenant + MANAGEMENTIP: {get_attr: [ManagementPort, ip_address]} + MANAGEMENTHOST: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - management + CTLPLANEIP: {get_attr: [{{role}}, networks, ctlplane, 0]} + CTLPLANEHOST: + list_join: + - '.' + - - {get_attr: [{{role}}, name]} + - ctlplane + nova_server_resource: + description: Heat resource handle for {{role}} server + value: + {get_resource: {{role}}} + external_ip_address: + description: IP address of the server in the external network + value: {get_attr: [ExternalPort, ip_address]} + internal_api_ip_address: + description: IP address of the server in the internal_api network + value: {get_attr: [InternalApiPort, ip_address]} + storage_ip_address: + description: IP address of the server in the storage network + value: {get_attr: [StoragePort, ip_address]} + storage_mgmt_ip_address: + description: IP address of the server in the storage_mgmt network + value: {get_attr: [StorageMgmtPort, ip_address]} + tenant_ip_address: + description: IP address of the server in the tenant network + value: {get_attr: [TenantPort, ip_address]} + management_ip_address: + description: IP address of the server in the management network + value: {get_attr: [ManagementPort, ip_address]} diff --git a/puppet/services/aodh-base.yaml b/puppet/services/aodh-base.yaml index 950e9026..0e2410f7 100644 --- a/puppet/services/aodh-base.yaml +++ b/puppet/services/aodh-base.yaml @@ -59,14 +59,7 @@ outputs: value: service_name: aodh_base config_settings: - aodh::evaluator::coordination_url: - list_join: - - '' - - - 'redis://:' - - {get_param: RedisPassword} - - '@' - - "%{hiera('redis_vip')}" - - ':6379/' + aodh_redis_password: {get_param: RedisPassword} aodh::db::database_connection: list_join: - '' diff --git a/puppet/services/ceilometer-agent-central.yaml b/puppet/services/ceilometer-agent-central.yaml index 2ae46d0e..c4abc307 100644 --- a/puppet/services/ceilometer-agent-central.yaml +++ b/puppet/services/ceilometer-agent-central.yaml @@ -51,13 +51,6 @@ outputs: config_settings: map_merge: - get_attr: [CeilometerServiceBase, role_data, config_settings] - - ceilometer::agent::central::coordination_url: - list_join: - - '' - - - 'redis://:' - - {get_param: RedisPassword} - - '@' - - "%{hiera('redis_vip')}" - - ':6379/' + - ceilometer_redis_password: {get_param: RedisPassword} step_config: | include ::tripleo::profile::base::ceilometer::agent::central diff --git a/puppet/services/ceph-base.yaml b/puppet/services/ceph-base.yaml index ce8d9158..adb17b26 100644 --- a/puppet/services/ceph-base.yaml +++ b/puppet/services/ceph-base.yaml @@ -75,6 +75,12 @@ outputs: ceph::profile::params::manage_repo: false ceph::profile::params::authentication_type: cephx ceph::profile::params::fsid: {get_param: CephClusterFSID} + # FIXME(gfidente): we should not have to list the packages explicitly in the templates, + # but this has to stay until https://bugs.launchpad.net/puppet-ceph/+bug/1629933 is fixed + ceph::params::packages: + - ceph-base + - ceph-mon + - ceph-osd # NOTE: bind IP is found in Heat replacing the network name with the local node IP # for the given network; replacement examples (eg. for internal_api): # internal_api -> IP diff --git a/puppet/services/cinder-base.yaml b/puppet/services/cinder-base.yaml index 93ab1d79..59c9b844 100644 --- a/puppet/services/cinder-base.yaml +++ b/puppet/services/cinder-base.yaml @@ -66,7 +66,6 @@ outputs: cinder::rabbit_password: {get_param: RabbitPassword} cinder::rabbit_port: {get_param: RabbitClientPort} cinder::rabbit_heartbeat_timeout_threshold: 60 - cinder::host: hostgroup cinder::cron::db_purge::destination: '/dev/null' cinder::db::database_db_max_retries: -1 cinder::db::database_max_retries: -1 diff --git a/puppet/services/glance-api.yaml b/puppet/services/glance-api.yaml index 80ba9aef..33abdbf9 100644 --- a/puppet/services/glance-api.yaml +++ b/puppet/services/glance-api.yaml @@ -18,32 +18,14 @@ parameters: description: Mapping of service endpoint -> protocol. Typically set via parameter_defaults in the resource registry. type: json - CephClientUserName: - default: openstack - type: string Debug: default: '' description: Set to True to enable debugging on all services. type: string - GlanceNotifierStrategy: - description: Strategy to use for Glance notification queue - type: string - default: noop - GlanceLogFile: - description: The filepath of the file to use for logging messages from Glance. - type: string - default: '' GlancePassword: description: The password for the glance service and db account, used by the glance services. type: string hidden: true - GlanceBackend: - default: swift - description: The short name of the Glance backend to use. Should be one - of swift, rbd, or file - type: string - constraints: - - allowed_values: ['swift', 'file', 'rbd'] GlanceWorkers: default: '' description: | @@ -55,31 +37,6 @@ parameters: memory consumption. It is recommended that a suitable non-default value be selected on such systems. type: string - GlanceRbdPoolName: - default: images - type: string - RabbitPassword: - description: The password for RabbitMQ - type: string - hidden: true - RabbitUserName: - default: guest - description: The username for RabbitMQ - type: string - RabbitClientPort: - default: 5672 - description: Set rabbit subscriber port, change this if using SSL - type: number - RabbitClientUseSSL: - default: false - description: > - Rabbit client subscriber parameter to specify - an SSL connection to the RabbitMQ host. - type: string - KeystoneRegion: - type: string - default: 'regionOne' - description: Keystone region for endpoint MonitoringSubscriptionGlanceApi: default: 'overcloud-glance-api' type: string @@ -89,6 +46,14 @@ parameters: tag: openstack.glance.api path: /var/log/glance/api.log +resources: + GlanceBase: + type: ./glance-base.yaml + properties: + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + EndpointMap: {get_param: EndpointMap} + outputs: role_data: description: Role data for the Glance API role. @@ -99,65 +64,46 @@ outputs: logging_groups: - glance config_settings: - glance::api::database_connection: - list_join: - - '' - - - {get_param: [EndpointMap, MysqlInternal, protocol]} - - '://glance:' - - {get_param: GlancePassword} - - '@' - - {get_param: [EndpointMap, MysqlInternal, host]} - - '/glance' - glance::api::bind_port: {get_param: [EndpointMap, GlanceInternal, port]} - glance::api::authtoken::auth_uri: {get_param: [EndpointMap, KeystoneInternal, uri] } - glance::api::authtoken::auth_url: { get_param: [EndpointMap, KeystoneAdmin, uri_no_suffix] } - glance::api::registry_host: - str_replace: - template: "'REGISTRY_HOST'" - params: - REGISTRY_HOST: {get_param: [EndpointMap, GlanceRegistryInternal, host]} - glance::api::registry_client_protocol: {get_param: [EndpointMap, GlanceRegistryInternal, protocol] } - glance::api::authtoken::password: {get_param: GlancePassword} - glance::api::enable_proxy_headers_parsing: true - glance::api::debug: {get_param: Debug} - glance::api::workers: {get_param: GlanceWorkers} - glance_notifier_strategy: {get_param: GlanceNotifierStrategy} - glance_log_file: {get_param: GlanceLogFile} - glance::backend::swift::swift_store_auth_address: {get_param: [EndpointMap, KeystoneInternal, uri] } - glance::backend::swift::swift_store_user: service:glance - glance::backend::swift::swift_store_key: {get_param: GlancePassword} - glance::backend::swift::swift_store_create_container_on_put: true - glance::backend::rbd::rbd_store_pool: {get_param: GlanceRbdPoolName} - glance::backend::rbd::rbd_store_user: {get_param: CephClientUserName} - glance_backend: {get_param: GlanceBackend} - glance::notify::rabbitmq::rabbit_userid: {get_param: RabbitUserName} - glance::notify::rabbitmq::rabbit_port: {get_param: RabbitClientPort} - glance::notify::rabbitmq::rabbit_password: {get_param: RabbitPassword} - glance::notify::rabbitmq::rabbit_use_ssl: {get_param: RabbitClientUseSSL} - glance::registry::db::database_db_max_retries: -1 - glance::registry::db::database_max_retries: -1 - tripleo.glance_api.firewall_rules: - '112 glance_api': - dport: - - 9292 - - 13292 - glance::api::authtoken::project_name: 'service' - glance::api::pipeline: 'keystone' - glance::api::show_image_direct_url: true - # NOTE: bind IP is found in Heat replacing the network name with the - # local node IP for the given network; replacement examples - # (eg. for internal_api): - # internal_api -> IP - # internal_api_uri -> [IP] - # internal_api_subnet - > IP/CIDR - glance::api::bind_host: {get_param: [ServiceNetMap, GlanceApiNetwork]} + map_merge: + - get_attr: [GlanceBase, role_data, config_settings] + - glance::api::database_connection: + list_join: + - '' + - - {get_param: [EndpointMap, MysqlInternal, protocol]} + - '://glance:' + - {get_param: GlancePassword} + - '@' + - {get_param: [EndpointMap, MysqlInternal, host]} + - '/glance' + glance::api::bind_port: {get_param: [EndpointMap, GlanceInternal, port]} + glance::api::authtoken::auth_uri: {get_param: [EndpointMap, KeystoneInternal, uri] } + glance::api::authtoken::auth_url: { get_param: [EndpointMap, KeystoneAdmin, uri_no_suffix] } + glance::api::registry_host: + str_replace: + template: "'REGISTRY_HOST'" + params: + REGISTRY_HOST: {get_param: [EndpointMap, GlanceRegistryInternal, host]} + glance::api::registry_client_protocol: {get_param: [EndpointMap, GlanceRegistryInternal, protocol] } + glance::api::authtoken::password: {get_param: GlancePassword} + glance::api::enable_proxy_headers_parsing: true + glance::api::debug: {get_param: Debug} + glance::api::workers: {get_param: GlanceWorkers} + tripleo.glance_api.firewall_rules: + '112 glance_api': + dport: + - 9292 + - 13292 + glance::api::authtoken::project_name: 'service' + glance::api::pipeline: 'keystone' + glance::api::show_image_direct_url: true + # NOTE: bind IP is found in Heat replacing the network name with the + # local node IP for the given network; replacement examples + # (eg. for internal_api): + # internal_api -> IP + # internal_api_uri -> [IP] + # internal_api_subnet - > IP/CIDR + glance::api::bind_host: {get_param: [ServiceNetMap, GlanceApiNetwork]} step_config: | include ::tripleo::profile::base::glance::api service_config_settings: - keystone: - glance::keystone::auth::public_url: {get_param: [EndpointMap, GlancePublic, uri]} - glance::keystone::auth::internal_url: {get_param: [EndpointMap, GlanceInternal, uri]} - glance::keystone::auth::admin_url: {get_param: [EndpointMap, GlanceAdmin, uri]} - glance::keystone::auth::password: {get_param: GlancePassword } - glance::keystone::auth::region: {get_param: KeystoneRegion} - glance::keystone::auth::tenant: 'service' + get_attr: [GlanceBase, role_data, service_config_settings] diff --git a/puppet/services/glance-base.yaml b/puppet/services/glance-base.yaml new file mode 100644 index 00000000..3294fc0f --- /dev/null +++ b/puppet/services/glance-base.yaml @@ -0,0 +1,110 @@ +heat_template_version: 2016-10-14 + +description: > + OpenStack Glance Common settings with Puppet + +parameters: + ServiceNetMap: + default: {} + description: Mapping of service_name -> network name. Typically set + via parameter_defaults in the resource registry. This + mapping overrides those in ServiceNetMapDefaults. + type: json + DefaultPasswords: + default: {} + type: json + EndpointMap: + default: {} + description: Mapping of service endpoint -> protocol. Typically set + via parameter_defaults in the resource registry. + type: json + CephClientUserName: + default: openstack + type: string + Debug: + default: '' + description: Set to True to enable debugging on all services. + type: string + GlanceNotifierStrategy: + description: Strategy to use for Glance notification queue + type: string + default: noop + GlanceLogFile: + description: The filepath of the file to use for logging messages from Glance. + type: string + default: '' + GlancePassword: + description: The password for the glance service and db account, used by the glance services. + type: string + hidden: true + GlanceBackend: + default: swift + description: The short name of the Glance backend to use. Should be one + of swift, rbd, or file + type: string + constraints: + - allowed_values: ['swift', 'file', 'rbd'] + GlanceRbdPoolName: + default: images + type: string + RabbitPassword: + description: The password for RabbitMQ + type: string + hidden: true + RabbitUserName: + default: guest + description: The username for RabbitMQ + type: string + RabbitClientPort: + default: 5672 + description: Set rabbit subscriber port, change this if using SSL + type: number + RabbitClientUseSSL: + default: false + description: > + Rabbit client subscriber parameter to specify + an SSL connection to the RabbitMQ host. + type: string + KeystoneRegion: + type: string + default: 'regionOne' + description: Keystone region for endpoint + +outputs: + role_data: + description: Role data for the Glance common role. + value: + service_name: glance_base + config_settings: + glance_notifier_strategy: {get_param: GlanceNotifierStrategy} + glance_log_file: {get_param: GlanceLogFile} + glance::backend::swift::swift_store_auth_address: {get_param: [EndpointMap, KeystoneInternal, uri] } + glance::backend::swift::swift_store_user: service:glance + glance::backend::swift::swift_store_key: {get_param: GlancePassword} + glance::backend::swift::swift_store_create_container_on_put: true + glance::backend::rbd::rbd_store_pool: {get_param: GlanceRbdPoolName} + glance::backend::rbd::rbd_store_user: {get_param: CephClientUserName} + glance_backend: {get_param: GlanceBackend} + glance::notify::rabbitmq::rabbit_userid: {get_param: RabbitUserName} + glance::notify::rabbitmq::rabbit_port: {get_param: RabbitClientPort} + glance::notify::rabbitmq::rabbit_password: {get_param: RabbitPassword} + glance::notify::rabbitmq::rabbit_use_ssl: {get_param: RabbitClientUseSSL} + glance::notify::rabbitmq::notification_driver: messagingv2 + glance::registry::db::database_db_max_retries: -1 + glance::registry::db::database_max_retries: -1 + service_config_settings: + keystone: + glance::keystone::auth::public_url: {get_param: [EndpointMap, GlancePublic, uri]} + glance::keystone::auth::internal_url: {get_param: [EndpointMap, GlanceInternal, uri]} + glance::keystone::auth::admin_url: {get_param: [EndpointMap, GlanceAdmin, uri]} + glance::keystone::auth::password: {get_param: GlancePassword } + glance::keystone::auth::region: {get_param: KeystoneRegion} + glance::keystone::auth::tenant: 'service' + mysql: + glance::db::mysql::password: {get_param: GlancePassword} + glance::db::mysql::user: glance + glance::db::mysql::host: {get_param: [EndpointMap, MysqlInternal, host_nobrackets]} + glance::db::mysql::dbname: glance + glance::db::mysql::allowed_hosts: + - '%' + - "%{hiera('mysql_bind_host')}" diff --git a/puppet/services/glance-registry.yaml b/puppet/services/glance-registry.yaml index 30df67fe..c45582d4 100644 --- a/puppet/services/glance-registry.yaml +++ b/puppet/services/glance-registry.yaml @@ -46,6 +46,14 @@ parameters: tag: openstack.glance.registry path: /var/log/glance/registry.log +resources: + GlanceBase: + type: ./glance-base.yaml + properties: + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + EndpointMap: {get_param: EndpointMap} + outputs: role_data: description: Role data for the Glance Registry role. @@ -56,43 +64,37 @@ outputs: logging_groups: - glance config_settings: - glance::registry::database_connection: - list_join: - - '' - - - {get_param: [EndpointMap, MysqlInternal, protocol]} - - '://glance:' - - {get_param: GlancePassword} - - '@' - - {get_param: [EndpointMap, MysqlInternal, host]} - - '/glance' - glance::registry::authtoken::password: {get_param: GlancePassword} - glance::registry::authtoken::project_name: 'service' - glance::registry::pipeline: 'keystone' - glance::registry::authtoken::auth_uri: {get_param: [EndpointMap, KeystoneInternal, uri] } - glance::registry::authtoken::auth_url: { get_param: [EndpointMap, KeystoneAdmin, uri_no_suffix] } - glance::registry::debug: {get_param: Debug} - glance::registry::workers: {get_param: GlanceWorkers} - glance::registry::db::database_db_max_retries: -1 - glance::registry::db::database_max_retries: -1 - tripleo.glance_registry.firewall_rules: - '112 glance_registry': - dport: - - 9191 - # NOTE: bind IP is found in Heat replacing the network name with the - # local node IP for the given network; replacement examples - # (eg. for internal_api): - # internal_api -> IP - # internal_api_uri -> [IP] - # internal_api_subnet - > IP/CIDR - glance::registry::bind_host: {get_param: [ServiceNetMap, GlanceRegistryNetwork]} + map_merge: + - get_attr: [GlanceBase, role_data, config_settings] + + - glance::registry::database_connection: + list_join: + - '' + - - {get_param: [EndpointMap, MysqlInternal, protocol]} + - '://glance:' + - {get_param: GlancePassword} + - '@' + - {get_param: [EndpointMap, MysqlInternal, host]} + - '/glance' + glance::registry::authtoken::password: {get_param: GlancePassword} + glance::registry::authtoken::project_name: 'service' + glance::registry::pipeline: 'keystone' + glance::registry::authtoken::auth_uri: {get_param: [EndpointMap, KeystoneInternal, uri] } + glance::registry::authtoken::auth_url: { get_param: [EndpointMap, KeystoneAdmin, uri_no_suffix] } + glance::registry::debug: {get_param: Debug} + glance::registry::workers: {get_param: GlanceWorkers} + tripleo.glance_registry.firewall_rules: + '112 glance_registry': + dport: + - 9191 + # NOTE: bind IP is found in Heat replacing the network name with the + # local node IP for the given network; replacement examples + # (eg. for internal_api): + # internal_api -> IP + # internal_api_uri -> [IP] + # internal_api_subnet - > IP/CIDR + glance::registry::bind_host: {get_param: [ServiceNetMap, GlanceRegistryNetwork]} step_config: | include ::tripleo::profile::base::glance::registry service_config_settings: - mysql: - glance::db::mysql::password: {get_param: GlancePassword} - glance::db::mysql::user: glance - glance::db::mysql::host: {get_param: [EndpointMap, MysqlInternal, host_nobrackets]} - glance::db::mysql::dbname: glance - glance::db::mysql::allowed_hosts: - - '%' - - "%{hiera('mysql_bind_host')}" + get_attr: [GlanceBase, role_data, config_settings] diff --git a/puppet/services/gnocchi-base.yaml b/puppet/services/gnocchi-base.yaml index 73889363..556baae0 100644 --- a/puppet/services/gnocchi-base.yaml +++ b/puppet/services/gnocchi-base.yaml @@ -56,6 +56,7 @@ outputs: service_name: gnocchi_base config_settings: #Gnocchi engine + gnocchi_redis_password: {get_param: RedisPassword} gnocchi::debug: {get_param: Debug} gnocchi::db::database_connection: list_join: @@ -67,14 +68,6 @@ outputs: - {get_param: [EndpointMap, MysqlInternal, host]} - '/gnocchi' gnocchi::db::sync::extra_opts: '--skip-storage --create-legacy-resource-types' - gnocchi::storage::coordination_url: - list_join: - - '' - - - 'redis://:' - - {get_param: RedisPassword} - - '@' - - "%{hiera('redis_vip')}" - - ':6379/' gnocchi::storage::swift::swift_user: 'service:gnocchi' gnocchi::storage::swift::swift_auth_version: 2 gnocchi::storage::swift::swift_key: {get_param: GnocchiPassword} diff --git a/puppet/services/keepalived.yaml b/puppet/services/keepalived.yaml index 2b069d67..38cfbe22 100644 --- a/puppet/services/keepalived.yaml +++ b/puppet/services/keepalived.yaml @@ -41,5 +41,8 @@ outputs: config_settings: tripleo::keepalived::control_virtual_interface: {get_param: ControlVirtualInterface} tripleo::keepalived::public_virtual_interface: {get_param: PublicVirtualInterface} + tripleo.keepalived.firewall_rules: + '106 keepalived vrrp': + proto: vrrp step_config: | include ::tripleo::profile::base::keepalived diff --git a/puppet/services/kernel.yaml b/puppet/services/kernel.yaml index 2f01578e..1fc88bf1 100644 --- a/puppet/services/kernel.yaml +++ b/puppet/services/kernel.yaml @@ -39,8 +39,12 @@ outputs: net.netfilter.nf_conntrack_max: value: 500000 # prevent neutron bridges from autoconfiguring ipv6 addresses + net.ipv6.conf.all.accept_ra: + value: 0 net.ipv6.conf.default.accept_ra: value: 0 + net.ipv6.conf.all.autoconf: + value: 0 net.ipv6.conf.default.autoconf: value: 0 net.core.netdev_max_backlog: diff --git a/puppet/services/logging/fluentd-config.yaml b/puppet/services/logging/fluentd-config.yaml index e051781e..58b423fd 100644 --- a/puppet/services/logging/fluentd-config.yaml +++ b/puppet/services/logging/fluentd-config.yaml @@ -70,7 +70,7 @@ parameters: - tag_pattern: '**' type: record_transformer record: - nodename: '${hostname}' + host: '${hostname}' - tag_pattern: 'openstack.**' type: record_transformer diff --git a/puppet/services/manila-backend-cephfs.yaml b/puppet/services/manila-backend-cephfs.yaml index 89a36d21..0fc39e2a 100644 --- a/puppet/services/manila-backend-cephfs.yaml +++ b/puppet/services/manila-backend-cephfs.yaml @@ -19,9 +19,6 @@ parameters: via parameter_defaults in the resource registry. type: json # CephFS Native backend params: - ManilaCephFSNativeEnableBackend: - type: boolean - default: false ManilaCephFSNativeBackendName: type: string default: cephfsnative @@ -33,7 +30,7 @@ parameters: default: 'cephfs' ManilaCephFSNativeCephFSConfPath: type: string - default: '/etc/ceph/cephfs.conf' + default: '/etc/ceph/ceph.conf' ManilaCephFSNativeCephFSAuthId: type: string default: 'manila' @@ -50,7 +47,6 @@ outputs: value: service_name: manila_backend_cephfs config_settings: - manila::backend::cephfsnative::enable_backend: {get_param: ManilaCephFSNativeEnableBackend} manila::backend::cephfsnative::title: {get_param: ManilaCephFSNativeBackendName} manila::backend::cephfsnative::driver_handles_share_servers: {get_param: ManilaCephFSNativeDriverHandlesShareServers} manila::backend::cephfsnative::share_backend_name: {get_param: ManilaCephFSNativeShareBackendName} diff --git a/puppet/services/manila-backend-generic.yaml b/puppet/services/manila-backend-generic.yaml index 5c001c82..c527666e 100644 --- a/puppet/services/manila-backend-generic.yaml +++ b/puppet/services/manila-backend-generic.yaml @@ -4,9 +4,6 @@ description: > Openstack Manila generic backend. parameters: - ManilaGenericEnableBackend: - type: boolean - default: false ManilaGenericBackendName: type: string default: tripleo_generic @@ -73,7 +70,6 @@ outputs: value: service_name: manila_backend_generic config_settings: - manila_generic_enable_backend: {get_param: ManilaGenericEnableBackend} manila::backend::generic::title: {get_param: ManilaGenericBackendName} manila::backend::generic::driver_handles_share_servers: {get_param: ManilaGenericDriverHandlesShareServers} manila::backend::generic::smb_template_config_path: {get_param: ManilaGenericSmbTemplateConfigPath} diff --git a/puppet/services/manila-backend-netapp.yaml b/puppet/services/manila-backend-netapp.yaml index c95a8da7..e6d2f250 100644 --- a/puppet/services/manila-backend-netapp.yaml +++ b/puppet/services/manila-backend-netapp.yaml @@ -4,9 +4,6 @@ description: > Openstack Manila netapp backend. parameters: - ManilaNetappEnableBackend: - type: boolean - default: false ManilaNetappDriverHandlesShareServers: type: string default: true @@ -88,7 +85,6 @@ outputs: value: service_name: manila_backend_netapp config_settings: - manila_netapp_enable_backend: {get_param: ManilaNetappEnableBackend} manila::backend::netapp::title: {get_param: ManilaNetappBackendName} manila::backend::netapp::netapp_login: {get_param: ManilaNetappLogin} manila::backend::netapp::driver_handles_share_servers: {get_param: ManilaNetappDriverHandlesShareServers} diff --git a/puppet/services/neutron-api.yaml b/puppet/services/neutron-api.yaml index 3b531ab3..c2b6b6f7 100644 --- a/puppet/services/neutron-api.yaml +++ b/puppet/services/neutron-api.yaml @@ -145,16 +145,11 @@ outputs: neutron::server::notifications::password: {get_param: NovaPassword} neutron::keystone::authtoken::project_name: 'service' neutron::server::sync_db: true - tripleo.neutron_server.firewall_rules: - '114 neutron server': + tripleo.neutron_api.firewall_rules: + '114 neutron api': dport: - 9696 - 13696 - '118 neutron vxlan networks': - proto: 'udp' - dport: 4789 - '106 vrrp': - proto: vrrp neutron::server::router_distributed: {get_param: NeutronEnableDVR} # NOTE: bind IP is found in Heat replacing the network name with the local node IP # for the given network; replacement examples (eg. for internal_api): diff --git a/puppet/services/neutron-l3.yaml b/puppet/services/neutron-l3.yaml index 9e223374..a89e3d75 100644 --- a/puppet/services/neutron-l3.yaml +++ b/puppet/services/neutron-l3.yaml @@ -67,5 +67,8 @@ outputs: - neutron::agents::l3::external_network_bridge: {get_param: NeutronExternalNetworkBridge} neutron::agents::l3::router_delete_namespaces: True neutron::agents::l3::agent_mode : {get_param: NeutronL3AgentMode} + tripleo.neutron_l3.firewall_rules: + '106 neutron_l3 vrrp': + proto: vrrp step_config: | include tripleo::profile::base::neutron::l3 diff --git a/puppet/services/neutron-ovs-agent.yaml b/puppet/services/neutron-ovs-agent.yaml index cbe65638..cca0deee 100644 --- a/puppet/services/neutron-ovs-agent.yaml +++ b/puppet/services/neutron-ovs-agent.yaml @@ -117,5 +117,11 @@ outputs: # internal_api_subnet - > IP/CIDR neutron::agents::ml2::ovs::local_ip: {get_param: [ServiceNetMap, NeutronTenantNetwork]} neutron::agents::ml2::ovs::firewall_driver: {get_param: NeutronOVSFirewallDriver} + tripleo.neutron_ovs_agent.firewall_rules: + '118 neutron vxlan networks': + proto: 'udp' + dport: 4789 + '136 neutron gre networks': + proto: 'gre' step_config: | include ::tripleo::profile::base::neutron::ovs diff --git a/puppet/services/nova-api.yaml b/puppet/services/nova-api.yaml index b2ec0038..e1e1856d 100644 --- a/puppet/services/nova-api.yaml +++ b/puppet/services/nova-api.yaml @@ -53,6 +53,13 @@ parameters: path: /var/log/nova/nova-api.log resources: + ApacheServiceBase: + type: ./apache.yaml + properties: + ServiceNetMap: {get_param: ServiceNetMap} + DefaultPasswords: {get_param: DefaultPasswords} + EndpointMap: {get_param: EndpointMap} + NovaBase: type: ./nova-base.yaml properties: @@ -72,8 +79,8 @@ outputs: config_settings: map_merge: - get_attr: [NovaBase, role_data, config_settings] + - get_attr: [ApacheServiceBase, role_data, config_settings] - nova::api::osapi_compute_workers: {get_param: NovaWorkers} - nova::api::metadata_workers: {get_param: NovaWorkers} nova::cron::archive_deleted_rows::hour: '"*/12"' nova::cron::archive_deleted_rows::destination: '"/dev/null"' tripleo.nova_api.firewall_rules: @@ -100,7 +107,16 @@ outputs: # internal_api_uri -> [IP] # internal_api_subnet - > IP/CIDR nova::api::api_bind_address: {get_param: [ServiceNetMap, NovaApiNetwork]} - nova::api::metadata_listen: {get_param: [ServiceNetMap, NovaMetadataNetwork]} + nova::wsgi::apache::ssl: false + nova::wsgi::apache::bind_host: {get_param: [ServiceNetMap, NovaApiNetwork]} + nova::wsgi::apache::servername: + str_replace: + template: + '"%{::fqdn_$NETWORK}"' + params: + $NETWORK: {get_param: [ServiceNetMap, MysqlNetwork]} + nova::wsgi::apache::workers: {get_param: NovaWorkers} + nova::wsgi::apache::bind_host: {get_param: [ServiceNetMap, NovaApiNetwork]} nova::api::neutron_metadata_proxy_shared_secret: {get_param: NeutronMetadataProxySharedSecret} nova::api::instance_name_template: {get_param: InstanceNameTemplate} nova_enable_db_purge: {get_param: NovaEnableDBPurge} diff --git a/puppet/services/opendaylight-api.yaml b/puppet/services/opendaylight-api.yaml index d2ee036e..30351dfb 100644 --- a/puppet/services/opendaylight-api.yaml +++ b/puppet/services/opendaylight-api.yaml @@ -33,14 +33,6 @@ parameters: description: List of features to install with ODL type: comma_delimited_list default: ["odl-netvirt-openstack","odl-netvirt-ui"] - OpenDaylightConnectionProtocol: - description: L7 protocol used for REST access - type: string - default: 'http' - OpenDaylightCheckURL: - description: URL postfix to verify ODL has finished starting up - type: string - default: 'restconf/operational/network-topology:network-topology/topology/netvirt:1' OpenDaylightApiVirtualIP: type: string default: '' @@ -67,14 +59,11 @@ outputs: config_settings: opendaylight::odl_rest_port: {get_param: OpenDaylightPort} odl_on_controller: {get_param: EnableOpenDaylightOnController} - opendaylight_check_url: {get_param: OpenDaylightCheckURL} opendaylight::username: {get_param: OpenDaylightUsername} opendaylight::password: {get_param: OpenDaylightPassword} opendaylight::enable_l3: {get_param: OpenDaylightEnableL3} opendaylight::extra_features: {get_param: OpenDaylightFeatures} opendaylight::enable_dhcp: {get_param: OpenDaylightEnableDHCP} - opendaylight::nb_connection_protocol: {get_param: OpenDaylightConnectionProtocol} opendaylight::odl_bind_ip: {get_param: [ServiceNetMap, OpenDaylightApiNetwork]} step_config: | include tripleo::profile::base::neutron::opendaylight - include tripleo::profile::base::neutron::plugins::ovs::opendaylight diff --git a/puppet/services/pacemaker/cinder-volume.yaml b/puppet/services/pacemaker/cinder-volume.yaml index 11b9bf8f..d91a0181 100644 --- a/puppet/services/pacemaker/cinder-volume.yaml +++ b/puppet/services/pacemaker/cinder-volume.yaml @@ -41,5 +41,6 @@ outputs: - get_attr: [CinderVolumeBase, role_data, config_settings] - cinder::volume::manage_service: false cinder::volume::enabled: false + cinder::host: hostgroup step_config: include ::tripleo::profile::pacemaker::cinder::volume diff --git a/puppet/services/pacemaker/database/mongodb.yaml b/puppet/services/pacemaker/database/mongodb.yaml index 64ae2e91..982b6064 100644 --- a/puppet/services/pacemaker/database/mongodb.yaml +++ b/puppet/services/pacemaker/database/mongodb.yaml @@ -22,7 +22,7 @@ parameters: resources: MongoDbBase: - type: ../../database/mongodb-base.yaml + type: ../../database/mongodb.yaml properties: ServiceNetMap: {get_param: ServiceNetMap} DefaultPasswords: {get_param: DefaultPasswords} diff --git a/puppet/services/pacemaker/database/redis.yaml b/puppet/services/pacemaker/database/redis.yaml index d9156e67..196754eb 100644 --- a/puppet/services/pacemaker/database/redis.yaml +++ b/puppet/services/pacemaker/database/redis.yaml @@ -21,7 +21,7 @@ parameters: resources: RedisBase: - type: ../../database/redis-base.yaml + type: ../../database/redis.yaml properties: ServiceNetMap: {get_param: ServiceNetMap} DefaultPasswords: {get_param: DefaultPasswords} diff --git a/puppet/services/rabbitmq.yaml b/puppet/services/rabbitmq.yaml index 52300a2f..5387529d 100644 --- a/puppet/services/rabbitmq.yaml +++ b/puppet/services/rabbitmq.yaml @@ -38,6 +38,13 @@ parameters: type: string default: '' hidden: true + RabbitHAQueues: + description: + The number of HA queues to be configured in rabbit. The default is 0 which will + be automatically overridden to CEIL(N/2) where N is the number of nodes running + rabbitmq. + default: 0 + type: number MonitoringSubscriptionRabbitmq: default: 'overcloud-rabbitmq' type: string @@ -73,6 +80,7 @@ outputs: rabbitmq_config_variables: tcp_listen_options: '[binary, {packet, raw}, {reuseaddr, true}, {backlog, 128}, {nodelay, true}, {exit_on_close, false}, {keepalive, true}]' cluster_partition_handling: 'pause_minority' + queue_master_locator: '<<"min-masters">>' loopback_users: '[]' rabbitmq::erlang_cookie: yaql: @@ -88,5 +96,7 @@ outputs: # internal_api_uri -> [IP] # internal_api_subnet - > IP/CIDR rabbitmq::node_ip_address: {get_param: [ServiceNetMap, RabbitmqNetwork]} + rabbitmq::nr_ha_queues: {get_param: RabbitHAQueues} + step_config: | include ::tripleo::profile::base::rabbitmq diff --git a/puppet/services/services.yaml b/puppet/services/services.yaml index 7b5fa40c..176fd235 100644 --- a/puppet/services/services.yaml +++ b/puppet/services/services.yaml @@ -78,7 +78,7 @@ outputs: sources: - {get_attr: [LoggingConfiguration, LoggingDefaultSources]} - yaql: - expression: list($.data.where($ != null).select($.get('logging_sources')).where($ != null)) + expression: list($.data.where($ != null).select($.get('logging_source')).where($ != null)) data: {get_attr: [ServiceChain, role_data]} - {get_attr: [LoggingConfiguration, LoggingExtraSources]} default_format: {get_attr: [LoggingConfiguration, LoggingDefaultFormat]} diff --git a/puppet/services/tripleo-firewall.yaml b/puppet/services/tripleo-firewall.yaml index f6ec458f..7eb39905 100644 --- a/puppet/services/tripleo-firewall.yaml +++ b/puppet/services/tripleo-firewall.yaml @@ -19,7 +19,7 @@ parameters: via parameter_defaults in the resource registry. type: json ManageFirewall: - default: false + default: true description: Whether to manage IPtables rules. type: boolean PurgeFirewallRules: diff --git a/roles_data.yaml b/roles_data.yaml index fe98d827..86d0e4f5 100644 --- a/roles_data.yaml +++ b/roles_data.yaml @@ -90,7 +90,8 @@ - OS::TripleO::Services::NovaIronic - OS::TripleO::Services::TripleoPackages - OS::TripleO::Services::TripleoFirewall - - OS::TripleO::Services::OpenDaylight + - OS::TripleO::Services::OpenDaylightApi + - OS::TripleO::Services::OpenDaylightOvs - OS::TripleO::Services::SensuClient - OS::TripleO::Services::FluentdClient - OS::TripleO::Services::VipHosts @@ -124,7 +125,7 @@ - name: BlockStorage ServicesDefault: - OS::TripleO::Services::CACerts - - OS::TripleO::Services::CinderVolume + - OS::TripleO::Services::BlockStorageCinderVolume - OS::TripleO::Services::Kernel - OS::TripleO::Services::Ntp - OS::TripleO::Services::Timezone |