---
# The purpose of this file is to define network related paramters that are
# referenced (substituted) elsewhere in the manifests for this site.
#
schema: pegleg/CommonAddresses/v1
metadata:
  schema: metadata/Document/v1
  replacement: true
  name: common-addresses
  layeringDefinition:
    abstract: false
    layer: site
    parentSelector:
      name: common-addresses-global
    actions:
      - method: merge
        path: .
  storagePolicy: cleartext
data:
  calico:
    # NEWSITE-CHANGEME: The interface that Calico will use. Update if your
    # logical interface name or Calico VLAN have changed from the reference
    # site design.
    # This should be whichever interface (or bond) and VLAN number specified in
    # networks/physical/networks.yaml for the Calico network.
    # E.g. you would set "interface=ens785f0" as shown here.
    ip_autodetection_method: can-reach=10.10.152.21
    etcd:
      # The etcd service IP address.
      # This address must be within data.kubernetes.service_cidr range
      service_ip: 10.96.232.136
    ip_rule:
      # NEWSITE-CHANGEME: The service gateway/VRR IP for routing pod traffic
      gateway: 10.10.152.1

    bgp:
      # on the genesis node, run /opt/cni/bin/calicoctl get bgppeers
      # asnumber: 64688
      ipv4:
        # NEWSITE-CHANGEME: A routable CIDR to configure for ingress, maas, and
        # outward facing services (i.e. routable ingress CIDR)
        # public_service_cidr: 10.10.150.128/29
        public_service_cidr: 10.10.150.128/29
        # NEWSITE-CHANGEME: Update with the "public" facing VIP to assign to
        # the ingress controller. /32 is redundant; this is an IP not a CIDR.
        ingress_vip: 10.10.150.129/32
        # NEWSITE-CHANGEME(v1.0.1): Update with the "public" facing VIP to assign
        # the MAAS ingress controller. /32 is redundant; this is an IP not a CIDR.
        maas_vip: 10.10.151.129/32
        # NEWSITE-CHANGEME: In Network Cloud, there is a pair of "global" BGP
        # peers that will be used for the whole site (all racks). These BGP peer
        # IPs should be put into this list.
        # NOTE: Any change to the size of this list (2) requires corresponding
        # changes in calico.yaml
        peers:
          - 'Nonsense'
          - 'Nonsense'

  dns:
    # Kubernetes cluster domain. Do not change. This is internal to the cluster.
    cluster_domain: cluster.local
    # DNS service ip
    service_ip: 10.96.0.10
    # List of upstream DNS forwards. Verify you can reach them from your
    # environment. If so, you should not need to change them.
    upstream_servers:
      - 10.10.150.20
      - 10.10.151.20
    # Repeat the same values as above, but formatted as a common separated
    # string
    upstream_servers_joined: 10.10.150.20, 10.10.151.20

    # NEWSITE-CHANGEME: Set the FQDN used by bare metal nodes according to FQDN naming standards at
    node_domain: intel-pod15.opnfv.org

    # NEWSITE-CHANGEME: FQDN for ingress (i.e. "publicly facing" access point)
    # Choose FQDN according to the ingress/public FQDN naming conventions at
    # the top of this document.
    ingress_domain: intel-pod15.opnfv.org

  genesis:
    # NEWSITE-CHANGEME: Update with the hostname for the node which will take on
    # the Genesis role. Refer to the hostname naming stardards in
    # networks/physical/networks.yaml
    # NOTE: Ensure that the genesis node is manually configured with this
    # hostname before running `genesis.sh` on the node, see
    # https://airship-treasuremap.readthedocs.io/en/latest/authoring_and_deployment.html#genesis-node
    hostname: pod15-node1
    # NEWSITE-CHANGEME: Address defined for Calico network in
    # networks/physical/networks.yaml
    ip: 10.10.152.21
    # NEWSITE-CHANGEME: OOB IP of the Genesis node. This should be sourced from the
    # engineering package and match the address used to access the iLO/iDRAC/ASMI
    # interface for the Genesis node.
    oob: 10.10.150.11

  bootstrap:
    # NEWSITE-CHANGEME: Address defined for the Admin (PXE) network in
    # networks/physical/networks.yaml
    ip: 10.10.151.21

  kubernetes:
    # K8s API service IP
    api_service_ip: 10.96.0.1
    # etcd service IP
    etcd_service_ip: 10.96.0.2
    # k8s pod CIDR (network which pod traffic will traverse)
    pod_cidr: 10.97.0.0/16
    # k8s service CIDR (network which k8s API traffic will traverse)
    service_cidr: 10.96.0.0/16
    # misc k8s port settings
    apiserver_port: 6443
    haproxy_port: 6553
    service_node_port_range: 30000-32767

  # etcd port settings
  etcd:
    container_port: 2379
    haproxy_port: 2378

  # NEWSITE-CHANGEME: A list of nodes (excluding Genesis) which act as the
  # control plane servers. Ensure that this matches the nodes with the 'masters'
  # tags applied in baremetal/nodes.yaml
  masters:
    - hostname: pod15-node2
    - hostname: pod15-node3

  # NEWSITE-CHANGEME: Environment proxy information.
  # NOTE: Reference Airship sites do not deploy behind a proxy, so this proxy section
  # should be commented out.
  # However if you are in a lab that requires proxy, ensure that these proxy
  # settings are correct and reachable in your environment; otherwise update
  # them with the correct values for your environment.
  proxy:
    http: ""
    https: ""
    no_proxy: []

  node_ports:
    drydock_api: 30000
    maas_api: 30001

  ntp:
    # comma separated NTP server list. Verify that these upstream NTP servers are
    # reachable in your environment; otherwise update them with the correct
    # values for your environment.
    servers_joined: '0.ubuntu.pool.ntp.org,1.ubuntu.pool.ntp.org,2.ubuntu.pool.ntp.org,3.ubuntu.pool.ntp.org'

  # An example for Openstack Helm Infra LDAP
  ldap:
    # NEWSITE-CHANGEME: FQDN for LDAP. Update to the FQDN that is
    # relevant for your type of deployment (test vs prod values, etc).
    base_url: 'ldap.example.com'
    # NEWSITE-CHANGEME: As above, with the protocol included to create a full URI
    url: 'ldap://ldap.example.com'
    # NEWSITE-CHANGEME: Update to the correct expression relevant for this
    # deployment (test vs prod values, etc)
    auth_path: DC=test,DC=test,DC=com?sAMAccountName?sub?memberof=CN=test,OU=Application,OU=Groups,DC=test,DC=test,DC=com
    # NEWSITE-CHANGEME: Update to the correct AD group that contains the users
    # relevant for this deployment (test users vs prod users/values, etc)
    common_name: test
    # NEWSITE-CHANGEME: Update to the correct subdomain for your type of
    # deployment (test vs prod values, etc)
    subdomain: test
    # NEWSITE-CHANGEME: Update to the correct domain for your type of
    # deployment (test vs prod values, etc)
    domain: example

  ldap:
    # NEWSITE-CHANGEME: Replace with the site's LDAP account used to
    # authenticate to the active directory backend to validate keystone
    # users.
    # It is NOT used in the example deployment.
    username: "m12345@ldap.test.com"

  storage:
    ceph:
      # NEWSITE-CHANGEME: CIDRs for Ceph. Update to match the network CIDR
      # used for the Storage network in networks/physical/networks.yaml
      public_cidr: '10.10.153.0/24'
      cluster_cidr: '10.10.153.0/24'

  neutron:
    # NEWSITE-CHANGEME: Overlay network for VM traffic. Ensure the interface name and
    # VLAN number are consistent with what's defined for the Private network in
    # networks/physical/networks.yaml
    tunnel_device: 'ens785f0'
    # Interface for the OpenStack external network. Ensure the interface name is
    # consistent with the interface and VLAN assigned to the Public network in
    # networks/physical/networks.yaml
    external_iface: 'ens785f1.1153'

  openvswitch:
    # Interface for the OpenStack external network. Ensure the interface name is
    # consistent with the interface and VLAN assigned to the Public network in
    # networks/physical/networks.yaml
    external_iface: 'ens785f1.1153'
...