---
# Drydock BaremetalNode resources for a specific rack are stored in this file.
#
# NOTE: For new sites, you should complete the networks/physical/networks.yaml
# file before working on this file.
#
# In this file, you should make the number of `drydock/BaremetalNode/v1`
# resources equal the number of bare metal nodes you have, either by deleting
# excess BaremetalNode definitions (if there are too many), or by copying and
# pasting the last BaremetalNode in the file until you have the correct number
# of baremetal nodes (if there are too few).
#
# Then in each file, address all additional NEWSITE-CHANGEME markers to update
# the data in these files with the right values for your new site.
#
# *NOTE: The Genesis node is counted as one of the control plane nodes. Note
# that the Genesis node does not appear on this bare metal list, because the
# procedure to reprovision the Genesis host with MaaS has not yet been
# implemented. Therefore there will be only two bare metal nodes in this file
# with the 'masters' tag, as the genesis roles are assigned in a different
# place (type/cntt/profiles/genesis.yaml).
#
schema: 'drydock/BaremetalNode/v1'
metadata:
  schema: 'metadata/Document/v1'
  # NEWSITE-CHANGEME: Replace with the hostname of the first node in the rack,
  # after (excluding) genesis.
  name: pod15-node2
  layeringDefinition:
    abstract: false
    layer: site
  storagePolicy: cleartext
data:
  # NEWSITE-CHANGEME: The IPv4 address assigned to each logical network on this
  # node. In the reference Airship deployment, this is all logical Networks defined
  # in networks/physical/networks.yaml. IP addresses are manually assigned, by-hand.
  # (what could possibly go wrong!) The instructions differ for each logical
  # network, which are laid out below.
  addressing:
    # The iDrac/iLo IP of the node. It's important that this match up with the
    # node's hostname above, so that the rack number and node position encoded
    # in the hostname are accurate and matching the node that IPMI operations
    # will be performed against (for poweron, poweroff, PXE boot to wipe disk or
    # reconfigure identity, etc - very important to get right for these reasons).
    # These addresses should already be assigned to nodes racked and stacked in
    # the environment; these are not addresses which MaaS assigns.
    - network: oob
      address: 10.10.150.12
    # The IP of the node on the DMZ network. Refer to the static IP range
    # defined for the Admin network in networks/physical/networks.yaml.
    - network: dmz
      address: 10.10.150.22
    # The IP of the node on the Admin network. Refer to the static IP range
    # defined for the Admin network in networks/physical/networks.yaml.
    # This network is used for PXE bootstrapping of the bare-metal servers.
    - network: admin
      address: 10.10.151.22
    # The IP of the node on the Private network. Refer to the static IP range
    # defined for the Private network in networks/physical/networks.yaml.
    - network: private
      address: 10.10.152.22
    # The IP of the node on the Storage network. Refer to the static IP range
    # defined for the Storage network in networks/physical/networks.yaml.
    - network: storage
      address: 10.10.153.22
    # The IP of the node on the Management network. Refer to the static IP range
    # defined for the Management network in networks/physical/networks.yaml.
    - network: management
      address: 10.10.154.22
  # NEWSITE-CHANGEME: Set the host profile for the node.
  # Note that there are different host profiles depending if this is a control
  # plane vs data plane node, and different profiles that map to different types
  # hardware. Select the host profile that matches up to your type of
  # hardware and function. E.g., the r720 here refers to Dell R720 hardware, the
  # 'cp' refers to a control plane profile. Refer to profiles/host/ for the list
  # of available host profiles specific to this site (otherwise, you may find
  # a general set of host profiles at the "type" or "global" layers/folders.
  # If you have hardware that is not on this list of profiles, you may need to
  # create a new host profile for that hardware.
  host_profile: cp-intel-pod15
  metadata:
    tags:
      # NEWSITE-CHANGEME: See previous comment. Apply 'masters' tag for control
      # plane node, and 'workers' tag for data plane hosts.
      - 'masters'
    # NEWSITE-CHANGEME: Refer to site engineering package or other supporting
    # documentation for the specific rack name. This should be a rack name that
    # is meaningful to data center personnel (i.e. a rack they could locate if
    # you gave them this rack designation).
    rack: pod15-rack
...
---
schema: 'drydock/BaremetalNode/v1'
metadata:
  schema: 'metadata/Document/v1'
  # NEWSITE-CHANGEME: The next node's hostname
  name: pod15-node3
  layeringDefinition:
    abstract: false
    layer: site
  storagePolicy: cleartext
data:
  # NEWSITE-CHANGEME: The next node's IPv4 addressing
  addressing:
    - network: oob
      address: 10.10.150.13
    - network: dmz
      address: 10.10.150.23
    - network: admin
      address: 10.10.151.23
    - network: private
      address: 10.10.152.23
    - network: storage
      address: 10.10.153.23
    - network: management
      address: 10.10.154.23
  # NEWSITE-CHANGEME: The next node's host profile
  host_profile: cp-intel-pod15
  metadata:
    # NEWSITE-CHANGEME: The next node's rack designation
    rack: pod15-rack
    # NEWSITE-CHANGEME: The next node's role desigatnion
    tags:
      - 'masters'
...
---
schema: 'drydock/BaremetalNode/v1'
metadata:
  schema: 'metadata/Document/v1'
  # NEWSITE-CHANGEME: The next node's hostname
  name: pod15-node4
  layeringDefinition:
    abstract: false
    layer: site
  storagePolicy: cleartext
data:
  # NEWSITE-CHANGEME: The next node's IPv4 addressing
  addressing:
    - network: oob
      address: 10.10.150.14
    - network: dmz
      address: 10.10.150.24
    - network: admin
      address: 10.10.151.24
    - network: private
      address: 10.10.152.24
    - network: storage
      address: 10.10.153.24
    - network: management
      address: 10.10.154.24
  # NEWSITE-CHANGEME: The next node's host profile
  host_profile: dp-intel-pod15
  metadata:
    # NEWSITE-CHANGEME: The next node's rack designation
    rack: pod15-rack
    # NEWSITE-CHANGEME: The next node's role desigatnion
    tags:
      - 'workers'
...
---
schema: 'drydock/BaremetalNode/v1'
metadata:
  schema: 'metadata/Document/v1'
  # NEWSITE-CHANGEME: The next node's hostname
  name: pod15-node5
  layeringDefinition:
    abstract: false
    layer: site
  storagePolicy: cleartext
data:
  # NEWSITE-CHANGEME: The next node's IPv4 addressing
  addressing:
    - network: oob
      address: 10.10.150.15
    - network: dmz
      address: 10.10.150.25
    - network: admin
      address: 10.10.151.25
    - network: private
      address: 10.10.152.25
    - network: storage
      address: 10.10.153.25
    - network: management
      address: 10.10.154.25
  # NEWSITE-CHANGEME: The next node's host profile
  host_profile: dp-intel-pod15
  metadata:
    # NEWSITE-CHANGEME: The next node's rack designation
    rack: pod15-rack
    # NEWSITE-CHANGEME: The next node's role desigatnion
    tags:
      - 'workers'
...